Can someone please suggest a matte/anti reflective or another type of protector that helps with body oils but still works well with the s-pen?
Thanks!
Kind of pricey but if you go to the at&t website they have an anti finger print and ant reflective screen protector. The best one I've ever used. It's called ivisor.
Sent from my SGH-T889 using xda premium
JosephL said:
Can someone please suggest a matte/anti reflective or another type of protector that helps with body oils but still works well with the s-pen?
Thanks!
Click to expand...
Click to collapse
any screen protector should still work with the s-pen. You can actually use the s-pen without touching the screen by holding it at an angle and really close to the screen and using your finger to press the tip in.
Any way, the SGP screen protectors work well. I have the ultra oleophobic one which worked really well at first, but after a while it starts to pick up finger prints again. Not sure if it picks up less than the ultra crystal, but they also have a matte version I want to try out.
Zagg skins work really well. Practicaly unnoticeable when applied and they do a really good job repelling fingerprints for about a year then it starts to loose its ability to do so.
Penned with my Galaxy Note 2 via xda premium
Picked one from ebay for less than $2. Although it sat well and resists finger prints, using the S pen is definitely NOT the same as on bare screen. It works but even if you get used to increased friction, the pen tip will ware out a lot quicker.
There is the "Just Like Glass" from DBA Cases that claims its surface is smoother that the bare screen itself and the "official" samsung SP ETC-P1G2CEG from Clove which I do not know how ...official it is since I cannot find it on Samsung's site.
Anyone has tried these?
That's why you use a screen protector that has the anti-dazzling feature, like the following:
http://www.capdase.com/en/press_detail.php?id=161
http://www.youtube.com/watch?v=wpocrvZa3CM
http://www.youtube.com/watch?v=35hM-W0mf4I
:good:
CAPDASE ScreenGUARD for Samsung GALAXY Note II
Satisfy Different Requirement
Samsung GALAXY Note II was finally born! The Galaxy Note II, the first “Phablet” smart phone, with features of both a phone and tablet, comes with a 5.5 inch screen which is the best display screen Samsung has ever produced. When you have such brilliant phone, you definitely want to give it a prefect protection, especially to its high-tech touch screen. CAPDASE understood your needs deeply and launched ScreenGuard Collection for GALAXY Note II to give its screen a full prefect protection!
1) CAPDASE ScreenGUARD CF ARIS for Samsung GALAXY Note II
Curve Conformable & Crystal Clear
CF (Curve Conformable) ARIS is adopted special material and excellent process and more submissive than other protective film. ScreenGUARD CF ARIS is tailor-made for GALAXY Note II. It can overlay on the curve screen of the phone, and therefore can provide your GALAXY Note II a better protection. It is Crystal Clear. So, it is not easy to discover that there is CF ARIS on your GALAXY Note II. GALAXY Note II just like wearing invisible clothes. It can against scratching, scraping and abrasion. There will not be any residue marks left after remove the CF ARIS. It can keep your GALAXY Note II looks new all the time.
2) CAPDASE ScreenGUARD CF IMAG for Samsung GALAXY Note II
Curve Conformable & Anti-Fingerprint
CF (Curve Conformable) IMAG is adopted special material and excellent process and more submissive than other protective film. ScreenGUARD CF IMAG is tailor-made for GALAXY Note II. It can overlay on the curve screen of the phone, and therefore can provide your GALAXY Note II a better protection. It can perfect against scratching, scraping and abrasion. There will not be any residue marks left after remove the ScreenGUARD CF IMAG. It can keep your GALAXY Note II looks new all the time. When using clear protective film, it is often filled with fingerprints and that always cause inconvenience to the users. In view of this, CAPDASE has especially added Anti-Fingerprint materials on the surface of CF IMAG. Not only can it effectively prevent fingerprints, but it is also oil-free.
3) CAPDASE ScreenGUARD UT IMAG for Samsung GALAXY Note II
Ultra Anti-Fingerprints, Anti-Bacteria
Whenever you are working or playing with your GALAXY Note II, you may use the touch screen of the phone. Fingerprints must be one of the concerns and disturbances. CAPDASE understood users’ needs and launched the UT IMAG for you.
CAPDASE ScreenGUARD UT IMAG’s surface has special ultra anti-fingerprint costing to prevent fingerprints problem. Besides, it will not lower the sensitivity when you use your phone’s touch screen. UT IMAG can also anti grease. So, you can use your phone more freely without concerning about leaving fingerprints and grease on your phone. Besides of ultra anti-fingerprint function, UT IMAG can also control the activity of bacteria. UT IMAG has been taken anti-bacterial tests for two common bacteria, Escherichia coli (which may cause diarrhea and even fatal symptoms) and Staphylococcus aureus (which may cause vomit, diarrhea, abdominal pain and even collapse). After the thermo test and other tests, UT IMAG’s antimicrobial activity higher than 99.9%. UT IMAG can keep your phone’s hygiene effectively.
4) CAPDASE ScreenGUARD KLIA for Samsung GALAXY Note II
Ultra-Crystal Clear and Anti-Dazzling
Smart phone becomes the trend among phone industry. Users are not only pursuing for software but also for hardware. When using ordinary anti-fingerprint protectors on the market, there are some random colored pixels on phone displays. We call that dazzling. These undesired pixels that affect picture quality and might strain your eyes.
Reasons for the occurrence of dazzling
When the phone screen lights, the image displays on the screen through the LCD. The image of the light is transmitted vertically upward out. When using ordinary anti-fingerprint protectors, the light from your phone display is being diffracted in a chaotic manner by ordinary anti-fingerprint protectors. Diffraction breaks down the light into spectrums of colors, the picture quality is affected by these undesired pixels and it might strain your eyes.
Anti-Dazzling
To avoid dazzling from appearing on cell phone screen, CAPDASE's new ultra crystal clear ScreenGUARD KLIA is able to solve the problem. The brand-new CAPDASE ScreenGUARD-KLIA uses proprietary technology that allows in-line propagation of light through the ScreenGUARD, the difference is obvious! It is anti-fingerprints and it can preserve true picture quality.
Anti – Fingerprint
When using touch-screen smart phones, the screen is often filled with fingerprints and that always cause inconvenience to the users. In view of this, CAPDASE has especially added Anti-Fingerprint materials on the surface or ScreenGUARD KILA. Not only can it effectively prevent fingerprints, but it is also oil-free. The sensitivity of the phone screen is therefore increased and no fingerprints will be left on the seamless and smooth screen.
Unique Crystal Clear Technology
With the use of ScreenGUARD KILA, the proprietary crystal clear technology allows in-line propagation of light transmitted through the surface of the protector and can preserve true picture quality.
5) CAPDASE ScreenGUARD Sparko ARIS for Samsung GALAXY Note II
Diamond Glitter Crystal Clear
The origin of ScreenGUARD－Sparko ARIS is come from the diamond glitter materials was added to the crystal clear ARIS. When the phone in sleep mode, the effect especially obvious. When you are using the phone, the ScreenGUARD becomes crystal clear and gives you HD screen quality. ScreenGUARD Sparko ARIS can protect your phone from scratches, dirt, dust and so on. It can give your phone full protection.
6) CAPDASE ScreenGUARD ARIS for Samsung GALAXY Note II
Cyrstal Clear with Low Reflection
CAPDASE ScreenGUARD ARIS against scratches and keeps the perfect surface of GALAXY Note II. The ScreenGUARD ARIS is crystal clear. Although highly transparent, ARIS can reduce reflection caused by sunlight and lamplight. Applying the Professional ScreenGUARD ARIS on the surface of your phone is really an easy task. ScreenGUARD ARIS can be reused many times so that you can make alignments during application. There will not be any residues left on the surface of GALAXY Note II after removal.
7) CAPDASE ScreenGUARD IMAG for Samsung GALAXY Note II
Anti Fingerprint, Anti-Glare
ScreenGUARD IMAG not only can prevent fingerprints leave on your phone’s screen but it can also increase the sensitivity of your phone. You can hence using the phone in a more smooth way. IMAG even can prevent grease and reflections of light. You can watch the content on screen more clearly.
8) CAPDASE ScreenGUARD MIRA for Samsung GALAXY Note II
Mirror Surface, Crystal Clear
“Mirror, mirror upon the wall, who is the fairest of all?” Mirror is not only on the wall now but also on your GALAXY Note II. CAPDASE’s brand-new ScreenGUARD Mira can provide you a clear mirror anytime and anywhere. The professional ScreenGUARD MIRA fully covers the display screen of GALAXY Note II which can keeps your phone away from scratches and keeps the surface perfect. Of course the most highlighted feature is that it can also provide a new shiny mirror for you!
Applying the professional ScreenGUARD MIRA on the surface of the GALAXY Note II is really an easy task. The ScreenGUARD MIRA can be reused many times so that you can make adjustment to the alignment during application. There will not be any residues left on the surface of GALAXY Note II after removal. There are silver, gold, red, green and blue colors for you to choose. You can select the most suitable one to match your fashion!
9) CAPDASE ScreenGUARD Privacy ARIS 2-way for Samsung GALAXY Note II
2 Way Anti-Spy, Crystal Clear
CAPDASE launched ScreenGUARD Privacy ARIS for you. Even you use your phone in public areas, your personal information can be protected. CAPDASE ScreenGUARD Privacy ARIS is made by new material. The range of visible angles is 35 degrees. It can prevent horizontal peeping. It also has the functions of high transparence and low reflection of light which can let you use your phone smoothly and safely.
10) CAPDASE ScreenGUARD Privacy IMAG 4-way for Samsung GALAXY Note II
4 Way Anti-Spy, Anti-Fingerprint
CAPDASE ScreenGUARD Privacy IMAG is made by new material. The range of visible angles is 35 degrees. It can prevent horizontal and vertical peeping. It also has the functions of anti-fingerprint which can let the sensitivity of the phone screen is increased and no fingerprints will be left on the seamless and smooth screen.
Enquire hotline: (852) 3628 7500
Website: www.capdase.com
Facebook: www.facebook.com/Capdase
Weibo: weibo.com/capdase
Click to expand...
Click to collapse
winlinmac001 said:
That's why you use a screen protector that has the anti-dazzling feature, like ...
Click to expand...
Click to collapse
Did not say anything about dazzling problem...
Im using the Zagg screen protector and it works well with the pen and is anti glare.
Sent from my SGH-T889 using xda premium
any screen protector should work with the S pen since the wacom digitizer can detect the S pen hovering a few mm over the screen, adding .3mm to the screen won't suddenly prevent the digitizer from detecting the S pen, if anything, it's probably the S pen isn't responsive enough.
achusaysblessyou said:
any screen protector should work with the S pen since the wacom digitizer can detect the S pen hovering a few mm over the screen, adding .3mm to the screen won't suddenly prevent the digitizer from detecting the S pen, if anything, it's probably the S pen isn't responsive enough.
Click to expand...
Click to collapse
Its not that the S-Pen wont work
Its about the smoothness of the screen protector. I have used some protectors which make S-Pen bounce and really hard to move smoothly across the screen. The OP is looking for a screen protector that is as smooth as the screen so there is no bouncing of the S-Pen and its smooth to write.
This is the best one hands down.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-T889 using Tapatalk 2
The iSheilds work good. But rhe pen outs friggin little dots all over it so it looks like poop when the screen is off. And it got a scratch already too. Any ones that are resistent to that?
Sent from my SGH-I317M using xda app-developers app
Related
This is a review of the Samsung Galaxy S III: Diztronic Matte Back Clear TPU Case & Screen Protector.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will begin by stating that I am in no way affiliated with Diztronic in any way, and I am writing this review to provide to shoppers and readers my, and only my, opinions of the product that I have purchased.
Where to buy/Price:
Diztronic.com / $9.90 (pre shipping)
Amazon (where I purchased it due to prime shipping) / $9.90 free shipping
Features as listed on Diztronic.com product page:
• Made of Durable, Flexible TPU Material
• Matte Back Prevents Fingerprints - High Gloss TPU Frames the Display
• Bonus: Includes 1 Free Screen Protector Made of High Clarity 3 Layer Japanese Base Film
• Solid Protection from Drops and Scratches Protects Your Investment
• Shields Phone From Damaging UV Light
• Excellent Impact & Abrasion Resistance
• Stronger, Tougher Case Solution than Silicone
• Lay-On-The-Table Design Helps Protect Glass Screen from Damage when Placed Face Down
• Weighs Less Than 3/4 Ounce
• Precise Cutouts Gives Full Access to all Ports, Camera, Power Button, Volume Rocker
Intro:
I have never previously heard of diztronic cases before recently reading here in the Galaxy S III – Accessories sub forum. After reading how much praise they were receiving from Galaxy S II and Galaxy Nexus owners I decided to order the case and try it out for myself. I ordered clear over black as I hoped it would allow the natural beauty of the phone to be displayed. For $9.90… why not?
Case Review:
If I were to sum up the entire review into one sentence it would be this: This is a surprisingly nice case.
1) Case General Attributes
As we know the Galaxy S III is a little slippery due to the gloss back cover. This clear TPU case adds a nice subtle texture to the rear of the device that definitely eliminates that slipperiness but is not overbearing. The texture stops at the top of the brushed metal bezel that surrounds the Galaxy S III and from there on is a clear non textured gloss TPU plastic. I happen to enjoy this transition as I like the non-textured feeling around the rim. The clear nature of the case allows the true beauty of the Galaxy S III to show threw the case with a slightly frosted appearance. The case is also very thin and seems to add minimal bulk to the device. (This is only one of two cases I have used/reviewed to date for this device so take that with a grain of salt.)
2) Button Access/Cutouts
The cut-outs for power button, volume rocker, microphone, micro-usb, headphone jack, and flash/camera/speaker are correctly positioned and for the most part centered very respectively to their positions on the device. For example on other similar cases the micro-usb cutout is bigger than it needs to be for no apparent reason, on this duztronic case it is not. The case is molded very well. Nowhere do I see extra molding pieces, poor transitioning of textures, improper cutting, as one might in cheap cases.
3) Fitting
The case fits very snugly to the phone for the most part. If anyone has used a silicone case they know how easy they are to come off due to their extremely malleable construction… With this TPU case there is no worry of that. There are only two positions I worry about in the long term and those are the upper rim of the volume rocker and the power button. Those are the only two spots that I can detect any flimsiness at all. Still not silicone flimsy but more than I would like.
4) Protection
This case is no otterbox… but with that being said it does protect the entire device. Some other cases for some reasons do not cover the tops and bottoms of the phone, this one does. I have only tested this case with very minimal drops onto table tops and other less course surfaces. It does its job. I would say its main purpose is to prevent scratches, protect from minor drops, and add some peace of mind when placing on a table.
Bonus Free Screen Protector Review:
I am glad the case came with a free screen protector but it does leave something to be wishing for. I did not have a screen protector on my phone and this will hold me over until I find one that better suits my likings. The included screen protector is a peel and apply, thin, plastic screen protector. I enjoy this type of screen protectors over water application types (zagg, skinomi, etc.) as I find them easier to apply and usually have less possibilities of air bubbles and orange peel affects. As most screen protectors it does show more finger prints than the gorilla glass, although, that is to be expected. The protector is ultra-clear with no tenting or color distortion of any sort. I would give it a perfect rating if only it covered the full front of the device but it does not. This may be due to the slightly curved nature of the phones glass around the top and bottom, but it does not explain why the protector does not span fully left to right on the screen. If you’re looking for something to get you by this will do. If you want a screen protector that is not noticeable and offer full protection, look somewhere else.
Final Comments:
I am happy with the purchase. It is the best case I have ever purchased for under 10 dollars. The cut outs are perfectly positioned, it is not too thick, it has a lip to protect the screen, it is firm and not overly flimsy, it is slightly textured to add grip, and with it being clear it allows the natural beauty of the Galaxy S III to shine through. I would recommend this case to someone who is looking for a cheap option to add decent minimal protection to their device that doesn’t include much bulk.
---- Pictures in Post 2 ----
Pictures:
The sides of the display are curved exactly the same as the top and bottom. That's why the screen protector doesn't completely cover any of the edges.
yea your right about that. realized it after writing it. but still i would like to see a screen protector that accounts for that and still covers entire screen. It is the best free protector i have ever received though.
In your opinion, is it easy to pull the phone in and out of your pocket with the case on it?
Thanks for the review!
vpatel91 said:
In your opinion, is it easy to pull the phone in and out of your pocket with the case on it?
Thanks for the review!
Click to expand...
Click to collapse
Yes it is. I don't know if you ever had a seidio case or silicone case, seidio is rubber coated and silicone is like all rubber, they stick in your pocket and are hard to pull out, especially when sweaty. But this harder TPU material makes it much easier. It's not as easy as the slippery phone itself, but not hard. Haven't tried it in a tight set of jeans yet... As I find that to be the ultimate test.
Sent from my SPH-L710 using xda premium
Don't get this case in white. I bought one for my HTC One X and after a week it starts to get discolored.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Hmm. The screen protector covers the front-facing camera whereas most other ones have cut-out.
Do you have a matte white case, like the one in this review? or a glossy white case?
twinkdogg said:
Don't get this case in white. I bought one for my HTC One X and after a week it starts to get discolored.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
LLStarks said:
Hmm. The screen protector covers the front-facing camera whereas most other ones have cut-out.
Click to expand...
Click to collapse
Wow.... I didn't even notice that. It doesn't appear to affect quality, but then again I don't have an original photo to use as a control to test against.
Sent from my SPH-L710 using xda premium
Comando156 said:
Bonus Free Screen Protector Review:
I am glad the case came with a free screen protector but it does leave something to be wishing for. I did not have a screen protector on my phone and this will hold me over until I find one that better suits my likings. The included screen protector is a peel and apply, thin, plastic screen protector. I enjoy this type of screen protectors over water application types (zagg, skinomi, etc.) as I find them easier to apply and usually have less possibilities of air bubbles and orange peel affects. As most screen protectors it does show more finger prints than the gorilla glass, although, that is to be expected. The protector is ultra-clear with no tenting or color distortion of any sort. I would give it a perfect rating if only it covered the full front of the device but it does not. This may be due to the slightly curved nature of the phones glass around the top and bottom, but it does not explain why the protector does not span fully left to right on the screen. If you’re looking for something to get you by this will do. If you want a screen protector that is not noticeable and offer full protection, look somewhere else.
Click to expand...
Click to collapse
From our product description:
Regarding Screen Protector Sizing: Due to the tapered edge design of the Galaxy S III glass it was not possible to make our screen protector cover the glass all the way to the edge. Our screen protector covers the flat part of the glass only, as it would not adhere properly around the edges otherwise. This results in approximately 4mm of space from the edge of the display to the screen protector on all sides. This design choice will be consistent with the other static cling screen protectors on the market.
So basically it's just not possible to make it any bigger than we did or it would peel up along the sides. I would of loved to have them cut the full size of the screen, believe me! The screen is tapered on the right and left as well, so we couldn't of extended it that way either. If your looking for edge-to-edge protection you'll want to get an wet application screen protector, or the Nano from SGP which is an ultra thin PET film, but from my understanding even the Nano doesnt go all the way to the edge. I'm currently using the SGP FlexHD wet application screen protector on my GS 3 and it's pretty decent. I personally prefer PET but it's more important to me to have it go all the way to the edge so I'll settle for thermoplastic urethane on this device. I'm glad your happy with the quality of the screen protector though, we did switch to a Japanese based film which greatly increased our costs as they are 4x as expensive as the previous Korean PET film we were using. I think it's worth the added cost. I'm not sure how much longer we can continue to include them for free though. It doesn't make much sense that our Evo LTE case which doesn't include a screen protector is the same price as our GS III case which does. We'll probably increase the price of our cases that include a screen protector on our next major release by $1.00 to offset the added cost. Would you guys rather see us go back to the cheaper film and include the screen protectors for free, continue using the Japanese film and raise our prices by $1.00, or not include a screen protector at all and keep the prices where they are? Getting a Japanese based film screen protector for $1.00 more is a great deal in my opinion, SGP is charging $12.99 for their Japanese film, although you do get 2 of them for that price.
I really want to stress to you guys that these clear cases don't last as long as our black cases. I'm replacing mine about every 30-60 days because it either picks up blue dye from my pants or just becomes dirty. The matte finish makes it difficult to clean. If you are looking for longevity I'd go with black. If anyone's found a good way to clean them, and I'm sure there is some way to do it, please let me know!
Cool. Ordered one from Amazon earlier today. :good:
OneStepAhead said:
From our product description:
Regarding Screen Protector Sizing: Due to the tapered edge design of the Galaxy S III glass it was not possible to make our screen protector cover the glass all the way to the edge. Our screen protector covers the flat part of the glass only, as it would not adhere properly around the edges otherwise. This results in approximately 4mm of space from the edge of the display to the screen protector on all sides. This design choice will be consistent with the other static cling screen protectors on the market.
So basically it's just not possible to make it any bigger than we did or it would peel up along the sides. I would of loved to have them cut the full size of the screen, believe me! The screen is tapered on the right and left as well, so we couldn't of extended it that way either. If your looking for edge-to-edge protection you'll want to get an wet application screen protector, or the Nano from SGP which is an ultra thin PET film, but from my understanding even the Nano doesnt go all the way to the edge. I'm currently using the SGP FlexHD wet application screen protector on my GS 3 and it's pretty decent. I personally prefer PET but it's more important to me to have it go all the way to the edge so I'll settle for thermoplastic urethane on this device. I'm glad your happy with the quality of the screen protector though, we did switch to a Japanese based film which greatly increased our costs as they are 4x as expensive as the previous Korean PET film we were using. I think it's worth the added cost. I'm not sure how much longer we can continue to include them for free though. It doesn't make much sense that our Evo LTE case which doesn't include a screen protector is the same price as our GS III case which does. We'll probably increase the price of our cases that include a screen protector on our next major release by $1.00 to offset the added cost. Would you guys rather see us go back to the cheaper film and include the screen protectors for free, continue using the Japanese film and raise our prices by $1.00, or not include a screen protector at all and keep the prices where they are? Getting a Japanese based film screen protector for $1.00 more is a great deal in my opinion, SGP is charging $12.99 for their Japanese film, although you do get 2 of them for that price.
I really want to stress to you guys that these clear cases don't last as long as our black cases. I'm replacing mine about every 30-60 days because it either picks up blue dye from my pants or just becomes dirty. The matte finish makes it difficult to clean. If you are looking for longevity I'd go with black. If anyone's found a good way to clean them, and I'm sure there is some way to do it, please let me know!
Click to expand...
Click to collapse
As I use it more and more the screen protector is not noticeable unless evaluating the edges in direct bright light... It doesn't even bother me anymore. It is a much appreciated addition to the case.
I find it interesting that you are speaking against the clear case as it is your own product.... Hmmm. I have not had it long enough to evaluate dirt absorbtion yet. I will update the review as it gets dirty to show time frame and other thoughts over time.
Sent from my SPH-L710 using xda premium
OneStepAhead said:
From our product description:
Would you guys rather see us go back to the cheaper film and include the screen protectors for free, continue using the Japanese film and raise our prices by $1.00, or not include a screen protector at all and keep the prices where they are? !
Click to expand...
Click to collapse
Raise the prices by $1. People respect quality and will see the value added. Especially here on XDA.
Not include the screen protector for me.
I didn't see any other case worth buying around the $10 mark. What's another dollar for a better screen protector?
Order this case last night.
Thanks for the review.
I ordered this case yesterday. I'm going to be really disappointed if it only lasts me 60 days.
Anyone have pictures of this case on the pebble blue version?
Edit - Found pics in another thread: http://imgur.com/a/Mq9xX#UnaGs
Make it a dollar more if the screen protectors are good. I haven't gotten mine yet though.
i ordered a matte black on amazon the other day, but then i read one of the seller's comment about a pebble blue one coming in a couple of weeks, so i'll wait for that instead.
I love the screen protector that Samsung put on Galaxy Note 10.1.
It would be a prefect screen protector if I can remove the the imprints that they've eched on.
Does anyone know where I can get screen protector that's similar to the screen protector that Samsung put on the Galaxy Note 10.1?
I've bought some soft film screen protector and they're just aweful, swiping the stylus over it and you leave a track mark that doesn't go away.
Thanks.
John
Seems like this guys recommendation might be what your looking for. Can't vouch for it personally but given the claims it makes I might give it a try.
http://forum.xda-developers.com/showthread.php?t=1844143
Most of the clear dry install screen protectors would be fine for you.
I personally tend to use Photodon and if you are in the US I would recommend them. It sounds like you want a clear screen, not one that has a matte finish. If you order from them get the screen protector for the galaxy tab 2 10.1 and the "crystal clear" film MXA-5832-01
Crystal clear = http://www.photodon.com/p/MXA-5832-01.html
Matte anti-glare = http://www.photodon.com/p/MXH-5832-01.html
My personal preference is the matte finish because it hides fingerprints well and is easy to see when near direct light. It does degrade the screen quality slightly, but I'd rather that than having reflections. Personal preference really, ymmv.
Sent from my Galaxy Note 10.1
mouyo said:
I love the screen protector that Samsung put on Galaxy Note 10.1.
It would be a prefect screen protector if I can remove the the imprints that they've eched on.
Does anyone know where I can get screen protector that's similar to the screen protector that Samsung put on the Galaxy Note 10.1?
I've bought some soft film screen protector and they're just aweful, swiping the stylus over it and you leave a track mark that doesn't go away.
Thanks.
John
Click to expand...
Click to collapse
I got this one and love it. http://www.amazon.com/gp/product/B008R9FVUK/ref=oh_details_o01_s00_i00
It has a matte finish (no fingerprints or glare), so it may not be what you're looking for.
How does the pen with the default nib, slide with this covers?
There are thick, clear and provide a bit of paperlike drag to the pen.
http://www.amazon.com/GreatShield-S...&sr=8-8&keywords=greatshield+galaxy+note+10.1
3 for $10.
Hello all,
I am looking for some advice on the SPIGEN Screen Protector Steinheil (Ultra Fine or SQ Crystal Clear). My main concern is too keep the spen as precise as possible, as if im using it bareback. I have seen the Zagg Invis on some of my friends and tried it and I just dont like the drag, rubbery feeling and scratch like marks it leaves.
If it helps I do alot of art work and sketches, i just can't drag a Cintiq around.
Any thoughts would be great.
Thanks.
codeflight said:
Hello all,
I am looking for some advice on the SPIGEN Screen Protector Steinheil (Ultra Fine or SQ Crystal Clear). My main concern is too keep the spen as precise as possible, as if im using it bareback. I have seen the Zagg Invis on some of my friends and tried it and I just dont like the drag, rubbery feeling and scratch like marks it leaves.
If it helps I do alot of art work and sketches, i just can't drag a Cintiq around.
Any thoughts would be great.
Thanks.
Click to expand...
Click to collapse
I have the Spigen SPG Ultra Fine. The install was easy. I do screen installs in my bathroom with the shower on hot so that the humidity is up. It prevents dust from floating in the air.
The screen went on easily, smoothed out easily, and looks great. The smudge / finger print resistance is great so far and the pen works with no issue aside from the traces of what you wrote being left on the shield. It wipes off though.
But you can definitely see what I'd call a chalk-like outline on the screen after using the pen so regularly cleaning will be necessary with this shield.
I have a ultra fine on my n7k and its nice. Held up good so far 8 months down the road. .
Sent from my GT-N7000 using Tapatalk 2
it's definitely less rubbery than Zagg, if you don't like any drag, change your wacom pen nib to the pure white one. It's dam smooth with it.
The ultra fine isnt even close to zagg in the way it feels....
Sent from my GT-N7000 using Tapatalk 2
tokendog said:
I have the Spigen SPG Ultra Fine. The install was easy. I do screen installs in my bathroom with the shower on hot so that the humidity is up. It prevents dust from floating in the air.
The screen went on easily, smoothed out easily, and looks great. The smudge / finger print resistance is great so far and the pen works with no issue aside from the traces of what you wrote being left on the shield. It wipes off though.
But you can definitely see what I'd call a chalk-like outline on the screen after using the pen so regularly cleaning will be necessary with this shield.
Click to expand...
Click to collapse
As meticulous as I am, I made all precautions for adhering the Spigen Clear protector. Cleaned my surroundings in the bathroom, washed my hands, Steamed the room with fogged mirrors, and closed door and STILL static and dust particles!! The more I tried, the more dust there was! I gave up about a half hour later with about 30 dust particles under the protector. Plus, those small adhesive strips they provide to a terrible job in removing dust from the back side of the protector. Years ago, I bought a Boxwave protector for my GF's Sony Clie TH55. Obviously a smaller screen, but no problem what so ever and NO precautions necessary. $22 down the drain which is too much for a piece acetate with adhesive. Probably cost pennies to make. The printing and assembly of the product box probably cost more.
For big screens like this one, you guys should get wet apply protectors.
I got Xtremeguardz, and they're amazing. No dust, and I switched the pen tip to one of the plastic one so there's no residue and it flows smoothly.
Sent from my SGH-T989 using Tapatalk 2
theking_13 said:
For big screens like this one, you guys should get wet apply protectors.
I got Xtremeguardz, and they're amazing. No dust, and I switched the pen tip to one of the plastic one so there's no residue and it flows smoothly.
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, if Spigen sends out an other one free of charge, then I'll take further precautions like wearing a hazmat suite IN the shower.
Just an update:
I went ahead and purchased the Ultra Crystal and the Ultra Fine. Both were very easy to apply I just followed this video on youtube. Since I cant post links just search this in youtube "Installation And Review Of Steinheil Screen Protector Galaxy Tab 10.1".
I applied the Ultra Fine on a Galaxy Tab and the Ultra Crystal on my Galaxy Note 10.1 both with ease.
To follow up the results of my original question about possible spen scratch marks.
Ultra Crystal: The black nib left no signs of scratch marks, though there was slight resistance.
Ultra Crystal: The white nib felt smooth and similar to bareback. But when I turned off the Note, I noticed marks everywhere. I tried to wipe it off and had no luck. Dissapointed at this point I tried to do more research on my desktop to find another screen protector. Approximately 30 minutes later I come back to my Note and lo' and behold the spen scratch marks were gone. I don't know if the protector has some self healing property but it is certainly different from the Zagg I have seen on my friends were the marks stayed.
As for fingerprints, the Ultra Crystal does pick up prints, were the Ultra Fine does not.
Codeflight, what's the quality of the ultra fine one like? I believe it is anti-glare or matte, so does it pixellate the screen or make it harder to read in any way? Must you turn up the brightness to compensate?
I got the ultra-fine (matte) a couple days ago and I'm pretty happy with it. I found the solid white plastic s-pen tip works much better than the black tip, and I've yet to notice any marks or scratches after a couple days of solid note taking. Like any matte screen protector, it diminishes the sharpness of the screen somewhat and requires a slight bump in brightness to compensate, but I read a lot of pdfs and the reduction in glare is worth it to me. I haven't noticed any pixelation or grain effect.
holgalee said:
Codeflight, what's the quality of the ultra fine one like? I believe it is anti-glare or matte, so does it pixellate the screen or make it harder to read in any way? Must you turn up the brightness to compensate?
Click to expand...
Click to collapse
Beetmonger has already posted, I have had similar experiences with the Ultra Fine, so in addition to your question about brightness, Yes I do have to turn up brightness a couple of notches.
codeflight said:
Just an update:
I went ahead and purchased the Ultra Crystal and the Ultra Fine. Both were very easy to apply I just followed this video on youtube. Since I cant post links just search this in youtube "Installation And Review Of Steinheil Screen Protector Galaxy Tab 10.1".
I applied the Ultra Fine on a Galaxy Tab and the Ultra Crystal on my Galaxy Note 10.1 both with ease.
To follow up the results of my original question about possible spen scratch marks.
Ultra Crystal: The black nib left no signs of scratch marks, though there was slight resistance.
Ultra Crystal: The white nib felt smooth and similar to bareback. But when I turned off the Note, I noticed marks everywhere. I tried to wipe it off and had no luck. Dissapointed at this point I tried to do more research on my desktop to find another screen protector. Approximately 30 minutes later I come back to my Note and lo' and behold the spen scratch marks were gone. I don't know if the protector has some self healing property but it is certainly different from the Zagg I have seen on my friends were the marks stayed.
As for fingerprints, the Ultra Crystal does pick up prints, were the Ultra Fine does not.
Click to expand...
Click to collapse
one review I read says there is no hole for the sensor?
wyou2 said:
one review I read says there is no hole for the sensor?
Click to expand...
Click to collapse
Yes. I can confirm that.
Using ultra crystal. Slightly more rubbery but love it after i change to the white pen nib.
One of the good screen protectors is the clearplex protector. Check it out here: http://clearplex.myshopify.com/coll...r-shield-guard-protector-skin-cover-case-note
thanks for the post kenny but the OP is asking specifically about the spigen. That clearplex is already in the "what is the best protector" thread.no need to hijack this one.
Does the ultra fine affects the sensor, since there is no hole for it?
Sigh. I think I'm just too sensitive. I found the Ultra Fine unbearably scratchy. I just installed the Crystal and it still feels pretty different from the bare screen. It's definitely rubbery, and whenever my stylus catches any dust particle it feels like I'm scratching sand onto the screen. Plus sometimes it even squeaks! Maybe I just can't have a protector if I'm using a stylus. I'm waiting for a Just Like Glass protector for my new Nexus 7, and if the stylus works on it I might just try one for the Note.
Sent from my GT-N8013 using Tapatalk 2
Update: 12/16/12
Been using this for 3 days and I'm very satisfied with it:
How it feels - It feels like touching a regular paper but smoother.
Spen tip - White tip
Big improvement: I can put my palm on the screen without zooming in on the note, I guess my palm slides a little on the glass surface causing it to zoom.
Screen doesn't look as dirty because of the finger prints.
Can read longer because the screen isn't too bright and glare is greatly reduced.
Overall I like it because it feels like writing on a paper rather than glass. I'm not really a fan of writing on glass and since I was little I've been writing on paper ^_^v
Original post:
Well I finally got my Ultra Fine and all I can say is wow. I had moko screen protector before and I've felt it restrict my fingers from doing swipes and forget about the spen. I took that moko screen off my note after 30 minutes from installation. The end result with any screen protector is subjective, but I do urge you guys to try Ultra Fine.
Install: Easy if you follow the directions. Orient your note "portrait" so the camera/sensor would be on your left side and the charging port will be on your right. clean with provided solution and towel. Peel off about 1~2 inches. Align it close to the edge from top and peel halfway let the screen protector adhere it self. double check for any dust particle then proceed installing to the rest of the tablet. Squeeze out the bubbles and check for dust particles. I had 1 dust particle and used the supplied tape to lift the edge and another tape to get the dust. So let me say it again. only peel off the backing halfway to reduce dust particle from getting between the screen and protector.
Spen - use the white tip and don't need to press to hard to write ^_^ it feels good writing.
Brightness compensation - Very Subjective. I like mine with cool feeling so that means dimmer.
Fingerprints - Reduced greatly.
I'll update with images.
The Ultra Fine sound amazing for stylus/art use; But how lacking is the visual quality of watching movies on netflix and such? I heard the brightness/sharpness is slightly degraded. I was wondering if you'd even notice after maxing out the the brightness? I don't normally do screens but this tablet is so awesome. Want to keep it that way.
The courier delivered a tempered glass type protector from China this morning and I have some spare time to install it in the afternoon. This protector is actually a sample from the manufacturer and I have rejected several of them previously due to the poor placement of cutouts. I did not even bother installing them coz the cutouts were just so so misaligned and I doubt if they are for P600 while I am having a P605 (This is the reason the manufacturer gave although I wonder if the button placement are THAT different between P600 and P605).
This one should be the third one and it is reasonably fit for my P605. It doesn't have any indication on its thinkness and by the look of it I guess it's the common 0.05mm type.
In Short:
Pros:
- The protector is WAY*100 better than the traditional clear plastic protector I had on the P605.
- It's clear (oops... ). Crystal CLEAR!
- VERY smooth to write on with the S-Pen (NO more dragging by the plastic protector) This is the MOST important point! I can live with those traditional plastic screen protectors on phones / pads with no pens but with S-Pen I need a MUCH better writing experience. This is DEFINITELY a personal preference coz I am a fountain pen lover and has always been VERY demanding on writing surfaces.
- The edges of the protector and around area around the cutouts are smooth (but not those tapering curved ones as the one I have on my Note 3).
- I guess one does not need to worry about this protector in fear that it will scratch the screen if it is smashed coz I smashed the one on my Note 2 but it had caused absolutely no harm to the screen.
Cons:
- Obviously, expensive. Way more expensive than those plastic one yet it lasts longer.
- And there aren't too many manufacturers making tempered glass protector for P605. I guess may be the Note 10.1 2014 just isn't popular enough YET. The market is flooded with tempered glass protector for IPAD and Note III but not for P600/P605.
- Not AS resistant to scratches as you may think. The one on my Note III was scratched after three days and I still did not know why (Not with keys or sharp objects in the pocket but it was scratched). Er...a mystery huh.
- Not compatible with some cases.... especially those bumpers. I use a metal bumper on my Note III and it can't be "assembled" (The slot-type) due to the added thickness of the protector. On Note 10.1 2014, I use the original book case so NO problem so far. I would love to have a metallic bumper for my P605 tho. Still yet to find one.
- You can feel the WEIGHT of it. It adds a bit weight to the already-quite-heavy tablet .
- May be a bit difficult to install but I can say it's FAR FAR easier than installing the plastic one. Just do it slowly... don't rush it... then... OK!
The Installation and my experience with it
The installation is about the same as the way we install the plastic one tho it's a lot easier. There is a trick: peel the 1st layer (marked with a label) of the non-sticky film diagonally half way down and careful align the cutouts with the Home button and the sensors. After aligning them, pull the remaining half away from the corner underneath
and SLOWLY.... REMEMBER SLOWLY and SOFTLY put little pressure on it at the center. This will stick the protector onto the screen while not too strong that you can still move the protector around with your nails by pushing it on the sides. After inspecting closely that there is no dust and the alignment is perfect, just apply little force smoothly across the surface and peel off the blue film on the surface of the protector then ..........YEAH... your screen is now very well protected!
After playing it for about two hours now, what I like most is the smoothness when writing on it. Definitely unbeatable on this. I use the Samsung S-Pen Holder Kit on it and it turns writing and drawing on P605 even more enjoyable. I enjoy sketching on it.
Reflection may be a problem when reading... em...but I like the crystal clear screen a lot more now.
My Verdict on P605's accessories:
Emm... It is one of the best accessories I have bought so far for my P605.... I recommend getting a tempered glass protector and the Samsung S-Pen holder kit to my friends.
The original book cover is a short term solution until there are more options on the market (hope there will be)
I will DIY a leather case anyway during the holiday anyway
Photos of the protector are attached. You can see the edges of it are still 2-3mm away from the rim of the tablet. Macro photos showing the cut outs too.
** Update: The protector claims to have an Oleophobic coating yet it stills attract fingerprint quite easily. A gentle swipe with a clean cloth can clean it.
Mind sharing the link to buy this screen protector ?
Thanks
Sent from my SM-P605 using xda app-developers app
Sorry.. this one is not from an online store. It's a sample for my shop.
Nillkin Mi A1 accessories small review
After 1 week my Mi A1 accessories finally arrived!
A few add-ons to my Mi A1: Nillkin Amazing H+ tempered glass screen protector, Nillkin USB Type-C 5V/2A charging and data cable, Nillkin Mi 5x/A1 Frosted Shield case (Black). Price stated as off 10/28/2017, (on discount)
EDIT (Nov 1): Added Nillkin Amazing H tempered glass screen protector
EDIT (Dec 16): Re-applied Nillkin Amazing H+ Pro tempered glass screen protector
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First, start off with the screen protector:
Nillkin Amazing H+ tempered glass screen protector ~$6 USD
Recommended if you are highly skilled, you need to be highly skilled to apply the screen protector perfectly and no mistakes. Because once you get air bubbles underneath the screen protector, it's nearly impossible to get it out. Plus if you remove and reapply, you will pretty much get permanent bubbles at the corner. Once you lift it up even with little force, the adhesive is pretty much destroyed. Other than those cons I will think it's an okay screen protector, if you can get it on spot the first time without air bubbles.
It's coated with oleophobic coating, so you will probably get less fingerprint on your screen, it's thin with 0.2mm thickness (can flex slightly more without breaking it comparing to conventional screen protector).
Conclusion: It's an excellent screen protector if you can apply it in one go perfect alignment, no dust etc. Otherwise if you are a newbie (like me) it's definitely not for you, look for other screen protector or ask someone who is great at installing screen protector apply it for you. But for the price, I can't complain. I will get another thicker one (0.3mm) in few days time as I don't like imperfect applications.
Tips: Do not take out the screen protector until you are ready to apply it. Use all the accessories Nillkin provided before applying the screen protector, clean your screen with wet & dry wipes first, and then use the anti-static film to remove remaining dust on the screen. Your screen shouldn't pick up any dust for 2-3 mins unless you are in a very dusty place. When you finally ready to install the screen protector, remove it from the protective film case and then apply it on your screen. Don't peel off the adhesive protection film altogether at start, instead pull 30% off and then try align to your screen properly, once confirmed then only peel it off completely. If you have bubbles on the side, just keep pressure on it for around 1-2 mins and they will be gone.
2nd screen protector:
Nillkin Amazing H tempered glass screen protector ~$5 USD
Highly recommended, this one the original Amazing H screen protector is much more better than the H+ screen protector. It doesn't have the slight color fade after applying compared to the H+ version. Although it is slightly thicker (0.3mm) and doesn't curve like the H+ at the edges, I still recommend this one over the H+, and check it out! No halo effect, rainbow effect, ring of light effect nonsense.
Just get this one if your just an average user and needs some basic protection (of course this one also have oleophobic coating), this one will do the job perfectly, and it's cheaper too.
USB cable:
Nillkin USB Type-C 5V/2A charging and data cable ~$3
Recommended, supports 5V and 2A charging which our phone supports, supports data connectivity too. You can wrap it up if you don't need to excessive length of it. The Type A connector are also reversible, which is a plus.
For some reason I felt that the cable quality is not that great compared to my 2 years old Nillkin Micro-USB cable, seems like they have cut cost in order to sell it at cheaper price. But it does the job perfectly.
Conclusion: If you are not looking for fancy cables and just want a flat and cheap cable, this one is definitely for you.
Case:
Nillkin Mi 5x/A1 Frosted Shield case ~$5.50
Highly recommended. I always bought Nillkin case, although it doesn't cover the upper and bottom part of your phone. It looks really slick and provide very comfortable grip for you. Note that the cover only give very minor buffer between your screen and surface if you put your phone upside down. Adding any tempered glass will definitely cause it higher than the case. Although it only gives basic protection, but it doesn't look that bulky compared to those TPU case.
I always love Nillkin case, they made very good cases for each phone, and their quality is very good too. (Although I got face some crack in old case before, but it's rare)
Conclusion: If you are looking for a case that won't make your phone looks bulky and add some grip, this case will probably suits you. But take note that only gives basic protection, any drops will be bad.
It's covered flashlight ?
Mad4Red said:
It's covered flashlight ?
Click to expand...
Click to collapse
What you mean by covered flashlight? The case doesn't cover the flashlight, it cut very precisely on the camera lens and flashlight, nothing get covered.
soralz said:
What you mean by covered flashlight? The case doesn't cover the flashlight, it cut very precisely on the camera lens and flashlight, nothing get covered.
Click to expand...
Click to collapse
Ok. On photo it's looks like half of flash lite is covered.
Mad4Red said:
Ok. On photo it's looks like half of flash lite is covered.
Click to expand...
Click to collapse
Oh. Don't worry nothing gets covered.
is it hard case? can you show me inside material? is it rubber?
Trace you from lowyat forum. Thumb up for all the details description and image taken. jz bought the device n waiting for shipping, Hope to see you come up with more sharing regarding this device in term of software and apps optimization.
jinshah said:
is it hard case? can you show me inside material? is it rubber?
Click to expand...
Click to collapse
Not really rubber, it's kinda like hard plastic with slightly coated with rubber material
keithkeat19 said:
Trace you from lowyat forum. Thumb up for all the details description and image taken. jz bought the device n waiting for shipping, Hope to see you come up with more sharing regarding this device in term of software and apps optimization.
Click to expand...
Click to collapse
No problem bro, hope you like the case :highfive:
Hard time applying the screen protector.The second step where you have to peel off the 2nd sticker didn't go as planned lol.Ad to use a tape to peel it off.
The cover is pretty good too.But any falls can make a damage..Waiting for the Temper to arrive now!
<mod edit: commercial spam>
Flosmall.com said:
Hello, friend. After I see the Nillkin screen protector on A1, I have some doubts, as the edge part is a little cracked from the photo. I don't know why this. As Nillkin is a good quality phone accessory brand. If the Nillkin screen protectors can be 2 pcs pack, then it is better. As if you are a newbie, and you broke the first A1 screen protector by careless, you can try the second one.
As we are the seller, so we sincerely invite any people who are interested in our Xiaomi A1 screen protector kit for free. 10 candidates are needed and no money at all. Just the real feedback to prove our customer values. If you are interested, you can contact us at [email protected] , emails are replied within 1 working day.
Why we choose this kind of screen protector for Xiaomi Mi A1? As we know, currently a lot of phones are made based on curved screen. It is a challenge for screen protector manufacturers. If the screen is flat, who does not like transparent full screen coverage protector? But now it is a curved screen phones era. While glasses cannot bend. So 2 solutions to solve this problem.
1. Transparent screen protector with curved edge not covered
Disadvantage: The screen protector is smaller than Xiaomi Mi A1 whole screen and it can only cover the flat part and left the curved edge not covered. Anyhow, if you have a protective case which can hold the A1 front space by little, it can be a good makeup for this issue. Besides, it is not that easy to install as you need to align the screen protector with the phone flat screen by eyes. You need a screen protection applicator, the screen applicator makes perfect alignment for Xiaomi Mi A1 and screen protector. Cleaning cloth and sticky dust remover makes bubble and dust free application.
Advantages: High transparency and good touch compatible. As there is full glue under the whole screen part, it will keep the touch sensitivity.
2. Full screen protection protector for Xiaomi A1 Kit
Disadvantages: This full screen protection protector is with glue on the edge only. In the middle there is no glue. So it will make the screen less sensitivity for some flaw screen protectors. The flaw rate is about 1%.
Advantages: It is full screen protectors so you will not see white edge at all. And flosmall put a TPU transparent case for Xiaomi A1. Besides there is a lanyard so you can carry the phone anywhere you want.
Click to expand...
Click to collapse
You got my attention. Can you provide me to try this product?
Sent from my Mi A1 using XDA Labs
Free Trial Of Xiaomi Mi A1 Screen Protector Kit From Flosmall
heehaa123 said:
You got my attention. Can you provide me to try this product?
Sent from my Mi A1 using XDA Labs
Click to expand...
Click to collapse
Hello friend. thanks for your interests in our products! Sure we can have a try on this product! Can you send us email at [email protected] and tell some information about yourself? Like your country for example.
Flosmall.com said:
Hello, friend. After I see the Nillkin screen protector on A1, I have some doubts, as the edge part is a little cracked from the photo. I don't know why this. As Nillkin is a good quality phone accessory brand. If the Nillkin screen protectors can be 2 pcs pack, then it is better. As if you are a newbie, and you broke the first A1 screen protector by careless, you can try the second one.
As we are the seller, so we sincerely invite any people who are interested in our Xiaomi A1 screen protector kit for free. 10 candidates are needed and no money at all. Just the real feedback to prove our customer values. If you are interested, you can contact us at [email protected] , emails are replied within 1 working day.
Why we choose this kind of screen protector for Xiaomi Mi A1? As we know, currently a lot of phones are made based on curved screen. It is a challenge for screen protector manufacturers. If the screen is flat, who does not like transparent full screen coverage protector? But now it is a curved screen phones era. While glasses cannot bend. So 2 solutions to solve this problem.
1. Transparent screen protector with curved edge not covered
Disadvantage: The screen protector is smaller than Xiaomi Mi A1 whole screen and it can only cover the flat part and left the curved edge not covered. Anyhow, if you have a protective case which can hold the A1 front space by little, it can be a good makeup for this issue. Besides, it is not that easy to install as you need to align the screen protector with the phone flat screen by eyes. You need a screen protection applicator, the screen applicator makes perfect alignment for Xiaomi Mi A1 and screen protector. Cleaning cloth and sticky dust remover makes bubble and dust free application.
Advantages: High transparency and good touch compatible. As there is full glue under the whole screen part, it will keep the touch sensitivity.
2. Full screen protection protector for Xiaomi A1 Kit
Disadvantages: This full screen protection protector is with glue on the edge only. In the middle there is no glue. So it will make the screen less sensitivity for some flaw screen protectors. The flaw rate is about 1%.
Advantages: It is full screen protectors so you will not see white edge at all. And flosmall put a TPU transparent case for Xiaomi A1. Besides there is a lanyard so you can carry the phone anywhere you want.
Click to expand...
Click to collapse
would love to join if u want to post it here
Dr Grato said:
would love to join if u want to post it here
Click to expand...
Click to collapse
Hello friend. If you are interested in our free trial, please write to [email protected] and tell your country information also.
Nillkin H+ is rubbish, avoid. Does not contact from screen protector edge 1mm inside left and right edges. Somehow have a huge scratch already after only 2 days of application
Official Mi case
Official Mi case looks way more trendier!
Any opinions about the screen protector that comes with the nillkin frosted case?
mparmpas122321 said:
Any opinions about the screen protector that comes with the nillkin frosted case?
Click to expand...
Click to collapse
If you don't mind it will get scratched from day 1 then I'd say it's doing pretty good at protecting your screen. Plus it won't have those Halo / Rainbow effect etc. kinds of problems.
My friend i want to ask you if the coverage area of the screen is the same between Nillkin Amazing H and Nillkin Amazing H+ Pro?
konstantinos77 said:
My friend i want to ask you if the coverage area of the screen is the same between Nillkin Amazing H and Nillkin Amazing H+ Pro?
Click to expand...
Click to collapse
Same, just thickness difference and Amazing H+ Pro is thinner and slightly curved at the edges.