Anyone comin from the Epic 4g Touch should know what this is. For those who don't, its a full stock tar with root loaded in an executable one-click package. This will not add to the custom flash count.
LJ7 Jellybean
There are two versions of Jellybean LJ7. One will wipe all data including internal SD. Performing a factory reset in recovery is recommended prior to use unless you're flashing the version that wipes data. If you are coming from a ICS touchwiz based rom and flashing Jellybean, the factory reset is probably not needed. Just wipe cache/dalvik if there are any issues.
Flash Count Reset Edition
These are unrooted and will NOT wipe data. These will reset your custom flash count before rebooting into the system.Each storage capacity will have its own one click. Be sure to pick the one that corresponds to your phone's storage capacity. YOU WILL BRICK YOUR PHONE IF YOU PICK INCORRECTLY. Wiping data prior to flashing is recommended.
LEN/LI3 ICS
There are two ICS versions as well. LI3 and the original LEN. Neither of these will wipe data. Doing a factory reset is a must if you are downgrading from jellybean.
Note that the stock recovery will wipe your internal storage too. This is why I recommend wiping beforehand so you can use cwm/twrp and preserve your internal sd.
DOWNLOAD FOR SPRINT
These are packed in self-extracting archives so extract before use.
You'll need a pc running windows with Samsung drivers installed
DOWNLOAD FOR C SPIRE
(MA5 BUILD NOW AVAILABLE)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks to garwynn for explaining the process to me and asking me to do this. Glad to finally see this expand to another phone
Hope I covered everything,
Enjoy!
First! For iSaint!
Thanks! This should help alot of new GS3 users or those returning to stock. Great work
Sent from my SPH-L710 using xda premium
Sick!!!!
Sweet...this is awesome!
I've seen these one-click packages save more than a few E4GT phones and they are how I got my start with rooting so I'm thrilled to see someone putting them together for the SGIII!
Thanks!
Cool link to my heimdall collection for osx linux
Heimdall is so much better its sad
! Very very nice!
Esoteric68 said:
I've seen these one-click packages save more than a few E4GT phones and they are how I got my start with rooting so I'm thrilled to see someone putting them together for the SGIII!
Thanks!
Click to expand...
Click to collapse
Ditto for sure. sfhub was my gateway drug.
Thank you so much! Your setup fixed my otherwise bricked GS3 (black screen blue LED)!
Can the no data wipe version be flashed over a current stock non-rooted LJ7 build? This is how the old sfhub ones worked. Just double checking before I go through with it.
mmark27 said:
Can the no data wipe version be flashed over a current stock non-rooted LJ7 build? This is how the old sfhub ones worked. Just double checking before I go through with it.
Click to expand...
Click to collapse
Yes it can.
These are exactly the same as sfhub's btw. I just changed the way they looked for a cleaner looking setup
Does this root 4.1.1 right
Sent from my SPH-L710 using xda premium
It is stock 4.1.1 with root so yes.
Coming from the E4GT, this is great to see. I flashed my first leak using these one-clicks and they're great to have just in case something goes wrong...
YES! THANK YOU! When I first got the S3, one clicks were the first things I looked for. And now we have them! They saved my E4GT, now I'm hoping they will do the same here when the help is needed.
Sent from my SPH-L710 using xda app-developers app
TYVM for this, its like using an E4GT again
btw any chance to mirror the link ? been downloading from goo.im but for the 3rd time it stopped at 90ish %
Just another post to send to those who brick their phone, thanks again billard! Maker of the GSIII "Easy Button".
Bonkurei said:
TYVM for this, its like using an E4GT again
btw any chance to mirror the link ? been downloading from goo.im but for the 3rd time it stopped at 90ish %
Click to expand...
Click to collapse
got everything slowly but surely being added to androidfilehost
After using the data wipe version I can only roam. I tried flashing two different TouchWiz Roms, Cyanogen Mod, the latest modem, updated my prl, and updated my profile. I am still roaming. Do you know what could've caused this?
ChaseBroyles said:
After using the data wipe version I can only roam. I tried flashing two different TouchWiz Roms, Cyanogen Mod, the latest modem, updated my prl, and updated my profile. I am still roaming. Do you know what could've caused this?
Click to expand...
Click to collapse
Pretty sure its coincidental. Try doing a ##72786# reset in the dialer.
Related
I was requested by MANY people to make this thread, as I did with EK02 and EL13. So I figured I would. Just videos on everything having to do with the latest LEAKED build EL26.
How to install Stock EL26:
http://www.youtube.com/watch?v=4gqMqZpBc7E
Review of Stock EL26:
http://www.youtube.com/watch?v=uqdBFSxxGWs
How to install the EL26 modem:
http://www.youtube.com/watch?v=0uGAamjtNwk
Modem Speed Test: EL13 vs EL26 on the Samsung Epic 4G Touch:
http://www.youtube.com/watch?v=lC4bwKx51CY
Be sure to subscribe to me
Nice thanks! I'll interested to see if others also see an improvement in 3G download speeds on the EL26 modem.
Dchibro said:
Nice thanks! I'll interested to see if others also see an improvement in 3G download speeds on the EL26 modem.
Click to expand...
Click to collapse
I'm getting 3MB down with EL26. I got around 1 MB down with el02 so I thinks its way better
Sent from my SPH-D710 using xda premium
Great video! Love all of your videos, very nice to look at and straight to the point!
Are there any changes to the 4G radio/enhancements to 4G aside from the enhancements to the 3G radio in EL26?
so can i use any rom or do I have to be stock to use this modem?
BigRitz said:
so can i use any rom or do I have to be stock to use this modem?
Click to expand...
Click to collapse
Yep, I just flashed it using Calk's 2.5.1 ROM using Odin
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Thanks man for everything you do, you're a true asset to the XDA community.
mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
yes, im having the same issue...
btw, thanks again for this vid!!!
---------- Post added at 02:30 PM ---------- Previous post was at 02:28 PM ----------
mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
Alright...I just rebooted my phone, updated profile and prl and everything went well...hope this helps!
OP updated
How to install Stock EL26:
http://www.youtube.com/watch?v=4gqMqZpBc7E
Review of Stock EL26:
http://www.youtube.com/watch?v=uqdBFSxxGWs
definately an improvement over the EL13, service in my area is poor at best so I needed this modem for sure.
BigRitz said:
so can i use any rom or do I have to be stock to use this modem?
Click to expand...
Click to collapse
I just flashed the modem alone in CWM, no problems, phone booted up fine.
phatmanxxl said:
I just flashed the modem alone in CWM, no problems, phone booted up fine.
Click to expand...
Click to collapse
how though thought it had be odin
trusted links to modem only tarball ?
BigRitz said:
how though thought it had be odin
Click to expand...
Click to collapse
Calkulin has flashable zips in the development section. Go him!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashable zip also posted by qbking77
http://forum.xda-developers.com/showthread.php?t=1352310
Sent from my E4GT
BigRitz said:
how though thought it had be odin
Click to expand...
Click to collapse
Yeah, see post above for flashable zip
[ODIN][TAR] SPH-D710.EL26_CL839620 (EL26 Modem/Kernel/ROM - Full Restore - Rooted)
This package is now available. Included are:
Full restore for EL26 Modem, Kernel, ROM (rooted) - 2 versions, one which resets your User Data. The other preserves your User Data. This will NOT trigger yellow triangle NOR will it increase ODIN flash count. It does NOT suffer from the issue with USB jig functionality being hampered/disabled.
Individual tar.md5 files for EL26 Modem, Kernel, ROM, and Rooted ROM. This is useful for Mac/Linux Heimdall users.
mrbaker823 said:
I can't update my Profile or PRL. It returns "Error: No Service Error"
Is anyone else having these problems?
Click to expand...
Click to collapse
I've never been able to update prl or profile (going back to several phones now) and really don't bother much with it.
Prl is easy to do with software (which I have and know how to do once you have the prl file). As for profile, quick call to C.S to provision account if I need to, otherwise once I have the MSL, I manually program.
Sent from my SPH-D710
I'm wary to flash this. My setup with Blazer ROM on EL13 is giving me great battery life and much better radio performance than my NS4G this replaced.
Think I'll wait a few days for more anecdotal evidence.
Sent from my SPH-D710
so i have been reading and reading and reading and mutha efin reading for about a good 2 weeks now and i got the flashing of the roms down and themes they seem pretty easy, but i am still very confused as to which roms are compatible with my phone the way it sits right now. i do not want to go to froyo i love my GB. so here is a pic of my phone settings. if someone could point me in the right direction i really wanna try this theme. if i cant then just what rom to use would be awesome. and also if you could maybe tell me what factors are involved in choosing a rom that would be like teaching me how to fish. thank you in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you check in Development all the roms are "compatible" with your phone in some way. Understand the difference between BML and MTD and what that means to you and your flashing choices and how to return to stock if needed and the dangers of making a mistake. I am currently using CM7 but have tried CM9 and Clean GB. Those are all MTD and have their own sets of benefits and concerns. Reading in each of them will spell them out but at that point it is simply a matter of trying them out and seeing which you like best.
To use that theme you will need to be on a deodexed ROM. I would recommend the full version of Sleeper or CleanGB 1.12 BML version. I would recommned reading up on MTD before considering changing your partition table and file system:
CleanGB go to second set of links labeled BML version:
http://forum.xda-developers.com/showthread.php?t=1483903
Or Sleeper, the second set of links on this page:
http://forum.xda-developers.com/showpost.php?p=22289108&postcount=287
Assuming you are rooted with CWM 5.027 already. If not Google qbking77's videos on how to root Samsung Epic on EL30. And also look for the included link to a video on how to install CWM 5.0.2.7.
As for how to choose a ROM the firmware versions are listed in the thread titles and usually all the features are listed in the OP or first few posts in the Development thread.
so just so im reading everything right i should have bml right? and clean gb has a version for bml i could just use that instead of go to mtd right? and thank you all for the help. love learning this stuff.
sephirothkadaj said:
so just so im reading everything right i should have bml right? and clean gb has a version for bml i could just use that instead of go to mtd right? and thank you all for the help. love learning this stuff.
Click to expand...
Click to collapse
Exactly. CleanGB had a BML version and Sleeper automatically detects what partition you are on and installs accordingly. When you are ready for MTD CleanGB MTD version will convert you.
Sent from my SPH-D700 using xda premium
Marcusant made a written root guide in the dev. Section explaing it very very well if u have horrible internet speeds to watch youtube vids... on my phone so can't post the link but its there for just bout evrything
Sent from my SPH-D700 using XDA
Sep, when u are looking at the different roms in the development section, it will say bml/mtd , things of that nature. Or I will only say bml or mtd. On ur phone, excactly in the screen that u posted, it will say mtd in the build number, or such other wise.
Sent from my SPH-D700 using xda premium
ok so i installed clean gb and then i flashed the bloody survival theme and now i have no 3g cant update profile or prl and before install i wiped dalvik cache and cache 3 times. did i mess something up? o yeah and due to me being noobish i forgot to backup before the theme flash.
sephirothkadaj said:
ok so i installed clean gb and then i flashed the bloody survival theme and now i have no 3g cant update profile or prl and before install i wiped dalvik cache and cache 3 times. did i mess something up? o yeah and due to me being noobish i forgot to backup before the theme flash.
Click to expand...
Click to collapse
It is unusual for a theme to do that. You can reflash the ROM to wipe the theme and check then. It is possible a tower is down near you or undergoing maintenance.
kennyglass123 said:
It is unusual for a theme to do that. You can reflash the ROM to wipe the theme and check then. It is possible a tower is down near you or undergoing maintenance.
Click to expand...
Click to collapse
just got done doing that and still no 3g at all i did make a backup before i flashed the rom and i restored it and still no 3g. i had 3g when i flashed the rom and when i flashed the theme 3g went away. do i need to reflash the radio?
well nvm i just reflashed the EL30 modem and all is well XD thank you .
sephirothkadaj said:
just got done doing that and still no 3g at all i did make a backup before i flashed the rom and i restored it and still no 3g. i had 3g when i flashed the rom and when i flashed the theme 3g went away. do i need to reflash the radio?
well nvm i just reflashed the EL30 modem and all is well XD thank you .
Click to expand...
Click to collapse
Aha...the old corrupted modem trick! 2nd time I fell for that this week...LOL,
DO NOT FLASH THIS IF YOU HAVE UPDATED TO MK3 (4.3)!!!! IT WILL CAUSE A HARD BRICK!!!
If you are not sure what this means, boot to download mode. If it says "Knox warranty void" or 'Warranty bit" as pictured below then leave this page. This will not work for you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'll try to keep this simple.
So here it goes, short but sweet...
You know it, you love it. Single recovery flashed file restore to UNROOTED STOCK with STOCK KERNEL, STOCK RECOVERY, MODEM, and Normal System Status with a Flash Counter at 0. Basically a replacement for the odin tar method for a quick on-the-go restore. This is the go-to file for a last minute trip to the sprint store or for unbricking without the need for a pc or ODIN. This will do what odin does with the addition of resetting the flash count during flash. To keep a custom recovery flash one from below after rom flash before rebooting into the system. To keep root access flash this after install BEFORE rebooting into system.
As with just about any rom you'll find posted on these forums, FLASH AT YOUR OWN RISK as I am not responsible for anything you do to your phone. Special thanks to @deviant.one, @Maddhadder90 and most recently @decimalman for the assistance in making the flash count reset possible for the 32gb Model.
** These zips contain full firmware flashing. Checking the MD5 is highly recommended
FOR THE SPRINT S3 (SPH-L710) ONLY!
INTERESTED IN SEEING THIS ON ANOTHER CARRIER/DEVICE? CLICK HERE! AND LET ME KNOW.
################16gb-ONLY###########################16gb-ONLY#################16gb-ONLY##########16gb-ONLY###########
NEW MD4 WITH COUNT RESET 16gb ONLY
MD4 MD5- 4a1d2bcd0f3ea0e5b41fb4d91fb7802b
__________________________________________________________________________
OLD MB1 Stock With Count Reset 16gb ONLY
MB1 MD5- 61175cc8043c3e2a274ca55aae4d57aa
####################16gb-ONLY###############16gb-ONLY########16gb-ONLY######################################################
#######32gb-ONLY#########32gb-ONLY##############32gb-ONLY######32gb-ONLY#####################################32gb-ONLY#######
NEW MD4 WITH COUNT RESET 32gb ONLY
MD4 MD5- 4e0d0b2c8121aaa059384cd8c520d7ac
_______________________________________________________________________________
OLD MB1 Stock with count reset 32gb ONLY
MD5- 671bc316e4344262a8a24d267ac80466
#######################32gb-ONLY####################32gb-ONLY###############32gb-ONLY############32gb-ONLY#######################
Flash one of these to keep a custom recovery
Flash to keep root
STILL CONFUSED?
THANKS TO @wwjoshdew for the awesome vid and crazy-fast mirrors!
Sweet!!!!!!!!!
Rooted Evo dead
Rooted Evo shift dead
Rooted Galaxy s3 alive and well!
joshtycobb said:
Sweet!!!!!!!!!
Rooted Evo dead
Rooted Evo shift dead
Rooted Galaxy s3 alive and well!
Click to expand...
Click to collapse
how the hell did your evo phones die? It makes me scared
This is great to have. Thanks.
Sent from my Nexus 7 using xda premium
This is awesome. I have been looking for something like this for a long time. This is a valuable contribution to the SGS3 community, and will save a great deal of time and hassle.
Good work, thanks billard.
Sent from my SPH-L710 using xda premium
Very much appreciated! Thank You!!!
Thanks much,
Always handy to have!
jjjjayd13,
Nice!!!
Thank You
This is great I have been looking for something like this for awhile propz
Sent from my SPH-L710 using Tapatalk 2
Beautiful! Finally someone that makes an unrooted version for back to stock. Saves a lot of time. Thanks a bunch man!
krewblink said:
how the hell did your evo phones die? It makes me scared
Click to expand...
Click to collapse
Well a long story there was a hammer and acid all I can say haha jk just use of figurative speech!!!
Rooted Evo dead
Rooted Evo shift dead
Rooted Galaxy s3 alive and well!
Thanks!
This is excellent! Thanks for putting the work into this. Any chance the mods would sticky this for easy access later?
has anyone tried it yet?
If we used this along with the root flash and TWRP can we flash back to our previous rom without issue?
Do you have to have a custom recovery to flash this? Or can it be applied through the stock recovery?
I am currently running blazer rom but have stock recovery.
i am 100% stock, can I run this through normal recovery? I have been waiting for the OTA but havent received it yet.
I don't think this can be flashed with stock recovery. Must have custom recovery to flash
Sent from Galaxy SIII
musclehead84 said:
I don't think this can be flashed with stock recovery. Must have custom recovery to flash
Sent from Galaxy SIII
Click to expand...
Click to collapse
How would I get the custom recovery back? Can I flash CWM rom Rom Manager?
Use Rom Manager to get recovery back...
That's what I did, worked like a charm...
Sent from my SPH-L710 using Tapatalk 2
raineyland said:
That's what I did, worked like a charm...
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
So you had a custom rom and stock recovery and used rom manager to get CWM back?
OK, I have notifications and music playing through external speaker as normal, but when I try to use speakerphone it goes silent. The earpiece works fine in calls, but speakerphone does nothing. I am rooted and this problem persists across all of my backups (carbon 4.2/pac 4.2/Mokee 4.4/stock ics 4.0.4/Slimbean 7 4.2) the only audio mod I have used was Viper4android and Sony Walkman, and after every restored backup no speakerphone, I have also tried flashing new roms (Cm9) just to test and it still persists. I am running FK19 and the prl is 15110 (flashed custom prl). could this be a hardware issue? even tho the other sounds still play through the external speaker?
Thanks
It's been an issue with AOSP-based ROMs for quite awhile. There's no fix.
Try flashing the latest GB27 ROM.
Sent from my SPH-D710 using Tapatalk
Bummer, it even occurs when I flash or Odin stock ROMs though. I can't use the gb27 ROMs yet as I haven't been able to successfully convert them to uscc yet. I got an unbranded (no carrier) gb28 but MMS is still an issue.
Sent from my SCH-R760 using Tapatalk
htrowpiks said:
Bummer, it even occurs when I flash or Odin stock ROMs though. I can't use the gb27 ROMs yet as I haven't been able to successfully convert them to uscc yet. I got an unbranded (no carrier) gb28 but MMS is still an issue.
Sent from my SCH-R760 using Tapatalk
Click to expand...
Click to collapse
GB27 and GB28 are essentially the same thing... Did you change your mmsc url and apn?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yep, used gesture search to open apns and think it was ##data#? That opened the other settings menu, but mms didn't work.
Maybe I missed something somewhere. I have the odin flashable gb28, used the cwm installer bat file, and flashed the agat recovery. after that I got bootlooped, and the factory reset/wipe didn't fix it. Maybe I could use the TWRP recovery instead? I did spend a lot of time trying to get the Touched by an S4 rom to work, but I still got bootloops with that one as well. I used the jb format all x2 zip before install, but I was thinking that maybe I flashed it from the wrong recovery. Im gonna go re-read the op instructions again and maybe take another swing at it. Any suggestions would be welcome, along with hints, tips, clues, and up to and even including "hey dumbass you forgot to ......"
thanx
Sent from my SCH-R760 using XDA Premium 4 mobile app
Twrp will not work with Touchwiz based ROMs. Odin to gb28, then Odin agats kernel. Avoid any cwm installers.
Sent from my SPH-D710 using Tapatalk
HighxVoltage said:
Twrp will not work with Touchwiz based ROMs. Odin to gb28, then Odin agats kernel. Avoid any cwm installers.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Successfully odin'd gb28 and then odin'd agat. also was able to modify ACPverter (uscc zip mod) to change build prop and eri.xml in framework-res, still no luck on getting the apn settings to stick (MNC MCC wont take, dont know the correct values and the old ones wont work), also ##3282# , and ##72786# won't work and I am unable to change the MMSC url.
All that being said it is still running very well and thanks again for the advice on odin'ing everything. if only I could odin tbs4, anyway its a good starting point and stable enough for me to mess around with even though the speakerphone still refuses to work....
ok so I did some reseach and found that the speakerphone issue is from the sprint kernels, around cm10.1 they start to break the Bluetooth and speakerphone, prior builds have success in some cases. time to odin the hell out of it and see if I cant get it back! I have about 4 different tar files for ICS and Gingerbread, and I am gonna give them all a shot
Note: while odining the gingerbread build, after reboot it showed "decrypting meta data" and some other things I couldn't read it fast enough....weird.....
ok stock ics, stock rooted ics, stock gingerbread, stock unbranded JB, stock pit files with ics and gingerbread = no bueno speakerphone/Bluetooth!!!!! anyone got any other suggestions?
Update. I also changed the speaker/antenna that is mounted inside the housing at the bottom of the phone. I replaced it with one from a sprint branded phone and still no luck... S3 arrives next week..
Sent from my SCH-R760 using XDA Premium 4 mobile app
I just rooted my wife's Sprint Galaxy S3 (d2spr) and managed to install Cyanogenmod 10. Back when we were on another carrier, I had installed later versions of the ROM, but only after a LOT of reading. Running the latest CWM, running the latest TWRP, doesn't matter. I cannot install later versions. The wiki says:
WARNING: Firmware update notice
CM10.1 and newer are not compatible with ICS bootloaders on this device. Update your device's firmware or you will get assert failures in recovery.
That is exactly my problem, but how do I perform this firmware update? I hope it's not an issue of reverting to stock, because Knox was enough trouble to overcome. I referred to this thread http://forum.xda-developers.com/showthread.php?t=1787677 to update the baseband, which just stopped the phone from connecting to towers.
What am I missing? Where do I get this firmware? Once updated, will I then be able to avoid further Status 7 errors? (Editing the updater-script every time seems like a hoaky band-aid when one has downloaded the exact, correct, tailor-made ROM.) Thanks a lot to the community. I've learned everything I know from these forums, and I felt like I had hit enough of a dead end to ask for help.
I think you would have to odin a stock jb .tar, NOT KITKAT and then you reroot and flash whatever rom you want. Some of your concerns might be alleviated if you use tibu and back-up apps to an external sd, as well as nandroid to an external sd.
Edit: CNexus or Freeza might have their stock .tars for jb versions around here, they even come rooted too
Edit 2: This thread might have what you need: http://forum.xda-developers.com/showthread.php?t=1910947
I suggest waiting until someone else confirms though (but if I'm right you'll want the link that says "firmware/modem/baseband update", the 5th link)
Sent from my SPH-L710 using XDA Free mobile app
sevenpioverthree said:
I think you would have to odin a stock jb .tar, NOT KITKAT and then you reroot and flash whatever rom you want. Some of your concerns might be alleviated if you use tibu and back-up apps to an external sd, as well as nandroid to an external sd.
Edit: CNexus or Freeza might have their stock .tars for jb versions around here, they even come rooted too
Edit 2: This thread might have what you need: http://forum.xda-developers.com/showthread.php?t=1910947
I suggest waiting until someone else confirms though (but if I'm right you'll want the link that says "firmware/modem/baseband update", the 5th link)
Sent from my SPH-L710 using XDA Free mobile app
Click to expand...
Click to collapse
why not the KK stock ND8 tar?
6th_Hokage said:
why not the KK stock ND8 tar?
Click to expand...
Click to collapse
Because i have read a bit about it and i believe that flashing the firmware might wipe internal data and it comes with knox as well. And from what you posted, all you need is a jb firmware. But that's also why I said to wait until someone more knowledgeable confirms what I'm saying
Sent from my SPH-L710 using XDA Free mobile app
sevenpioverthree said:
Edit 2: This thread might have what you need: http://forum.xda-developers.com/showthread.php?t=1910947
Click to expand...
Click to collapse
Just confirming, that's the correct one.
[BATTERY] Plasma Battery! v2a ??? & wickeddecimalbarwide_colors
Charging still shot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
n00b-xda-disciple's Wicked X Video review
Sent from my Sprint Samsung Galaxy SIII on TouchWiz 4.4.2 with Conquest: Singularity v5.2, Ktoonsez' latest kernel and the latest Philz Touch Recovery.
You people are awesome!
Thank you. I will try it tomorrow, and check back. Samsung has done a lot to thwart rooting lately, and I didn't want to close any doors by installing something TouchWiz-based.
Argh!
Link #5 is broken. Crap. Back to reading...
badmojorayman said:
Link #5 is broken. Crap. Back to reading...
Click to expand...
Click to collapse
If you go to that same thread and find the spoiler under "old versions" (bottom of post #1) you can flash the "MB1 firmware/modem/baseband update" as well
Sent from my SPH-L710 using XDA Free mobile app
badmojorayman said:
I just rooted my wife's Sprint Galaxy S3 (d2spr) and managed to install Cyanogenmod 10. Back when we were on another carrier, I had installed later versions of the ROM, but only after a LOT of reading. Running the latest CWM, running the latest TWRP, doesn't matter. I cannot install later versions. The wiki says:
WARNING: Firmware update notice
CM10.1 and newer are not compatible with ICS bootloaders on this device. Update your device's firmware or you will get assert failures in recovery.
That is exactly my problem, but how do I perform this firmware update? I hope it's not an issue of reverting to stock, because Knox was enough trouble to overcome. I referred to this thread http://forum.xda-developers.com/showthread.php?t=1787677 to update the baseband, which just stopped the phone from connecting to towers.
What am I missing? Where do I get this firmware? Once updated, will I then be able to avoid further Status 7 errors? (Editing the updater-script every time seems like a hoaky band-aid when one has downloaded the exact, correct, tailor-made ROM.) Thanks a lot to the community. I've learned everything I know from these forums, and I felt like I had hit enough of a dead end to ask for help.
Click to expand...
Click to collapse
Hold the phone! (Pun intended) There are two context clues in your op that lead me to believe that you should under no circumstances flash any firmware found in that firmware thread linked here.
1
badmojorayman said:
Knox was enough trouble to overcome.
Click to expand...
Click to collapse
If you have Knox your bootloader cannot be downgraded.
2
badmojorayman said:
I referred to this thread http://forum.xda-developers.com/showthread.php?t=1787677 to update the baseband, which just stopped the phone from connecting to towers.
Click to expand...
Click to collapse
The only time I've personally witnessed this behavior is on the ND8 bootloader. If you don't know which bootloader you're on already you would be wise to find out before flashing any firmware file.
You've all given good advice, but the best advice came too late. The phone no longer powers on because of the baseband update I was attempting. I'm now waiting for a MicroSD card to show up so that I can attempt this:
http://forum.xda-developers.com/showthread.php?t=2345860&page=63