Related
I have the setting checked to keep screen on while on AC, but it still auto dims to about 10% after 30 seconds or so. I want to stop it from doing this and just keep the screen at 90% all the time. Auto-brightness is already off, and that didn't change anything.
I'm trying to setup a tasker profile to turn the brightness to 90% during the day when in the car. Everything works fine, I can see the screen get brighter, BUT it still dims after 30 seconds and I can't see the display when it's bright out unless I touch the screen, then it comes back to full brightness again.
Help please?
settings - display - screen timeout - never turn off
bigmoogle said:
settings - display - screen timeout - never turn off
Click to expand...
Click to collapse
I don't have that option. Only goes to 30 min. I'm running CM6.
bigmoogle said:
settings - display - screen timeout - never turn off
Click to expand...
Click to collapse
But the screen still dims to about 10% (even with Sense and even while plugged in).
Maxy6 said:
But the screen still dims to about 10% (even with Sense and even while plugged in).
Click to expand...
Click to collapse
Exactly.
I've temporarily resolved this by having tasker open car home, then opening pandora.
When car home is running, it won't dim the screen.
Now I have to figure out how to make it do this without car home open.
bump
Did anyone ever find a solution?
Settings > Applications > Development > Stay Awake (Screen will never sleep while charging)
This is true but the screen still dims.
Still searching for an answer.
I had the same problem. After some searching I found this over on android forums and it's working like a champ for me. Hope this helps! (I don't think there's any system setting that will change this, unfortunately)
Download the app "Setting Profiles Lite". Lite is free and only lets you create 1 rule at a time, but multiple profiles (Actions you want it to do when the rule is happening)
1. Create a profile that simply changes the screen time out to "Screen Never Times out" Save it as whatever name you want.
2. Create a rule. Under conditions add a condition for Battery that when "plugged into any charger", hit OK. Now add an action to Activate Profile, and choose the profile you made above.
Bam! When plugged into the charger, the screen timeout goes to never, and the screen stays bright, unplug it and time out goes back to whatever you had it set at!
I have been using this for about 10 min now so I'm a rookie but it seems to be working! Make sure if you screw around in it that you don't accidentally disable the rule (I did that because I tried to make another and the Lite won't let you make 2 rules, and it disabled the first one. Just had to long press to enable it again)
spalding1028 said:
I had the same problem. After some searching I found this over on android forums and it's working like a champ for me. Hope this helps! (I don't think there's any system setting that will change this, unfortunately)
Download the app "Setting Profiles Lite". Lite is free and only lets you create 1 rule at a time, but multiple profiles (Actions you want it to do when the rule is happening)
1. Create a profile that simply changes the screen time out to "Screen Never Times out" Save it as whatever name you want.
2. Create a rule. Under conditions add a condition for Battery that when "plugged into any charger", hit OK. Now add an action to Activate Profile, and choose the profile you made above.
Bam! When plugged into the charger, the screen timeout goes to never, and the screen stays bright, unplug it and time out goes back to whatever you had it set at!
I have been using this for about 10 min now so I'm a rookie but it seems to be working! Make sure if you screw around in it that you don't accidentally disable the rule (I did that because I tried to make another and the Lite won't let you make 2 rules, and it disabled the first one. Just had to long press to enable it again)
Click to expand...
Click to collapse
Nice find Going to try it now....
SOLVED
spalding1028 said:
I had the same problem. After some searching I found this over on android forums and it's working like a champ for me. Hope this helps! (I don't think there's any system setting that will change this, unfortunately)
Download the app "Setting Profiles Lite". Lite is free and only lets you create 1 rule at a time, but multiple profiles (Actions you want it to do when the rule is happening)
1. Create a profile that simply changes the screen time out to "Screen Never Times out" Save it as whatever name you want.
2. Create a rule. Under conditions add a condition for Battery that when "plugged into any charger", hit OK. Now add an action to Activate Profile, and choose the profile you made above.
Bam! When plugged into the charger, the screen timeout goes to never, and the screen stays bright, unplug it and time out goes back to whatever you had it set at!
I have been using this for about 10 min now so I'm a rookie but it seems to be working! Make sure if you screw around in it that you don't accidentally disable the rule (I did that because I tried to make another and the Lite won't let you make 2 rules, and it disabled the first one. Just had to long press to enable it again)
Click to expand...
Click to collapse
Works great! Thank you for coming up with a fix!
spalding1028 said:
I had the same problem. After some searching I found this over on android forums and it's working like a champ for me. Hope this helps! (I don't think there's any system setting that will change this, unfortunately)
Download the app "Setting Profiles Lite". Lite is free and only lets you create 1 rule at a time, but multiple profiles (Actions you want it to do when the rule is happening)
1. Create a profile that simply changes the screen time out to "Screen Never Times out" Save it as whatever name you want.
2. Create a rule. Under conditions add a condition for Battery that when "plugged into any charger", hit OK. Now add an action to Activate Profile, and choose the profile you made above.
Bam! When plugged into the charger, the screen timeout goes to never, and the screen stays bright, unplug it and time out goes back to whatever you had it set at!
I have been using this for about 10 min now so I'm a rookie but it seems to be working! Make sure if you screw around in it that you don't accidentally disable the rule (I did that because I tried to make another and the Lite won't let you make 2 rules, and it disabled the first one. Just had to long press to enable it again)
Click to expand...
Click to collapse
THANK YOU!
From time to time I've searched for a solution to this annoying problem, but came up dry. For months I've been using the built-in Power Control widget to manually toggle between Auto-bright when on battery, and Full-bright when on the charger, but NEVER AGAIN
I mean, if your phone's on the charger, why wouldn't you want to take advantage of the plentiful juice pouring out of the charger to power the screen? (Maybe, and I don't know if this is true, but maybe the battery will charge slightly slower with the display sucking a bit more of the available 0.5 max amps over USB.)
IMO, this problem is really worthy of being solved by a standalone app, apart from the more general Settings Profile Lite (but now that it's solved... I don't feel the urge to code it anymore.)
ChargeBright app
FWIW, I did finally end up writing my own app to solve this problem. Check out the ChargeBright app @ market.android.com if interested.
Settings Profile Lite was overkill since I only needed to tweak one setting: display brightness when charging. ChargeBright saves resources and is better tailored to the specific task in any case.
spalding1028 said:
I had the same problem. After some searching I found this over on android forums and it's working like a champ for me. Hope this helps! (I don't think there's any system setting that will change this, unfortunately)
Download the app "Setting Profiles Lite". Lite is free and only lets you create 1 rule at a time, but multiple profiles (Actions you want it to do when the rule is happening)
1. Create a profile that simply changes the screen time out to "Screen Never Times out" Save it as whatever name you want.
2. Create a rule. Under conditions add a condition for Battery that when "plugged into any charger", hit OK. Now add an action to Activate Profile, and choose the profile you made above.
Bam! When plugged into the charger, the screen timeout goes to never, and the screen stays bright, unplug it and time out goes back to whatever you had it set at!
I have been using this for about 10 min now so I'm a rookie but it seems to be working! Make sure if you screw around in it that you don't accidentally disable the rule (I did that because I tried to make another and the Lite won't let you make 2 rules, and it disabled the first one. Just had to long press to enable it again)
Click to expand...
Click to collapse
Worked like a charm! Thanks!
spalding1028 said:
I had the same problem. After some searching I found this over on android forums and it's working like a champ for me. Hope this helps! (I don't think there's any system setting that will change this, unfortunately)
Download the app "Setting Profiles Lite". Lite is free and only lets you create 1 rule at a time, but multiple profiles (Actions you want it to do when the rule is happening)
1. Create a profile that simply changes the screen time out to "Screen Never Times out" Save it as whatever name you want.
2. Create a rule. Under conditions add a condition for Battery that when "plugged into any charger", hit OK. Now add an action to Activate Profile, and choose the profile you made above.
Bam! When plugged into the charger, the screen timeout goes to never, and the screen stays bright, unplug it and time out goes back to whatever you had it set at!
I have been using this for about 10 min now so I'm a rookie but it seems to be working! Make sure if you screw around in it that you don't accidentally disable the rule (I did that because I tried to make another and the Lite won't let you make 2 rules, and it disabled the first one. Just had to long press to enable it again)
Click to expand...
Click to collapse
2 years later and this still works like a charm. THANKS.
I installed this ROM. Looks great! But... I cant turn the Internet connection off! I want to turn it off especially for night, but if I go to Comm Manager and turn it off, few seconds later (especially when return to HOME screen) it connects again.
I have all updates set as manual, so no idea why...???
Help! Thanks
jannen said:
I installed this ROM. Looks great! But... I cant turn the Internet connection off! I want to turn it off especially for night, but if I go to Comm Manager and turn it off, few seconds later (especially when return to HOME screen) it connects again.
I have all updates set as manual, so no idea why...???
Help! Thanks
Click to expand...
Click to collapse
there is a setting for timeout for disconnect.
Hello all. I just decided to retire my Vibrant yesterday and got an S3. I haven't changed much on it. I'll run it stock for quite a while. I am using a custom launcher, etc.
My battery life is horrible though! It's not even noon and I'm already down to 35%. I've made sure S Voice is not set to wake up when I talk to it. My weather was set to update every 15 minutes by default, but I've changed it to every hour. I charged it in the van on the way to take kiddos to school, and it was at 80ish percent. So that's quite a drop in not a long time. Granted, it's new, so I'm playing with it.
What tips can you give me to get the best battery life I can out of it? Besides custom ROMs. I'm not even rooted. Yet.
Well how long has your screen been on? That will be the determining factor in your battery life. Like you said, it is new and you are playing with it so I am willing to bet that probably has something to do with it.
Otherwise, turn data off when you aren't using it and keep the screen brightness as low as possible.
Here's what I do with a freshly flashed rom. I pretty much drill down through every setting turning off what I dont need.
WiFi - turn off network notification.
More Settings - Everything off
Sound - turn off everything below "System"
Display - Auto brightness off. Timeout 1min. Smart Stay off. Touch key always on or off. Auto Adj Screen Tone off. Battery% on.
Power Saving - Off.
Accounts and Sync - Off
Location Svcs - Off
Language and Input - Voice Cmd off. Voice Recognizer (all off for google and Samsung). Voice Search all off. TTS driving mode off.
Backup and Reset - can't remember what its listed under but below carrier data press to open and uncheck collect data (this is carrier iq, so I removed it asap once rooted)
Accessory - all off
Developer Options - set animation scales to 0.5x.
Hope that helps. I keep a lot off and only turn stuff on when I need it. There's some pretty cool features but for me it doesn't hurt my experiance with the phone to not use a lot of them.
Sent from my SGH-T999 using xda app-developers app
joshnichols189 said:
Well how long has your screen been on? That will be the determining factor in your battery life. Like you said, it is new and you are playing with it so I am willing to bet that probably has something to do with it.
Otherwise, turn data off when you aren't using it and keep the screen brightness as low as possible.
Click to expand...
Click to collapse
Ah. My screen was set to stay on for 10 minutes. That, I would imagine, was a large part of my problem. At least according to my battery stats. Why do they set that as default??
My screen brightness is now set to low. What is this with the data? Doesn't that mean I would not receive email, google talk messages, etc?
DocHoliday77 said:
Here's what I do with a freshly flashed rom. I pretty much drill down through every setting turning off what I dont need.
WiFi - turn off network notification.
More Settings - Everything off
Sound - turn off everything below "System"
Display - Auto brightness off. Timeout 1min. Smart Stay off. Touch key always on or off. Auto Adj Screen Tone off. Battery% on.
Power Saving - Off.
Accounts and Sync - Off
Location Svcs - Off
Language and Input - Voice Cmd off. Voice Recognizer (all off for google and Samsung). Voice Search all off. TTS driving mode off.
Backup and Reset - can't remember what its listed under but below carrier data press to open and uncheck collect data (this is carrier iq, so I removed it asap once rooted)
Accessory - all off
Developer Options - set animation scales to 0.5x.
Click to expand...
Click to collapse
I just did almost all of these. With the WiFi detection off, will I need to manually find my home network each time I get back home?
Also, if I turn Voice Command off, I won't be able to push the button and say "Listen to blah blah blah" or "Navigate to ....." correct?
The_MamaBee said:
Ah. My screen was set to stay on for 10 minutes. That, I would imagine, was a large part of my problem. At least according to my battery stats. Why do they set that as default??
My screen brightness is now set to low. What is this with the data? Doesn't that mean I would not receive email, google talk messages, etc?
I just did almost all of these. With the WiFi detection off, will I need to manually find my home network each time I get back home?
Also, if I turn Voice Command off, I won't be able to push the button and say "Listen to blah blah blah" or "Navigate to ....." correct?
Click to expand...
Click to collapse
I am on CM10 so I am not sure where it is for stock Touchwiz, but I would assume you could go to settings > display > screen timeout and change it there.
Yes, turning off data would mean no push email or Google Talk messages. You could download an app that turns off your data when you turn the screen off, then on when you turn the screen on and your emails and messages would come through then.
joshnichols189 said:
I am on CM10 so I am not sure where it is for stock Touchwiz, but I would assume you could go to settings > display > screen timeout and change it there.
Yes, turning off data would mean no push email or Google Talk messages. You could download an app that turns off your data when you turn the screen off, then on when you turn the screen on and your emails and messages would come through then.
Click to expand...
Click to collapse
Aah. Okay. Thank you! Yes, I fixed the screen timeout.
The_MamaBee said:
I just did almost all of these. With the WiFi detection off, will I need to manually find my home network each time I get back home?
Also, if I turn Voice Command off, I won't be able to push the button and say "Listen to blah blah blah" or "Navigate to ....." correct?
Click to expand...
Click to collapse
I should have also mentioned I turn off wifi and data when I don't need it to, which is rare but it happens at times!
By turning off the wifi notification, the only change is it won't give you a notification in status bar that there's an open network nearby that you could connect to. Itll still auto connect to any network you've already got configured.
For voice cmd, it won't let svoice open apps for you. But for example in navigation you can still hit the mic button on keyboard and speak your destination.
Sent from my SGH-T999 using xda app-developers app
Can you upload a Screenshot of your battery screen... It will make it a lot easier to look at
Sent from my SGH-T999 using xda premium
On the Wifi issue. What I do with regards to wifi, is if I know that I am not going to be near an open connection, I turn it off. When I am at work, there is no wifi nearby that I can connect to. So I use Mobile Data instead. Why you ask? It is because when you have your wifi on, in the back ground it is always scanning for a signal. Turn that off and no scan, then no drain for something that you are not using at moment.
I know that this is a bit deeper than you wanted to go, but in the Build.Prop you can put a setting [wifi.supplicant_scan_interval=] and you can set that out. The time in there is the time duration on scanning intervals based on seconds. So the setting wifi.supplicant_scan_interval=180 means that it scans for wifi and doesn't find one, then counts off 180seconds and scans again.<--This is what I have mine set too, btw.
Disable the wifi when your not using it.
Hi everyone,
So I have mounted my tablet in the centre console of my car flush, the last bit is getting tasker to react in the correct way.
The problem I'm getting is that split second when you turn the key from 'on' to turning it over it looses power. This plays around with the profiles I have set up...
Has anyone made a task that will stop it from turning on and off and back on again when the car starts up or make it load smoother?
Thanks Chad
RossiFozzi said:
Hi everyone,
So I have mounted my tablet in the centre console of my car flush, the last bit is getting tasker to react in the correct way.
The problem I'm getting is that split second when you turn the key from 'on' to turning it over it looses power. This plays around with the profiles I have set up...
Has anyone made a task that will stop it from turning on and off and back on again when the car starts up or make it load smoother?
Thanks Chad
Click to expand...
Click to collapse
I don't know your exact situation or what your tasker proffile setup is, but couldn't you simply add in a wait for x seconds step in one of your profiles?
My set up is like this:
Profile - State - Power (Any)
Task:
Blue tooth on
Wifi on
Car home ultra open
Pop message
Profile 2: State - Power (invert)
Task:
Pop message
Blue tooth off
Wifi off
Kill Car home ultra
Screen lock
That's what I'm using at the moment but that split second just messes with it.. Makes it all muddled up as in a short time it's turning on, off and on again.
Would that time task you suggested bypass it recognising that it's losing power?
RossiFozzi said:
My set up is like this:
Profile - State - Power (Any)
Task:
Blue tooth on
Wifi on
Car home ultra open
Pop message
Profile 2: State - Power (invert)
Task:
Pop message
Blue tooth off
Wifi off
Kill Car home ultra
Screen lock
That's what I'm using at the moment but that split second just messes with it.. Makes it all muddled up as in a short time it's turning on, off and on again.
Would that time task you suggested bypass it recognising that it's losing power?
Click to expand...
Click to collapse
By no means am I a pro with Tasker, but you could probably put in a wait command at the beginning of the 1st profile and it may stay alive when the car loses it's power for that short time.
I'll give that a go and see if it works.
Will let you know of the outcome
Thank you!
It didn't work unfortunately..
Any other ideas, links, answers to help me out on this?
I would really appreciate it!
Chad.
Sent from my HTC_PN071 using xda app-developers app
Press and hold the Profile and select the properties and set the cool down timer to a value so that the profile can't attempt to run again so soon, but that might have unfavorable results too. So, since the power on sensor is causing this, you might consider splitting the task into multiple Profiles where the Power on only turns on the Bluetooth, with some other Profiles configured using net Bluetooth connected and Bluetooth invert doing the rest maybe?
Sent from my Nexus 7 using Tapatalk
Hi, at Christmas I received this wonderful SmartWatch.
When accesnione, I would not be wrong, I think I saw a screen asking how long the s were to go into standby after a certain period of inactivity. If I'm right I put 15 minutes.
The question is, does anyone know how to change or disable this stand? Since it is really uncomfortable then the clock off the screen. The clock is beautiful especially with the screen saver.
Obviously this feature is not to be confused with "always on screen" which is different [this is already active].
Thank you
Ouch,I can't follow your grammar sir. You might get some translation help,and cut and paste again........^^^^^^^^
the SmartWatch goes into standby after 15 minutes and turns off the screen. How can I disable this feature?
packo72 said:
Hi, at Christmas I received this wonderful SmartWatch.
When accesnione, I would not be wrong, I think I saw a screen asking how long the s were to go into standby after a certain period of inactivity. If I'm right I put 15 minutes.
The question is, does anyone know how to change or disable this stand? Since it is really uncomfortable then the clock off the screen. The clock is beautiful especially with the screen saver.
Obviously this feature is not to be confused with "always on screen" which is different [this is already active].
Thank you
Click to expand...
Click to collapse
You may have gotten a watch face that had always on set off, and it never toggled.
Try to turn always on OFF, then after awhile turn it back ON and see if you get the ambient face to show again.
rusty.gh said:
You may have gotten a watch face that had always on set off, and it never toggled.
Try to turn always on OFF, then after awhile turn it back ON and see if you get the ambient face to show again.
Click to expand...
Click to collapse
it does with any watchfaces
When I take the watch off to shower,usually 10 to 15 min,I come back out and it's all black. I tap the screen,and it comes back on in ambient mode. I think this is what your referring to. I believe this is a sort of sleep mode to save battery, due to the watch receiving no movement at all. It's a cool feature. If this is happening while still on your wrist,then there might be a problem.???
Hanger4life said:
When I take the watch off to shower,usually 10 to 15 min,I come back out and it's all black. I tap the screen,and it comes back on in ambient mode. I think this is what your referring to. I believe this is a sort of sleep mode to save battery, due to the watch receiving no movement at all. It's a cool feature. If this is happening while still on your wrist,then there might be a problem.???
Click to expand...
Click to collapse
Oh!! I know what it is....let me check but there is a setting for when the watch is off your arm to go to sleep. If you don't want that we have to set it off.... I found it, it's called "screen lock" you want to turn screen lock off..
Not it. Screen lock is when you have to draw a pattern on the watch face to unlock it,like on most phones now a days.
Hanger4life said:
When I take the watch off to shower,usually 10 to 15 min,I come back out and it's all black. I tap the screen,and it comes back on in ambient mode. I think this is what your referring to. I believe this is a sort of sleep mode to save battery, due to the watch receiving no movement at all. It's a cool feature. If this is happening while still on your wrist,then there might be a problem.???[/QUOTE
]exactly when it is not the wrist,you can turn off?
Click to expand...
Click to collapse
I found this on that topic, it says 30 minutes though. Maybe there is a time adjustment in the wear app? If not as you mentioned when you first synced up you picked 15, may have to forget and re-sync to chose again?
Tip: Letting your screen turn off when you're not using the watch will help improve battery life. If the watch hasn't moved for 30 minutes, the screen will turn off even if you have it set to remain always on. To wake your watch, tilt it or press the power button.
rusty.gh said:
I found this on that topic, it says 30 minutes though. Maybe there is a time adjustment in the wear app? If not as you mentioned when you first synced up you picked 15, may have to forget and re-sync to chose again?
Tip: Letting your screen turn off when you're not using the watch will help improve battery life. If the watch hasn't moved for 30 minutes, the screen will turn off even if you have it set to remain always on. To wake your watch, tilt it or press the power button.
Click to expand...
Click to collapse
perfect, I just wanted to change the time from 15 to 30 minutes. it's possible?
I'm thinking you would have to disconnect, and forget, then connect like a new watch to get that setting.
rusty.gh said:
I'm thinking you would have to disconnect, and forget, then connect like a new watch to get that setting.
Click to expand...
Click to collapse
but this setting I have not made by the Smartphone but SmartWatch
packo72 said:
but this setting I have not made by the Smartphone but SmartWatch
Click to expand...
Click to collapse
Yes, and we cannot find such setting. Meaning it's a one time pop up when you originally connect watch.
This is just a theory though, I do not remember mine asking this question, and I cannot find a setting for this on the watch. According to the watch notes it should be set at 30 minutes default, maybe before you try anything actually time it?
rusty.gh said:
Yes, and we cannot find such setting. Meaning it's a one time pop up when you originally connect watch.
This is just a theory though, I do not remember mine asking this question, and I cannot find a setting for this on the watch. According to the watch notes it should be set at 30 minutes default, maybe before you try anything actually time it?
Click to expand...
Click to collapse
I did restore Huawei, removed from the SmartWatch Android Wear. I restarted everything but this function has not resumed as the first time.
packo72 said:
I did restore Huawei, removed from the SmartWatch Android Wear. I restarted everything but this function has not resumed as the first time.
Click to expand...
Click to collapse
okay, now take the watch off, and time how long it takes to screen off, default should set it to 30 minutes.
rusty.gh said:
okay, now take the watch off, and time how long it takes to screen off, default should set it to 30 minutes.
Click to expand...
Click to collapse
Yes, now after recovery goes into standby after 30 minutes and not 15
Thanks