Related
I cannot wait for the official galaxy S3 wireless charging kit to come out.
I got inspired by the Galaxy mod that was done by using parts from a Palm Touchstone cover.
ww.qianqin.de/2011/09/28/high-waf-inductive-charging-mod/
I am pretty sure, that I don't need to do an intrusive operation as the one in the link - I believe that Samsung made pins ready for it under the cover.
Does anyone know what the two 'pins' that are exposed to the left of the battery are for?
Thanks!
There are countless threads regarding the "pins", wireless charging kits, and that mod.
I have a touchstone. And a back, and would like to see if anyone has applied this to the S3 and made it work
Sent from my GT-I9300 using xda premium
I have a feeling the wireless charging module will interact somehow with the two pins next to the battery. I was planning on attempting this mod using these pins but without a multimeter i am unable to tell whether these pins can be used and which way round to wire them up. If anyone can assist i would be grateful.
BungeBash said:
There are countless threads regarding the "pins", wireless charging kits, and that mod.
Click to expand...
Click to collapse
Yes. Countless threads about the mod for the Galaxy S, but I haven't been able to find anything about pins on the Galaxy SIII.
- Maybe I'm just bad at searching, believe me I have tried!
I also would love to know if and how someone gets their sgs3 working with the palm touchstone! Hope it is not too difficult!
pcyyijb said:
I have a feeling the wireless charging module will interact somehow with the two pins next to the battery. I was planning on attempting this mod using these pins but without a multimeter i am unable to tell whether these pins can be used and which way round to wire them up. If anyone can assist i would be grateful.
Click to expand...
Click to collapse
I have finally managed to find a page that claimt that the two pins next to the battery indeed are for wireless charging.
ww.trustedreviews.com/samsung-galaxy-s3_Mobile-Phone_review
Only problem is, I don't know Trusted Reviews - so I don't know how 'Trusted' they are?
All I need now is to find out which pin is 0V and which is +5V. (I'm pretty sure that the current is the same as the Palm cover provides.
Every accessories are always made for on pin, hdmi,wireless kit etc. Always Samsung market tactics.
I wish you'll do it.
Upper pin is plus, lower minus - and it has also be done!
http://www.android-hilfe.de/zubehoe...-samsung-galaxy-s3-ohne-kabel-aufladen-6.html
I'm also trying to do that, hopefully it works
N23 said:
Upper pin is plus, lower minus - and it has also be done!
http://www.android-hilfe.de/zubehoe...-samsung-galaxy-s3-ohne-kabel-aufladen-6.html
I'm also trying to do that, hopefully it works
Click to expand...
Click to collapse
Yes it works, it will be a little slower, im only seeing 450mah going in as opposed to about 1000mah
But that doesnt matter in the slightest as i mostly charge overnight
that is great news! That does not look too difficult and it looks as NFC is not touched. Just the translation is difficult and not knowing what samsung wireless charging is about.
I also wonder how snug the fit is after adding the magnets from the touchstone back cover?
I will post details soon when i am back home
Sent from my GT-I9300 using xda premium
I'm still waiting for my touchstone and palm battery cover to arrive...
I found this! He looks like he did a great job. I am just curious if he had to solder anything to the phone?
http://www.youtube.com/watch?v=uAqP3T_Mbzg
yes he did, i'm gonna try it with just tape - his solder blobs seems to be huge and because of the the cover makes this bulge... maybe then it will fit perfectly
the samsung wireless charger looks nice but i like the idea with the magnets of the touchstone!
please post pictures and a possible video. This is so interesting!
i'll do as soon i get the touchstone kit and have some spare time to do this (hopefully on sunday...)
what happens when you place an induction charging compatible device on an induction cooking range? Will it charge the battery, or will it overload the circuitry and destroy the phone\battery?
I wonder what happens when you plug in the phone with usb while it's inductively charging.
Zabalba said:
I wonder what happens when you plug in the phone with usb while it's inductively charging.
Click to expand...
Click to collapse
I would think they would work together or one would be disabled by the other. Don't think they would allow both if it could cause damage.
Sent from my SPH-D710 using Tapatalk 2
Here is my review video! I am a huge fan of the palm touchstone wireless charging mod and this is the best way to get it...
http://youtu.be/NGvyWBOQy0U
Nice, couple questions.
Do you use a case? I have an Otterbox Commuter and was wondering if that is thin enough to still register.
Also, will that back cover work on the Energizer Qi charging system?
Sent from my SPH-L710 using xda app-developers app
Thanks for the video!, few questions tho:
Does it work with a case (I imagine this will be a popular question)
Is the quality of the back cover noticeable different to the stock back cover? Or is it a completely stock totally 100% the same back cover with the wireless charging mod?
And what charging pad do you recommend?
Unfortunately I do not use cases as I just use a clear shield so I have no idea if it works with otterbox or any case.
This mod will not work with any pad. It will only work with the Palm Touchstone. I dont recco any pad as I only recco the touchstone. I like having one in my car, at the office and one on the nightstand.
stu5797 said:
Unfortunately I do not use cases as I just use a clear shield so I have no idea if it works with otterbox or any case.
This mod will not work with any pad. It will only work with the Palm Touchstone. I dont recco any pad as I only recco the touchstone. I like having one in my car, at the office and one on the nightstand.
Click to expand...
Click to collapse
Can you try just putting something a few mm's thick between the phone and the charge pad and seeing if it still charges?
i got this mod with a 3mm thin case from ebay. they work perfectly.
Sent from my GT-I9300 using xda app-developers app
It works with a few mm but not sure how that affects charging. Please dont just take my word for it. Dont want you spending 30 on a back cover you cant use. But if it doesnt work i will buy it from ypu for a major discount. Lol
I dont believe qi is the way to go. The new nexus has wireless charging like the touchstone. I wonder if its compatible?
probably not. afaik, each of these wireless charging is proprietary and most probably incompatible with each other. The touchstone will only work with touchstone products (atleast from what I understand, it's different frequencies and also component parts differences)
You are probably right but i hope you are wrong... either way i am so surprised more phones dont charge like this.
Nexus 4 Qi
check out the news regarding Nexus 4 Qi "Orb" in this forum at "Qi Wireless accessories " Post# 136 on page 14 (http://forum.xda-developers.com/showthread.php?t=1933523)
Hi axel. Is there any source to your news?
Nexus4 Qi
stu5797 said:
Hi axel. Is there any source to your news?
Click to expand...
Click to collapse
To name a few:
http://techcrunch.com/2012/10/29/here-are-the-official-specs-for-the-nexus-4-and-nexus-10/
http://techwhack.com/google-nexus-4-supports-qi-wireless-charging-tech-5300/
http://www.phonearena.com/news/Google-announces-Wireless-Charging-Orb-for-the-Nexus-4_id36060#1-
Google Nexus 4 Wireless
Now on Google's website as well:
https://play.google.com/store/devices/details?id=nexus_4_8gb&feature=microsite
mputtr said:
probably not. afaik, each of these wireless charging is proprietary and most probably incompatible with each other. The touchstone will only work with touchstone products (atleast from what I understand, it's different frequencies and also component parts differences)
Click to expand...
Click to collapse
Frequencies have anything to do with it. I'm pretty sure inductive charging uses magnetic fields to charge your device hence the giant coil in the phone cover. BUT, each base is most likely specific to it's counter part coil as different size coils will charge at different rates from the magenet in the base vs the amount of voltage and amps they put through the magnet. So it would make sense if a say Powermat didn't work with a Touchstone coil.
On the other hand, the touchstone uses a standard phone charger so it has a maximum of 5V at 1amp. I do not know what power source the Duracell Powermat uses (looked a little but didn't search long) so if it were to use a higher voltage at the same amps or higher amps at the same voltage then it may charger your phone faster.
NOTE: It should also be noted that if you use a different charging source with the touchstone base you could end up generating a different level of voltage and in turn damage your phone. It's not recommended to do this. The downfall (that I have found) with the touchstone setup is that it WILL charge through thin TPU cases and my Rock Quicksand case BUT the magnet is not strong enough to hold the phone in place. Since the touchstone is angled and not flat the phone starts to slide down and charging stops.
You can always switch out the magnets so your phone sits better on the touchstone. Its easy to change and it can make a nice diference.
Just ordered one. Touchstone rules.
@setzer715
that's an interesting read. thanks for clarifying the differences. I skimmed on articles about different wireless charging tech and remembered a few mentions of frequencies.
If only there is a standard that can adapt or provide compatibility with other methods... but that would probably drive up costs and probably extend r&d time.
Sent from my GT-I9300 using xda app-developers app
mputtr said:
@setzer715
that's an interesting read. thanks for clarifying the differences. I skimmed on articles about different wireless charging tech and remembered a few mentions of frequencies.
If only there is a standard that can adapt or provide compatibility with other methods... but that would probably drive up costs and probably extend r&d time.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
may be in the future a multi format will be available.:fingers-crossed:
Hello.
I'm using the same charger with my i9300. But it charging the phone too long
Also I have removed a wireless charging module from a custom back cover and install it on my original i9300 back cover.
Hey guys, don't know if people have done this already, but I just got a T-mobile S4 for testing this weekend and I wanted to find out if the wireless charging port was enabled since I've done the touchstone wireless charging mod on my S3 and note 2.
It was especially a PIA on the note 2 since T-mobile, in all of its corporate and engineering wisdom, decided to disable the feature for the Note 2, even though it was enabled for the S3. So for those of you who don't like to dissemble your new phone and solder on a tiny PCB, you'll be happy to know that I confirmed that wireless charging ports on the S4 is indeed enabled.
I took a pack of 4x AAA battery assembly, which provides ~4.7v of DC power, and connected to the charging port in the back. The small pair on the left is the charging port, the pair on the right is supposedly NFC, even though the NFC antenna is located on the battery for S4.
As you can see from the pics, the "the phone is now charging wirelessly" notification pops up when the circuit is live, which is pretty annoying IMO and can't be disabled (that's why we have custom roms right?)
I haven't gotten a chance to install the actual touchstone wireless charging receivers on the back yet, as this is a test unit that I have to return, but I don't imagine this to be too different than on the S3. There will be a slight bulge, but it'll be worth it.
How do I put this mod in use
Sent from my SGH-M919 using xda app-developers app
Tried it with my Qi charger from Energizer and it's doing absolutely nothing.
RonDigital828 said:
How do I put this mod in use
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Just follow the instructions from this thread (it's for an S3). The design for S3 is pretty similar, so it should work. Remember the positive pin is on the left, negative (ground) is on the right.
Also note that the touchstone mechanism is not Qi compatible, so it wont work with the newer charging mats for Nokia or HTC.
And always remember to perform these mods at your own risk.
mattlgroff said:
Tried it with my Qi charger from Energizer and it's doing absolutely nothing.
Click to expand...
Click to collapse
Did you install any receiver on the S4?
I didn't mean to confuse anyone, I only confirmed that it is POSSIBLE to perform the mod. I used a 4.7v DC power supply to test if the wireless charging pins on the back are live, which wasn't the case for T-mobile note 2 so I had to check to make sure.
If you already have a Qi charger, you can get one of these receivers and connect it to your phone, then you'll be able to charger with your mat
http://www.ebay.com/itm/qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item51abef6de9
But I would argue that the touchstone method is superior to qi if you plan on using it in a car, as the magnets keep the phone in place is it's really convenient to connect/disconnect when you're driving.
ncc1701k said:
Did you install any receiver on the S4?
I didn't mean to confuse anyone, I only confirmed that it is POSSIBLE to perform the mod. I used a 4.7v DC power supply to test if the wireless charging pins on the back are live, which wasn't the case for T-mobile note 2 so I had to check to make sure.
If you already have a Qi charger, you can get one of these receivers and connect it to your phone, then you'll be able to charger with your mat
http://www.ebay.com/itm/qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item51abef6de9
But I would argue that the touchstone method is superior to qi if you plan on using it in a car, as the magnets keep the phone in place is it's really convenient to connect/disconnect when you're driving.
Click to expand...
Click to collapse
I was under the impression the S4 had wireless charging built in, whoops.
Me too!!!
That was a disappointment!!! :banghead:
DEVICES:
NEXUS 7 32GB STOCK
(NO ROOT)
T-MOBIL LG G2X (LG-P999)
STOCK (ROOTED)
Sent from my LG-P999 using xda premium
mattlgroff said:
I was under the impression the S4 had wireless charging built in, whoops.
Click to expand...
Click to collapse
Samsung will be officially supporting wireless charging for the S4 through accessories. The ad for the pad and back wireless charging cover is already listed on the promo S4 accessories page. http://www.samsung.com/global/microsite/galaxys4/
Though there seems to be no price or date yet.
Of course there will be 3rd party wireless charging solutions as well.
ive got a palm touchstone but what receiver do i need to buy to have my GS4 work with it ?
also;
can anyone confirm or deny wether or not the palm touchstone + receiver will trickle charge the GS4 after it is fully charged ? (or does it completely cease charging until the phone is physically picked up and replaced ?)
wavrunrx said:
ive got a palm touchstone but what receiver do i need to buy to have my GS4 work with it ?
also;
can anyone confirm or deny wether or not the palm touchstone + receiver will trickle charge the GS4 after it is fully charged ? (or does it completely cease charging until the phone is physically picked up and replaced ?)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1877191
the link above is the thread with a tutorial on how to do the mod for S3, should apply to S4 as well.
I can confirm that it trickle charge S3 and Note 2 ( if I understood you correctly, it will keep the phone charged as long as it's on the touchstone base), shouldnt be any different for S4.
ncc1701k said:
http://forum.xda-developers.com/showthread.php?t=1877191
the link above is the thread with a tutorial on how to do the mod for S3, should apply to S4 as well.
I can confirm that it trickle charge S3 and Note 2 ( if I understood you correctly, it will keep the phone charged as long as it's on the touchstone base), shouldnt be any different for S4.
Click to expand...
Click to collapse
ok cool;
but.
i did the mod for the s3....... twice.
it didnt work out; so id rather just buy a pre-made module; do you know what one i can use fro the s4 ?
wavrunrx said:
ok cool;
but.
i did the mod for the s3....... twice.
it didnt work out; so id rather just buy a pre-made module; do you know what one i can use fro the s4 ?
Click to expand...
Click to collapse
I havent tried the premade modules yet, but the do look quite a bit thinner
try this
http://www.ebay.com/itm/Samsung-Gal...S_Cell_Phone_PDA_Chargers&hash=item232a7f9413
yeah it's not the easier mod to do and def took me quite a few tries too
Took the Qi wireless receiver pad from my Galaxy S3, had to slightly tear it apart to reverse the little gold inserts that create the contact points for the wireless battery charging and now have a fully functioning wireless charging Galaxy S4 !
Saved myself quite a bit of money doing that.
alexnader said:
Took the Qi wireless receiver pad from my Galaxy S3, had to slightly tear it apart to reverse the little gold inserts that create the contact points for the wireless battery charging and now have a fully functioning wireless charging Galaxy S4 !
Saved myself quite a bit of money doing that.
Click to expand...
Click to collapse
Can you post some pictures.
Thanks in advanced.
Sent from my SGH-M919 using xda app-developers app
it is not easy for nomal people to change the phone like this. if there's no official support,
most of people will not care that.
although , i like wireless charging very much
michaeljimmy said:
it is not easy for nomal people to change the phone like this. if there's no official support,
most of people will not care that.
although , i like wireless charging very much
Click to expand...
Click to collapse
It seriously only took 5~10 minutes once I'd figured out which way to put what.
I have the photos set up and just need to put notes on them explaining what I did.
Will post them when I get home tonight (12am CT)
Ummmm, from everything I read the pins you have it hooked up to are NOT the ones for inductive charging, the gold ones on the right are......
I could be mistaken however. I remember the s3 used those pins, but I've read in a couple places that the ones made specifically for inductive charging are the ones on the right above the battery.
TeknoGodz said:
Ummmm, from everything I read the pins you have it hooked up to are NOT the ones for inductive charging, the gold ones on the right are......
I could be mistaken however. I remember the s3 used those pins, but I've read in a couple places that the ones made specifically for inductive charging are the ones on the right above the battery.
Click to expand...
Click to collapse
What ARE all the other pins back there for? I figured one set (had no idea which one) was for inductive charging, but couldn't figure a reason for the others..
coyttl said:
What ARE all the other pins back there for? I figured one set (had no idea which one) was for inductive charging, but couldn't figure a reason for the others..
Click to expand...
Click to collapse
the smaller set is wireless charging, the larger set is presumably for additional NFC antenna (although I measured no resistance in the circuit with my voltmeter), as the back cover seemed to have a carved out area for a NFC like the Note 2 did.
Although the S4 battery says "NFC" on it, which seems like samsung made a last minute decision to put NFC on the battery instead of the back cover... oh samsung ¯\_(ツ)_/¯
ncc1701k said:
the smaller set is wireless charging, the larger set is presumably for additional NFC antenna (although I measured no resistance in the circuit with my voltmeter), as the back cover seemed to have a carved out area for a NFC like the Note 2 did.
Although the S4 battery says "NFC" on it, which seems like samsung made a last minute decision to put NFC on the battery instead of the back cover... oh samsung ¯\_(ツ)_/¯
Click to expand...
Click to collapse
Nope, the NFC is in fact in the battery, the same way Samsung has been doing it for years now. They made no change.
Oh false information from people that don't know what they're talking about ¯\_(ツ)_/¯
I have been reading some very interesting posts about adding wireless charging capabilities to a Samsung Galaxy Nexus. Although it seems like every mod requires a touchstone coil, which also requires a larger back cover. Browsing ebay I ran across a "patch" of sorts that goes between the case and the battery to add the inductive charging. I was wondering before I buy it and rip apart my beloved phone. Could I just solder the "patch" to the pogo pins on the side of the phone and would it charge? Or am I missing a component? Thanks in advance for any help!
On Ebay it is called "Qi Wireless Charger Charging Pad + Receiver Kit for Samsung Galaxy S4 S IV i9500"
Also this is my first post, so any comments would be helpful too!
Isn't it for the s4? So I assume it doesn't work on the Galaxy Nexus..
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
Isn't it for the s4? So I assume it doesn't work on the Galaxy Nexus..
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
That's what mods are all about, people have successfully mod the palm touchstone coil into their phone and it works flawlessly.
In theory this would work, but how OP are going to connect it to the pogo pins, that's another problem.
Beamed from my Grouper
Oho Thank you. it very good
Well I was thinking that if you take the phone apart there is a spot where the pogo plugs connect to the circuit board. I thought I could just solder a thin gage wire to the leads, but does that patch have the correct circuits to supply 5v with the right amount of amps?
Sent from my Galaxy Nexus using xda app-developers app
mjz2207 said:
Well I was thinking that if you take the phone apart there is a spot where the pogo plugs connect to the circuit board. I thought I could just solder a thin gage wire to the leads, but does that patch have the correct circuits to supply 5v with the right amount of amps?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Check the specs of the induction charger.
Anyway for the touchstone mod, others used a copper tape instead of a wire.
Beamed from my Maguro.
I have a s3 a couple of the s3 qi cards. I have my gnex as a backup and did the mod myself. If you peal the top label off the card around the pins you'll be able to desolder the s3 connector and solder a couple wires. I used a couple fine wires I removed from a old ide cable. I then used a dremel tool to cut a small rectangle under the battery door and behind the pogo pins to connect the wires. I used a very small cut off wheel, took my time, and cut shallow and never took the phone apart. The pins are easy to solder to and much safer. This did disable my pogo pins, but I have no dock so I don't care. I have the Samsung OEM 2000mah extended battery and back cover. This leaves me a small gap to lay my wires without any battery door bulge. My ditztronic case still fits perfect and the wireless charging works great. Its worth noting that the qi pad will provide around 600ma, which is fine since the dock pins charge in USB mode anyway.
BTW, while I think the safest and easiest way to get to the phone's circuitry is to cut that small hole, you are putting a dremel to your phone so I am in no way responsible if you somehow kill your phone.
Sent from my Nexus 7 using Tapatalk 2
I got wireless charging on my gnexus
I struggled with this issue for a VERY LONG TIME and I got it down now. I made a video on how I get wireless charging on my G.Nexus easily. I even posted the links to the stuff in the description. The method is universal. I can't post links to outside sources so heres how you get to my video.
In Google search type in : #mynameisterrance. The find my profile on G+ (Terrance Johnson) and go to my Youtube videos.
mynameisterrance said:
I struggled with this issue for a VERY LONG TIME and I got it down now. I made a video on how I get wireless charging on my G.Nexus easily. I even posted the links to the stuff in the description. The method is universal. I can't post links to outside sources so heres how you get to my video.
In Google search type in : #mynameisterrance. The find my profile on G+ (Terrance Johnson) and go to my Youtube videos.
Click to expand...
Click to collapse
Sounds good, let me check and give and try.
Hi folks,
I've been looking into wireless charging because, I thought, I could set up my phone to charge wireless; that is, across the room, for example. However, upon closer inspection, it looks like I'd be relegated to setting the device on a "base" in order for it to charge. Now, perhaps I was naive (or dumb) in thinking that I could chat away on the phone or otherwise keep it at my desk while some special hardware emits energy through the air to charge my device(s), but I can't for the life of me figure out what the big deal is about putting my phone on a base—that's connected to the wall(!)—to charge my phone in a manner that's less efficient than hooking it up to our 3.0 cable (which, I might add, charges my phone from the red to full in about a half hour). After all, to even take advantage of this charging method we have to buy a special battery, equipment, and even a new case that's compatible with the charger. I just don't get the value...
So, I defer to the community to enlighten me--what do you think of the setup and what benefits do you see form your investment? Also, do you notice a difference in battery performance compared to the stock battery?
Thanks,
R
Wireless charging is not worth it. IMHO.
the best i seen wireless charging is 0.8-1.0 amps which is nowhere near the 2 amps that is more or less required to charge at a fast rate in a decent amount of time from 0 to full.
Yes, it is not as fast as plugging it in but it is great for the purpose of convenience. Just drop it on the charger when you are not looking at your phone... just one downside: the charging back makes the phone thicker and you cannot use most of the cases. If you dont mind a naked phone, go for it.
onurd said:
Yes, it is not as fast as plugging it in but it is great for the purpose of convenience. Just drop it on the charger when you are not looking at your phone... just one downside: the charging back makes the phone thicker and you cannot use most of the cases. If you don't mind a naked phone, go for it.
Click to expand...
Click to collapse
reasonable question if you drop that on the pad and just leave and not go back what would it matter if it was plugging and and left? then you'll come back to a more of a charged phone lol
i use my phone all the time. to have a wireless charger is pointless to me since i cannot use it while its charging, its worthless. using the wired method not only lets me charge but also use my device as needed. its 100% crap if you ask me.... unless you're the type of person that doesnt use their device all the time and can be away from it for 3 hours +
I have the (Fast Charging)CHOE Qi Wireless Charger Kit. Didn't have to change any of my OEM. It is slower than the cord but I usually charge overnight anyway. I like grabbing it right out of bed and going. It's 50/50 for me. Probably didn't need it but now that I have it, it's cool. I got it off Amazon so it wasn't that expensive.
Sent from my SM-N900T using xda app-developers app http://www.inflewential.com
Plugged is the way to go.
Until they come out with a wireless method like you stated (without leaving it on the charger) then I will just stick with the wire.
is it worth it to buy official equipment for wireless charging? no
is it worth it if you buy after market? yes! less than $25 bucks and you can have a wireless charger. yes it won't charge as fast as a plugged in charger but if you are charging overnight and want to protect your usb ports, check emails thru the night (i do it for business), and don't necessarily like wires on the side of your bed, i can't see a reason not to.
mixxy said:
is it worth it to buy official equipment for wireless charging? no
is it worth it if you buy after market? yes! less than $25 bucks and you can have a wireless charger. yes it won't charge as fast as a plugged in charger but if you are charging overnight and want to protect your usb ports, check emails thru the night (i do it for business), and don't necessarily like wires on the side of your bed, i can't see a reason not to.
Click to expand...
Click to collapse
I can definitely agree to that. I like a wire free mess on my night stand as well.
Sent from my SM-N900T using Tapatalk
Comes in handy when charging at night no need for a cable... Wireless charger is Shhhhnice!
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
ROADKING17 said:
Comes in handy when charging at night no need for a cable... Wireless charger is Shhhhnice!
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
Click to expand...
Click to collapse
It's not so wireless when you pick up the phone and stops charging. Again what's the point if you're not going to use the phone how was the cable gonna mess anything up.
Sent from my SM-N900T using xda app-developers app
Easier way to charge at my desk or night stand maybe I don't wanna bend down and grab the wire then plug it in, call me lazy but I like it. I had a s3 and s4 before try plugging in the wire into the device without turning the lights on in the dark, my s3 was cracked from the charging port area of phone all because it was dark and I'm trying to plug it in
SENT FROM MY SM-N900T/NEXUS 5 USING TAPATALK
inflewence said:
I have the (Fast Charging)CHOE Qi Wireless Charger Kit. Didn't have to change any of my OEM. It is slower than the cord but I usually charge overnight anyway. I like grabbing it right out of bed and going. It's 50/50 for me. Probably didn't need it but now that I have it, it's cool. I got it off Amazon so it wasn't that expensive.
Sent from my SM-N900T using xda app-developers app http://www.inflewential.com
Click to expand...
Click to collapse
Can you link to the kit if you don't mind? I'm a bit paranoid about most aftermarket power accessories. Nice to hear about one that works.
Sent from my SM-N900T using Tapatalk
From the moderator
To all in this thread post respectfully or do not post, if you are unsure what respectfully means look it up in a dictionary.
Thank you ~~ oka1
phil.culler said:
Can you link to the kit if you don't mind? I'm a bit paranoid about most aftermarket power accessories. Nice to hear about one that works.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
No problem http://www.amazon.com/Charging-Wire...arging+Pad+and+Wireless+Charging+Receiver ...charger
I don't have some of the cons that the reviews talk about. My phone doesn't get really hot. I don't have the little bump in the back cover. It doesn't come with a plug but does come with the USB cord. I just use the original plug.
Sent from my SM-N900T http://www.inflewential.com
inflewence said:
No problem http://www.amazon.com/Charging-Wire...arging+Pad+and+Wireless+Charging+Receiver ...charger
I don't have some of the cons that the reviews talk about. My phone doesn't get really hot. I don't have the little bump in the back cover. It doesn't come with a plug but does come with the USB cord. I just use the original plug.
Sent from my SM-N900T http://www.inflewential.com
Click to expand...
Click to collapse
Thanks, I've been looking to get a wireless charger for quite some time, maybe this will be the one.
Sent from my SM-N900T using Tapatalk
The benefit is 2 fold for me:
1) Ease. I have a Panasonic base that adjusts it's coil to line up with the phone so at night I just drop my phone on the base and KNOW that it's charging. Better than fumbling with a cable in the dark.
2) Less physical wear on the micro USB connector.
While not a wireless charger, the Amazon 9w speed charger & the Samsung USB 3.0 wire charge my phone super fast.
Wireless Charging
I did it just for the novelty factor initially. It was a good thrill, DIY mod types.
But later, I realized it is actually useful for me. I usually walk around while talking, and with Wired charger, I had to plug/unplug again and again after every call. Also, many times after unplugging, the wire slides down, and I actually have to crouch below my desk to recover it (call me sloppy, hehe). With Wireless charging, I just talk, place it back on the pad, nothing to worry about. It keeps charging while I do my work, and I also save the port (I've had port failing problems with other phones before).