Hello everybody
To begin my announce, i wish to scuse if you will have difficulties to understand some phrases I'm trying to explain, I'm french and I've don't practice English since 5 or 6 years, so... sorry in advance.
Let me you explain :
Yesterday, I was under ARHD 15 onto my One X and I've tried to put CM10.
So, with fastboot mode : I've erased cache, flashed the boot.img situated into the CM archive, and re-erased the cache.
After that, I've gone into the Recovery mode and I've tried to flash the rom and the gapps archive. I've wipe cache/factory reset and wipe dalvik cache.
But when I've tried to reboot One X, I can't access to the rom, it stays "frozzen" onto HTC Quietly brilliant screen.
I've tried also to flash EPRJROM ENEDEAVORUCM10_0.15 after to have flash his boot.img into fastboot mode
My infos in Recovery Mode:
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.31.0000
CPLD-None
MICROP-None
RADIO-5.1204.162.29
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW Secure Boot : Enabled
Modem Path : off
Oct 18 2012,20:49:20
Can someone help me, please... ? I spent 4 hours to understand what the f*** but without to find a solution
A big thank to people who can help me to have my phone working before tomorrow
So did u do a factory reset after flashing the rom ?
MarcelHofs said:
So did u do a factory reset after flashing the rom ?
Click to expand...
Click to collapse
Yes, I did it. I'ts written into my announce
Since you are on hboot 1.31, you can't use the boot.img inside the zip. You have to download the one towards the bottom of op for official cm10 thread. It's modified by mdeejay for new hboots. Flash that boot.img. A reminder gps doesn't work in modified boot.img
rerem8433 said:
Yes, I did it. I'ts written into my announce
Click to expand...
Click to collapse
Don't do it after flashing the new rom only before !
Very sorry for delay, I've worked all the day.
So : I've found the boot.img modified by mdeejay but I've tried during 4 hours to run the script which allows to charge battery when it's under 3.68V. But I feel that battery won't up to 3694, I feel that battery can charge anymore.
So, I don't know what to do. I've tried to flash with "All in One HTC Kit by Hasoon'2000" the boot.img or the CWM to enter into recovery (to charge fully my battery) but when I try to acess into recovery by bootloader, I can see the menu screen but only during 0.5 seconds.
I'm lost. What should I do that I've forgot... ?
I'm sorry for fr-english but I try to don't use reverso.net or google translate because of translations are too "word to word"... :/
A big thank to all members who read what I'm writing
Try the "fastboot erase cache" command from your pc first. Then, enter he following command
Fastboot reboot-bootloader
From there, try entering the cwm recovery
eyosen said:
Try the "fastboot erase cache" command from your pc first. Then, enter he following command
Fastboot reboot-bootloader
From there, try entering the cwm recovery
Click to expand...
Click to collapse
Thanks man,
I'ts okay, I can access to recovery now
One question before askkin an another one : HTC charge the battery when I'm under CWM ?
So, others questions :
I've done a erase cache, a flash of new boot.img, a second erase cache. I've enter in recovery mod, make on USS storage mass for put the last CM10 nightly. Do I put the new boot.img that I flashed just before with JBFWTOOL14 into the last nightly instead of the boot.img present in the archive ?
If you flashed cwm recovery 5.8.4.0 then yes it charges.
As for second question, reboot to recovery AFTER you copy rom to sdcard in recovery. Otherwise, you may not access sdcard in recovery.
---------- Post added at 08:11 PM ---------- Previous post was at 08:10 PM ----------
Your welcome
---------- Post added at 08:13 PM ---------- Previous post was at 08:11 PM ----------
No need for the tool. You already flashed the boot.img. Since the one in rom.zip won't get flashed due to s-on, you don't need to include it in zip file.
[/COLOR]No need for the tool. You already flashed the boot.img. Since the one in rom.zip won't get flashed due to s-on, you don't need to include it in zip file.[/QUOTE]
Really, it's very pleasant to see how members help other members into this forum, I've never seen it before. A big thank to you.
buuuuuttttt lool I've done everything you've advised me and... it boots and freeze on HTC quietly brilliant
Whhyy ? What's going on ?
To resume all that I've done since I've this problem :
I've erased cache, flash boot.img took on mdeejay site, re erase cache. Reboot the bootloader, go into CWM after flashed it, have put on internal SD the last nightly, 've flashed that, have reboot and arrive again and again on this screen of HTC. It boot again and again when he arrives on HTC screen...
I've forgot something... ?
I need to flash a kernel like Syrius to resolve this problem ? Why this screen ?
Don't forget that before, I was onto ARHD 15, soooooo maybe I've flashed something wrong which don't let me flash correctly CM10 ?
Big thanks to you
The only thing I can think of is this:
1 go to cwm, factory wipe, then go to mounts and storage in cwm, then format /system, /data and /cache
2 flash the latest CM10 nightly first in cwm.
3 reboot bootloader and go to fastboot.
4 use "fastboot flash boot boot.img" command and "fastboot erase cache" command in this order. Use mdeejay's modified boot.img for flashing.
5 now reboot phone
It should work.
---------- Post added at 09:02 PM ---------- Previous post was at 08:57 PM ----------
Before you do any of this, make sure you charge the phone fully.
eyosen said:
The only thing I can think of is this:
1 go to cwm, factory wipe, then go to mounts and storage in cwm, then format /system, /data and /cache
2 flash the latest CM10 nightly first in cwm.
3 reboot bootloader and go to fastboot.
4 use "fastboot flash boot boot.img" command and "fastboot erase cache" command in this order. Use mdeejay's modified boot.img for flashing.
5 now reboot phone
It should work.
Okay, I did it... annnnddddd... again the HTC Screen It's not possible to have try 100 000 methods and boot again and again on this screen, no ?
Click to expand...
Click to collapse
Can you try an older nightly? Like Oct 29th. If that fails, try repacking the latest nightly kernel with mdeejay's ramdisk using an online repacker, such as nibble.cc
rerem8433 said:
eyosen said:
The only thing I can think of is this:
1 go to cwm, factory wipe, then go to mounts and storage in cwm, then format /system, /data and /cache
2 flash the latest CM10 nightly first in cwm.
3 reboot bootloader and go to fastboot.
4 use "fastboot flash boot boot.img" command and "fastboot erase cache" command in this order. Use mdeejay's modified boot.img for flashing.
5 now reboot phone
It should work.
Okay, I did it... annnnddddd... again the HTC Screen It's not possible to have try 100 000 methods and boot again and again on this screen, no ?
Click to expand...
Click to collapse
YYeeeeeeeeeeaaaaaaaahhhhhhhhhhh i'ts goooddd
I've tried with the tool this time I've mentionned before and the phone root normally, I'm under CM10.
How to say : A BIIIIIIIIIIIGGGGGGGGGGGG THHAAANNNKS (I know : I shout but I'me really happy )
Click to expand...
Click to collapse
Nwm. Great news. Now I can go to bed.
eyosen said:
Nwm. Great news. Now I can go to bed.
Click to expand...
Click to collapse
I wish you a very good night my friend
hello
just flash a new ROM and do a factory reset and then flash the Rom you want again .. it works great :good:
Related
I've tried lots and lots of things for hours now and I've still been stuck in the boot screen of htc for the past 4 hours. And yes, I've googled so much and tried all solutions that people have had, and it's still not working.
I have tried wiping, installing ROM, go into recovery, fastboot flash boot boot.img, reboot and it hasn't worked for me.
I've tried both TWRP and CWM to install my ROM. I have a backup in TWRP that I did before it derped, but it doesn't turn my phone into working state again.
The ROM I'm trying to activate is the Cyanogen Mod 10.1 from the weekly link.
Only once I managed to get the Cyanogen boot screen (it got stuck there too), but after flashing my boot.img it disappeared. I tried updating my hboot with something I downloaded.
What have I done wrong? After reading all those threads, I'm totally clueless.
What is your hboot number ?
Mr Hofs said:
What is your hboot number ?
Click to expand...
Click to collapse
HBOOT-1.39.0000
Also its S-ON, but after googling I think everyone's One X is S-ON.
Oke do this
If you have cwm 5.8.4.0 (otherwise flash it to follow these steps)
Enter the recovery and perform a full wipe
Data/factory reset
Wipe cache partition
Mounts and storage-format cache,data,system
Advanced-wipe dalvik cache
install the CM10.1.zip (do not reboot after)
install gapps (do not reboot after)
Then type in the fastboot window :
Adb reboot bootloader
Flash the boot.img file from the rom
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot !
Fingers crossed
Mr Hofs said:
Oke do this
If you have cwm 5.8.4.0 (otherwise flash it to follow these steps)
Enter the recovery and perform a full wipe
Data/factory reset
Wipe cache partition
Mounts and storage-format cache,data,system
Advanced-wipe dalvik cache
install the CM10.1.zip (do not reboot after)
install gapps (do not reboot after)
Then type in the fastboot window :
Adb reboot bootloader
Flash the boot.img file from the rom
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot !
Fingers crossed
Click to expand...
Click to collapse
I followed your steps so precisely... but it didn't work Also I think I've done something close to this process before and had no success.
What you did differently though, I never installed gapps, and I didn't know that you can wipe dalvik cache in CWM.
What I had to do during your method though was go into mount SD storage and insert a fresh copy of both the gapps and CM10.1.
If you need any more information I'd gladly provide them as quick as possible, I'll be refreshing this thread constantly
Try my steps again but this time use a completely different rom. Try a standard sense base rom. Just to check if its booting ! Ow and you can leave the step for gapps away. And you can choose to do the boot.img thing first and then the recovery part.
This one maybe
http://forum.xda-developers.com/showthread.php?t=2063556
If it does not boot up we are missing something somewhere ... You are actually flashing the boot.img from the rom correctly ....also flash the boot.img from the rom .... Its inside the rom.zip
Mr Hofs said:
Try my steps again but this time use a completely different rom. Try a standard sense base rom. Just to check if its booting ! Ow and you can leave the step for gapps away. And you can choose to do the boot.img thing first and then the recovery part.
This one maybe
http://forum.xda-developers.com/showthread.php?t=2063556
If it does not boot up we are missing something somewhere ... You are actually flashing the boot.img from the rom correctly ....also flash the boot.img from the rom .... Its inside the rom.zip
Click to expand...
Click to collapse
I downloaded ViperX_2.6.0 instead (http://forum.xda-developers.com/showthread.php?t=1745176), since it was pretty much done right before you added the suggestion. The guide there tells me to flash the boot first then install the rom, but I did the rom first. IT WORKED! Thought it was stuck in the bootscreen again haha. I got to the unlock screen, but after unlocking all I saw was the HTC symbol. I then held the power button and pressed restart. Same thing after restart. After unlocking, all I see is a white screen with the HTC symbol in the middle. Can only lock the phone :/ Is it me or the ROM?
Or the phone ! Strange ..... But you must flash a JB rom to check if your bootloader supports it. The viper x 2.6 is an old ics one and runs on any hboot.
Actually is doesn't matter what you do first ..... It works both ways.
Test the bugX Rom. Flash the boot.img that is inside the bugX.zip copy it out to the fastboot folder and flash it directly from there. Make sure to full wipe again and install the rom .....I don't know what else....doing it like this for months and never failed.
Mr Hofs said:
Or the phone ! Strange ..... But you must flash a JB rom to check if your bootloader supports it. The viper x 2.6 is an old ics one and runs on any hboot.
Click to expand...
Click to collapse
Nevermind it worked after waiting a long time! The ROM works! Thanks!
But now, how do I go and fix CM10.1? I'm thinking I might have downloaded the wrong CM10.1 file since it was only 171MB and this ROM is around the 600MB range.
YOke now test a true JB rom. Read my post above to check the hboot !
And CM10.1 is that small. I don't know why it does not work ! Installed it this week on somebody else's phone just like i described here .....
CM10.1 ROM
http://d-h.st/Sgu
GAPPS
http://goo.im/gapps/gapps-jb-20121212-signed.zip
BOOT.IMG
http://d-h.st/Q2Y
Mr Hofs said:
YOke now test a true JB rom. Read my post above to check the hboot !
And CM10.1 is that small. I don't know why it does not work ! Installed it this week on somebody else's phone just like i described here .....
CM10.1 ROM
http://d-h.st/Sgu
GAPPS
http://goo.im/gapps/gapps-jb-20121212-signed.zip
BOOT.IMG
http://d-h.st/Q2Y
Click to expand...
Click to collapse
Alright I was gonna try the bugX ROM to test out if JB Roms worked, but I'll try CM10.1 once again using only the links you posted above. Will report back!
EDIT: IT WORKED! IT TOOK 6 HOURS BUT IT WORKED! Oh my god thank you SO MUCH! I have no idea what I did wrong though!
It might be the choice of CM10.1 type, or something. I just used your first method with your files and it just worked instantly!
Once again, thank you so much for bearing with me for so long haha.
I have a proble...
I tried to instal viper 3.3.7 rom and I failed it stuck on htc screen. Than I tried to do my nandroid backup cm 10.1 b6 and the phone can not reed sd card. It behaves like it is not there. When I go to recovery there is that folder 0 and than i cut and paste all from that folder back to rot of the phone but even when I tried clean install of cm 10.1 b6 it did not stick. What Do I have to do to have everything working again.
Please help.
I have an extraordinary patience mate
Have fun with CM10.1 :thumbup:
hi all,
i need help getting back to stock rom please.
i have my stock online nandroid backup files tried to flash stock boot.img then proceeding to restore using TWRP 2.4.4 but it fails.
i tried paranoid android 3.10 last night and it looks great with my best feature "swipe to lock/unlock" , unfortunately no wifi , it just can not be turned on, tried another kernel "repacked xm"
and still no wifi and gsm signal,
now i flashed RC19 it is working great , only some issues with notification LED and camera/gallery stability , but i still want to know how to get back to stock.
any help will be appreciated.
Flash the boot.img file from the stock nandroid backup. Enter the recovery and perform a full wipe then restore the backup. Should get you back to stock rom.
Twrp has a different boot.img named boot.emmc.win .....flash it
Fastboot flash boot boot.emmc.win
Fastboot erase cache
Mr Hofs said:
Flash the boot.img file from the stock nandroid backup. Enter the recovery and perform a full wipe then restore the backup. Should get you back to stock rom.
Twrp has a different boot.img named boot.emmc.win .....flash it
Fastboot flash boot boot.emmc.win
Fastboot erase cache
Click to expand...
Click to collapse
thanks, i will try and get back
in the wipe menu i have many choices :
cache - delvik cache - factory reset - system - external storage - android secure
i usually do : cache - delvik cache - factory reset
do i need to do one of the other choices? and why?
I always do all of them except external storage . Just to be sure you have no complications ! There is nothing better then a good cleansweep
still not working, gives me Failed message
Do a fastboot command
Fastboot getvar version-main
Post the outcome please
3.16.415.4
Oke get yourself a new nandroid backup from here
http://forum.xda-developers.com/showthread.php?t=1975140
Its taken with clockworkmod recovery. So flash that first. Look for cwm 5.8.4.0 and flash it. You probably have no touch because of the 3.16 base you are on. Just use the volume and power button.
Download the nandroid and unpack it to the right folder
Clockworkmod\backup\time & date folder\backup files
Then wipe ALL of this
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Restore the nandroid backup and after that you open the command window on the pc and type
adb reboot bootloader (the phone goes from the recovery to the bootloader)
Flash the boot.img from the new nandroid
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
This should work fine.
thanks for your great support , one other thing i want to know , how to access the correct directory without having a working system on the device?
ok i managed to access it
Go in the recovery to mounts and storage and select : mount as mass storage device .....it pops up on the pc as a usb diskdrive
Mr Hofs said:
Oke get yourself a new nandroid backup from here
http://forum.xda-developers.com/showthread.php?t=1975140
Its taken with clockworkmod recovery. So flash that first. Look for cwm 5.8.4.0 and flash it. You probably have no touch because of the 3.16 base you are on. Just use the volume and power button.
Download the nandroid and unpack it to the right folder
Clockworkmod\backup\time & date folder\backup files
Then wipe ALL of this
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Restore the nandroid backup and after that you open the command window on the pc and type
adb reboot bootloader (the phone goes from the recovery to the bootloader)
Flash the boot.img from the new nandroid
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
This should work fine.
Click to expand...
Click to collapse
hi i have this problem i think. i installed the boot.img via fastboot then in recovery wiped everything then installed the rom and gapps and the wifi just wont turn on. i slide it across and it says turning wifi on but does nothing?
anandyaa98 said:
hi i have this problem i think. i installed the boot.img via fastboot then in recovery wiped everything then installed the rom and gapps and the wifi just wont turn on. i slide it across and it says turning wifi on but does nothing?
Click to expand...
Click to collapse
A nandroid backup NEVER comes together with a install of gapps. Don't know what you are trying to do ? A nandroid backup is restored including flashing the boot.img. that's all to it.
Mr Hofs said:
A nandroid backup NEVER comes together with a install of gapps. Don't know what you are trying to do ? A nandroid backup is restored including flashing the boot.img. that's all to it.
Click to expand...
Click to collapse
i mean i dont want to back up or go to any other rom i just want to fix whatever i have done. so right now ive installed paranoid android and gapps but wifi wont turn on. how do i fix this? sorry if i posted it in the wrong section just kinda panicking .
anandyaa98 said:
i mean i dont want to back up or go to any other rom i just want to fix whatever i have done. so right now ive installed paranoid android and gapps but wifi wont turn on. how do i fix this? sorry if i posted it in the wrong section just kinda panicking .
Click to expand...
Click to collapse
Don't know really ! If you did all you needed to do there should be no problem. What's your hboot number ?
Wipe ALL again. Flash the boot.img from the paranoid rom. Go to the recovery and install the rom.zip and gapps.zip.....then reboot. Otherwise try another rom
i think it is a kernel issue, that's why i tried to repack with xm kernel , but no use, so i flashed RC19.
Mr Hofs said:
Don't know really ! If you did all you needed to do there should be no problem. What's your hboot number ?
Wipe ALL again. Flash the boot.img from the paranoid rom. Go to the recovery and install the rom.zip and gapps.zip.....then reboot. Otherwise try another rom
Click to expand...
Click to collapse
i think its htc001. yeah its what i do for every rom. ive been off my htc for about 4 months so thought there was something to do with the different version of android jelly bean??? i used to be on ARHD18 which worked perfectly. i did what i said above and this happened. ive tried installing miui from ARHD18 and that failed aswell. it had no lockscreen and stuff generally didnt work.
---------- Post added at 12:41 AM ---------- Previous post was at 12:22 AM ----------
Mr Hofs said:
Don't know really ! If you did all you needed to do there should be no problem. What's your hboot number ?
Wipe ALL again. Flash the boot.img from the paranoid rom. Go to the recovery and install the rom.zip and gapps.zip.....then reboot. Otherwise try another rom
Click to expand...
Click to collapse
sorry thats my CID i think. its 1.31. ive seen a hboot on 1.36 should i upgrade to that and try again? does it require a special cwm?
Mr Hofs said:
Oke get yourself a new nandroid backup from here
http://forum.xda-developers.com/showthread.php?t=1975140
Its taken with clockworkmod recovery. So flash that first. Look for cwm 5.8.4.0 and flash it. You probably have no touch because of the 3.16 base you are on. Just use the volume and power button.
Download the nandroid and unpack it to the right folder
Clockworkmod\backup\time & date folder\backup files
Then wipe ALL of this
Factory reset
Wipe cache partition
Advanced - wipe dalvik cache
Mounts & storage - format cache, data, system
Restore the nandroid backup and after that you open the command window on the pc and type
adb reboot bootloader (the phone goes from the recovery to the bootloader)
Flash the boot.img from the new nandroid
Fastboot erase cache
Fastboot flash boot boot.img
Fastboot erase cache
Fastboot reboot
This should work fine.
Click to expand...
Click to collapse
DONE , thanks alot Mr Hofs for your help and knowledge you share with us, i am learning alot from you , appreciate your time
anandyaa98 said:
i think its htc001. yeah its what i do for every rom. ive been off my htc for about 4 months so thought there was something to do with the different version of android jelly bean??? i used to be on ARHD18 which worked perfectly. i did what i said above and this happened. ive tried installing miui from ARHD18 and that failed aswell. it had no lockscreen and stuff generally didnt work.
---------- Post added at 12:41 AM ---------- Previous post was at 12:22 AM ----------
sorry thats my CID i think. its 1.31. ive seen a hboot on 1.36 should i upgrade to that and try again? does it require a special cwm?
Click to expand...
Click to collapse
Do these 2 fastboot commands :
Fastboot getvar version-main
Fastboot oem readcid
Post them back please !
---------- Post added at 05:56 AM ---------- Previous post was at 05:55 AM ----------
teravers said:
DONE , thanks alot Mr Hofs for your help and knowledge you share with us, i am learning alot from you , appreciate your time
Click to expand...
Click to collapse
Thanks mate ! At least one case solved in here now
Hi yersterday I've tried to root my HTC one x, I was doing it with video on youtube when I finished doing it and rebooted my phone it turning on but I think it's something with system maby i'm wrong but I have no idea what to do now to get it fully working if you had similar problem or know what I had done wrong and how to fix the problem can you help me please.
That what comes up when I turn my HOX on
How did you root it ? By pushing a file with the custom recovery ? Get a fastboot command
Fastboot getvar version-main
---------- Post added at 08:38 AM ---------- Previous post was at 08:23 AM ----------
Oke, i saw the video. Would you like a new custom rom now ? That's the most easiest !
Mr Hofs said:
Oke, i saw the video. Would you like a new custom rom now ? That's the most easiest !
Click to expand...
Click to collapse
Yeas please
If you are getting the recovery screen when normal booting you have probably flashed the recovery onto the boot partition with fastboot flash boot recovery.img instead of fastboot flash recovery recovery.img
You will need the boot.img for the mainver that you have
And need to flash it with fastboot flash boot boot.img
Sent from my HTC One X using xda app-developers app
Yep, start over with flashing.
First the recovery
Fastboot flash recovery recovery.img
Fastboot erase cache
Then you flash the boot.img from the new rom ! (Its inside the rom.zip)
Fastboot flash boot boot.img
Fastboot erase cache
Then enter the recovery and make a full wipe
Wipe cache, dalvik cache, factory reset, format cache, system and data
Then install the new rom.zip
I did it every thing went fine this time and my HOX is fully rooted and fully working Thank you Mr Hofs
Case......
Ah good to hear that !
And yes....another
CASE CLOSED !
I think I really screwed up my phone, I was trying to get my Google play store working on my phone by adjusting the Dpi (read it somewhere on the internet), so I rebooted and it wouldn't load my rom/system anymore. But the problem now is, is that I can't acces my sd card with HBOOT or similar things, fastboot does see my device but if I try sending files to it the next error appears:
C:\Users\Elke\Desktop\r1-primo-superboot>fastboot flash system shpongle.zip
sending 'system' (131180 KB)... FAILED (command write failed (Unknown error))
Als this error keeps occuring:
C:\Users\Elke\Desktop\r1-primo-superboot>fastboot flash boot boot.img
< waiting for device >
sending 'boot' (2988 KB)... FAILED (status malformed (1 bytes))
Does anybody know what I should do to get my phone working again? Because I really need my phone (it contains all my appointments and homework and stuff)
PS: If you need more information on my phone just ask for it and I'll try my best to find it!
PPS: Thanks in advance!
I think I fixed it
After numerous attempts my phone is responding to some fastboot commands, so I think I got it working again
Edit:
Now my phone is stuck at the HTC startup screen
SirBigAfro said:
After numerous attempts my phone is responding to some fastboot commands, so I think I got it working again
Edit:
Now my phone is stuck at the HTC startup screen
Click to expand...
Click to collapse
Are you sure you flashed the right kernel for the ROM as stated in it's OP?
SirBigAfro said:
After numerous attempts my phone is responding to some fastboot commands, so I think I got it working again
Edit:
Now my phone is stuck at the HTC startup screen
Click to expand...
Click to collapse
heyy man, if you have a custom recovery already installed, use that to wipe your phone and install the new rom
then pull the boot.img out of the rom .zip you are trying to use, then you need to "fastboot flash boot d:/boot.img" (of course, to your boot.img location)
hope this helps
Yes
MameTozhio said:
Are you sure you flashed the right kernel for the ROM as stated in it's OP?
Click to expand...
Click to collapse
Yes I'm sure I flashed the boot-HELLBOY-20130514.img before and then it worked perfectly, but now it got stuck on the htc screen...
brasssmunkye said:
heyy man, if you have a custom recovery already installed, use that to wipe your phone and install the new rom
then pull the boot.img out of the rom .zip you are trying to use, then you need to "fastboot flash boot d:/boot.img" (of course, to your boot.img location)
hope this helps
Click to expand...
Click to collapse
The custom ROM is no longer on my phone due to lack of space, and here is the problem I can't acces my SD card (Won't show up in my computer) in bootloader (to transfer the needed files) Is there someway to transfer my files with fastboot? or ADB or something like that?
Damn
I just reflashed my system, boot, and recovery but still no luck. my phone still won't go past the HTC screen
Im using this ROM + Kernel http://forum.xda-developers.com/showthread.php?t=2230656
I don't care about my user files anymore, I just want to get my phone to work again
SirBigAfro said:
I just reflashed my system, boot, and recovery but still no luck. my phone still won't go past the HTC screen
Im using this ROM + Kernel http://forum.xda-developers.com/showthread.php?t=2230656
I don't care about my user files anymore, I just want to get my phone to work again
Click to expand...
Click to collapse
flash the kernel
http://www.mediafire.com/download/vj8vv8hjyhzg3xv/boot-HELLBOY-42-201305202359.img
Seraz007 said:
flash the kernel
http://www.mediafire.com/download/vj8vv8hjyhzg3xv/boot-HELLBOY-42-201305202359.img
Click to expand...
Click to collapse
I have already done that, still not working
SirBigAfro said:
I have already done that, still not working
Click to expand...
Click to collapse
i think u flashed kernel which is in the ROM Thread which doesnt work
just try this one out :fingers-crossed:
and remember to do a full wipe
Seraz007 said:
i think u flashed kernel which is in the ROM Thread which doesnt work
just try this one out :fingers-crossed:
and remember to do a full wipe
Click to expand...
Click to collapse
thank you I will try this in about half an hour! (btw: Do I need a correct kernel in order to get to my recovery? )
SirBigAfro said:
thank you I will try this in about half an hour! (btw: Do I need a correct kernel in order to get to my recovery? )
Click to expand...
Click to collapse
umm no u can get to recovery by holding down power button until your screen turns off and then holding your volume DOWN button
if u have full wiped b4 there's no need to do it again
Seraz007 said:
umm no u can get to recovery by holding down power button until your screen turns off and then holding your volume DOWN button
if u have full wiped b4 there's no need to do it again
Click to expand...
Click to collapse
I just flashed the boot image you gave me, but it's still stuck at the HTC screen.
Dammit again
I have to go to school in about 2 minutes so here is the status of my phone
-just flashed new kernel, but still stuck at HTC screen
-In bootloader when I select my customrecovery (TWRP) it shows HTC with a loadboar in the right-upper corner, then that loadingbar disappears and it shows just HTC (with red lettering underneath : This build... etc) and gets stuck again.
Thanks for the help so far but my phone is still broken dammit :c
Since you've got fastboot working again, re flash your custom recovery first.
Fastboot flash recovery recovery.img
Then boot into recovery.
Now you can go into >advance>mount>mount USB storage
( using TWPR )
Copy the custom Rom to your pc
Unmount USB storage move to >wipe cashe, dalvick cache, factory reset, system
Wipe everything.
Move to > install and flash Rom
Once install is finished click the wipe cashe/dalvick.
Go back to the home screen in TWRP click >reboot> bootloader
Now flash your kernel. fastboot flash boot boot.img
Once finished fastboot reboot
I think you might have had a bad recovery flash.
russellvone said:
Since you've got fastboot working again, re flash your custom recovery first.
Fastboot flash recovery recovery.img
Then boot into recovery.
Now you can go into >advance>mount>mount USB storage
( using TWPR )
Copy the custom Rom to your pc
Unmount USB storage move to >wipe cashe, dalvick cache, factory reset, system
Wipe everything.
Move to > install and flash Rom
Once install is finished click the wipe cashe/dalvick.
Go back to the home screen in TWRP click >reboot> bootloader
Now flash your kernel. fastboot flash boot boot.img
Once finished fastboot reboot
I think you might have had a bad recovery flash.
Click to expand...
Click to collapse
I tried flashing the newest recovery (TWRP) but no luck, any advice and which recovery rom/img I should use?
Are you primoc or primou?
---------- Post added at 05:40 PM ---------- Previous post was at 05:17 PM ----------
I'm primoc I've got everything you'll need if you are too
If you're primou, frankly I'm sorry but I wouldn't be able to help you with what recovery/boot.img or Rom to use because I have not and will not be able to test them before I suggest them.
Just not good help practice.
SirBigAfro said:
I tried flashing the newest recovery (TWRP) but no luck, any advice and which recovery rom/img I should use?
Click to expand...
Click to collapse
RUU back to stock, then re-"unlock", and re-try, soemthing must not be right or something.
russellvone said:
Are you primoc or primou?
---------- Post added at 05:40 PM ---------- Previous post was at 05:17 PM ----------
I'm primoc I've got everything you'll need if you are too
If you're primou, frankly I'm sorry but I wouldn't be able to help you with what recovery/boot.img or Rom to use because I have not and will not be able to test them before I suggest them.
Just not good help practice.
Click to expand...
Click to collapse
I have primoU...
brasssmunkye said:
RUU back to stock, then re-"unlock", and re-try, soemthing must not be right or something.
Click to expand...
Click to collapse
What is RUU and how do I use it? and also were can I find it?
Hey there guys, I've just unlocked Bootloader as described on the htcdev./ site,
Unfortunately, now when I enter HBOOT, no only do I recieve a "failed to open usb master mode" and "pj46img.zip" fail message, but when I click "Recovery", my phone switches back to fastboot. I need to backup my system to downgrade and root afterwards.. anyways
Anyone experienced this before or has any idea what to do?
The Model is: HTC Endeavor , Android ver. 4.2.2, Sense 5...
and...
What the status bar tells me :
*** UNLOCKED ***
ENDEAVORU PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
MICROP-None
RADIO-5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode : disabled
HW secure boot: enabled
MODEM PATH : OFF
Jun 21 2013,18:24:41
Error message is normal because you have the usb connected. Without cable you won't get the message.
Second when you are in the bootloader do the command :
Fastboot erase cache
And you need to flash or boot a custom recovery !
Fastboot boot recovery.img
Or
Fastboot flash recovery recovery.img
The custom recovery has to be named "recovery.img" and be placed in the fastboot folder on the pc !
And what do you want to downgrade ?
Cache erased
Mr Hofs said:
Error message is normal because you have the usb connected. Without cable you won't get the message.
Second when you are in the bootloader do the command :
Fastboot erase cache
And you need to flash or boot a custom recovery !
Fastboot boot recovery.img
Or
Fastboot flash recovery recovery.img
The custom recovery has to be named "recovery.img" and be placed in the fastboot folder on the pc !
And what do you want to downgrade ?
Click to expand...
Click to collapse
Wow, thanks for such a quick answer.. sorry for not coming and thanking sooner...
Anyways.. I erased the Cache as recommended.
The reason why downgrade was because somewhere I read there are problems with rooting my phone on 4.2.2 so I thought downgrading to 4.1.1 would be adequate... Anyways recent research pushed me into believing it is not necessary...
Yeah, so anyway I've been looking for a custom recovery to use as you said...
version-main: 4.18.401.2
cidnum: HTC__032
Do I need to find a recovery for exactly my CIDnumber?
Custom recovery to enable flashing of all roms (sense 5 and kit Kat)
https://www.dropbox.com/s/14c1ikgsp38axwv/twrp-recovery2.img
Thanks again!
Mr Hofs said:
Custom recovery to enable flashing of all roms (sense 5 and kit Kat)
Click to expand...
Click to collapse
Thank you many times! :good:
Stuck... damn it!
Yeah, umm hello there again.
So I used the Cyanogenmod recovery in the end...
Anyways I let myself led by the guide posted by Thömy (http://forum.xda-developers.com/showthread.php?t=2583037)...
Everything went fine, I got the bootloader unlocked (before already), the recovery provided by ClockWorkMod, did a Data wipe, downloaded everything necessary, booted into Recovery... but when I got to flash the CM 11.0.zip (installing from the zip file in recovery) It failed..
So for no reason i decided to simply restart the phone and try whatever will I find then.. I haven't got past the white/green HTC screen though and I'm stuck at it... I can get back to recovery or the Bootloader, but nothing more, nothing less...
Any Idea?.. I'm struggling with it for a few hour now and feel lost
MartyPavelka said:
Yeah, umm hello there again.
So I used the Cyanogenmod recovery in the end...
Anyways I let myself led by the guide posted by Thömy (http://forum.xda-developers.com/showthread.php?t=2583037)...
Everything went fine, I got the bootloader unlocked (before already), the recovery provided by ClockWorkMod, did a Data wipe, downloaded everything necessary, booted into Recovery... but when I got to flash the CM 11.0.zip (installing from the zip file in recovery) It failed..
So for no reason i decided to simply restart the phone and try whatever will I find then.. I haven't got past the white/green HTC screen though and I'm stuck at it... I can get back to recovery or the Bootloader, but nothing more, nothing less...
Any Idea?.. I'm struggling with it for a few hour now and feel lost
Click to expand...
Click to collapse
Use the Recovery that Mr Hofs gave you and flash the CM 11 package. Should work. CWM recovery sometimes gives you errors while flashing since you may have to modify the updater-script with-in the package to flash successful.
Nice, felt some progression
aromerblz said:
Use the Recovery that Mr Hofs gave you and flash the CM 11 package. Should work. CWM recovery sometimes gives you errors while flashing since you may have to modify the updater-script with-in the package to flash successful.
Click to expand...
Click to collapse
Cool :good:
So I used the Recovery from el Maestro and flashed the CM 11 package.
I got to a "Cyanogenmod" booting screen at which I'm stuck...
It updated some files but, that's all and the arrow wheel keeps spinning? any Idea?
btw: I'm really sorry if someone already had this problem,
I swear I spent hours looking for one, but when I found a similar one,
it wasn't really what I was looking for in the end
[EDIT] Also when I try to boot the system with the boot.img file included in cm-11 package, I'm not stuck on the Cyanogenmod screen but all the way back on the HTC logo screen again
Flashed the boot.img from the cm11 zip ?
Flash instead of Boot
Mr Hofs said:
Flashed the boot.img from the cm11 zip ?
Click to expand...
Click to collapse
Yes, I until now was directly booting "fastboot boot boot.img" with cmd on computer.
Now when I flashed it into the device, I cannot even get to the Cyanogenmod screen, hehe
MartyPavelka said:
Yes, I until now was directly booting "fastboot boot boot.img" with cmd on computer.
Now when I flashed it into the device, I cannot even get to the Cyanogenmod screen, hehe
Click to expand...
Click to collapse
The flash command should be "fastboot flash boot boot.img" are you sure you are doing it right?
aromerblz said:
The flash command should be "fastboot flash boot boot.img" are you sure you are doing it right?
Click to expand...
Click to collapse
yep Did it exactly this way ... It now behaves the same as when only booted with the boot.img :/
Did you perform a full wipe within the custom recovery before installing the cm zip ? Seems to me you forgot to wipe something !
MartyPavelka said:
yep Did it exactly this way ... It now behaves the same as when only booted with the boot.img :/
Click to expand...
Click to collapse
Ok try this..
Assuming you already did a full nandroid backup, do the following:
1. Do a FULL wipe on your device.
2. Flash the ROM again
3. Reboot to bootloader
4. Flash the boot.img again
5. Reboot
6.Thank me if it works.
Should work, that's normally the steps I take when flashing ROM's and have never failed me.
If he flashes the boot.img alresdy its a wipe issue. Doesnt matter when you flash it because it's not going to be changed installing a rom or wiping partitions from within the recovery (definitely not on a s-on device)
6: kinda corny to mention that isn't it ! Bit of a desperate call for appreciation......not confident enough you need confirmation
Got past it!
aromerblz said:
Ok try this..
Assuming you already did a full nandroid backup, do the following:
1. Do a FULL wipe on your device.
2. Flash the ROM again
3. Reboot to bootloader
4. Flash the boot.img again
5. Reboot
6.Thank me if it works.
Should work, that's normally the steps I take when flashing ROM's and have never failed me.
Click to expand...
Click to collapse
Well, wow... ok... I got past the logo screen and I now get keyboard failure messages... but wow... thanks... A huge rock fell of my chest... Thanks to both of you... I did a full wipe again.. I guess it was a wipe issue afterall -_- what a noobfailure..
I don't think it "kills to try" like I mentioned at the bottom that's how I usually do mines when am blocked by issues. and NO not desperate for appreciation either.
---------- Post added at 01:33 PM ---------- Previous post was at 01:31 PM ----------
MartyPavelka said:
Well, wow... ok... I got past the logo screen and I now get keyboard failure messages... but wow... thanks... A huge rock fell of my chest... Thanks to both of you... I did a full wipe again.. I guess it was a wipe issue afterall -_- what a noobfailure..
Click to expand...
Click to collapse
Have you flashed the GAPPS?
aromerblz said:
I don't think it "kills to try" like I mentioned at the bottom that's how I usually do mines when am blocked by issues. and NO not desperate for appreciation either.
---------- Post added at 01:33 PM ---------- Previous post was at 01:31 PM ----------
Have you flashed the GAPPS?
Click to expand...
Click to collapse
Yeah... Wrong version
aromerblz said:
and NO not desperate for appreciation either
Click to expand...
Click to collapse
LOL !
MartyPavelka said:
Yeah... Wrong version
Click to expand...
Click to collapse
Just flash the correct one and you should be good to go.. :victory: