Develop Bugs

[Q] Help Un-Soft-bricking SGH-i747M

I have soft-bricked my GS3 - SGH-i747M.
I can still get into the Galaxy S3 Download Mode screen (Pressing VOLUME Down + HOME + POWER button), and am running ODIN3 v3.07.
But I have not been able to restore my backed ROM, nor a couple of "stock" ROMs that I have downloaded.
I ran into trouble trying to get the proper ClockwordMod installed.
Any suggestions would be appreciated. Thanks

Start from scratch. Load a image using Odin and re do it all. Root etc
Sent from my Samsung Galaxy S3

when i soft bricked my phone i just followed this thread and reflashed the stock rooted rom. This method of rooting involves flashing a stock rom with root injected into it so in essence you are just flashing back to stock. No need to wipe data before doing this process (at least in my experience)
The thread also includes the steps to get clockworkmod

success
that got it Florad, thanks much

*HELP* Friend Soft Bricked my phone
Let my self proclaimed tech savy friend borrow my phone for a few days... He decides to root it for me in thanks.
Now, all it is able to do is access the Download Function. No Recovery, instead I get a message saying "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." Kies will not recognize the phone and connect. On boot it shows the SAMSUNG logo and shuts off. Sometimes on boot it just shows an empty battery. LED no longer comes on...
It is a Samsung gs3 sgh-i747m from the MTS Allstream carrier.
I have searched forum after forum to find what to do. Downloaded every Firmware rom from a Canadian provider (except MTS 'cause there just isn't any out there with valid links), tried to flash with Odin3 v3.07 .... no luck. Everything fails.
Phones are not really my language. From what I get he was trying to root:
RecoveryGalaxyS3USCanada.tar
SuperUser.zip
which worked but SuperSU kept crashing so he tired:
Siyah-s3-v1.9.1.tar
which caused the crash. since then I can only imagine what other things he tried in attempts of recovery before giving it back to me to figure out.
As for the few Roms (This one being Telus) I have attempted in hopes to reverse it, this has always been the result in Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I747MVLALE8_I747MOYBALE8_20120523.225040_REV04_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Any help would be greatly appreciated.

Did you install latest 4.3 firmware. Do you have a line that says Knox in download mode.?

SaHiLzZ said:
Did you install latest 4.3 firmware. Do you have a line that says Knox in download mode.?
Click to expand...
Click to collapse
There is nothing saying anything about Knox
Odin Mode
PRODUCT NAME: SGH-I747M
CUSTOM BINARY DOWNLOAD: YES (15 COUNTS)
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 1
BOOTLOADER AP SWERV: 1
SECURE CHECK FAIL: aboot
As for the latest firmware, Im not exactly sure what I am looking for or where to get it. Like I said, not my language.

Wow 15 counts.. awesome!
S it looks like it was on 4.3 at some point of time.
1. You will need to pick a carrier file from here, http://forum.xda-developers.com/showthread.php?t=2543854 , and download it (really slow downloads) and use ODIN to install it.
OR
2. Follow this thread here, it is for Note 2, but same idea applies to your S3 for Emergency firmware recovery: http://forum.xda-developers.com/showthread.php?t=2261153
Good luck and post back, I will suggest #2 as it is not your language..

help v.v
first, im new here and don't know much on how things work, so im sorry if ive caused problems posting this. i rooted my galaxy i747. didn't install clockwork like an idiot and tried to put siyah firmware on my phone. when Odin tried to reboot my phone my phone just shut off and Odin said <something> Removed! except with numbers where i put something. since then ive tried to put normal fiemwares back on and nothing has worked. i even tried the method here http://forum.xda-developers.com/showthread.php?t=1739426 and that just failed or froze every time. i don't know what to do. i can try to start my phone. the Samsung white letters pop up then vanish and nothing. sometimes it will get to the galaxy s 3 screen then blackness. im stressed and have been trying to fix this for two days and really need help :crying: :crying:
anyone who can help will be greatly appreciated!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

formulaF said:
first, im new here and don't know much on how things work, so im sorry if ive caused problems posting this. i rooted my galaxy i747. didn't install clockwork like an idiot and tried to put siyah firmware on my phone. when Odin tried to reboot my phone my phone just shut off and Odin said <something> Removed! except with numbers where i put something. since then ive tried to put normal fiemwares back on and nothing has worked. i even tried the method here http://forum.xda-developers.com/showthread.php?t=1739426 and that just failed or froze every time. i don't know what to do. i can try to start my phone. the Samsung white letters pop up then vanish and nothing. sometimes it will get to the galaxy s 3 screen then blackness. im stressed and have been trying to fix this for two days and really need help :crying: :crying:
anyone who can help will be greatly appreciated!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
What bootloader was on your phone before flashing? Can you get into download mode?

[Q] Phone seemingly bricked randomly.

Hi all,
I have had my Galaxy Note 2 for about 3 or 4 months now. I rooted it when I got it, but lost root after a while, and didn't bother doing anything about it. So the only time I have played around with any of that stuff is when I first got it.
Now today, after using fine for most of the day, the screen just wouldn't turn on, and then I held down the power button, and it got stuck on the first screen it shows. I held down the power again, and this time the same screen showed up and got stuck, but it looked like the background was static, instead of plain black. Then the third time I tried restarting, the following message came up:
Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
So I have a few questions. Is it bricked? Can I get my data off it (mainly concerned about messages, but would like everything if possible)? And how do I fix it?
Obviously I'm pretty new to this stuff, but I did try searching before posting this thread. Any help you can give me would be greatly appreciated.
Thanks
Ben

Try flashing stock rom with odin. Should work. Btw we're you on on 4.1.1 or 1.2 ?
Sent from my GT-N7100

Wtf man ?
This some kind of new ****ing syndrome ?
This is the second case...
Can you go into download mode ?
Can you flash anything like stock rom or pit file or recovery rom ?
Can you go into recovery ?
Sent from my GT-N7100 using xda app-developers app

Sorry, I can't be certain which version I had, but I think it was 4.1.2. I know that some of the early Note 2s didn't have the multi-window feature, but mine did, if that helps. I know it's not related to the firmware version, but possibly Samsung released both 4.1.2 and that feature in the same update.
Anyway, will flashing the stock rom keep my data? If not, I assume that's the only option? I found the following thread with instructions on flashing the stock rom:
http://forum.xda-developers.com/showthread.php?t=1896696
I bought the phone from Kogan (an Australian online store), so it is a Hong Kong model. Should I use one of the Hong Kong roms then? Which one (there are 6)? Possibly someone else with a Note 2 from Kogan could help here and with identifying the firmware version?

Look into this thread. ...
http://forum.xda-developers.com/showthread.php?t=2161866
Almost the same issue
Sent from my GT-N7100 using xda app-developers app

UtkarshGupta said:
Wtf man ?
This some kind of new ****ing syndrome ?
This is the second case...
Can you go into download mode ?
Can you flash anything like stock rom or pit file or recovery rom ?
Can you go into recovery ?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Sorry, didn't see your post before. I can go into download mode (it asks if I want to install a custom OS or restart), but trying to go into recovery just restarts to the same error screen. I haven't tried flashing anything yet because I would like to recover my data if possible.
That other thread does look like the same issue. I saw it before, but thought it was a different problem the first time I read it. So if I can't recover my data or flash the stock rom, I should try the USB jig and then warranty? I'll wait to hear back on the data recovery and stock rom questions first.

Try flashing stock rom.
Sent from my GT-N7100 using xda app-developers app

Yes flash stock it should work.
Sent from my GT-N7100

First thing you need is flashing stock ROM, if everything remains fine then you may not lose data, in case bootloop you may need to wipe.

dr.ketan said:
First thing you need is flashing stock ROM, if everything remains fine then you may not lose data, in case bootloop you may need to wipe.
Click to expand...
Click to collapse
Thanks, this is what I wanted to know. Now the next question is which stock rom to use. There are heaps listed on this thread:
http://forum.xda-developers.com/showthread.php?t=1896696
But I don't know which to use, or if it matters.

You can use any
Sent from my GT-N7100 using xda premium

I just tried flashing a stock rom. I used N7100ZSDMB1.
But it failed in Odin. This is the from the message box in Odin at the end of the operation:
<ID:0/024> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100ZSDMB1_N7100OZSDMB1_N7100XXDLK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/024> Odin v.3 engine (ID:24)..
<ID:0/024> File analysis..
<ID:0/024> SetupConnection..
<ID:0/024> Initialzation..
<ID:0/024> Get PIT for mapping..
<ID:0/024> Firmware update start..
<ID:0/024> sboot.bin
<ID:0/024> NAND Write Start!!
<ID:0/024>
<ID:0/024> Complete(Write) operation failed.
<ID:0/024> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
So what should I do from here?
I also noticed that in download mode it shows the following:
Odin Mode
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System status: Custom
Does the 'Custom Binary Download: No' mean that I could send it back under warranty as is? Or does 'System status: Custom' mean that they can see it has been rooted?
And is there still a chance of getting my data back, or does this mean it's not going to work?

Try to flash the original rom trough Kies if trough odin fails.
To do this, do the following:
1: Get your phone serial number from under the battery or go to the phone info/status and get it from there.
2: Put your phone into download mode but DO not connect it yet;
3: Open Kies,
4: In Kies, go to Tools and select the third function which is "Firmware Upgrade and initialization",
5:Enter the model number (ie. GT-N7100), hit OK,
6:Enter your serial number, hit OK,
7: You will be provided with the latest rom version for your phone, hit OK,
---(around now, or somewhere between steps 7-8 or 8-9, Kies should initialize and the download the firmware and Kies will act as not responding, DO NOT close it, it's the usual Samsung cheapness happening, soon it will restore itself, usually after 1-2 mins), do not worry about the phone not being connected).
8: Agreement stuff, etc. CONNECT your phone to the pc (while the phone is in dl mode), then the OK button should come out of the grey, thus clickable. Also make sure you agree to the therms otherwise no OK option for ya.
9: Magic is happening, Kies and your Note are doing their "mojo" now,
10: Wait and pray it gonna come alive again!!
In this way you should only upgrade and your actual data sould be save (considering your odin flash failed). If everything works as it should, your phone will be in the same status as it was the last time.
On the other hand, no you can't bring it back as under warranty. For that you need the following:
Odin Mode
Product Name: GT-N7100
Custom Binary Download: No
Current Binary: Samsung Official
System status: Official
Good luck, let us know how far you went

Sounds like Kies will wipe my data. Is that the case? Do I have any options left to get my data off? That is my primary concern if it's at all possible.

No kies will not wipe your data at all. It will just inject the rom into your phone. Wipe is done separately trough the wipe menu. I've done it before and never lost anything, everything from messages, background etc were in place!
Plain and simple answer: if at the moment there is no other way to boot up your phone by any means, consider your data simply GONE. Odin, Kies or any other method that will help you boot your phone up without wiping are the only ways to save anything.
After all, saving your note is your first priority...for the rest...chit happends:S

Sorry, just saw your edit. So it sounds like it could save my data. I found this thread just before:
http://forum.xda-developers.com/showthread.php?t=2088809
which suggested that your data will be wiped.

What I posted above is the exact procedure

Thanks, and sorry for the late replies that make it seem like I am not reading your posts properly. Being a new member I have to wait 5 minutes between posts.
I will try Kies when I get a chance and let you know how it goes. Thanks again.

no worries

I've just gotten around to trying Kies, and got as far as entering my model and S/N, and the next thing I got was this message:
The device can be initialized to its original settings.
All settings and data will be deleted, and the latest
software version will be installed.
Do you want to proceed with the firmware upgrade and
initialization?
It says 'CAN be initialized to its original settings' so does this mean it's just an option? Matzone, have you seen this before when you have used Kies without wiping your data? I also didn't see a separate wipe option (unless this is what you were refering to), so I wonder if I'm using a different version of Kies. I have 2.5.2.13021_10.
matzone said:
After all, saving your note is your first priority...for the rest...chit happends:S
Click to expand...
Click to collapse
Actually, my Note is easily replaceable (although expensive) but my data cannot be replaced. I'd be surprised if most people don't see it the same as me. I've learnt a lesson though to take regular backups.

can't wipe phone, reboots about 5 seconds into wipe, help?

The title really says it all...I am trying to wipe my phone to put on wicked 9.1 and try some new kernels, but every time I go into recovery and tell it to do a factory reset/wipe, the phone goes on like it is gong to wipe but then about five seconds in, it just reboots. Hours right back into the normal boot procedure and boots up fine like I never told it to wipe.
still pretty new to all of this, I mean I got clockwork recovery on and have learned to flat kernels kitchens and roms, but that's about it. I've never had a problem like this before, but I can't figure out what to do to wipe my phone.
IHave also tried just installing the new room and telling the installer to wipe, but then it just reboots when it gets to that point.
Is there a different way to wipe the phone? I don't want to lose my personal data such s photos calender etc, I understand I'll lost sms longer normal but I back those up so that is ok
Any help for a kind of newbie?
on advance

Also have tried going to Mount/format partition on recovery and manually formatting the data partition...same thing phone just reboots after a couple seconds and acts like I did nothing at all to it
If I was too go to factory reset in the settings menu while the phone is booted up normally what would happen? It scares me cuz it looks like it would kill everything
Oh and I screwed up and accidentally deleted my nandroid backup...yea I'm dumb

Download goo manager.
Hit menu.
Choose "install open recovery script".
Verify it has identified your device correctly.
Let it download and install TWRP.
Reboot into recovery.
Make backup using TWRP.
???
Profit.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

re: rebooting issue
asaqwert said:
The title really says it all...I am trying to wipe my phone to put on wicked 9.1 and try some new kernels, but every time I go into recovery and tell it to do a factory reset/wipe, the phone goes on like it is gong to wipe but then about five seconds in, it just reboots. Hours right back into the normal boot procedure and boots up fine like I never told it to wipe.
still pretty new to all of this, I mean I got clockwork recovery on and have learned to flat kernels kitchens and roms, but that's about it. I've never had a problem like this before, but I can't figure out what to do to wipe my phone.
IHave also tried just installing the new room and telling the installer to wipe, but then it just reboots when it gets to that point.
Is there a different way to wipe the phone? I don't want to lose my personal data such s photos calender etc, I understand I'll lost sms longer normal but I back those up so that is ok
Any help for a kind of newbie?
on advance
Click to expand...
Click to collapse
Here is the best and most surest way to get your phone ready to flash the "Wicked 9.1" or any other custom rom.
(You made a good choice of wanting to flash the Wicked 9.1 rom, it's the best custom rom currently available for our phones.)
Since the recovery mode (wipe) is not functioning properly you will need to Odin flash the stock rooted rom
before flashing any of the custom roms.
By doing the following you will NOT loose any pictures, videos or emails
and you will not loose anything which is on the internal or external sdcard.
You will as you said loose sms UNLESS you go to the play store and download sms backup/restore app.
Here is a link for the SMS backup restore app: https://play.google.com/store/apps/...estore&feature=nav_result#?t=W251bGwsMSwyLDNd
If you already have a backup/restore app like Titanium backup I would advise to backup all your apps first.
That way you will be able to restore the backup/restore sms app but you will be able to restore all your other
apps too after flashing the wicked rom.
After you backed up the sms using this app and after you have flashed the wicked rom you will need to
re-download this backup/restore sms app from the play store in order to restore your sms after you have
flashed the wicked rom.
This step by step is the best, most reliable and cleanest way to restore your phone to a stock rooted T999
and will get the phone ready for the new custom wicked rom to be flashed without any further problems.
Here is the step by step guide:
After you have followed these instructions your phone will be in the same condition
as it was the day you purchased it except for the benefit of being rooted.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download ODIN it's required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
After it's downloaded extract Odin into the same folder you made containing the T999 TAR file.
Download the stock-rooted Odin flash firmware for the T999 Tmobile Galaxy S3
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache! (It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!

Didn't work at all...I'm fact, now I can't even boot into recovery it just reboots after a few seconds at the teamwin screen....
Also before I did this last thing with goo manager, I tried fixing permissions and the same thing happened it just reboots a few seconds after telling it to fix permissions in recovery
I'm really worried...I can't even get into recovery and I'm scared I'm gong to have a broken phone here shortly
Even worse my phone is my only internet connection right now

Misterjunky said:
Here is the best and most surest way to get your phone ready to flash the "Wicked 9.1" or any other custom rom.
(You made a good choice of wanting to flash the Wicked 9.1 rom, it's the best custom rom currently available for our phones.)
Since the recovery mode (wipe) is not functioning properly you will need to Odin flash the stock rooted rom
before flashing any of the custom roms.
By doing the following you will NOT loose any pictures, videos or emails
and you will not loose anything which is on the internal or external sdcard.
You will as you said loose sms UNLESS you go to the play store and download sms backup/restore app.
Here is a link for the SMS backup restore app: https://play.google.com/store/apps/...estore&feature=nav_result#?t=W251bGwsMSwyLDNd
After you backed up the sms using this app and after you have flashed the wicked rom you will need to
re-download this backup/restore sms app from the play store in order to restore your sms after you have
flashed the wicked rom.
This step by step is the best, most reliable and cleanest way to restore your phone to a stock rooted T999
and will get the phone ready for the new custom wicked rom to be flashed without any further problems.
Here is the step by step guide:
After you have followed these instructions your phone will be in the same condition
as it was the day you purchased it except for the benefit of being rooted.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download ODIN it's required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
After it's downloaded extract Odin into the same folder you made containing the T999 TAR file.
Download the stock-rooted Odin flash firmware for the T999 Tmobile Galaxy S3
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache! (It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Click to expand...
Click to collapse
thanks so much!!! by saying it didn't work at all, i meant the goo manager thing... i am just going to start trying what you've said here now...
thank you SO much, this is what forums should be about... thank you for not telling me to go search or stuff like that, cuz i didn't know what to search for or what i could even try at this point, and i don't want to risk ruining a phone i can't afford to replace!!
thanks again
will update on the results....

also what recovery is the best one currently? would you recommend the one that is installed by GooManager or should i go back to clockwork mod recovery? or the TWRP or whatever is it called?? just don't know enough about what is current... am a single daddy now and can't really afford that much time to muck about with my phone.... basically i take a night every couple of weeks to find out if there is a new ROM or Kernel that i could benefit from but i just can't seem to make/find the time to keep up to date on everything.....
thanks again!

re: flashing
asaqwert said:
also what recovery is the best one currently? would you recommend the one that is installed by GooManager or should i go back to clockwork mod recovery? or the TWRP or whatever is it called?? just don't know enough about what is current... am a single daddy now and can't really afford that much time to muck about with my phone.... basically i take a night every couple of weeks to find out if there is a new ROM or Kernel that i could benefit from but i just can't seem to make/find the time to keep up to date on everything.....
thanks again!
Click to expand...
Click to collapse
I have used both CWM and TWRP (goomanager) and TWRP for me is the best.
If I were you I would not mess with any kernels until you get a better understanding
about customizing your phone, flashing, adding mods, what kernels do and why many
people like to change the stock kernels to custom kernels.
I have tried all the custom kernels and I cannot see the purpose of doing so.
With custom kernels you can make the phone respond faster but then you
sacrifice battery life, if you want better battery life you can adjust these kernels
so they use less battery power but then you sacrifice the phone's responsiveness.
I think that the manufacturer of the phone got it just about right with the stock kernel.
A good balance between speed and battery consumption.
Good Luck!

OH MY GOD... what the hell do i do... i'm getting so choked here now...
tried ODIN, wouldn't work... it gave me the following output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDLJA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
what do i do??? it won't let me do anything... i'm just freaking right out now...
whenever it tries to do anything with the data partition it seems to just force reboot.,..
any ideas? please help me here...

re: try this
asaqwert said:
OH MY GOD... what the hell do i do... i'm getting so choked here now...
tried ODIN, wouldn't work... it gave me the following output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDLJA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
what do i do??? it won't let me do anything... i'm just freaking right out now...
whenever it tries to do anything with the data partition it seems to just force reboot.,..
any ideas? please help me here...
Click to expand...
Click to collapse
Try this, do the same thing you done before but instead of using the stock rooted firmware
try this one: http://www.androidfilehost.com/?fid=9390169635556426424
This is the 100% stock firmware WITHOUT root.
The firmware is identical to what all the T999 phones came with from Samsung.
If this flashes successfully you will need to ROOT the phone before you do anything else.
Right now your phone is in the same condition as it was before trying to flash the stock rooted firmware.
Good Luck.

sorry for the freak out post, i just actually AM freaking out.... when i was mucking about with ODIN i realized i had used it before with the SGS3 toolkit for snapdragon v2.1, so i figured maybe i could try to put a stock rom on that way, well all i could get on was a stock recovery, then i put on a CWM recovery using the toolkit and ODIN, and for whatever reason, that recovery will only read my external SD card and not my internal one, and will only let me flash off that... some how, and thankfully, i had a FreeGS3 7.1 rom on there that i was able to flash, as it wouldn't boot up at all after the failure with ODIN... now i got it booting into FreeGS3 7.1 but it is acting really odd... slower than anything, it's slower than my old HTC maple was, feels like an old phone on froyo or something....
so any other idaes? thanks for the help so far
p.s. about the kernels, i've had pretty good luck up until now with sticking with kernels by some of the really experienced devs, like morphic and faux123, and the biggest reason i want to muck about with them is so that i can undervolt my phone, and get a little longer battery life.... i can deal with a LITTLE bit of a loss of performance, as i rarely do much more than browse the web, text, email, and call on my phone, maybe read the news on the BBC app, and do other stuff like that, but no gaming ever, and don't watch much for video on it either, so i really can't tell the difference in speed too much if i have it set up for slightly better battery life
but at this point, i honestly just want it to work again! i just want to be able to wipe it and start from square one! i don't think i could even bring it back to the store for a warranty because they're going to obviously see that i had a different ROM on it than stock

Misterjunky said:
Try this, do the same thing you done before but instead of using the stock rooted firmware
try this one: http://www.androidfilehost.com/?fid=9390169635556426424
This is the 100% stock firmware WITHOUT root.
The firmware is identical to what all the T999 phones came with from Samsung.
If this flashes successfully you will need to ROOT the phone before you do anything else.
Right now your phone is in the same condition as it was before flashing the stock rooted firmware.
Good Luck.
Click to expand...
Click to collapse
before i do this, i'm just wondering if you have any idea why it might be acting this way? i just feel like i'm going to have the same kind of trouble i just had with this rom, as it was obviously having issues with wiping the data partition and/or another area.... i just don't want to muck about too much and end up with a brick... so any ideas why it is doing this and if there is just simply some sort of command i can use to force it to do a wipe, using ODIN or the toolkit, or something else? if so, i'd need some help getting it right, thats for sure
i also am using my phone to tether my computer, as we don't have internet at home for this month, so i really kind of need to know if something SHOULD work or if it is just a shot in the dark, beause if it is a shot in the dark and it fails and i can't get my phone booted again, then i can't even get on the net to post info and get more help.... i'll be screwed and i just realized that my boss wanted to call me in the morning, i thought he was calling friday morning not tomrw

asaqwert said:
before i do this, i'm just wondering if you have any idea why it might be acting this way? i just feel like i'm going to have the same kind of trouble i just had with this rom, as it was obviously having issues with wiping the data partition and/or another area.... i just don't want to muck about too much and end up with a brick... so any ideas why it is doing this and if there is just simply some sort of command i can use to force it to do a wipe, using ODIN or the toolkit, or something else? if so, i'd need some help getting it right, thats for sure
i also am using my phone to tether my computer, as we don't have internet at home for this month, so i really kind of need to know if something SHOULD work or if it is just a shot in the dark, beause if it is a shot in the dark and it fails and i can't get my phone booted again, then i can't even get on the net to post info and get more help.... i'll be screwed and i just realized that my boss wanted to call me in the morning, i thought he was calling friday morning not tomrw
Click to expand...
Click to collapse
The only thing I can think of right now is that you tried to flash some custom kernel or rom which
was not compatible with the phone if this is the case then that's what started the problem.
If the above is true then I would try to flash the STOCK kernel without trying to WIPE anything.
Here is the STOCK kernel you can flash in TWRP or CWM: http://dl.xda-developers.com/attach.../51821620/1/4/3/4/1/6/1/T999UVALH2-Kernel.zip
Try flashing this stock kernel first, if it does not help I would go ahead and ODIN flash the un-rooted stock firmware.
As long as you can get into download mode your phone is NOT bricked.
Good luck!

Did you try verifying the checksum?

First, yea checksum is all good
, that kernel won't download it just says error 410 - gone
other links?
,Honestly, I don't feel it is anything to do with the kernel...I think that something has changed some setting to do with the data partition or something
you do a factory reset/ wipe, what exactly does the phone wipe? Can I do this manually with adb or something? If so, how? Sorry to ask for this kind of help but I'm at my wits end, I'm honestly just about to lose it, the other reason I wanted to flash wicked 9.1 is that my phone was getting slow and unusable something was going on with it....I'm honestly almost in tears with this as I can't afford to buy anything right now and I need my phone to work for work, or I can't make ANY money, so right now I'm screwed. I've never had anything even similar to this happen before
Please help me get this back to working....as it is it is unusable and laggy to they point where I can't do much of anything....I'm actually at Tim Horton's on their Wi-Fi with my laptop trying to get it to work because my phone is so messed up

Factory reset wipes your data partition. And I guess some other things. What was it you tried to Odin? Was it stock UVDLJC? Try both Odin versions in my signature, as some people have had issues with the newer one.
I recommend trying that. Because if that doesn't work, my money is on hardware failure.

Aerowinder said:
Factory reset wipes your data partition. And I guess some other things. What was it you tried to Odin? Was it stock UVDLJC? Try both Odin versions in my signature, as some people have had issues with the newer one.
I recommend trying that. Because if that doesn't work, my money is on hardware failure.
Click to expand...
Click to collapse
Well I'm trying to flash basically anything that might help me be able to wipe my phone so that I can either go back to stock and warranty the phone if there are legit problems with the hardware, or what is more likely is that there is just some file that got corrupted and is forcing the phone to reboot when I try to wipe. In that car I just want to be able to wipe and install wicked 9.1.
Dos anyone have a working link to the stock kernel? The link provided above does not work
And are there any other ideas? I just find it hard to believe that there is a hardware failure when the phone has been working fine, just getting a little laggy, and honestly I just wanted to upgrade to the new wicked Rom....I just find it very hard to imagine that a hardware issue is causing me to not be able to wipe but I can still use the phone normally in every other way
Again, is there a way to manually wipe using adb ro some other program? If so how, and what exactly do I wipe and what do I leave alone? I've managed to copy everything I want to save over from my phone so I should be ok to format whatever I need to
Please help! And thanks again and thanks in advance
Oh and by ghee way Odin will let me flash a new recovery, it is only when I try to flash one of the two stock roms that were linked above that it errors out....I haven't tried anything else with Odin yet, not really sure how
I flash a normal Rom file with Odin? How so?

Aerowinder said:
Factory reset wipes your data partition. And I guess some other things. What was it you tried to Odin? Was it stock UVDLJC? Try both Odin versions in my signature, as some people have had issues with the newer one.
I recommend trying that. Because if that doesn't work, my money is on hardware failure.
Click to expand...
Click to collapse
oh and when i go to the link for the older version of odin that is in your sig, it says that it can't find it....any help there?

this is what i got with the Odin 1.85 that i got from your sig... i got it working, was something in my hosts file blocking access to the site... my bad there
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T999UVDLJA.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
any ideas?
also, on the phone screen itself, it says the following:
ODIN MODE
PRODUCT NAME: SGH-T999V
CUSTOM BINARY DOWNLOAD: Yes (5 Counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: ENABLE
SECURE CHECK FAIL: aboot
so any ideas what the crap is going on?

So do you have a t999 or a t999v?
You can access the proper t999v firmware from my signature.

s3 shutting off on its own and rebooting =/

So this problem just started today and came out of no where without any precursors. Worse thing is away from home working in the middle of nowhere in New Mexico without any real Tmo stores in the 5 hour vicinity.
My phone pretty much vibrates and turns on when battery is put in. Sometimes it will boot up, sometimes it wont. And when it does boot up, it will easily shut off or stay on for 10 minutes at the most.Tried a few other batts, but same thing. i even reflashed frosty rom and same thing.
I called tmo and they're working on sending me a phone as it is apparent that its a hardware issue- however it won't help my dependence on this phone as it I rely on it for work and daily duties.
I'm rooted via samsung toolkit and running frosty JB. I completely forgot how to revert back to stock as I am also using custom recovery from toolkit. Any direction? Also, will Tmo care if I leave the flashcounter untouched?

Yes they care if the flash counter is touched . use the search button or Google how to revert back to stock with 0 flash counter ..
Sent from my SGH-T999 using xda premium

can i just triangle away -> reflash stock recover thru odin via toolkit -> flash stock boot image via toolkit ....and done?

liberalswine said:
can i just triangle away -> reflash stock recover thru odin via toolkit -> flash stock boot image via toolkit ....and done?
Click to expand...
Click to collapse
heres the tutorial http://forum.xda-developers.com/showthread.php?t=2136921

ok why not go back to nandroid? its not a hardware issue there must be some kind of bugs

re: step by step info.
liberalswine said:
So this problem just started today and came out of no where without any precursors. Worse thing is away from home working in the middle of nowhere in New Mexico without any real Tmo stores in the 5 hour vicinity.
My phone pretty much vibrates and turns on when battery is put in. Sometimes it will boot up, sometimes it wont. And when it does boot up, it will easily shut off or stay on for 10 minutes at the most.Tried a few other batts, but same thing. i even reflashed frosty rom and same thing.
I called tmo and they're working on sending me a phone as it is apparent that its a hardware issue- however it won't help my dependence on this phone as it I rely on it for work and daily duties.
I'm rooted via samsung toolkit and running frosty JB. I completely forgot how to revert back to stock as I am also using custom recovery from toolkit. Any direction? Also, will Tmo care if I leave the flashcounter untouched?
Click to expand...
Click to collapse
If you can get the phone into download mode here is a sure fix for it, if you have a windows computer handy you
will need to use that OR you can go to the play store and download "mobile odin" and flash the stock rooted T999
rom without the need for any computers at all.
This guide will get your phone back up and running properly, doing anything else will just prolong your problem.
Easy and sure way to fix error 7 and other issues or problems - Here is the step by step guide:
After doing this you will end up with a stock-pre-rooted T999 Tmobile Touchwiz 4.1.2 rom which works properly.
You will not loose any of your pictures, videos or music by doing this.
Download the newest pre-rooted Samsung Galaxy S3 T999 Jellybean v4.1.2 rom: T999_UVDMD5
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!

umm, well i was able to setup and root the new phone that came in.
However, i'm having issues loading the stock .tar file I downloaded through Odin and receive this message:
<OSM> All threads completed. (succeed 0 / failed 0)
I also was unable to flash stock recovery file via odin and received the same message. Any thoughts?

re: Odin flash
liberalswine said:
umm, well i was able to setup and root the new phone that came in.
However, i'm having issues loading the stock .tar file I downloaded through Odin and receive this message:
<OSM> All threads completed. (succeed 0 / failed 0)
I also was unable to flash stock recovery file via odin and received the same message. Any thoughts?
Click to expand...
Click to collapse
There are a lot of people who don't have a tmobile T999 phone but instead they have a I9300 I hope you are not one of those people.
Everything found here in this thread pertains to the T999 Tmobile S3 phones. (sorry about having to make this comment but I just had to)
Forget about flashing stock recovery file with ODIN that was not part of the step by step instructions.
Only follow the step by step or things may get more complicated.
Did the [COM:XX] light up green or yellow in Odin after you plugged it into the usb of the computer before you started the flash?
BE SURE YOUR PHONE IS A Galaxy S3 Tmobile T999 (or you might end up with a shiny brick).
Unplug the usb cable from the phone before anything else and do NOT change any of the default settings in Odin.
#1: Open Odin
#2: Put the TAR file into the PDA slot in Odin
#3: Put the phone into download mode
#4: Connect the usb cable from computer to the phone
#5: Be sure that the [COM:XX] lights up in Odin
#6: Start the flash and have patience it may take up to 10 minutes
Good luck!

I was able to get it connected after trying out several different USB ports as the main culprit. But now Odin has been stuck for an hour and a half...
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
I'm not sure if I should let it sit longer. It has been exactly one hour, 32 minutes. What to do...?

re: try this.
liberalswine said:
I was able to get it connected after trying out several different USB ports as the main culprit. But now Odin has been stuck for an hour and a half...
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
I'm not sure if I should let it sit longer. It has been exactly one hour, 32 minutes. What to do...?
Click to expand...
Click to collapse
It should not take any more than at most 10 minutes. No need to let it sit there not doing anything.
Perhaps the TAR file got corrupted during the extraction or perhaps for whatever reason the
actual download of the rom got corrupted during downloading.
If I were you I would re-download the T999 stock rooted rom again and start all over, be sure you delete the
download which you first downloaded as to not make a mistake and use the first download.
Be sure that your battery is charged, if the battery is too low it may not want to continue the Odin flash.
So turn off the phone and plug it into the WALL charger it will charge 20% faster than usb, let it charge
for at least 45 minutes before trying to flash again.
Good luck.

i'm trying once more. The download file seems legit. =/

You can also find the firmware and a lot of info in my thread. Link in sig.
Do you have kies installed? If so get rid of it. It screws with Odin.
Sent from my SGH-T999 using xda premium

Currently stuck in this process:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
its been about 12 minutes

It's been over 30 minutes again and this is beginning to frustrate me. Everything looks good, but Odin just seems unresponsive and doesn't get anywhere past the firmware installation. I've tried two different stock firmware downloads. One directly from the tutorial previously listed, and one updated through samsung toolkit. Not sure what's going on and I need to return this phone back to Tmo

That sounds like a problem a lot of people have when kies is installed. If you don't have it installed you may want to try reinstalling the latest usb drivers. Ill post the link in a few mins.
For now though, be patient and see if it fails out. Avoid interrupting the process unless absolutely necessary.
Sent from my SGH-T999 using xda premium

Just uninstalled kies though I'm not quite sure if it's culprit here. Re attempting, i hope this works otherwise I'm out of options to getting my phone back to stock in time.
Does any one know if tmo/samsung really checks the phone once my "defected" unit is sent back?

liberalswine said:
Just uninstalled kies though I'm not quite sure if it's culprit here. Re attempting, i hope this works otherwise I'm out of options to getting my phone back to stock in time.
Does any one know if tmo/samsung really checks the phone once my "defected" unit is sent back?
Click to expand...
Click to collapse
Kies also contains the USB drivers, so you will probably need to reload those.
Here is the link to my drivers folder. Latest version I have is 1.5.23.0.
http://androidfilehost.com/?a=show&w=files&flid=1368

re: Odin flash.
DocHoliday77 said:
Kies also contains the USB drivers, so you will probably need to reload those.
Here is the link to my drivers folder. Latest version I have is 1.5.23.0.
http://androidfilehost.com/?a=show&w=files&flid=1368
Click to expand...
Click to collapse
About 5-6 or so posts ago I told liberalswine to uninstall kies, reboot computer and I gave him the official samsung
link for the proper usb drivers, I am not sure if he already uninstalled kies and & installed the samsung usb drivers
and if he rebooted the computer one more time before trying to odin flash the stock-rooted T999 4.1.2 firmware.
It's really strange that he is having so much trouble flashing the firmware with Odin
unless the actual TAR file is corrupted in one way or another.
I already told him to re-download the firmware and try the odin flash again a couple hours ago.
Just thought to let you know.

re: don't understand the question
richadorsey4 said:
Do we need to uninstall the stock app to flash this
Click to expand...
Click to collapse
I would like to give you a informed answer, but your question lacks any specifics,
I just don't know exactly what you mean or are talking about, looking back at some
previous posts here I see nothing that pertains to uninstalling any apps.
Try to ask your questions with a lot more details so we can know what exactly are asking about.

Misterjunky said:
About 5-6 or so posts ago I told liberalswine to uninstall kies, reboot computer and I gave him the official samsung
link for the proper usb drivers, I am not sure if he already uninstalled kies and & installed the samsung usb drivers
and if he rebooted the computer one more time before trying to odin flash the stock-rooted T999 4.1.2 firmware.
It's really strange that he is having so much trouble flashing the firmware with Odin
unless the actual TAR file is corrupted in one way or another.
I already told him to re-download the firmware and try the odin flash again a couple hours ago.
Just thought to let you know.
Click to expand...
Click to collapse
Any official FW will have an md5sum that Odin will check. If using anything else its wise to always check the md5 on dev-host or AFH and make sure what you download matches.
As for drivers, Sammy doesnt release the usb drivers as a standalone install, only with kies. Never found them anyway. Also forgot to mention, that link you posted is bad, so you may want to recheck it.
Sent from my SGH-T999 using xda premium

[Q] Never Rooted - Soft Bricked

Looking back I cant recall ever updating this phone's OS or Baseband. But yet I read all over the place that Samsung and Sprint like to automatically update at random.
A few months back when 4.4.2 came out I noticed that my phone decided to automatically update itself and the moment it rebooted all hell broke loose. All the phone would do is boot showing the "Samsung" logo than the "Galaxy S3" logo right after. The phone would reboot itself right away than it would boot the exact same way, this time locking up on the "Galaxy S3" logo. The whole time also vibrating.
I am unable to boot into recovery mode, volume up + home button + power button. At the top left corner of the "Samsung" screen it shows "booting recovery" then immediately goes right to the "Galaxy S3" screen and reboots again.
I am able to boot to download mode, volume down + home button + power.
So far I have tried using ODIN's v3.09/3.07 to load stock firmware's for the original 4.0.4, 4.3, and just in case it actually updated 4.4.2. Every time I try to load them through ODIN I get...
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sbl2.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Write)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is where I'm stuck and at a loss. From what I have been reading all over XDA, as long as I can still boot to download mode I still have a chance. I am really crossing my fingers here because being a Disabled Veteran I can't afford the money to get a new phone outside of my current contract time. And there is no way the wife and I can share the Note 3, lol.
-Semper Fi

Try a different cable or port... Those are usually the biggest causes of Odin failures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My ROM: WICKED X

bilgerryan said:
Try a different cable or port... Those are usually the biggest causes of Odin failures.
My ROM: WICKED X
Click to expand...
Click to collapse
AND DON'T TRY TO ODIN ANYTHING BUT 4.4.2!!!! YOU WILL BRICK YOUR PHONE COMPLETELY.
My ROM: WICKED X

Does the phone hard reset when in download mode too? If it does, your power button may be stuck D:

DirtTrash said:
So far I have tried using ODIN's v3.09/3.07 to load stock firmware's for the original 4.0.4, 4.3, and just in case it actually updated 4.4.2.
This is where I'm stuck and at a loss. From what I have been reading all over XDA, as long as I can still boot to download mode I still have a chance. I am really crossing my fingers here because being a Disabled Veteran I can't afford the money to get a new phone outside of my current contract time. And there is no way the wife and I can share the Note 3, lol.
-Semper Fi
Click to expand...
Click to collapse
@bilgerryan thank you for saying it lol he got really lucky that it didn't go through, if you can tell by what i quoted from this guy...he already tried to Odining lower than 4.4.2....he said he read all over XDA so he should have come across us saying don't flash below 4.4.2.....

No, the power button isn't stuck. And remember me stating that the phone had NEVER been rooted. And from what Samsung told me the phone hadn't been updated to 4.4.2 yet so that's why previous versions were attempted. They came to that conclusion from me telling them what the Download Mode screen showed.
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
QUALCOMM SECUREBOOT: ENABLE
And that's all that shows. Nothing about KNOX or any counters that they said would have appeared if the phone had been updated with, I think they said, 4.3 or 4.4.2. So, from the information I gathered from them is the phone supposedly has an older version still installed.
And thank you very much for chiming in bilgerryan . Your thoughts and concerns have been noted and are appreciated. And 6th_Hokage...if I had the links to where I read the many posts stating to try the other versions I'd post them here for you. The posts did reiterate what Samsung had stated regarding being able to attempt flashing multiple versions. BTW, these are all stock Samsung packages I'm using to flash via ODIN.
So, I was able to successfully install 4.1.2 last night and the phone booted up without any issues. The phone was back to the original state at which it was purchased, aside from not being 4.0.4. Then the strangest thing happened, I installed a few applications from the Play Store and the phone started acting up again. It rebooted twice on its own then went back to the home screen...odd. Then I noticed the phone tried automatically updating again, just like what originally happened last time. And now its back to the EXACT state it was. And again, attempts at reinstalling 4.1.2 were unsuccessful. Note, I am still able to success download mode.
Anything at all out there??
And please, save the thread a post if you're just going to reiterate something someone else already stated. And still, from what I'm reading here throughout XDA is that I'm now S.O.L. because I can still boot to Download Mode. Thanks in advance.

DirtTrash said:
And 6th_Hokage...if I had the links to where I read the many posts stating to try the other versions I'd post them here for you. The posts did reiterate what Samsung had stated regarding being able to attempt flashing multiple versions. BTW, these are all stock Samsung packages I'm using to flash via ODIN.
U do have the posts. On 11/29/13 jdelano reaponded to a very similar post fro u, with this advice...
"You'd only be taking a risk trying to ODIN 4.1.2 (MD4) to your phone at this point. If the 4.3 bootloader made it on, then trying that will totally brick your phone to the point that they have to replace it."
Doesn't matter if they're stock. Flash an older version over a newer version and u might be looking at a paperweight.
Are u running odin as admin?
Did u try different usb ports/cables like bilgerryan said? Personally i only use usb ports off the back of my pc (cause they're hard-wired to the mb).
Did u make sure that the drivers are all installed correctly? Did u try to update them or reinstall them?
Do u have kies on ur pc?
Did u check the md5 if ur download?
Understand ur frustration,but don't be dissing 6th_hokage. Ever. Goes out of his way to help people in the forums...
Sent from my SPH-L710, using Tapatalk 2 Cyan. ND8. Rooted and rom'd with WICKED-X (HELLS YA!)
Click to expand...
Click to collapse

No "dissing",, and thx for your post. Odd how like minds seem to think the same thing.
Yes, running ODIN as Admin
Tried every USB port after I read bilgerryan's post
All drivers are installed correctly on my system
I have tried it with and without KIES on my system
MD5 was checked and verified
Nothing wrong with my computer. Modified ASUS G75VW. And it helps that I'm a Computer/Network Engineer, so all my systems are always in pristine condition and up-to-date.