[Q] Help with Odin Flashing! (n00b) - Sprint Samsung Galaxy S III

Guys, forgive me, my noobness. Trying to fix shutter sound on GSIII.
I downloaded the 7z extractor, I downloaded Odin for GSIII, and I extracted the flash for the camera shutter fix.
But I can't flash it through Odin, because after I extracted the shutter fix, it became an .exe file, not a .tar file.
How do I fix this, or perhaps extract it correctly, to make sure I'm getting the .tar file?
Thanks!

k-bomberman said:
Guys, forgive me, my noobness. Trying to fix shutter sound on GSIII.
I downloaded the 7z extractor, I downloaded Odin for GSIII, and I extracted the flash for the camera shutter fix.
But I can't flash it through Odin, because after I extracted the shutter fix, it became an .exe file, not a .tar file.
How do I fix this, or perhaps extract it correctly, to make sure I'm getting the .tar file?
Thanks!
Click to expand...
Click to collapse
Leave the fix as a .tar file. Then flash via Odin. Should solve the problem.

Its an odin one-click. Just run the exe

billard412 said:
Its an odin one-click. Just run the exe
Click to expand...
Click to collapse
Yeah i didn't even catch that one Lol.. Thanks. But as was said.. Run the EXE, toss phone into Odin mode (Download mode) and go for it. :laugh:

Gotcha.
So, it sounds like I don't even need Odin?
1. Open .exe.
2. Connect phone, put in DL mode.
3. Run program inside EXE.
Is that right? I'm sorry for how dumb this must sound. I'm a little more tech-savvy than your average person, but this stuff is a foreign language to me.

k-bomberman said:
Gotcha.
So, it sounds like I don't even need Odin?
1. Open .exe.
2. Connect phone, put in DL mode.
3. Run program inside EXE.
Is that right? I'm sorry for how dumb this must sound. I'm a little more tech-savvy than your average person, but this stuff is a foreign language to me.
Click to expand...
Click to collapse
The one click will automatically open Odin and have the file ready to go. Just gotta plug and play phone. (Plug in when phone in download mode, hit the start button, and profit)

Related

[Need Guidance] Root updated S4 with Mac.

Hi pals,
This is one of those "I'm too busy to research A, B and C, please feed it to me with a silver spoon?" posts, and for that, I'm sorry.
I'm working a lot lately, but I just bought my S4 and have come to understand that in order to root it with the May 7th update, I must follow different instructions. The problem is, I need to do this on a Mac, and therefore need to use Heimdall to do it. Not only do I not know anything about Heimdall, but I've been out of touch with the rooting/ROMming scene for a while now.
Could someone please sum up a step-by-step for a Mac user trying to root their S4 that's got the May 7th update on a Mac?
Go to an Internet Cafe or something.
Not being a jerk, but i'd rather go to kinko's than do it with a mac
That being said check out zedomax's
Video
Sent from my SGH-M919 using xda app-developers app
---------- Post added at 09:09 PM ---------- Previous post was at 09:09 PM ----------
http://forum.xda-developers.com/showthread.php?t=2252500
Sent from my SGH-M919 using xda app-developers app
Android_Monsters said:
Go to an Internet Cafe or something.
Not being a jerk, but i'd rather go to kinko's than do it with a mac
That being said check out zedomax's
Video
Click to expand...
Click to collapse
Unfortunately this is a matter of not having time on my hands. I have these random little bits of 10 minutes here and there in my life lately and I can only hope to root this phone during one of them lol
I'm going to Google this video though, really appreciate the heads up.
Edit: After searching, are one of these videos Mac specific and geared towards post-May 7th-update users? They're all kind of looking the same to me and I can't open them all.
re: Heimdall flash
caffeineighted said:
Hi pals,
This is one of those "I'm too busy to research A, B and C, please feed it to me with a silver spoon?" posts, and for that, I'm sorry.
I'm working a lot lately, but I just bought my S4 and have come to understand that in order to root it with the May 7th update, I must follow different instructions. The problem is, I need to do this on a Mac, and therefore need to use Heimdall to do it. Not only do I not know anything about Heimdall, but I've been out of touch with the rooting/ROMming scene for a while now.
Could someone please sum up a step-by-step for a Mac user trying to root their S4 that's got the May 7th update on a Mac?
Click to expand...
Click to collapse
Download this Heimdall Suite for MAC here: https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-suite-1.3.2-mac.dmg
After it's downloaded install the suite.
The Suites package contains the frontend which uses a Graphical User Interface simular to Odin for windows.
Here is the link for the STOCK Tmobile Heimdall flashable Samsung Galaxy S4 Touchwiz Jellybean 4.2.2 official firmware:
http://k0nane.info/rom/M919UVUAMDL_M919TMBAMDL_TMB.zip
After you download the firmware, unzip and extract the TAR file and then extract all the files which are inside the TAR file
into a new folder on your computers desktop.
Be sure that you have installed the proper samsung usb drivers for your phone before trying to use Heimdall.
Download and Install the Heimdall Suite. (this is a Odin replacement for the MAC)
Using Heimdall
Step 1: Run/Execute “heimdall-frontend”
Step 2: When Heimdall opens there will be different slots to put files into, the filenames correspond to the name of the slots.
Navigate to the new folder on your desktop which has all the files you have extracted out of the .tar file
Example: Under FactoryFS click browse and find the FactoryFS.rfs file that you extracted out of the .tar file into your new folder.
When you’re finish double check that the correct files are in the correct slots.
Make sure that you do not checkmark the repartition device!
Step 3: Check to be sure that all the necessary files are in the right slots and the necessary checkboxes are checked.
When you’re finish reboot your phone into download mode and connect it to the usb port that you installed the drivers to.
Wait for about 5 secs. to let your computer recognize that your phone is plugged in the usb then click START.
Wait for Heimdall to complete finish the flashing.
You should get a “flash completed successfully” after it's done and the phone will now restart.
Good Luck!
Misterjunky said:
Good Luck!
Click to expand...
Click to collapse
Hey thank you so much for laying that out!
One question; How do you extract the TAR.md5? From what I'm reading, you need a Windows PC and a special application and all this crazy stuff to do it. Can I do it with a Mac application?
Edit: Wait, can I just rename the md5 to zip? Duh?
Edit 2: Yes, you can, I did, and I'm all set lol Gonna go for it now, thank you!
Misterjunky said:
<snip>
Click to expand...
Click to collapse
Ok, so I think I may be having an issue due to using the latest version of Heimdall. I've checked out the guide on Heimdall here and it's based on version 1.1. I have version 1.3.2 and I don't see anywhere to select certain files. All I seem to be able to do under "Flash" is select a PIT file, which I don't have.
I tried to "Load Package" on the first screen, but it's telling me it's not the right file size.
re: MD5
caffeineighted said:
Hey thank you so much for laying that out!
One question; How do you extract the TAR.md5? From what I'm reading, you need a Windows PC and a special application and all this crazy stuff to do it. Can I do it with a Mac application?
Edit: Wait, can I just rename the md5 to zip? Duh?
Edit 2: Yes, you can, I did, and I'm all set lol Gonna go for it now, thank you!
Click to expand...
Click to collapse
Sorry, I forgot about the MD5, just remove the md5 from the filename so the extension is simply .zip
then unzip it into a new folder on your desktop...
And NO you do not need a PC.
Good luck!
---------- Post added at 07:09 AM ---------- Previous post was at 06:55 AM ----------
caffeineighted said:
Ok, so I think I may be having an issue due to using the latest version of Heimdall. I've checked out the guide on Heimdall here and it's based on version 1.1. I have version 1.3.2 and I don't see anywhere to select certain files. All I seem to be able to do under "Flash" is select a PIT file, which I don't have.
I tried to "Load Package" on the first screen, but it's telling me it's not the right file size.
Click to expand...
Click to collapse
It's been so long since I used a mac, I know I am forgetting things.
You need to click the BROWSE box in Heimdall Suite's Front-End which opens another window where you can "navigate"
to the TAR file which is located in the zipfile. (you don't need to use pit or any other files besides the TAR for anything).
Just unzip the ZIP file so Heimdall can see the TAR file when you navigate to it with the Heimdall's Front-End.
Good luck!
Misterjunky said:
Sorry, I forgot about the MD5, just remove the md5 from the filename so the extension is simply .zip
then unzip it into a new folder on your desktop...
And NO you do not need a PC.
Good luck!
Click to expand...
Click to collapse
Ok, haha, I feel so bad because I'm being a pest at this point.
I've got the files, 12 of them, extracted to a folder.
I'm using Heimdall version 1.3.1.
When I open Heimdall-frontend, I'm presented with two options (others are greyed out): Either load a Heimdall Firmware Package under "Load Package" tab, or load a PIT under "Flash"
I see a space for "Partitions (Files)" where I'm assuming I would add the individual files, but again, it's greyed out.
What am I missing here? I checked out the Heimdall guide here and it looks totally different given that it's version 1.1.
re: Heimdall
caffeineighted said:
Ok, haha, I feel so bad because I'm being a pest at this point.
I've got the files, 12 of them, extracted to a folder.
I'm using Heimdall version 1.3.1.
When I open Heimdall-frontend, I'm presented with two options (others are greyed out): Either load a Heimdall Firmware Package under "Load Package" tab, or load a PIT under "Flash"
I see a space for "Partitions (Files)" where I'm assuming I would add the individual files, but again, it's greyed out.
What am I missing here? I checked out the Heimdall guide here and it looks totally different given that it's version 1.1.
Click to expand...
Click to collapse
Do you see a "Browse" box?
Click the BROWSE box and it will be looking for a TAR file which you navigate to.
Also, don't do anything with PIT files, you don't need it and if done wrong or incomplete your phone will be bricked
exactly the same way as if you were to flash a pit file in Odin.
The PIT file is the partition information file, and once that's on your phone it never needs to be replaced or over-written
unless your phone is bricked.
Misterjunky said:
Do you see a "Browse" box?
Click the BROWSE box and it will be looking for a TAR file which you navigate to
Click to expand...
Click to collapse
You're talking about a Browse button under Heimdall Firmware Package? Yes.
Do I just navigate to the TAR.md5 that I extracted from the original zip? Or am I navigating to a TAR file in the folder I made with the 12 files? Because if it's the second one, I don't have any TAR files in there.
Sorry man, I know this is a pain. I really appreciate the help though.
re: heimdall
caffeineighted said:
Hi pals,
This is one of those "I'm too busy to research A, B and C, please feed it to me with a silver spoon?" posts, and for that, I'm sorry.
I'm working a lot lately, but I just bought my S4 and have come to understand that in order to root it with the May 7th update, I must follow different instructions. The problem is, I need to do this on a Mac, and therefore need to use Heimdall to do it. Not only do I not know anything about Heimdall, but I've been out of touch with the rooting/ROMming scene for a while now.
Could someone please sum up a step-by-step for a Mac user trying to root their S4 that's got the May 7th update on a Mac?
Click to expand...
Click to collapse
I think I found something better and easier for you.......
Check this out: https://code.google.com/p/heimdall-one-click/downloads/list
Download and install both of the files, both of them are JAR free standing apps and they work on Mac OR PC since
they are both written in JAVA.
.
I forgot already, but on a PC before these files can be used the latest version of Sun System JAVA has to be installed
or updated..
But I think if I recall correctly, on a mac it's perhaps not needed.
Misterjunky said:
I think I found something better and easier for you.
Click to expand...
Click to collapse
Oh fancy. Java is needed and I'm downloading it now. Thanks. So this is basically the Heimdall suite but simplified?
Misterjunky said:
<snip>
Click to expand...
Click to collapse
So I've got it all running, however, the one-click asks for a "tar.gz file" and I don't have one. I'm reading that the Heimdall front-end creates a tar.gz file, but since browsing to the .zip I originally downloaded leads to an error, I'm not sure how this is done.
re: Heimdall One-Click
caffeineighted said:
Oh fancy. Java is needed and I'm downloading it now. Thanks. So this is basically the Heimdall suite but simplified?
Click to expand...
Click to collapse
Yes, about an hour ago I recalled a guy here on XDA called Adam Outler and he is
the one who designed and made these two JAR Heimdall applications.
He used to be around here in XDA about a year ago and I just recalled his name
about an hour ago because we were talking about MAC and Heimdall.
He made many other projects for us here in XDA who had MAC computers
and had no access to a PC.
Misterjunky said:
Yes, about an hour ago I recalled a guy here on XDA called Adam Outler and he is
the one who designed and made these two JAR Heimdall applications.
He used to be around here in XDA about a year ago and I just recalled his name
about an hour ago because we were talking about MAC and Heimdall.
He made many other projects for us here in XDA who had MAC computers
and had no access to a PC.
Click to expand...
Click to collapse
That's amazing. The never ending kindness of the community at its best lol
I'm still trying to figure out how to make a tar.gz file. I'm understanding that front-end makes it, and I've even watched a video guide, but no one specifies what file to use when you click "Browse..." and choose a file to put in as "Heimdall Firmware File"
I've been using the original .zip I downloaded from the rooting guide, but I get that error about the file being the wrong size or something.
So I tried to download the PIT just to see if I can even make parts of this program work. It failed.
When I researched the error "Claiming interface failed" I found this.
It describes some sort of issue with the fact that I've installed Kies.
Is this part of my problem?
re: Heimdall
caffeineighted said:
That's amazing. The never ending kindness of the community at its best lol
I'm still trying to figure out how to make a tar.gz file. I'm understanding that front-end makes it, and I've even watched a video guide, but no one specifies what file to use when you click "Browse..." and choose a file to put in as "Heimdall Firmware File"
I've been using the original .zip I downloaded from the rooting guide, but I get that error about the file being the wrong size or something.
Click to expand...
Click to collapse
Did you rename the TAR file? - if you did try naming it back to the original name.
All firmware TAR files are fully compatible with Heimdall and Odin plus Heimdall One-Click..
Also I know one thing for sure, that when you press the "Browse" button it's looking for a TAR file.
The MD5 just tells the winzip or winrar if the checksum of the file is the same as it's sopposed to be.
Another thing, the Heimdall One-Click JAR file also wants the TAR file, none of these things work
with Zipfiles with the exception of Mobile Odin, but that has a problem now, it's not yet compatible
with any of the Galaxy S4 variants like the M919 , I9500 and all the others.
Misterjunky said:
Did you rename the TAR file? - if you did try naming it back to the original name.
Click to expand...
Click to collapse
Here's exactly what I've done so far, and I've re-downloaded everything so I have fresh files and filenames/extensions just to clear any mucking up I did:
I downloaded this file from this thread as I understand this is the stock firmware necessary to use here.
I unzipped the file, and used 7-zip to extract the tar.md5 which also extracted a .dll.
The tar.md5 file is named: M919UVUAMDL_M919TMBAMDL_M919UVUAMDL_HOME_.tar.md5
I have installed Heimdall version 1.3.1 as the download site claims that version 1.3.2 broke compatability with many devices.
I downloaded the two .jar files you linked to which make up the one-click.
If all of this is correct so far, I'm understanding that I need to now feed a tar.gz file to heimdall one-click, however, I don't have any files that end in .gz. Just the tar.md5, which the one-click does not accept.
The button on the one-click literally says, "Select a Heimdall tar.gz for one-click" - So I'm lost there.
I'm reading that the front-end GUI is what would be used to create a tar.gz, but it seems to require downloading the PIT file from your phone, and this is failing now, possible due to me having installed Kies and now having different kernel extensions that apparently need to be unloaded (no idea how to do that lol).
This is so complicated! Makes me want to go buy a cheap netbook lol
re: gz
caffeineighted said:
So I've got it all running, however, the one-click asks for a "tar.gz file" and I don't have one. I'm reading that the Heimdall front-end creates a tar.gz file, but since browsing to the .zip I originally downloaded leads to an error, I'm not sure how this is done.
Click to expand...
Click to collapse
Why not browse to the TAR file, you can also add the .gz to the filename.tar and see if it helps.
Misterjunky said:
Why not browse to the TAR file, you can also add the .gz to the filename.tar and see if it helps.
Click to expand...
Click to collapse
I've tried that too, and it just says, "error Could not write to temp folder" and then "Could not write to file"

[Q] Extract Boot.img from Stock ROM

Hi guys, I would like to extract boot.img from a Stock ROM without the need of installing it on my (Galaxy Note 2 T-mobile). All I found on the internet is how to extract it from an installed ROM.
So I would like to:
1. Extract the boot.img
2. Then flash it through ODIN to my custom ROM (Jedi Master 14)
Thanks in advance and please help me :crying:
Why would you do that?
Hastily spouted for your befuddlement
I don't know how you going to use boot.img to fix your problem. But the .md5 rom files are just zipped files. unzip and you will find the boot.img file. Are you sure that this will fix your problem?
Are you trying to change your boot image?
Use a tar archive program (7-Zip, Winzip, Winrar, PKZip, this format is pretty universal) to extract what you need from the official Samsung ROM images. (Check out sammobile.com if you haven't already, you will need to register.)
You might get some error message about the end of the archive, that's normal and due to the presence of the MD5 hash at the end of the file, which most programs will be able to work around nonetheless.
Repack the relevant file with a *nix tar binary, or under Cygwin on a Windows machine. (YMMV, but those are the two only ways I've managed to have the files work with Odin.)
Reboot phone to download mode and flash with Odin as usual.
Done.
Thanks a lot. Thats exactly what I am looking for.
Sent from my SGH-T889 using xda app-developers app
Darkshado said:
Use a tar archive program (7-Zip, Winzip, Winrar, PKZip, this format is pretty universal) to extract what you need from the official Samsung ROM images. (Check out sammobile.com if you haven't already, you will need to register.)
You might get some error message about the end of the archive, that's normal and due to the presence of the MD5 hash at the end of the file, which most programs will be able to work around nonetheless.
Repack the relevant file with a *nix tar binary, or under Cygwin on a Windows machine. (YMMV, but those are the two only ways I've managed to have the files work with Odin.)
Reboot phone to download mode and flash with Odin as usual.
Done.
Click to expand...
Click to collapse
and how do we do?
i flash the file without pepacking it so i can t bot, kernel error!
I'm really annoyed if you can explained to me how do we do it
thx

Odin do PDA file found

I've downloaded everything and can't figure out what I am missing.
I put my T Mobile Samsung s4 m919 device in download mode ...
I plug it in and start Odin in admin mode.
I uncheck auto reboot and see Com 4 in green
I click PDA and find no files for it.
lthaga said:
I've downloaded everything and can't figure out what I am missing.
I put my T Mobile Samsung s4 m919 device in download mode ...
I plug it in and start Odin in admin mode.
I uncheck auto reboot and see Com 4 in green
I click PDA and find no files for it.
Click to expand...
Click to collapse
If your download file still in .zip format?
If so you need to unzip it into it's usable *.TAR format.
Skipjacks said:
If your download file still in .zip format?
If so you need to unzip it into it's usable *.TAR format.
Click to expand...
Click to collapse
I tried twice, it did not successfully root. Can you give me the link to verify that I am using right link?

Is Anyone on OB3 on SGH-I747M(no I747)and are willing to create a debrick.img for me?

I need to debrick my s3 previously running on 4.4.2 OB3. is anyone running OB3 on s3 I747M (not the I747)?
I have the instructions ready. so first, root your phone. If you don't want to root your phone, good bye because I don't need you. Ill get to the next step once someone is willing to help.
I have the OB1 how you make a debrick? do you have a tutorial? i can help u
dragoonmx said:
I have the OB1 how you make a debrick? do you have a tutorial? i can help u
Click to expand...
Click to collapse
ok. so, first, install busybox from the playstore. then, download terminal emulater, as well.
MhikeiMPC12 said:
ok. so, first, install busybox from the playstore. then, download terminal emulater, as well.
Click to expand...
Click to collapse
Done, what's next...
go into terminal app, type the following:
"su"
It will ask you for root access. type Grant.
"busybox dd if=/dev/block/mmcblk0 of=/sdcard/backup.bin bs=1M count=70"
It will create a backup.bin in the root of /sdcard. ipload that file here. if the file type isnt supported, put it in a .zip then upload it using your pc. if you dont have a pc, just rename the end part of the file (.bin) to (.zip) and upload it here.
@dragoonmx
did he died?
Lets forget him. Do you have OB1?
MhikeiMPC12 said:
Lets forget him. Do you have OB1?
Click to expand...
Click to collapse
Hey, im in cm12.1, i need rom stock?
Thank goodness you are back! here is the link for stock:
http://dl.sammobile.com/PV9dRCQlOD0...1tcQExaUQ../I747MVLUFOB3_I747MOYAFOB3_RWC.zip
MhikeiMPC12 said:
Thank goodness you are back! here is the link for stock:
http://dl.sammobile.com/PV9dRCQlOD0...1tcQExaUQ../I747MVLUFOB3_I747MOYAFOB3_RWC.zip
Click to expand...
Click to collapse
could you link me a full tutorial for the debrick?
OK download Odin v3.07 search it in Google. then, open Odin, and extract all the files to the desktop.
Before continuing, make sure to backup all of your files because it will be deleted. The file you downloaded before, open it with winrar, then extract the files inside, to the desktop. Open Odin. Get your phone and turn it off. Once its off, hold vol down + home button + power button until you get the prompt to go to download mode. click vol up and it should say "Downloading...". Connect the phone to the computer, and Odin should recognise it. go to the AP slot, click it, and navigate to the file you extracted. Wait for Odin to recognise the file. After, click start, and don't disconnect it until it says "PASS" on the screen, or the phone boots up completely in the set-up. Its recommended that you eject the SD card in your phone (if you have one). Also, make sure only F reset time, and auto reboot are checked.
MhikeiMPC12 said:
OK download Odin v3.07 search it in Google. then, open Odin, and extract all the files to the desktop.
Before continuing, make sure to backup all of your files because it will be deleted. The file you downloaded before, open it with winrar, then extract the files inside, to the desktop. Open Odin. Get your phone and turn it off. Once its off, hold vol down + home button + power button until you get the prompt to go to download mode. click vol up and it should say "Downloading...". Connect the phone to the computer, and Odin should recognise it. go to the AP slot, click it, and navigate to the file you extracted. Wait for Odin to recognise the file. After, click start, and don't disconnect it until it says "PASS" on the screen, or the phone boots up completely in the set-up. Its recommended that you eject the SD card in your phone (if you have one). Also, make sure only F reset time, and auto reboot are checked.
Click to expand...
Click to collapse
Lol, for the debrick
Sorry bro I'm on 4.1.1 Stock and Rooted. Can't do OTAs.
dragoonmx said:
Lol, for the debrick
Click to expand...
Click to collapse
Just do what i told you to do earlier. read the other comments. the commands are over there
Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
@DocHoliday77 , any chance in hades this would work for atthtcm8 ? i know are completely different beasts , but figured couldnt hurt (too much.lol) to ask.
p.s. not bricked. just to have as 911-just-n-freakin-case.
"all i can really do is stay out of my own way and let the will of heaven be done"
DocHoliday77 said:
Hey man! Sorry I haven't been able to respond recently. Sent you a pm, but basically I've been in and out of town a lot the last few days!
Got a couple items that makes the process of creating a debrick.img very easy! Started out with a simple script and it evolved from there!
This one will create a 128mb debrick.img on your internal sdcard. (/sdcard/debrick.img)
Download this and flash in TWRP: https://www.androidfilehost.com/?fid=23196940996969297
That's It! Now just zip and upload!
(ignore the T999 in the filename
It will work on the I747 too)
This next one is slightly more difficult to use, but still easy if you just follow the instructions included in the zip file.
It includes options to create 128mb, 256mb and 512mb images. You should only need the 128mb one but we were using this for testing and troubleshooting when new firmwares were released.
Do NOT flash in recovery. Unzip and follow the included instructions. It will create the debrick.img and then will zip it for you using 7zip.
https://www.androidfilehost.com/?fid=23196940996969297
The first is the easiest and probably all you need. Just included the second in case anyone wants to try it or the first method doesn't produce a working image. (Doesn't fix a brick)
Hope it helps!
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
So, with this i can create de img, instead of using terminal, codes, etc ?
MhikeiMPC12 said:
I need to debrick my s3 running on 4.4.2 OB1. is anyone running OB1 on s3 I747M?
I have the instructions ready. so first, root your phone. If you don't want to root your phone, good bye because I don't need you. Ill get to the next step once someone is willing to help.
Click to expand...
Click to collapse
Hi, this is the debrick link for the OB1, i747M
https://mega.nz/#!M9ly3DZB!I58rC4SG33Y7k8SWfoKHYwQssasHmwxBPELYQ5bGvv4
dragoonmx said:
Hi, this is the debrick link for the OB1, i747M
https://mega.nz/#!M9ly3DZB!I58rC4SG33Y7k8SWfoKHYwQssasHmwxBPELYQ5bGvv4
Click to expand...
Click to collapse
Ok thanks so much!
Here goes nothing...

Marsh file for OS X and Heimdall

Totally lost. Try to download marshmallow tar and update. But I download, open heimdall and use browse for file. But it is not valid to open and put in cue. I don't know what to do. Is it a different file for Apple. Mac socks by the way. I have no other choice.
cherubashe said:
Totally lost. Try to download marshmallow tar and update. But I download, open heimdall and use browse for file. But it is not valid to open and put in cue. I don't know what to do. Is it a different file for Apple. Mac socks by the way. I have no other choice.
Click to expand...
Click to collapse
Try watching this: https://www.youtube.com/watch?v=R7u-iUo5C6M
If you need the latest TAR file, it is here: http://forum.xda-developers.com/spr...ide-links-files-update-root-restore-t3366862/
koop1955 said:
Try watching this: https://www.youtube.com/watch?v=R7u-iUo5C6M
If you need the latest TAR file, it is here: http://forum.xda-developers.com/spr...ide-links-files-update-root-restore-t3366862/
Click to expand...
Click to collapse
Have done already. Thank you.
koop1955 said:
Try watching this: https://www.youtube.com/watch?v=R7u-iUo5C6M
If you need the latest TAR file, it is here: http://forum.xda-developers.com/spr...ide-links-files-update-root-restore-t3366862/
Click to expand...
Click to collapse
Tried again. Just fails to load pit file. Doesn't recognize tar file. Can't even choose file. Tried jodin, can't download. Tried smart switch but apparently sprint doesn't allow that either
cherubashe said:
Tried again. Just fails to load pit file. Doesn't recognize tar file. Can't even choose file. Tried jodin, can't download. Tried smart switch but apparently sprint doesn't allow that either
Click to expand...
Click to collapse
You have to extract the tar file. What you actually flash is the file with an extension of .MD5.

Categories

Resources