Develop Bugs

[Q] USB connection not working

Hi,
All of a sudden my gio decided not to support USB anymore.
When I connect it, no mass storage thing appears on the phone, and in windows (windows 8 and 7) there are no signs of any device being connected either.
Even ODIN doesn't find it when it's in download mode, although I do have the drivers from sammobile installed.
Except for this the phone is operating normal, and it still charches propperly (which goes through USB too ).
Any ideas? I don't really need the USB connectivity right now, but in case I want to flash back to a stock rom I do need ODIN to work.
Thanks in advance,
Stannieman

Have you covered the basics yet (try another cable, try on another pc etc). Seems to me like a faulty cable or faulty usb port, either on phone side, either on pc side.

coccolino_dbro said:
Have you covered the basics yet (try another cable, try on another pc etc). Seems to me like a faulty cable or faulty usb port, either on phone side, either on pc side.
Click to expand...
Click to collapse
My external hdd works with the same cable on the same pc and same usb port. I have tried all ports. Mass storage also doesn't work on a macbook pro, though I don't know for sure if it is supported on OS X but I suppose it should work. Different cable doesn't work either.
It's not the cable and not the pc.
So I think in the luckiest case it's the connector in the phone?
Friday I'll open it, there's some annoying piece of dust on my screen also so I can take that out too + check for the connector.

In this case, yes, you may be right about the phone's port; remember, even if it's somehow flawed, it could still charge - maybe only the data pins are the problem. Hopefully, it will be only some dust blocking the connection, and not something worse...
Good luck!

If the connector is detached from the board then it's also doable (very careful of course), otherwise it won't ever work anymore.
I can't take it to the shop you see, I can't flash a stock rom...

Try trough cwm--->mount & storage -----> mount usb

Frankin96 said:
Try trough cwm--->mount & storage -----> mount usb
Click to expand...
Click to collapse
Thanks, but doesn't work.
I've had problems with charging one day, but after an hour of trying (unplugging and replugging) the cable it started charging again. Never had charge problems after that.
Actually, I don't know if data ever worked after that. Now I think about it I never tried data connection since then.
Usually when I flash a new custom rom I always flash the latest stock to have latest baseband and other things that aren't changed by the custom rom install (I like having the newest ). That's the only thing I use usb for (and photo's but not anymore with cm9 without preview).
I think it's the usb connector from the phone.

stannieman go to the shop where you bought it and ask if they can look at it

I returned home yesterday and tried connecting to the desktop. Guess what?... it worked.
I don't understand why, as the hardware of my notebook didn't change and it always worked. I tried windows 8 rp and windows 7 (windows 7 used to work for sure), but nothing on my notebook. On the desktop it works just fine with windows 8 cp.
So I think we can conclude that either it's my notebook + macbooks don't work together with android, or that our desktop has magical powers.

Hello !!
The same thing is happening to me .... the phone can charge battery but is detected as faulty "unrecognized device" but was working before.. the cable work with my second phone .. I found no method to flash it throw another way..

SiNeDeNiS said:
Hello !!
The same thing is happening to me .... the phone can charge battery but is detected as faulty "unrecognized device" but was working before.. the cable work with my second phone .. I found no method to flash it throw another way..
Click to expand...
Click to collapse
Having the exact same problem, would love some help with that. This only happens with a specific PC.

Delete drivers and install them again
Sent from my GT-S5660 using xda premium

voetbalremco said:
Delete drivers and install them again
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Do you mean Uninstall them trough control panel? That I already tried and it didn't help. I also tried to remove the device from the device manager, that didn't word also.
Any other ideas?
Thanks for the help.

Go to device management
Uninstall samsung drivers and also usb drivers
Reboot
Usb will be installed automatically
Install gio drivers yourself ( sammobile.com ), dont use kies
Sent from my GT-S5660 using xda premium

I have this problem right now BUT..... PC detects it and I can use the USB only kies doesn't detect my phone, I don't know why. I'm currently using CM 7.2 by phiexz.
Sent From My Galaxy Gio Using XDA Premium

kies doesnt work with cm roms only stock

voetbalremco said:
Go to device management
Uninstall samsung drivers and also usb drivers
Reboot
Usb will be installed automatically
Install gio drivers yourself ( sammobile.com ), dont use kies
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
The drivers from sammobile did the work!
Thanks! you're the man.

RaideN250 said:
I have this problem right now BUT..... PC detects it and I can use the USB only kies doesn't detect my phone, I don't know why. I'm currently using CM 7.2 by phiexz.
Sent From My Galaxy Gio Using XDA Premium
Click to expand...
Click to collapse
cuz you don't run samsung firmware

yuvalrozin said:
The drivers from sammobile did the work!
Thanks! you're the man.
Click to expand...
Click to collapse
Can you please share the drivers that you mentioned previously, i'm having the same problem with my Galaxy Gio and can't find the drivers on sammobile.com, it would be great if you uploaded them.
Thanks

PC won't recognise GT-N7100 when connected.

I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!

NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
try enabling/disabling usb debugging or developer options altogether if it is still not fixed then
try reflashing stock rom. maybe some modification you did and don't remember.

UtkarshGupta said:
... maybe some modification you did and don't remember.
Click to expand...
Click to collapse
That's what I'm thinking too. I might have to do a factory reset rather than re-flash though - it's a viscious circle - the PC won't recognise the device so I can re-flash ROM
I was trying to avoid this course of action though :crying:
Does anyone else have other suggestions before I do this?
(BTW, I did try enabling/disabling debugging already)

OK, so I eventually got too frustrated and did a full factory reset ... my PC (or KIES) still won't see the Note 2?
Anyone....????

Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet

UtkarshGupta said:
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
Thanks for your quick reply!
How do I do that?

NotSellingHats said:
Thanks for your quick reply!
How do I do that?
Click to expand...
Click to collapse
Could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in on xda thread. But you will probably need to do it every boot myte help tempry :fingers-crossed:

UtkarshGupta said:
Get a different kernel.
Sent From Samsung's Galaxy Note II Using Internet
Click to expand...
Click to collapse
I should probably be a bit more specific about this question... I would love to get a new kernel (and ROM, and even just root the device) but I no PC will recognise that the GN2 is connected - so Odin or anything won't run.
Any suggestions?

123hiten said:
Could be solved by changing UART mode to USB mode through code *#7284#. UART ... choose MODEM and USB choose PDA. I have found this in on xda thread. But you will probably need to do it every boot myte help tempry :fingers-crossed:
Click to expand...
Click to collapse
Thanks for this suggestion but it didn't seem to work either - UART was MODEM and USB was PDA already but I toggled them etc to try to force reset.
Ideas?

Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Sent from my GT-N7100 using xda app-developers app

NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
I read that you wrote regarding kies.... "I have installed and uninstalled Kies twice."
Just do one thing , download fresh kies .exe file from official samsung site & try to instal it again on your pc !!:good:

UtkarshGupta said:
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Sounds terrific - I will get Mobile Odin and give it a try.
I have one question though... my GN2 is not rooted, can I use Mobile Odin?

ketani73 said:
I read that you wrote regarding kies.... "I have installed and uninstalled Kies twice."
Just do one thing , download fresh kies .exe file from official samsung site & try to instal it again on your pc !!:good:
Click to expand...
Click to collapse
I'll give it another try. Can't hurt... maybe you know something I don't know...

NotSellingHats said:
I have read lots of threads in this forum but no solutions seem to fix my problem.
I have the GT-N7100. Unlocked, not rooted & standard factory ROM.
When I connect it to my PC (Win7-64) via USB, it is not recognised at all. It charges, but the PC won`t recognise it.
I have installed and uninstalled Kies twice.
I have installed and uninstalled the device drivers twice.
I have tried different USB cables, different USB ports and different PCs - same issue every time.
Please help!
Click to expand...
Click to collapse
Hi Mate,
This seems to me to be a driver issue. Check device manager, you might have a yellow bang there, uninstall and reinstall the driver from there.
Do get back if you need further instructions.
Cheers, Sumit

ya m8 ,y the kernel change,u said its stock so it mus b recognizd by ur pc..even wen u uninstall kies ,its better to restart an install it again..i facd this with my s2 an i removd kies fully an installd it the the main issue is the usb drivers u got to see the usb ports too were u connect cause i face prblm wen using the same port for s1,s2,gs note2 ...i use it in diff ports specially for flashing ,odin stuff...

Still no joy
Hi
I have still had not luck with device drivers, etc.
I have obtained Mobile Odin Pro, by I would like to clarify, the app clearly states that the device must be rooted to run. My device is not rooted - how can I root it? ( I have tried ExynosAbuse but it doesn't work). or can I do this with Mobile Odin?
Thanks for your help.

Theres a software called mobilego. Try installing it cand connect your phone. If it identifies your phone u can atleast take a back up. I had the same problem with a S2 i was using couple of months back. Never got it connected thru kies.
http://www.wondershare.com/android-manager/

UtkarshGupta said:
Download redpill via forums and flash iy via recovery.
If you don't have recovery get the img file from here and rename the img file to recovery.Img and flash it via mobile odin.
You don't need a pc to do stuff.
Everything can be done from phone itself.
Remember to use the latest version.
Click to expand...
Click to collapse
I'm sorry for such a newb question, but could you please provide more details about how to do this. :fingers-crossed:

NotSellingHats said:
I'm sorry for such a newb question, but could you please provide more details about how to do this. :fingers-crossed:
Click to expand...
Click to collapse
Omg I just told the whole procedure. Please specify what you want understand.
this is XXXDDDAAA

I am missing something here?
If one don't have root and unable to connect to PC how mobile odin will work?
It needs root, and somewhere I read exynose abuse not worked. So there is no chance.
@OP
Try cleaning usb socket in device. Remove battery and clean usb socket very carefully, i have seen few cases where charging can be oossible but still unable to get connect to PC due to faulty socket. Otherwise go to service centre and ask them to check for same.
Sent from my GT-N7100 using xda premium

[Q] [Help!] Bricked Phone with driver problem

Hello everyone...
I was updating the phone recently, and went to reboot it (cyanogen mod ROM btw) and now I have no idea what it did but it is now stuck on the Samsung logo, and their is no recovery I can use on it. Only DL mode works.
I tried to use Odin to relfash but the problem is on both my Windows 7 and Windows 8 computers, they install the drivers, but they still fail to recognize the phone when I plug it in!
I have tried different USB ports, a full driver uninstall, multiple USB cords and the computer refuses to recognize the phone saying "USB Device not recognized"
Again, the drivers install fine, and I did a reboot after each install and uninstall. No luck.

I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?

"BootLooping GhostBrick"
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
nagoshi said:
I didnt even install drivers on my W8 netbook and I was able to flash back TWRP using Odin and Download mode yesterday when my attempt at flashing TWRP 2.6.0.4 originally failed.
Fire up download mode, then open up Odin (you should see a COM port open), load up what you need to install, then flash.
What are you trying to flash using ODIN? A bootloader or a ROM?
Click to expand...
Click to collapse
...true, I second that. I'm doing this as we speak.

No Go Mi Amigo... PC still No read
vdorvilus said:
Holy crap! you too? I'm experiencing the same thing too bro. its my girlfriend's phone tho. she's borrowing my Nexus 4 while I work on fixing her SGS2...I seem to have contracted a serious case of the BootLooping GhostBrick, just like you did, right after updating. I went through the same steps troubleshooting as you did, and ...its a guess, but I'm starting to figure the solution will probably include: 1. using ADB to push sum files to the phone, or otherwise somehow reflashing stock firmware from the PC.
2. Re-Root the dam thing and flash a kernel with a recovery (like CWM or TWRP) using rom manager...and 3. Considering installing a ROM of my choice Like PACMAN, or Cyanogenmod.....hmm...Yum
anyway, the search for the vaccine to this dreadful affliction begins. Please post if you find something, I will too.
---------- Post added at 10:21 AM ---------- Previous post was at 10:13 AM ----------
...true, I second that. I'm doing this as we speak.
Click to expand...
Click to collapse
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too

vdorvilus said:
.....well, so much for that attempt.... still cant get either the PC or Odin to Read....I just flashed CWM recovery using ODIN minutes ago with no problems, but now its borked too
Click to expand...
Click to collapse
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from techerrata.com/browse/twrp2/hercules then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Same issue
soupysoup said:
Reinstall Odin and the drivers for t989, then go get twrp 2.6.0.4 from then open Odin and put the phone in DL mode, now when odin connects make sure u open the recovery in PDA format and touch nothing else in Odin, flash twrp and ur good, this version is capable of dealing with 4.3 too with no issues at all
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?

VermontKindBud said:
Re-installing Odin and drivers still didn't get Odin to recognize the device in download mode. Windows 7 isn't assigning it any COM port, and nothing can be flashed unless Odin sees the com port the device is on. I used Goo Manager to flash TWRP 2.6.0.3 over my previous 2.6.0.0 version and now I'm stuck on samsung logo, can't reboot to recovery and PC won't recognize device in download mode. Anyone know a solution?
Click to expand...
Click to collapse
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from techerrata.com/browse/twrp2/hercules its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Yup
soupysoup said:
Welcome to ur first soft brick, and as I said in ur other post u need to disable or removes Samsung kies before trying to use Odin as long as any part of kies is running even in background Odin won't see the device, also make sure u use factory/data approved USB wires, also try diff ports, sometimes Odin won't see com3 but will see com5, be patient and follow this and ull be fine, also twrp2.6.0.3 has been known to cause sftbricks, DL 2.6.0.4 from its the newest and 4.3 compatible
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?

VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
Yes u need to make sure kies isn't running or installed on ur PC, if it is Odin won't see it
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Unrecognized by PC
VermontKindBud said:
Yeah, I wish I'd known that. Goo Manager automatically selected it as the latest recovery. I just can't get past the device not showing up as a com port issue at all. Is there any known way to make windows recognize it?
Click to expand...
Click to collapse
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?

VermontKindBud said:
It's not a matter of trying different com ports, I can't get the PC or Odin to recognize the phone in download mode despite uninstalling kies, installing the latest drivers twice, 3 different OEM cables, multiple usb ports, nothing. when I plug it in, Windows doesn't make any sound like with other usb devices, nor does it try and search for drivers. Are there any other options short of JTAG repair?
Click to expand...
Click to collapse
I was going to reply earlier, but I got side tracked and this guy is literally having the exact same problem as me. I tried multiple OEM cables, and ports and Windows recognized it but it still won't let me USE it. Odin (after re-install) still shows no connections or ports.
Also, yeah this phone isn't mine either, my Dads. He is using my old S3 for now and is quite mad with me hahaha.
So yeah, I have to re-cap...
-Updated through Goomanager.... (the culprit I am guessing)
-Rebooted
-Got stuck on the Galaxy S 2 screen
-Plugged in with 4 USB cables to three different USB ports
-Uninstalled and reinstalled Odin numerous times, each with a reboot between.
-Odin fails to recognize it
-Windows KNOWS IT IS THERE, and makes a sound when plugged in, however it says "USB Device not recognized"
Any more ideas?
Thanks for the help to guys it is very much appreciated. I will donate to the person that can help me out of this

Here is a screen shot of Windows with the phone in DL mode

LGIQEXPO said:
Here is a screen shot of Windows with the phone in DL mode
Click to expand...
Click to collapse
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

soupysoup said:
Do u have Samsung kies installed on the PC? If u do your going to need to remove all traces of it in order for Odin to see the phone, also search Samsung t989 USB drivers and install the specific driver for Hercules, if u can get the phone into DL mode its fixavke so don't stress to much, I use Odin v1.85, download twrp2.6.0.4 from this site techerrata.com/browse/twrp2/herculesif Odin still fails to recognize the device try diff PC, factory/data approved USB wire, an make sure kies is nowhere and it should work, pm me if u need more help I'll do what I can, but like I said as long as DL mode is accessible its only a soft brick...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time

LGIQEXPO said:
Kies is no where in sight. I will try yet another PC as well as searching for Hercules specific drivers (any link?) When I get home. Thank you in the mean time
Click to expand...
Click to collapse
Just Google Samsung t989 Hercules USB drivers, download and install, it should work, like I said as long as DL mode is accessible it should be an easy fix...
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app

Omg....

I am experiencing the same problem. Did anyone find the solution?

Probably a faulty USB port. My computer shows that message all the time, only one of them works correctly. If not, you just need to install the correct USB Drivers, because even if you don't have them it should recognize your phone as a Samsung phone but will say that the drivers did not install correctly.

windows cant recognized my S4

Please, please any help!!! the last days my laptop dont recognized my S4.... I try in a different computer but its the same....I dont know if do this after install the rom called Hyperdrive RSL14... because when I install this rom show something wrong in the installation, but I continue and use it... but I dont shure if the computer dont recognized after that......
I try in different slots of usb on my laptop.. I try in another laptop ... show the same screen :
"One of the usb devices atached to this computer has malfunctioned, and Windows does not recognized"
i try send my phone in Odin mode , but its the same !!!... I try to do on my cell restoring to an old nandroid backup but its the same....so only have in my sdcard two roms to install : wiked 10 and hyperdrive RSL14... but I want my pc recognized my cell... please helpme on this !!!

Try this
see the 3rd post may help u
http://windowssecrets.com/forums/showthread.php/144842-Mysterious-USB-Device-messages:cool:

You need to have the latest Samsung drivers installed onto your pc, download Keis
Sent from my SGH-M919 using xda app-developers app

slogger001 said:
see the 3rd post may help u
http://windowssecrets.com/forums/showthread.php/144842-Mysterious-USB-Device-messages:cool:
Click to expand...
Click to collapse
I did ut..but its the same...download kies but not... my 3 pcs cant recognized my S4... if its my S4 with somsghing wrong ?
Sent from my SGH-M919 using xda app-developers app

reinstall
boni7010 said:
I did ut..but its the same...download kies but not... my 3 pcs cant recognized my S4... if its my S4 with somsghing wrong ?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
reinstall the windows

slogger001 said:
reinstall the windows
Click to expand...
Click to collapse
its NOT my pc.... its not the cable... I have 3 laptops....windows 7 and one with windows 8 with the latest drivers intalled... other phones its works with them..,. just only my S4, so I have 3 usb cables ones OEM and 2 more generic... the 3 usb cables works with other cell in the pcs...
what its wrong with my S4.... if conect to my pc the phone its charging, but just only charging.. not recognized to other modes... I want to know what can I do, because its important fix it, to work with ODIN and not pull out the ExtSDCard every time to want to past any file between my cell and my pc...
something its wrong with the port on my cell... did you think I need replace the port or something like that ????:crying:

do u have kies
boni7010 said:
its NOT my pc.... its not the cable... I have 3 laptops....windows 7 and one with windows 8 with the latest drivers intalled... other phones its works with them..,. just only my S4, so I have 3 usb cables ones OEM and 2 more generic... the 3 usb cables works with other cell in the pcs...
what its wrong with my S4.... if conect to my pc the phone its charging, but just only charging.. not recognized to other modes... I want to know what can I do, because its important fix it, to work with ODIN and not pull out the ExtSDCard every time to want to past any file between my cell and my pc...
something its wrong with the port on my cell... did you think I need replace the port or something like that ????:crying:
Click to expand...
Click to collapse
which version of Samsung kies ur using

Have you tried removing the drivers from device manager and reinstalling them?
Sent from my SGH-M919 using XDA Premium 4 mobile app

windows recognize problems
I went through that for about a week. and my solution was as simple as using another usb cable. it sounds simple but try it. make sure its made for your phone. some pprograms will run with other cables and some wont.

GT-i9192 Not responding with Odin ...

Hi Guys
I need install custom Rom for my device GT-i9192 by odin .. But Not responding
Even open files are not responding
Knowing that I tried other devices and worked without problems
Just my device.
When connect it to my computer. Not responding
Please reply ,,,
Please help me ...

azoga said:
Hi Guys
I need install custom Rom for my device GT-i9192 by odin .. But Not responding
Even open files are not responding
Knowing that I tried other devices and worked without problems
Just my device.
When connect it to my computer. Not responding
Please reply ,,,
Please help me ...
Click to expand...
Click to collapse
probably a usb driver issue, download latest and reinstall
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows

IronRoo said:
probably a usb driver issue, download latest and reinstall
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Click to expand...
Click to collapse
My brother tried another device... No problems connecting with PC ..
I think the problem is on my device GT-I9192 ..

azoga said:
My brother tried another device... No problems connecting with PC ..
I think the problem is on my device GT-I9192 ..
Click to expand...
Click to collapse
possible could still be driver.
However there are lots of things it could be, I can't remember them all soul here are random things I recall, no particular order! People have reported using different usb cable, or usb port (your phone may be more sensitive than your bothers) have helped. And/or try older ver of Odin (2.8 or 2.9 I think it was). Make sure to turn off Kies & your fire wall. Only connect phone once in download mode. Turn off debugging. Update uninstall Kies (might need to reinstall drivers if they come with Kies)
(try Heimdall if you can use linux)
Also, what recovery are you using? TWRP from neozone thread? ver?