Related
I've rooted before but this will be my first time using ROMs. I've already flashed to one ROM but curious to try others. Do I have to wipe and flash to another ROM, etc? Or is there a way to have multiple ROMs?
Try bootmanager it let's you boot multiple roms.
It says ICS is having issues with it :-(
Only one way to find out! It is the only one I know of dude.
You can always make a backup of your current rom ans restore it after trying another
Sent from my Galaxy Nexus using xda premium
Go into ROM Manager and make a nand backup of your Rom before flashing. Depending on which ROM you are moving to it is a good idea to then copy the rommanager/backup folder off to your PC before wiping then you can copy it back if needed.
I already have Calkulins E4GT 2 1.6 installed. If i wanted to try a different rom do i just install the new one and it should work?
Sent from my SPH-D710 using xda app-developers app
Its always advised to wipe the phone clean when going from one ROM to another, you can usually keep your data when upgrading the same ROM
willjr0k5 said:
I already have Calkulins E4GT 2 1.6 installed. If i wanted to try a different rom do i just install the new one and it should work?
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Wow, NO, don't 'just install a new one.'
There are some very good posts about how to properly switch ROMs - most of the ROMs OPs specify how they recommend you go about installing their particular ROM.
Some suggest going back to the EL26 Kernel, others the TWRP kernel and other the 'safe' kernels by Agat and Chris41G.
Choose your ROM. Read the developers recommendations AND read through the posts regarding that ROM. Failure to do so will leave you with poor performing phone or worse an expensive paperweight.
If you want to step up to the latest ICS stock try sfhub's one-clicks, since you are already on an ICS leak you could try the 'no-data' version and see if you can keep your data intact. Not always recommended but it's worth a try. Then use his Autoroot to add CWM with a safe recovery (Agat's).
Then use CWM to flash away - as long as you follow the developers advice.
Good luck.
Well, I tried Cyanogen, AOPK and now I tried PARANOID 2.0.
None of them works, GAPPS works, but I get the Status 7 error while installing a ROM, i'm using the SGH-T999V and none of them works.
How are you trying to install them?
Sent from my SGH-T999 using xda premium
You are rooted and trying to install with cwm or twrp recovery, right.
I ask because that error reminds me of stock recovery for some reason...
Sent from my SGH-T999 using xda app-developers app
Hey make sure you've rooted your phone first. I'm on cm10 with leankernel and everything works just great. Good luck!
Sent from my SGH-T999v using xda app-developers app
Sounds like stock recovery to me bud..
Sent from my T999 GS3 @ 2GHZ
d2tmo wrong device?
Status 7 errors can occur in ClockworkMod for everyone saying he's using a stock recovery.
Make sure your rooted and you should be good
Hey SGH-T999V,
I think we'd all love to help, but we need some more information. Can you tell us step by step exactly what you are doing? Once we have that, I think we will be able to help you past this.
I am fully rooted with clockworld recovery 5.0.4 or something, installing zip from sdcard then Status error 7 and yeah...
From what I've gathered, status 7 errors usually occur when the ROM is incompatible with the device e.g when flashing a CDMA rom on a GSM phone. My first advice would therefore be to confirm that the zip file is for the correct GS3 variant. You mentioned aokp and CM. Both these ROMS refer to the T999 as "d2tmo" and the zip files usually contain this in the name (e.g cm-9-20120909-NIGHTLY-d2tmo.zip). I would therefore check this first before anything else.
Assuming that's not the issue, some suggestions would be:
1. This is a longshot, but try toggling signature verification and see what happens. I doubt this is the issue but I have had update zips fail because this was accidentally toggled
2. Try updating CWM: http://forum.xda-developers.com/showthread.php?t=1766552
3. Try changing the recovery to TWRP and see if its the recovery. The easiest way I've found is to use the GooManager app. Install from the play store. Run the app. Hit the menu key and select Install OpenRecoveryScript. Reboot into the TWRP recovery and try flashing from there.
4. Try rerooting the device from scratch
I got this error when I rooted using the Sprint method. I had to reflash cwm using Rom manager before I could install Cyanogen
Sent from my SGH-T999 using xda premium
I had the same problem. I updated cwm and it fixes it. Your version is old....
Sent from my SGH-T999 using Tapatalk 2
Just updated CWM to 6.0.1.2 and tried to flash with TWRP... same Status 7 error with every single ****ing ROMs i'm trying to install.
Wiped everything many times before installing zip, nothing works... i'm giving up and downloading stock ROM until Samsung releases official JB 4.1.
You might have to go back to stock and root it again
Sent from my SGH-T999V using XDA Premium HD app
could try installing the roms with Odin
Could try downloading the roms using Rom manager pro and having it install them
You just got to get one to work and you'll be golden
Is it a setting problem in cwm?
Like toggling allow installation of unsigned packages
Sent from my SGH-T999 using xda premium
Just update cwm to a newer version. I promise that'll fix it.
Sent from my SGH-T999 using xda premium
Or pay someone to do it. Look for rooting services on craigslist
Sent from my SGH-T999 using xda premium
same here
Hi, there,
just looking for solution for the same problem and got this thread...
well, I was rooted and on cyanogen and everything worked fine.
had backups and stuff.
decided to return to stock just to have it updated and backed up and after that to return to cyanogen.
when in CWM, after stock, while re-root-ing, I did a fix permission which erased some of my system files in the backups, so all my backups on the phone became useless (lesson #1: always move your backups away from the phone).
decided to start from scratch, so using ODIN I flashed the proper stock ROM for T999V. Installed the CWM version 5. something, superuser etc.
made a backup this time and store it outside the phone
when I tried to flash the cyanogen 10.0 for m2tmo (which I've flashed before without trouble), I got the error message as our friend here.
I edited the updater-script file in order to erase the first lines and got it flashed...
the problem that I have right now is that I am stuck in the first screen when the cyanogen keeps going round and round and round.... and nothing happens
any suggestion from here?
http://wiki.rootzwiki.com/ClockworkMod_Recovery#Status_7
The status 7 error can be from a bad download, bad signature, and I have seen it from using an old version of clockwork. I would first make sure you are running the most current version of recovery. if that doesn't solve your problem try redownloading the Rom.
Hi all, ive had my Tmobile samsung galaxy s2 for awhile now, and i finally decided to root it (and did it successfully) a few days ago (yay)
Ive done a bit of research for what I can do while rooted, basically after CPU setting, save battery life when idle... Simple things
But ive been meaning to try flashing a ROM. But I want to make sure i know absolutely everything needed to know to flash one. I had a samsung tmobile sidekick that I was able to root and flash Gingerclone on, but I remember it had alot of little details while installing that simply missing one could seriously screw up your phone
So first off, if anyone has had the sidekick: Is flashing/ installing roms as complex on the sgh-t989 as it is on sidekick 4g?
And secondly... After rooting my galaxy, i no longer have the stock android recovery (obviously)...... Instead it is replaced with CWM-based recovery (i think 5.0.2.2?). Is there a difference between this and Clockworkmod recovert (which should show an orange screen)?
I wanted to use ROM manager but opted not to when it told me that I "needed clockworkmod recovery installed" to work.
A little help, please?
Thanks!
heyitsmeyo2 said:
Hi all, ive had my Tmobile samsung galaxy s2 for awhile now, and i finally decided to root it (and did it successfully) a few days ago (yay)
Ive done a bit of research for what I can do while rooted, basically after CPU setting, save battery life when idle... Simple things
But ive been meaning to try flashing a ROM. But I want to make sure i know absolutely everything needed to know to flash one. I had a samsung tmobile sidekick that I was able to root and flash Gingerclone on, but I remember it had alot of little details while installing that simply missing one could seriously screw up your phone
So first off, if anyone has had the sidekick: Is flashing/ installing roms as complex on the sgh-t989 as it is on sidekick 4g?
And secondly... After rooting my galaxy, i no longer have the stock android recovery (obviously)...... Instead it is replaced with CWM-based recovery (i think 5.0.2.2?). Is there a difference between this and Clockworkmod recovert (which should show an orange screen)?
I wanted to use ROM manager but opted not to when it told me that I "needed clockworkmod recovery installed" to work.
A little help, please?
Thanks!
Click to expand...
Click to collapse
There the same
Sent from my HTC PH39100 using xda app-developers app
XxSHaDoWxSLaYeRxX said:
There the same
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Okay, great! Glad it was so simple lol.
Now about my other question... Let me explain. When I would install a custom ROM on my sidekick, i remember having to do all sorts of things like unmount system/ unmount SD card before installing and remount them after (i dont remember the exact methods... Dont quote me on that).
I know the general procedure of basically Wiping data, Wiping cache, Wiping delvik cache... But does the galaxy s2 require checking of all of that unmounting/mounting?
heyitsmeyo2 said:
Okay, great! Glad it was so simple lol.
Now about my other question... Let me explain. When I would install a custom ROM on my sidekick, i remember having to do all sorts of things like unmount system/ unmount SD card before installing and remount them after (i dont remember the exact methods... Dont quote me on that).
I know the general procedure of basically Wiping data, Wiping cache, Wiping delvik cache... But does the galaxy s2 require checking of all of that unmounting/mounting?
Click to expand...
Click to collapse
Flashed many roms, and no need for all that. Just make sure you wait the 10 minutes after flashing a rom.
FlaShing roms on this phone is so simple "that even a caveman can do it". I would also advise to ditch clockwork recovery and install twrp, also never use rom manager to flash roms. Just follow the op's instructions on what steps to follow to flash the rom successfully. Also no need to mount and unmount anything. Good luck.
Awesome! Thank you all for your replies, glad to here that flashing is much simpler on this phone
I really wouldnt recommend anyone rooting a sidekick as a beginner. It was my phone, i soft bricked ot my first time. Ugh, it was such a hassle! And it left me a little traumatized to try anything on this. lol!
Thanks for all the help!
Here are the genreric steps to follow to flash a rom (and yes, TWRP is recommended instead of CWM):
- place the rom zip on the internal storage
- place a copy of the radio zip that you have on the internat storage (for safety reasons)
- copy Google Apps zip if it is not included in the rom (most roms do not have these included, but the dev might provide a tuned version)
- reboot phone and enter the recovery menu (hold vol up + vol down pressed while booting)
# In recovery mode
- wipe data
- wipe system
-(Use Darkside Super wipe if still on cwm 5.0.2.7 or below)
- flash rom
- flash gapps (if missing from the rom)
- wipe cache/ dalvik cache.
- reboot and wait 10 mins
- reboot and wait 1 minute
- enjoy
If you are planning on flashing a Rom on your phone of course twrp recommended and you should definitely try Jedi mind trick x2 for the t989 Hercules. It is the most stable Rom on the Samsung galaxy s2 T989 T-Mobile. The instructions above are the best instructions you should follow. And read it carefully or you will brick your device. If using twrp follow the twrp method. And if using cwm make sure you use the extra cwm steps. It is super important you follow them unless you want a fancy paper weight.
Sent from my SGH-T989 using xda premium
I just flashed my phone last night to the Liquid smooth rc 9. This was my first root and flash. I used titanium backup for the apps, used ROM manager to flash to the latest cwm. Here is a link I used
http://forum.xda-developers.com/showthread.php?t=1926754
Great instructions! Good luck!
Sent from my SGH-T989 using xda app-developers app
TomThom said:
I just flashed my phone last night to the Liquid smooth rc 9. This was my first root and flash. I used titanium backup for the apps, used ROM manager to flash to the latest cwm. Here is a link I used
http://forum.xda-developers.com/showthread.php?t=1926754
Great instructions! Good luck!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
You have it all wrong. Use twrp and use app 2 zip
Sent from my SGH-T989 using xda premium
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
What version of CWM are you using? Number, please.
Do you currently have a ROM on the phone? If you go into About phone from the system settings, what phone model does it say you have?
Its says I have SGH-T999
Sent from my SGH-T999 using xda app-developers app
Are you updating CWM with ROM Manager?
Factory reset, wipe cache, and you should be able to install any ROM without any issues.
Sent from my SGH-T999 using xda app-developers app
Yes I updated my CWM using Rom Manager
Sent from my SGH-T999 using xda app-developers app
I've had this happen many many times. Check the MD5. Its more than likely a bad download. Try re downloading it again.
Try transferring the download from PC to your phone. And try to flash again.
Sent from my SGH-T999 running Chihuahua v1 ROM
re: error 7 issues
CooLoL1999 said:
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
Click to expand...
Click to collapse
Most likely you tried to flash some rom which was not 100% compatible with your phone.
If you can get into CWM or TWRP recovery just do a factory reset/wipe cache/wipe dalvik cache.
Do NOT wipe or format SYSTEM . This should allow your phone to boot completly.
Be sure NOT to try flashing the same rom which gave you the error 7.
If you are still having problems then continue reading...
If you have a cwm/twrp backup (nandroid) of your previous rom go back into cwm or twrp
and restore your nandroid backup.
If you don't have a nandroid backup but you do have a proper zip file custom rom saved to your sdcard
then you can flash the rom making sure you first do a factory reset/wipe cache/dalvik and system.
After that you can start over again but be sure to make a nandroid backup first.
If you still have problems after doing the above you will need to ODIN flash the stock-rooted
Samsung Galaxy S3 T999 Jellybean v4.1.1 firmware.
P.S. You would NEVER get an ERROR 7 if you would only flash stock based "Samsung Galaxy S3 T999 Jellybean v4.1.1 custom roms"
instead of those CM/AOKP/AOSP or Ported roms.
Good Luck!
CooLoL1999 said:
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
Click to expand...
Click to collapse
First of all, make sure that you redownload the ROM, check that the MD5's match, and that you are indeed on the latest CWM recovery.
Secondly, I've heard of these status 7 errors, even when on the latest CWM recovery. There's times when installing certain ROMs where these errors occur, which usually happens when the ROM’s updater script file checks to see if the phone model of your phone is compatible with the ROM you are installing and this portion of the script are called “asserts”. with this it prevents you from accidentally flashing a ROM intended for a different model.
Normally you can fix the issue by installing TWRP recovery but there's another possible solution for this if the TWRP method doesn't solve it but take some serious precaution. You need to be very careful and do this at your own risk.
Follow this step by step guide
http://highonandroid.com/android-roms/how-to-fix-status-7-error-with-cwm-recovery-on-rooted-android/
Following this will remove the asserts thus removing protection upon flashing the wrong ROM. Do if you choose to follow this make absolutely sure that the ROM you're flashing is for the T999.
Sent from my SGH-T999 using xda premium
---------- Post added at 01:57 AM ---------- Previous post was at 01:40 AM ----------
Status 7 errors can very well still occur through CWM recovery on stock based ROMs.. It mostly all depends on the ROMs updater script and if the dev accidentally made an error within that, which is why the asserts would normally correct that error by forcing the ROM to be flashed regardless.
Sent from my SGH-T999 using xda premium
Everyone, Thanks for helping me out, I flash back to stock firmware, I found out that I rooted my phone the wrong way (Qbking's Video). I tried rerooting but I used a different method and updated CWM, now works completely fine, Thanks for all your help!! :thumbup::thumbup:
Sent from my SGH-T999 using xda app-developers app