Related
Hi all,
I have had my Galaxy Note 2 for about 3 or 4 months now. I rooted it when I got it, but lost root after a while, and didn't bother doing anything about it. So the only time I have played around with any of that stuff is when I first got it.
Now today, after using fine for most of the day, the screen just wouldn't turn on, and then I held down the power button, and it got stuck on the first screen it shows. I held down the power again, and this time the same screen showed up and got stuck, but it looked like the background was static, instead of plain black. Then the third time I tried restarting, the following message came up:
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
So I have a few questions. Is it bricked? Can I get my data off it (mainly concerned about messages, but would like everything if possible)? And how do I fix it?
Obviously I'm pretty new to this stuff, but I did try searching before posting this thread. Any help you can give me would be greatly appreciated.
Thanks
Ben
Try flashing stock rom with odin. Should work. Btw we're you on on 4.1.1 or 1.2 ?
Sent from my GT-N7100
Wtf man ?
This some kind of new ****ing syndrome ?
This is the second case...
Can you go into download mode ?
Can you flash anything like stock rom or pit file or recovery rom ?
Can you go into recovery ?
Sent from my GT-N7100 using xda app-developers app
Sorry, I can't be certain which version I had, but I think it was 4.1.2. I know that some of the early Note 2s didn't have the multi-window feature, but mine did, if that helps. I know it's not related to the firmware version, but possibly Samsung released both 4.1.2 and that feature in the same update.
Anyway, will flashing the stock rom keep my data? If not, I assume that's the only option? I found the following thread with instructions on flashing the stock rom:
http://forum.xda-developers.com/showthread.php?t=1896696
I bought the phone from Kogan (an Australian online store), so it is a Hong Kong model. Should I use one of the Hong Kong roms then? Which one (there are 6)? Possibly someone else with a Note 2 from Kogan could help here and with identifying the firmware version?
Look into this thread. ...
http://forum.xda-developers.com/showthread.php?t=2161866
Almost the same issue
Sent from my GT-N7100 using xda app-developers app
UtkarshGupta said:
Wtf man ?
This some kind of new ****ing syndrome ?
This is the second case...
Can you go into download mode ?
Can you flash anything like stock rom or pit file or recovery rom ?
Can you go into recovery ?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Sorry, didn't see your post before. I can go into download mode (it asks if I want to install a custom OS or restart), but trying to go into recovery just restarts to the same error screen. I haven't tried flashing anything yet because I would like to recover my data if possible.
That other thread does look like the same issue. I saw it before, but thought it was a different problem the first time I read it. So if I can't recover my data or flash the stock rom, I should try the USB jig and then warranty? I'll wait to hear back on the data recovery and stock rom questions first.
Try flashing stock rom.
Sent from my GT-N7100 using xda app-developers app
Yes flash stock it should work.
Sent from my GT-N7100
First thing you need is flashing stock ROM, if everything remains fine then you may not lose data, in case bootloop you may need to wipe.
dr.ketan said:
First thing you need is flashing stock ROM, if everything remains fine then you may not lose data, in case bootloop you may need to wipe.
Click to expand...
Click to collapse
Thanks, this is what I wanted to know. Now the next question is which stock rom to use. There are heaps listed on this thread:
http://forum.xda-developers.com/showthread.php?t=1896696
But I don't know which to use, or if it matters.
You can use any
Sent from my GT-N7100 using xda premium
I just tried flashing a stock rom. I used N7100ZSDMB1.
But it failed in Odin. This is the from the message box in Odin at the end of the operation:
<ID:0/024> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZSDMB1_N7100OZSDMB1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> sboot.bin
<ID:0/024> NAND Write Start!!
<ID:0/024>
<ID:0/024> Complete(Write) operation failed.
<ID:0/024> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
So what should I do from here?
I also noticed that in download mode it shows the following:
Odin Mode
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System status: Custom
Does the 'Custom Binary Download: No' mean that I could send it back under warranty as is? Or does 'System status: Custom' mean that they can see it has been rooted?
And is there still a chance of getting my data back, or does this mean it's not going to work?
Try to flash the original rom trough Kies if trough odin fails.
To do this, do the following:
1: Get your phone serial number from under the battery or go to the phone info/status and get it from there.
2: Put your phone into download mode but DO not connect it yet;
3: Open Kies,
4: In Kies, go to Tools and select the third function which is "Firmware Upgrade and initialization",
5:Enter the model number (ie. GT-N7100), hit OK,
6:Enter your serial number, hit OK,
7: You will be provided with the latest rom version for your phone, hit OK,
---(around now, or somewhere between steps 7-8 or 8-9, Kies should initialize and the download the firmware and Kies will act as not responding, DO NOT close it, it's the usual Samsung cheapness happening, soon it will restore itself, usually after 1-2 mins), do not worry about the phone not being connected).
8: Agreement stuff, etc. CONNECT your phone to the pc (while the phone is in dl mode), then the OK button should come out of the grey, thus clickable. Also make sure you agree to the therms otherwise no OK option for ya.
9: Magic is happening, Kies and your Note are doing their "mojo" now,
10: Wait and pray it gonna come alive again!!
In this way you should only upgrade and your actual data sould be save (considering your odin flash failed). If everything works as it should, your phone will be in the same status as it was the last time.
On the other hand, no you can't bring it back as under warranty. For that you need the following:
Odin Mode
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System status: Official
Good luck, let us know how far you went
Sounds like Kies will wipe my data. Is that the case? Do I have any options left to get my data off? That is my primary concern if it's at all possible.
No kies will not wipe your data at all. It will just inject the rom into your phone. Wipe is done separately trough the wipe menu. I've done it before and never lost anything, everything from messages, background etc were in place!
Plain and simple answer: if at the moment there is no other way to boot up your phone by any means, consider your data simply GONE. Odin, Kies or any other method that will help you boot your phone up without wiping are the only ways to save anything.
After all, saving your note is your first priority...for the rest...chit happends:S
Sorry, just saw your edit. So it sounds like it could save my data. I found this thread just before:
http://forum.xda-developers.com/showthread.php?t=2088809
which suggested that your data will be wiped.
What I posted above is the exact procedure
Thanks, and sorry for the late replies that make it seem like I am not reading your posts properly. Being a new member I have to wait 5 minutes between posts.
I will try Kies when I get a chance and let you know how it goes. Thanks again.
no worries
I've just gotten around to trying Kies, and got as far as entering my model and S/N, and the next thing I got was this message:
The device can be initialized to its original settings.
All settings and data will be deleted, and the latest
software version will be installed.
Do you want to proceed with the firmware upgrade and
initialization?
It says 'CAN be initialized to its original settings' so does this mean it's just an option? Matzone, have you seen this before when you have used Kies without wiping your data? I also didn't see a separate wipe option (unless this is what you were refering to), so I wonder if I'm using a different version of Kies. I have 2.5.2.13021_10.
matzone said:
After all, saving your note is your first priority...for the rest...chit happends:S
Click to expand...
Click to collapse
Actually, my Note is easily replaceable (although expensive) but my data cannot be replaced. I'd be surprised if most people don't see it the same as me. I've learnt a lesson though to take regular backups.
The title really says it all...I am trying to wipe my phone to put on wicked 9.1 and try some new kernels, but every time I go into recovery and tell it to do a factory reset/wipe, the phone goes on like it is gong to wipe but then about five seconds in, it just reboots. Hours right back into the normal boot procedure and boots up fine like I never told it to wipe.
still pretty new to all of this, I mean I got clockwork recovery on and have learned to flat kernels kitchens and roms, but that's about it. I've never had a problem like this before, but I can't figure out what to do to wipe my phone.
IHave also tried just installing the new room and telling the installer to wipe, but then it just reboots when it gets to that point.
Is there a different way to wipe the phone? I don't want to lose my personal data such s photos calender etc, I understand I'll lost sms longer normal but I back those up so that is ok
Any help for a kind of newbie?
on advance
Also have tried going to Mount/format partition on recovery and manually formatting the data partition...same thing phone just reboots after a couple seconds and acts like I did nothing at all to it
If I was too go to factory reset in the settings menu while the phone is booted up normally what would happen? It scares me cuz it looks like it would kill everything
Oh and I screwed up and accidentally deleted my nandroid backup...yea I'm dumb
Download goo manager.
Hit menu.
Choose "install open recovery script".
Verify it has identified your device correctly.
Let it download and install TWRP.
Reboot into recovery.
Make backup using TWRP.
???
Profit.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
re: rebooting issue
asaqwert said:
The title really says it all...I am trying to wipe my phone to put on wicked 9.1 and try some new kernels, but every time I go into recovery and tell it to do a factory reset/wipe, the phone goes on like it is gong to wipe but then about five seconds in, it just reboots. Hours right back into the normal boot procedure and boots up fine like I never told it to wipe.
still pretty new to all of this, I mean I got clockwork recovery on and have learned to flat kernels kitchens and roms, but that's about it. I've never had a problem like this before, but I can't figure out what to do to wipe my phone.
IHave also tried just installing the new room and telling the installer to wipe, but then it just reboots when it gets to that point.
Is there a different way to wipe the phone? I don't want to lose my personal data such s photos calender etc, I understand I'll lost sms longer normal but I back those up so that is ok
Any help for a kind of newbie?
on advance
Click to expand...
Click to collapse
Here is the best and most surest way to get your phone ready to flash the "Wicked 9.1" or any other custom rom.
(You made a good choice of wanting to flash the Wicked 9.1 rom, it's the best custom rom currently available for our phones.)
Since the recovery mode (wipe) is not functioning properly you will need to Odin flash the stock rooted rom
before flashing any of the custom roms.
By doing the following you will NOT loose any pictures, videos or emails
and you will not loose anything which is on the internal or external sdcard.
You will as you said loose sms UNLESS you go to the play store and download sms backup/restore app.
Here is a link for the SMS backup restore app: https://play.google.com/store/apps/...estore&feature=nav_result#?t=W251bGwsMSwyLDNd
If you already have a backup/restore app like Titanium backup I would advise to backup all your apps first.
That way you will be able to restore the backup/restore sms app but you will be able to restore all your other
apps too after flashing the wicked rom.
After you backed up the sms using this app and after you have flashed the wicked rom you will need to
re-download this backup/restore sms app from the play store in order to restore your sms after you have
flashed the wicked rom.
This step by step is the best, most reliable and cleanest way to restore your phone to a stock rooted T999
and will get the phone ready for the new custom wicked rom to be flashed without any further problems.
Here is the step by step guide:
After you have followed these instructions your phone will be in the same condition
as it was the day you purchased it except for the benefit of being rooted.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download ODIN it's required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
After it's downloaded extract Odin into the same folder you made containing the T999 TAR file.
Download the stock-rooted Odin flash firmware for the T999 Tmobile Galaxy S3
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache! (It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Didn't work at all...I'm fact, now I can't even boot into recovery it just reboots after a few seconds at the teamwin screen....
Also before I did this last thing with goo manager, I tried fixing permissions and the same thing happened it just reboots a few seconds after telling it to fix permissions in recovery
I'm really worried...I can't even get into recovery and I'm scared I'm gong to have a broken phone here shortly
Even worse my phone is my only internet connection right now
Misterjunky said:
Here is the best and most surest way to get your phone ready to flash the "Wicked 9.1" or any other custom rom.
(You made a good choice of wanting to flash the Wicked 9.1 rom, it's the best custom rom currently available for our phones.)
Since the recovery mode (wipe) is not functioning properly you will need to Odin flash the stock rooted rom
before flashing any of the custom roms.
By doing the following you will NOT loose any pictures, videos or emails
and you will not loose anything which is on the internal or external sdcard.
You will as you said loose sms UNLESS you go to the play store and download sms backup/restore app.
Here is a link for the SMS backup restore app: https://play.google.com/store/apps/...estore&feature=nav_result#?t=W251bGwsMSwyLDNd
After you backed up the sms using this app and after you have flashed the wicked rom you will need to
re-download this backup/restore sms app from the play store in order to restore your sms after you have
flashed the wicked rom.
This step by step is the best, most reliable and cleanest way to restore your phone to a stock rooted T999
and will get the phone ready for the new custom wicked rom to be flashed without any further problems.
Here is the step by step guide:
After you have followed these instructions your phone will be in the same condition
as it was the day you purchased it except for the benefit of being rooted.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download ODIN it's required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
After it's downloaded extract Odin into the same folder you made containing the T999 TAR file.
Download the stock-rooted Odin flash firmware for the T999 Tmobile Galaxy S3
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache! (It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Click to expand...
Click to collapse
thanks so much!!! by saying it didn't work at all, i meant the goo manager thing... i am just going to start trying what you've said here now...
thank you SO much, this is what forums should be about... thank you for not telling me to go search or stuff like that, cuz i didn't know what to search for or what i could even try at this point, and i don't want to risk ruining a phone i can't afford to replace!!
thanks again
will update on the results....
also what recovery is the best one currently? would you recommend the one that is installed by GooManager or should i go back to clockwork mod recovery? or the TWRP or whatever is it called?? just don't know enough about what is current... am a single daddy now and can't really afford that much time to muck about with my phone.... basically i take a night every couple of weeks to find out if there is a new ROM or Kernel that i could benefit from but i just can't seem to make/find the time to keep up to date on everything.....
thanks again!
re: flashing
asaqwert said:
also what recovery is the best one currently? would you recommend the one that is installed by GooManager or should i go back to clockwork mod recovery? or the TWRP or whatever is it called?? just don't know enough about what is current... am a single daddy now and can't really afford that much time to muck about with my phone.... basically i take a night every couple of weeks to find out if there is a new ROM or Kernel that i could benefit from but i just can't seem to make/find the time to keep up to date on everything.....
thanks again!
Click to expand...
Click to collapse
I have used both CWM and TWRP (goomanager) and TWRP for me is the best.
If I were you I would not mess with any kernels until you get a better understanding
about customizing your phone, flashing, adding mods, what kernels do and why many
people like to change the stock kernels to custom kernels.
I have tried all the custom kernels and I cannot see the purpose of doing so.
With custom kernels you can make the phone respond faster but then you
sacrifice battery life, if you want better battery life you can adjust these kernels
so they use less battery power but then you sacrifice the phone's responsiveness.
I think that the manufacturer of the phone got it just about right with the stock kernel.
A good balance between speed and battery consumption.
Good Luck!
OH MY GOD... what the hell do i do... i'm getting so choked here now...
tried ODIN, wouldn't work... it gave me the following output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDLJA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
what do i do??? it won't let me do anything... i'm just freaking right out now...
whenever it tries to do anything with the data partition it seems to just force reboot.,..
any ideas? please help me here...
re: try this
asaqwert said:
OH MY GOD... what the hell do i do... i'm getting so choked here now...
tried ODIN, wouldn't work... it gave me the following output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDLJA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
what do i do??? it won't let me do anything... i'm just freaking right out now...
whenever it tries to do anything with the data partition it seems to just force reboot.,..
any ideas? please help me here...
Click to expand...
Click to collapse
Try this, do the same thing you done before but instead of using the stock rooted firmware
try this one: http://www.androidfilehost.com/?fid=9390169635556426424
This is the 100% stock firmware WITHOUT root.
The firmware is identical to what all the T999 phones came with from Samsung.
If this flashes successfully you will need to ROOT the phone before you do anything else.
Right now your phone is in the same condition as it was before trying to flash the stock rooted firmware.
Good Luck.
sorry for the freak out post, i just actually AM freaking out.... when i was mucking about with ODIN i realized i had used it before with the SGS3 toolkit for snapdragon v2.1, so i figured maybe i could try to put a stock rom on that way, well all i could get on was a stock recovery, then i put on a CWM recovery using the toolkit and ODIN, and for whatever reason, that recovery will only read my external SD card and not my internal one, and will only let me flash off that... some how, and thankfully, i had a FreeGS3 7.1 rom on there that i was able to flash, as it wouldn't boot up at all after the failure with ODIN... now i got it booting into FreeGS3 7.1 but it is acting really odd... slower than anything, it's slower than my old HTC maple was, feels like an old phone on froyo or something....
so any other idaes? thanks for the help so far
p.s. about the kernels, i've had pretty good luck up until now with sticking with kernels by some of the really experienced devs, like morphic and faux123, and the biggest reason i want to muck about with them is so that i can undervolt my phone, and get a little longer battery life.... i can deal with a LITTLE bit of a loss of performance, as i rarely do much more than browse the web, text, email, and call on my phone, maybe read the news on the BBC app, and do other stuff like that, but no gaming ever, and don't watch much for video on it either, so i really can't tell the difference in speed too much if i have it set up for slightly better battery life
but at this point, i honestly just want it to work again! i just want to be able to wipe it and start from square one! i don't think i could even bring it back to the store for a warranty because they're going to obviously see that i had a different ROM on it than stock
Misterjunky said:
Try this, do the same thing you done before but instead of using the stock rooted firmware
try this one: http://www.androidfilehost.com/?fid=9390169635556426424
This is the 100% stock firmware WITHOUT root.
The firmware is identical to what all the T999 phones came with from Samsung.
If this flashes successfully you will need to ROOT the phone before you do anything else.
Right now your phone is in the same condition as it was before flashing the stock rooted firmware.
Good Luck.
Click to expand...
Click to collapse
before i do this, i'm just wondering if you have any idea why it might be acting this way? i just feel like i'm going to have the same kind of trouble i just had with this rom, as it was obviously having issues with wiping the data partition and/or another area.... i just don't want to muck about too much and end up with a brick... so any ideas why it is doing this and if there is just simply some sort of command i can use to force it to do a wipe, using ODIN or the toolkit, or something else? if so, i'd need some help getting it right, thats for sure
i also am using my phone to tether my computer, as we don't have internet at home for this month, so i really kind of need to know if something SHOULD work or if it is just a shot in the dark, beause if it is a shot in the dark and it fails and i can't get my phone booted again, then i can't even get on the net to post info and get more help.... i'll be screwed and i just realized that my boss wanted to call me in the morning, i thought he was calling friday morning not tomrw
asaqwert said:
before i do this, i'm just wondering if you have any idea why it might be acting this way? i just feel like i'm going to have the same kind of trouble i just had with this rom, as it was obviously having issues with wiping the data partition and/or another area.... i just don't want to muck about too much and end up with a brick... so any ideas why it is doing this and if there is just simply some sort of command i can use to force it to do a wipe, using ODIN or the toolkit, or something else? if so, i'd need some help getting it right, thats for sure
i also am using my phone to tether my computer, as we don't have internet at home for this month, so i really kind of need to know if something SHOULD work or if it is just a shot in the dark, beause if it is a shot in the dark and it fails and i can't get my phone booted again, then i can't even get on the net to post info and get more help.... i'll be screwed and i just realized that my boss wanted to call me in the morning, i thought he was calling friday morning not tomrw
Click to expand...
Click to collapse
The only thing I can think of right now is that you tried to flash some custom kernel or rom which
was not compatible with the phone if this is the case then that's what started the problem.
If the above is true then I would try to flash the STOCK kernel without trying to WIPE anything.
Here is the STOCK kernel you can flash in TWRP or CWM: http://dl.xda-developers.com/attach.../51821620/1/4/3/4/1/6/1/T999UVALH2-Kernel.zip
Try flashing this stock kernel first, if it does not help I would go ahead and ODIN flash the un-rooted stock firmware.
As long as you can get into download mode your phone is NOT bricked.
Good luck!
Did you try verifying the checksum?
First, yea checksum is all good
, that kernel won't download it just says error 410 - gone
other links?
,Honestly, I don't feel it is anything to do with the kernel...I think that something has changed some setting to do with the data partition or something
you do a factory reset/ wipe, what exactly does the phone wipe? Can I do this manually with adb or something? If so, how? Sorry to ask for this kind of help but I'm at my wits end, I'm honestly just about to lose it, the other reason I wanted to flash wicked 9.1 is that my phone was getting slow and unusable something was going on with it....I'm honestly almost in tears with this as I can't afford to buy anything right now and I need my phone to work for work, or I can't make ANY money, so right now I'm screwed. I've never had anything even similar to this happen before
Please help me get this back to working....as it is it is unusable and laggy to they point where I can't do much of anything....I'm actually at Tim Horton's on their Wi-Fi with my laptop trying to get it to work because my phone is so messed up
Factory reset wipes your data partition. And I guess some other things. What was it you tried to Odin? Was it stock UVDLJC? Try both Odin versions in my signature, as some people have had issues with the newer one.
I recommend trying that. Because if that doesn't work, my money is on hardware failure.
Aerowinder said:
Factory reset wipes your data partition. And I guess some other things. What was it you tried to Odin? Was it stock UVDLJC? Try both Odin versions in my signature, as some people have had issues with the newer one.
I recommend trying that. Because if that doesn't work, my money is on hardware failure.
Click to expand...
Click to collapse
Well I'm trying to flash basically anything that might help me be able to wipe my phone so that I can either go back to stock and warranty the phone if there are legit problems with the hardware, or what is more likely is that there is just some file that got corrupted and is forcing the phone to reboot when I try to wipe. In that car I just want to be able to wipe and install wicked 9.1.
Dos anyone have a working link to the stock kernel? The link provided above does not work
And are there any other ideas? I just find it hard to believe that there is a hardware failure when the phone has been working fine, just getting a little laggy, and honestly I just wanted to upgrade to the new wicked Rom....I just find it very hard to imagine that a hardware issue is causing me to not be able to wipe but I can still use the phone normally in every other way
Again, is there a way to manually wipe using adb ro some other program? If so how, and what exactly do I wipe and what do I leave alone? I've managed to copy everything I want to save over from my phone so I should be ok to format whatever I need to
Please help! And thanks again and thanks in advance
Oh and by ghee way Odin will let me flash a new recovery, it is only when I try to flash one of the two stock roms that were linked above that it errors out....I haven't tried anything else with Odin yet, not really sure how
I flash a normal Rom file with Odin? How so?
Aerowinder said:
Factory reset wipes your data partition. And I guess some other things. What was it you tried to Odin? Was it stock UVDLJC? Try both Odin versions in my signature, as some people have had issues with the newer one.
I recommend trying that. Because if that doesn't work, my money is on hardware failure.
Click to expand...
Click to collapse
oh and when i go to the link for the older version of odin that is in your sig, it says that it can't find it....any help there?
this is what i got with the Odin 1.85 that i got from your sig... i got it working, was something in my hosts file blocking access to the site... my bad there
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDLJA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any ideas?
also, on the phone screen itself, it says the following:
ODIN MODE
PRODUCT NAME: SGH-T999V
CUSTOM BINARY DOWNLOAD: Yes (5 Counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
SECURE CHECK FAIL: aboot
so any ideas what the crap is going on?
So do you have a t999 or a t999v?
You can access the proper t999v firmware from my signature.
I just cannot believe this happened.
After all the drama with the Sony Z2, my brand new Galaxy Tab S 10.5 died on me.
This morning it woke me up, I unplugged it from the charger, put it in my bag and went to work.
After some time I wanted to check my messages, but I was looking at big SAMSUNG logo.
I restarted it with Power key + Volume Down. It gets past the Samsung Galaxy Tab S logo and gets stuck at the SAMSUNG logo.
I can get into Download Mode (Power key + Volume Down + Home key) but I cannot get into recovery (Power key + Volume Up + Home key) this combination of buttons gets me stuck at the Samsung Galaxy Tab S logo.
Any advice?
BUMP
I've tried Kies, but no luck.
It downloads the firmware after I enter my serial number, but then it stays at 0% and nothing happens.
Is there any way I can reset it with Odin, but keep my warranty, because I will return it tomorrow... but my account and data is on it.
I hope it will be unaccessible...
No help for me?
Download your device firmware from sammobile. Its has to be your exact model. Once its downloaded extract it to your desktop and open up odin. Go into download mode, and plug the tab s into your pc. Now in odin click the ap or pda tab and pick the extracted firmware. Then just hit start and it will flash. It shouldnt viod warrenty. Your gonna take it back anyway? If so tell them to reset everything so it doesnt have your info on it.
Thank you for your response, but no luck for me...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1ANG1_T805VFG1ANG2_T805XXU1ANF7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
I just hope they can delete everything
And I'm giving up on buying a new tablet.
This is insane.
dhalan said:
Thank you for your response, but no luck for me...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1ANG1_T805VFG1ANG2_T805XXU1ANF7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
I just hope they can delete everything
And I'm giving up on buying a new tablet.
This is insane.
Click to expand...
Click to collapse
The firmware has to be from your country. Personally I never use odin to flash anything. I use twrp recovery. Anyway this could be a pit problem or a country firmware lock. Sometimes I hate odin lol
That's the firmware Kies downloaded after the serial no. input.
I tried different versions of Samsung USB drivers and different version of Odin, but nothing works.
Time is running out, I have to return the device...
dhalan said:
That's the firmware Kies downloaded after the serial no. input.
I tried different versions of Samsung USB drivers and different version of Odin, but nothing works.
Time is running out, I have to return the device...
Click to expand...
Click to collapse
Solved? i have same problem. I need help.
Tiago Antunes said:
Solved? i have same problem. I need help.
Click to expand...
Click to collapse
Can you get into stock recovery? If not flash the stock recovery for your device then wipe the cache.
DUHAsianSKILLZ said:
The firmware has to be from your country. Personally I never use odin to flash anything. I use twrp recovery. Anyway this could be a pit problem or a country firmware lock. Sometimes I hate odin lol
Click to expand...
Click to collapse
thanks. solved.:laugh:
Have same problem
I have same problem after installing miracast enabler and activated 2nd option. It get stuck on Samsung logo and can't go to recovery or anything else. Tablet is rooted with CF-ROOT and even PC dun detect it.
Any ideas ?
Thx
Flash twrp and then do a factory reset. Press and hold Power + Vol down + Home. As soon as it restarts keep holding Power + Home but hold Vol up instead.
This will boot into recovery.
grA$ said:
I have same problem after installing miracast enabler and activated 2nd option. It get stuck on Samsung logo and can't go to recovery or anything else. Tablet is rooted with CF-ROOT and even PC dun detect it.
Any ideas ?
Thx
Click to expand...
Click to collapse
IInstaller original firmware for you country.
grA$ said:
I have same problem after installing miracast enabler and activated 2nd option. It get stuck on Samsung logo and can't go to recovery or anything else. Tablet is rooted with CF-ROOT and even PC dun detect it.
Any ideas ?
Thx
Click to expand...
Click to collapse
I am stuck on the logo as well.... Can somebodi help?
svetlio89 said:
I am stuck on the logo as well.... Can somebodi help?
Click to expand...
Click to collapse
Nothing is stopping you from going into recovery. It's highly unlikely you have lost it.
Press the right combination of buttons at the right time and you will enter recovery.
Power + Vol down + Home then when the screen goes blank change to Vol up while still holding the other 2 buttons. Hold until recovery boots
Thanks! This worked
I received OTA Update from 4.4.4 to 5.0.2
But I rooted My device and replaced recovery partition
I think if Apply ota update my device will break ! ( Because of loosing stock recovery )
Can anyone Uploade stock recovery for T805
rasoooli said:
I received OTA Update from 4.4.4 to 5.0.2
But I rooted My device and replaced recovery partition
I think if Apply ota update my device will break ! ( Because of loosing stock recovery )
Can anyone Uploade stock recovery for T805
Click to expand...
Click to collapse
The update will replace the recovery with stock. It won't brick your device.
T805 won't boot after a TWRP advanced wipe
Dear friends,
Today I have met an error saying me that "Emergency service has stopped" and this message continued to reappear after every boot.
So I have choosen to do a wipe. I have installed TWRP recovery, after that I did an advanced wipe selecting all but ext-sd checkbox.
After that wipe my device stuck on galaxy tab logo and won't boot, neither I have been able to enter recovery mode.
So, I have used Odin to install twrp again, and now I am able to enter in recovery mode, but when I restart the device it won't exit from boot logo.
Why it cannot boot?
What can I do?
Thanks guys!
It won't boot now you've wiped everything. You need to reinstall the stock Rom.
ashyx said:
It won't boot now you've wiped everything. You need to reinstall the stock Rom.
Click to expand...
Click to collapse
Thank you ashyx!
What options have deleted what we do not have to delete to do a factory reset?
And yes, I'm downloading the firmware, but it will take almost 10 hours!
Rapidgator free is very slow!
Do you know any faster resource? Version is T805XXU1BOD2
Cheers
I tried rooting my note with ODIN following directions from this site and seem to have bricked it. I had rooted it several months ago but had a random rebooting problem so I un-rooted it then did a factory reset and my random rebooting went away so I wanted to try rooting again. Every thing seemed to go OK until the end. Towards the end I get
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The tablet stays in the download position. It will not restart. If I try to restart it I get the following message
Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
I don't know how to get to Kies. The only thing I can get to is ODIN MODE - Downloading. I can not even turn the tablet off.
I have spent half a day searching this site for a solution because I don't like to have to ask for help but I am stuck. I have tried so many things I may have made it worse. Any help I can get will truly be appreciated.
The model number is SM-P900ZWVXAR
Thank You
Do a Google search for your stock firmware and flash with odin
Thank you tgamble160 for the quick response. I couldn't find the firmware for my phone by model number. Couldn't find firmware for the Galaxy Note Pro 12.2 (wifi) for the US or North America either. Could find it for just about any other country. I could find a Cellular south (XAR) firmware from SamMobile that I believe will work. It is a slow download. I tried to pay for a faster download but it did not go through so the slow download. In another hour I should have it and will let you know if it worked.
It worked. It is 2am here. I am going to bed and will try rooting it again when I get up.
Hi all,
I already searched here and found no solution of my problem. I hope you could help me out.
- I have my Note II for 3 years and it never had any problem until today, when it rebooted by itself and now stuck at "Galaxy Note II" screen. I have tried all of the following:
1) Removed battery, retry many many times, same thing
2) Try to put it in recovery mode by VOL_UP+HOME+POWER, the same "Galaxy Note II" showed up and nothing further
3) I was able to put it in download mode but that didn't help
4) I tried different battery, same thing
5) when I plugged in the USB charger, the battery icon showed up with no battery level and only a circle on top of it.
Please advise what I should do next? My Note II was running stock firmware 4.1.2 and rooted. No CWM. It's a T-Mobile (model SGH-T889) if that makes any difference.
THank you very much in advance!
Mike
Did you try reflashing a stock rom?
Btw, T-Mobile note 2 forum is here: http://forum.xda-developers.com/note-2-tmobile
No I haven't tried. Will reflashing stock firmware remove all my data?
Thank you!
Sent from my SM-T230NU using Tapatalk
It's kind of dangerous to reflash the firmware now that the battery level is not known and it's not charging.
Sent from my SM-T230NU using Tapatalk
Ok, I tried almost everything in xda and I just could not get into recovery. It always stuck at the "Galaxy Note II" logo.
At this point, I'm willing to try anything, I have nothing to lose, right?
Things I already tried:
- Reflash OEM firmware with ODIN (from Sammobile, different version from 4.1.2 to 4.3)
- Flash TWRP
- Restore firmware with Kies
ODIN always said PASS. When rebooted, it just stuck on logo and I could not put it in RECOVERY using VOL-UP+HOME+POWER. Putting it in DOWNLOAD is fine.
Any suggestions? Anything at all?
Thank you!!!
mike-
PS: It's not carrier specific so I'm putting it here to solicit more inputs. Thanks.
When the phone powers on, which code runs first? I would assume the 'bootloader'? Then it tries to load the kernel.
When we press VOL-UP+HOME+POWER, the RECOVERY code runs. Yes? The flashing of stock firmware would restore this RECOVERY code but I could not put it in RECOVERY.
When we press VOL-DOWN+HOME+POWER, the download mode is run. Where is the download mode code?
What happens when you try to reboot to recovery? You let the power button go when the phone powers up but keep holding down home and volume up?
audit13 said:
What happens when you try to reboot to recovery? You let the power button go when the phone powers up but keep holding down home and volume up?
Click to expand...
Click to collapse
When I pressed VOL_UP+HOME+POWER, the logo "Galaxy Note II" came up. I released the POWER button while keeping VOL_UP+HOME. The logo stayed there forever.
Believe me, I have tried almost everything several times
I try to understand what happened (I'm an embedded software engineer but in a totally different discipline).
- The RECOVERY code is in a different partition/section of the ROM, yes? Same as DOWNLOAD code is in a different partition, I assume? because I could go into DOWNLOAD mode with VOL_DOWN+HOME+POWER just fine. Does it mean that the RECOVERY code was corrupted? But it doesn't make sense, because by reflashing the stock firmware, the recovery code was replaced, together with the bootloader and OS, yes?
I reflashed many times and nothing was changed. I could never go into RECOVERY and it always stuck at the logo.
- I reflashed TWRP too but I could not go into RECOVERY after flashing with ODIN.
- What exactly is the boot sequence when power is ON? I would assume the bootloader got executed, then it tried to initialize the hardware, then loads the kernel from the flash.
Any other suggestions? Again, I already tried all the "normal" recovery stuffs without success...
Thank you!
mike-
Tried flashing stock rom with a pit file? If this doesn't work, a jtag fix may be required.
Boot sequence sounds right but I am not a software or hardware engineer.
audit13 said:
What happens when you try to reboot to recovery? You let the power button go when the phone powers up but keep holding down home and volume up?
Click to expand...
Click to collapse
audit13 said:
Tried flashing stock rom with a pit file? If this doesn't work, a jtag fix may be required.
Boot sequence sounds right but I am not a software or hardware engineer.
Click to expand...
Click to collapse
ODIN reported no error when fetching PIT file though...
I briefly looked at the JTAG patch and if all ever fails and I have no more suggestions, I may go there
I searched here on XDA and google and it seems this is a pretty common problem and there was no real solution. Everyone said to go into RECOVERY and wipe cache but I could not go into RECOVERY. Everybody said to reflash the firmware but I already did that at least a dozen times with different versions for stock firmware. ODIN always reported PASS and SUCCESS. But it still stuck on logo .
Does Odin have auto reboot checked?
audit13 said:
Does Odin have auto reboot checked?
Click to expand...
Click to collapse
I tried it with and without. With AUTOBOOT checked, it reboots by itself then stuck at logo.
WIthout autoboot checked, I removed the battery then reinsert and power it on, same thing: stuck at logo.
Yes, I tried almost everything and combination of them
ODIN never gave any error. I even tried different version of ODIN. Here is a typical log:
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVBMD1_T889TMBBMD1_935627_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> modem.bin
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> sboot.bin
<ID:0/005> tz.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!
Do no check auto reboot. After a success flash, remove USB cable from the phone, remove battery, replace battery, and then use button combination to boot to recovery,factory wipe, and reboot. Letting the phone boot after flashing a stock rom without wiping first may be causing the problem.
audit13 said:
Do no check auto reboot. After a success flash, remove USB cable from the phone, remove battery, replace battery, and then use button combination to boot to recovery,factory wipe, and reboot. Letting the phone boot after flashing a stock rom without wiping first may be causing the problem.
Click to expand...
Click to collapse
I already tried what you just said. No luck. It wouldn't go into RECOVERY, so I could not wipe.
That's what I'm confused: if the RECOVERY was bad, reflashing it would replace the RECOVERY code in flash. But it did not seem to work...
I have also reflashed just TWRP, with NO check on AUTOBOOT. Then I pulled the battery, reinserted it, pressed VOL_UP+HOME+POWER, still stuck at logo and it would not go into RECOVERY.
I think you may be out of options except for a jtag.
If the service is too expensive, maybe look for a phone with a smashed screen and working motherboard?
Any particular reason you are flashing such an old rom?
http://www.sammobile.com/firmwares/database/SGH-T889/
audit13 said:
I think you may be out of options except for a jtag.
If the service is too expensive, maybe look for a phone with a smashed screen and working motherboard?
Click to expand...
Click to collapse
I think I'm going to get a Note 4 from ebay, then I will use this Note 2 as an exercise to explore JTAG...
testrider said:
I think I'm going to get a Note 4 from ebay, then I will use this Note 2 as an exercise to explore JTAG...
Click to expand...
Click to collapse
I have your same problem.
Do you think it's a hard brick or just a soft brick?
If you can solve, can you tell me how you did?
There was really no reason for it to brick, . I was running stock firmware as from the factory...
Sent from my SM-T230NU using Tapatalk