Develop Bugs

[Q] removing Cm10.1

I am using CM 10.1 4.2.2 and want to go back to the stocked version. Please help to confirm the following -
1. Can I simply flash the leaked 4.2.2 samsung firmware on top of CM10.1 ? Any issues / caution steps ? Any links / procedure will be helpful. Also is this leaked firmware having any known issues ?
2. Will #1 remove the root privilege ?
3. Can i simply re root as i ddi earlier (want to remove the bloatwares)?

neawasthi said:
I am using CM 10.1 4.2.2 and want to go back to the stocked version. Please help to confirm the following -
1. Can I simply flash the leaked 4.2.2 samsung firmware on top of CM10.1 ? Any issues / caution steps ? Any links / procedure will be helpful. Also is this leaked firmware having any known issues ?
2. Will #1 remove the root privilege ?
3. Can i simply re root as i ddi earlier (want to remove the bloatwares)?
Click to expand...
Click to collapse
1.yes.flash official serbian version via odin(do a factory Reset first)
2.yes.
3.you will have to root again by chotus method again

androidbaba said:
1.yes.flash official serbian version via odin(do a factory Reset first)
2.yes.
3.you will have to root again by chotus method again
Click to expand...
Click to collapse
I was able to successfully flash to stock 4.2.2. Thanks for all who helped !
Reiterating once more for others who stumble on this thread (Details India , prior on CM10.1 (4.2.2) )-
1. Download the stock 4.2.2. form sammobile.
2. Flash using odin 3.7
2.1 Extract the tar.md5 file and load it in PDA.
2.2 Flash
3. On reboot stuck with the boot (keeps displaying the samsung logo) . wont let me go in recovery !
3.1 Force poweroff (removed battery)
3.2 Start using [volume up][home][power] button to go in recovery
3.3 do a factory wipe / data reset
4. Bravo !! Enjoy
feedback - As off now working like charm, UI though could have been better. But I will say better than 4.1.1 stock !
tip - use atom launcher + clock widget from Cm10.1 (available on XDA somewhere)
Thanks !

[Q] After installing TWRP it's ok to uninstall CWM, and how?

First. I have installed CWM but is just backing up files, not restoring them. So I installed TWRP_R01.
My first question :
1. It's safe to remove CWM and stick only with TWRP, and how to do it?
And second question :
2. It;s safe to install TWRP_R02 over TWRP_R01, and what it the difference between the two of them, and how to do it?

HUAWEIAscendP6 said:
First. I have installed CWM but is just backing up files, not restoring them. So I installed TWRP_R01.
My first question :
1. It's safe to remove CWM and stick only with TWRP, and how to do it?
And second question :
2. It;s safe to install TWRP_R02 over TWRP_R01, and what it the difference between the two of them, and how to do it?
Click to expand...
Click to collapse
Yes TWRP Is Completely Safe. TWRP_R01 Is Not Permanent Recovery Its Not Affect Your Recovery Partition. TWRP_02 Is Permanent Recovery It Will Installed iN Recovery Partition and Remove Your Stock Recovery. If You Want To Install Offical Firmware You Have To Install Stock Recovery Again.

Thank you. So it's ok to use for now the non permanent version? What does exactly permanent recovery mean, and what's wrong with the non permanent version.
And how to remove CWM please, if you know.

HUAWEIAscendP6 said:
Thank you. So it's ok to use for now the non permanent version? What does exactly permanent recovery mean, and what's wrong with the non permanent version.
And how to remove CWM please, if you know.
Click to expand...
Click to collapse
I Think Surdu_Petru Will Not Update Non Permanent Recovery Anymore. I Suggest You Install permanent Recovery.
Instruction Are In Thread.
http://forum.xda-developers.com/showthread.php?t=2534420

Thanks, but how to put the phone in fastboot? Is there a tool that can do that?
And how to use those commands via adb shell or cmd.
Maybe a more extended tutorial on how to do it would be necessary.
EDIT :
And I think that when I installed TRWP that wiped out CWM. I'm not sure but I cannot enter CWM no more, that's ok, because I wanted TWRP, but maybe @surdu_petru should clarify this : if installing that version of TWRP, that's _R01, will automatically wipe CWM from the phone.

HUAWEIAscendP6 said:
Thanks, but how to put the phone in fastboot? Is there a tool that can do that?
And how to use those commands via adb shell or cmd.
Maybe a more extended tutorial on how to do it would be necessary.
EDIT :
And I think that when I installed TRWP that wiped out CWM. I'm not sure but I cannot enter CWM no more, that's ok, because I wanted TWRP, but maybe @surdu_petru should clarify this : if installing that version of TWRP, that's _R01, will automatically wipe CWM from the phone.
Click to expand...
Click to collapse
Hello !
As I can see, ( not only you ) almost all members do not read the whole OP , and also second OP with attention !
If you had the patience to read everything, ( however it is for your own good ) you'll realize that I have clarified everything about twrp recovery !
As long as TWRP R02 is not specified that it is a permanent recovery, we can deduce logically that R02 is an update to R01 !
Good luck !

@surdu_petru Ok, thanks. I will use SDK Tool to install adb and fastboot. How to put the device in fastboot by the way, there is some buttons combination command?
But what's new in _V02? Must be some upgraded stuff right?
And why update, if with _V02 I must revert to stock recovery if I want to flash another ROM.

HUAWEIAscendP6 said:
@surdu_petru Ok, thanks. I will use SDK Tool to install adb and fastboot. How to put the device in fastboot by the way, there is some buttons combination command?
But what's new in _V02? Must be some upgraded stuff right?
And why update, if with _V02 I must revert to stock recovery if I want to flash another ROM.
Click to expand...
Click to collapse
As mentioned before, you have everything you need there, just have to read and understand !
But, I have a question , why you want to install something in your device if you don't want to read also Installation section ?
Please read carefully the first and second post from TWRP Recovery, and if you doubt, I will answer you with the greatest pleasure !
TWRP V02 fixed Internal storage , but not definitive ( problems persist both here and in V03 ! )
As I see, you want to install V02 ? If your answer is Yes, why you need to put your device in fastboot mode ?

@surdu_petru Well, I want a recovery that works , just in case. Can I update your TWRP _V02 the easy way? I mean can I update from my _V01 recovery, install zip from external sdcard? I'm on the latest firmware. So it must work right? I have BlueAndroid V02
I'm ready to install even the _V03, I just need the simple instructions.
In your post you say something about CMD and adb commands.

@surdu_petru I have installed v2 but v3 faild.
HUAWEIAscendP6

HUAWEIAscendP6 said:
@surdu_petru I have installed v2 but v3 faild.
HUAWEIAscendP6
Click to expand...
Click to collapse
Please, what firmware you use currently ? As you can see R03 is ONLY for firmware B118 CN version !

surdu_petru said:
Please, what firmware you use currently ? As you can see R03 is ONLY for firmware B118 CN version !
Click to expand...
Click to collapse
@surdu_petru The Latest. There is a permanent TWRP for this firmware?
HUAWEIAscendP6

HUAWEIAscendP6 said:
@surdu_petru The Latest. There is a permanent TWRP for this firmware?
HUAWEIAscendP6
Click to expand...
Click to collapse
Nop, permanent recovery ( TWRP ) is ONLY for B118 CN version - for moment !
Not, tested , but someone say it work also permanent recovery on B125 if you updated B125 from B118 CN !

@surdu_petru It's a new phone.
HUAWEIAscendP6

HUAWEIAscendP6 said:
@surdu_petru I never did an update Just bought the phone,rooted and install TWRP. But it has the latest
Firmware version – B125 (International)
Android version – 4.2.2
Emotion UI version – 1.6
Kernel version -*3.0.8.795
HUAWEIAscendP6
Click to expand...
Click to collapse
HUAWEIAscendP6

[Q] Custom roms

Hi!
My p6 has now official international B510. I would like to install twrp and then custom rom, but I don't know where to start. I guess I should install kitkat beta? If so where I can download it and can I just install it via local update?
Thanks!

90mrsandman said:
Hi!
My p6 has now official international B510. I would like to install twrp and then custom rom, but I don't know where to start. I guess I should install kitkat beta? If so where I can download it and can I just install it via local update?
Thanks!
Click to expand...
Click to collapse
Hello !
If you want to install TWRP Recovery first, make sure your bootloader is unlocked !
Also you need to have some basic knowledge on how to use "adb", "fastboot" and how to set proper driver in your PC to recognized your device even in bootloader mode ! ( If you think these things are still unknown to you, than Google is your friend in order to bring this knowledge )
After, you can start with those threads : Club Huawei, How-TO - Flash Kernel, TWRP and Stock Recovery, General Bootloader Unlock for ALL Huawei Phones!, TWRP 2.7.1.0 .
Good luck :good:

Thanks a lot!

How to install lollipop into my p601

hello guys official lollipop 5.1.1 have been released to p601 in russian region is it okay to install it in my note (different region) and how to install it via odin(i need the steps)
Thank You

Aly1000 said:
hello guys official lollipop 5.1.1 have been released to p601 in russian region is it okay to install it in my note (different region) and how to install it via odin(i need the steps)
Thank You
Click to expand...
Click to collapse
1. download odin
2. download the rom you want to install
3. put the table in dowload mode power+home+volume down untill the table start in dowload mode
4. start odin and connect the USB cable, you shold see in ID:COM your device
5. in PDA or AP (depend and the version of odin) put the rom you download
6. start the flash.
you have to check only the Auto Reboot and F. Reset Time botton
hope it can help

Aly1000 said:
hello guys official lollipop 5.1.1 have been released to p601 in russian region is it okay to install it in my note (different region) and how to install it via odin(i need the steps)
Thank You
Click to expand...
Click to collapse
Can you provide with the link

there is p601 hydronourium custum rom at my p602, how to install 5.1.1 stuck rom?

Kartik Pokar said:
Can you provide with the link
Click to expand...
Click to collapse
use this tool
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647

Don't install 5.1.1
Aly1000 said:
hello guys official lollipop 5.1.1 have been released to p601 in russian region is it okay to install it in my note (different region) and how to install it via odin(i need the steps)
Thank You
Click to expand...
Click to collapse
i have installed 5.1.1 Russian yesterday for my P601... but there are some problems that still there is no fix for them..
you will lose your root and you can't flash any custom or modified recovery or Rom.
there is an option added to 5.1.1 : "Secure Download: Enabled" and because of this you can't flash any .tar and .md5 files like before. :crying::crying::crying: i suggest you Don't install This Update until some hackers and programmers find solutions for them.

[GUIDE] OTA Update Rootet(Magisk) H6X (Honor 6X)

I had trouble updating my Honor 6X (BLN-L21) after I rooted it, so I searched the whole xda to gain some information. Finally I made it, so I thought I could share this information with you guys, hope it helps, but I do not take responsibility if not, as you may have already heard, the Honor 6X (like every Kirin device) is very easy to brick.
- If everything is gone alright you should keep all of your data, apps and settings.
- If there is a big update, like from MM to N you maybe should backup all your stuff and relock the bootloader to update (big updates can relock frp so you can't unlock your bootloader then a rollback is the only way.
Successfully tried from:
B360 to B365
B365 to B367
Short Version (for expert users):
1. uninstall busybox bynaries and the Xposed Framework
2. uninstall magisk (inside the app)
3. flash stock recovery.img (of your actual firmware)
4. flash stock boot.img (of your actual firmware)
5. make OTA update (Reminder: safe update file)
6. flash twrp again and root
7. you are all done
Detailed Version:
#cmd commands#
1. backup your system over TWRP #adb reboot recovery# and do a backup there (for safety reasons)
2. #fastboot reboot#
3. uninstall busybox bynaries and the Xposed Framework(not just the app) (if you have it)
4. uninstall magisk (in app over "complete Uninstall button")
5. restart to bootloader #adb reboot bootloader#
6. flash stock recovery #fastboot flash recovery recovery.img# [use the recovery out of your actual firmware, how to extract is explained in the Forum I added at the end
7. flash stock boot #fastboot flash boot boot.img# [also use the extracted version of your actual package]
8. #fastboot reboot#
9. download update over OTA Update app (System update) in stock system. -> If the "System updater" app does not provide a Full version of the update package, the update could get stopped at 8% saying it could not verify the update, if so, just take the step to the error and reboot, if you then search for an update again, the "System updater" should now show you a Full version of the update package. like "BLN-L21C432B365-FULL"
10. you should safe that update files out of the HwOUC folder, so you can extract the recovery.img and boot.img later before you restart your device to do the update, because the system deletes these files after successful update
11. update over OTA Update app (System update) in stock system
12. restart to bootloader (#adb restart bootloader#)
13. flash twrp again #fastboot flash recovery twrp-3.1.1-0-berlin.img# [use the OpenKirin twrp edition (the official leads to a bootloop] -> [url]https://forum.xda-developers.com/honor-6x/development/twrp-t3583413[/URL]
14. Important is not to boot to system after flashing TWRP, exactly like as you installed it the first time. So you do #fastboot reboot# and then Vol down + lock
15. backup your system over TWRP (for safety reasons)
16. #adb reboot recovery#
17. flash Magisk zip in TWRP again
18. reboot in twrp
19. you are ready to go with the latest stock rom​
How to extract boot.img and recovery.img out of your actual firmware is explained here:
[url]https://forum.xda-developers.com/honor-6x/how-to/extract-stock-recovery-img-boot-img-img-t3676880[/URL] thanks @Khan ubaid​

citizenserious said:
the Honor 6X is very easy to brick.
Click to expand...
Click to collapse
Not just the 6X but every Kirin device.

This work only with packages like "xxxB360-FULL" or even with smaller downloaded packages that just updates some files? And, if I choose to do this with the FULL package do i have to re modify all the settings that i use actually?

RedSkull23 said:
This work only with packages like "xxxB360-FULL" or even with smaller downloaded packages that just updates some files? And, if I choose to do this with the FULL package do i have to re modify all the settings that i use actually?
Click to expand...
Click to collapse
I already tried it with the FULL package (edited the Guide btw.) you keep all your settings and stuff like before.
If it doesn't show you the FULL package just try the update until it fails, the system than will show you a FULL version of the update after the restart and research. That worked for me so far.
Hope I could help

citizenserious said:
I already tried it with the FULL package (edited the Guide btw.) you keep all your settings and stuff like before.
If it doesn't show you the FULL package just try the update until it fails, the system than will show you a FULL version of the update after the restart and research. That worked for me so far.
Hope I could help
Click to expand...
Click to collapse
What a nice notice, thanks dude! I already own the FULL, i only was worried about the fact that i could lose my data with the FULL one, i waa seeing it a clean firmware install but after this i can go straight with the update. I'll do that later today

RedSkull23 said:
What a nice notice, thanks dude! I already own the FULL, i only was worried about the fact that i could lose my data with the FULL one, i waa seeing it a clean firmware install but after this i can go straight with the update. I'll do that later today
Click to expand...
Click to collapse
I have done it that way yesterday, from B365 to B367 with the FULL package.
But nevertheless please back up your data.
edit: please let us know if it worked for you too

Thank for this guide. I might use this when an update comes.

[email protected] said:
Click to expand...
Click to collapse
What's the matter?

citizenserious said:
I have done it that way yesterday, from B365 to B367 with the FULL package.
But nevertheless please back up your data.
edit: please let us know if it worked for you too
Click to expand...
Click to collapse
Finally i found some time to dedicate on updating my phone, and I'm happy to say that it worked. I made from B360 to B365 and from B365 to B367, both worked at first shot. The only thing that i just can't understand is why the OTA package downloaded yesterday worked immediately, while the same B365-FULL package downloaded a month ago, copied on PC before starting it and later started didn't. With stock recovery and boot images obviously. I tried to start it later but nothing, i tried dload method with the update.app but neither that worked. Probably the OTA downloaded creates a sort of signature that can't be recreated that easily, if the same package fails through dload method... But what matters most is that now I'm on B367, protected with the latest security patch. Sorry for the late answer, time is hard to find... Thanks

Hi
Can someone upload the boot.img and and recovery.img from B367
Thanks in advance

Archerous said:
Hi
Can someone upload the boot.img and and recovery.img from B367
Thanks in advance
Click to expand...
Click to collapse
B367 of which model BLN-LXXCXXX?

shashank1320 said:
B367 of which model BLN-LXXCXXX?
Click to expand...
Click to collapse
I forgot sorry
BLN-L21C432B367

Archerous said:
I forgot sorry
BLN-L21C432B367
Click to expand...
Click to collapse
Check repository thread. Redskull23 has updated there. You may find in OP also in that thread. Link to the thread in my signature

shashank1320 said:
Check repository thread. Redskull23 has updated there. You may find in OP also in that thread. Link to the thread in my signature
Click to expand...
Click to collapse
There is no B367 in the Repository,no boot.img or recovery. thanks for you help
I wait for the next update,and i will not forget to save the update.app to pc. And extract the files

Archerous said:
There is no B367 in the Repository,no boot.img or recovery. thanks for you help
I wait for the next update,and i will not forget to save the update.app to pc. And extract the files
Click to expand...
Click to collapse
@RedSkull23, please see bro. You have updated to this and may be able to share :good:

shashank1320 said:
@RedSkull23, please see bro. You have updated to this and may be able to share :good:
Click to expand...
Click to collapse
I share ist,with the next update :good:

shashank1320 said:
@RedSkull23, please see bro. You have updated to this and may be able to share :good:
Click to expand...
Click to collapse
If we find the B367 package I'll upload everything from it!

I was on rooted BLN-L24C5678B360, and I want to take the OTA 365, so I flashed stock recovery and boot, reboot into system and started the update, but it failed, afterwards the phone stuck at booting up screen.
I have to boot into fastboot and run "fastboot oem relock [my unlock code]" to relock it, then followed by a factory reset. But when it comes to update, it failed again. Upon reboot, it stuck again with the message "Your device has failed verification and may not work properly."
What did I do wrong?
Update: recovered with the official rollback software to 6.0.

shadowcliffs said:
I was on rooted BLN-L24C5678B360, and I want to take the OTA 365, so I flashed stock recovery and boot, reboot into system and started the update, but it failed, afterwards the phone stuck at booting up screen.
I have to boot into fastboot and run "fastboot oem relock [my unlock code]" to relock it, then followed by a factory reset. But when it comes to update, it failed again. Upon reboot, it stuck again with the message "Your device has failed verification and may not work properly."
What did I do wrong?
Click to expand...
Click to collapse
You can try full firmware for b365 if available via dload.
Unlock your bootloader and it will boot to twrp and then boot normally.