hey all, I know there is quite a few threads about the broken headphone jack issue, my left earbud wouldn't work in my phone but worked in my laptop, iPod etc.. so I ordered the replacement part and replaced it... yet the left earbud still doesn't work.. Anyone know what the issue could be or do I just have a loose wire maybe?
Thank you for any help.
Hey people, I was wondering if anyone has had the faulty headphones issue. After a few days, my headphones stopped working properly, there was a lot of static and they need to be pushed and held towards the screen to function again. This is going on with 3 pairs so it's a phone fault.Maybe all the tech savvy experts here can chime in and propose something.
Thanks!
I have the exact same issue since yesterday... I already tried to clean the headphone jack with no effect so far.
I will unscrew the device and have a closer look at the headphone jack when I find time. Probably not today.
shadowseed said:
I have the exact same issue since yesterday... I already tried to clean the headphone jack with no effect so far.
I will unscrew the device and have a closer look at the headphone jack when I find time. Probably not today.
Click to expand...
Click to collapse
I was thinking of taking it to a local repair shop around here in the weekend. Whoever finds a solution first I guess. Also I have noticed this visi0nary. de/ ?p=30 (I can't post links yet). I think it looks similar
therealtry said:
I was thinking of taking it to a local repair shop around here in the weekend. Whoever finds a solution first I guess. Also I have noticed this visi0nary. de/ ?p=30 (I can't post links yet). I think it looks similar
Click to expand...
Click to collapse
Sadly it's not the same problem visi0nary describes on his blog. The Mass contact is fine.
I had the phone open for a few minutes and it seems like all contact wrap thight around the plug. I guess the problem is a broken soldered point at the back of the circuit board.
I had no time to remove the board completly and check the back.
Maybe you can ask your repair shop guy what he did to fix it? Thanks.
shadowseed said:
Sadly it's not the same problem visi0nary describes on his blog. The Mass contact is fine.
I had the phone open for a few minutes and it seems like all contact wrap thight around the plug. I guess the problem is a broken soldered point at the back of the circuit board.
I had no time to remove the board completly and check the back.
Maybe you can ask your repair shop guy what he did to fix it? Thanks.
Click to expand...
Click to collapse
Hey shadowseed,
I took it to a couple of guys in downtown Athens and none said they wanna take a look at an Elephone. And these were techie Asian guys lol. Let me know if you find anything via pm or through here. Thanks. I'll keep looking myself otherwise I'll buy bluetooth headphones.
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Put some solder on every point now. That fixed the problems for me, looked like there was no solder there.
Same on my phone >.< seems that the headphone jack has been horribly designed/built then!
The design is excellent, but there are multiple points with no solder on top, just glued or something. That can obviously not work in the long term.. The fix is very easy if you have a soldering iron, you don't need precision tools.
Hello
I have the same problem. I've bought it a few days ago (it has not one month).
What can I do? This phone is warranted?
Thanks,
Diego
shadowseed said:
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Click to expand...
Click to collapse
Could you please give us a detailed tutorial on how to open up the elephone?
I've tried it today (got the same problem) and failed on removing the white case from the fingerprint scanner.
You can see here: KlickKlack
I've tried soldering the points today and the connection seems more stable for now.
No more bzzing in idle when using headphones (Teufel Aureol), but the quality still sounds like some bad compressed mp3.
Pushing the plug (display frontfacing) to the back left seems to fix the problem.
I've tried putting cardboard between the 3.5mm port and the casing of the phone but no luck.
When using in-ears (some cheap philips) there is still a semi-loud bzzing in the backgroud and since the cable goes sideways there is no way of getting a stable connction.
Did I do faulty soldering or might I've broken the port with the soldering iron?
puu(.)sh/ltJDW/ea70467ca2.JPG - Image 1 (Note: I already resolded the point that seems unstable.)
puu(.)sh/ltJNx/08d0ead27a.JPG - Image 2
shadowseed said:
the problem with bluetooth headphones is that Elephone set the Bluetooth A2DP Bitpool to 35 (basically means compressed data = better range and quicker transfer rate ) which results in terrible sound quality over Bluetooth audio.
I'm not an audiophile but I can't listen to music over bluetooth in my car like I used to with my previous device, it sounds horrible.
This is a software issue but it can't be fixed with a root app or something like this, it's set in the bluetooth drivers. There is a setting under "Sounds & Notifications" called "Lossless BT-Mode", but it does nothing... or not enough, I'm not sure. The Bitpool needs to be raised to 52 or higher for "lossless" mp3 playback.
I wouldn't have bought this phone if I had known this...
UPDATE: I fixed it. This soldering point broke. I didn't solder it, I put a piece of cardboard under the circuit board which presses against the shell. I did this yesterday in the afternoon and used it multiple times since then, it seems to work great.
Click to expand...
Click to collapse
Thanks!!!
i'm in the business too, since two days, bought a bt dongle, with eragon rom no bad sound issue, but the asycronious in videos of sound and lips movement is bad, so i have to solder...i need an iron, tomorrow i will try, i hope i will fix it. what about warranty??
thanks for the solutions
I don't care much for warranty on a china phone...
I had the problem that the right in ear speaker didn't work but the left one was okay. But after some time even the left got worse and wasn't usable anymore.
Then I opened the Elephone and soldered the parts of the audio jack (like in the picture above).
It improved the audio quality but it still works only for the left speaker. How do I get both working?
schakalakka said:
I had the problem that the right in ear speaker didn't work but the left one was okay. But after some time even the left got worse and wasn't usable anymore.
Then I opened the Elephone and soldered the parts of the audio jack (like in the picture above).
It improved the audio quality but it still works only for the left speaker. How do I get both working?
Click to expand...
Click to collapse
I'm facing the same issue, soldered all the contacts and then only left is working.
Did you solve this?
Romeo76 said:
I'm facing the same issue, soldered all the contacts and then only left is working.
Did you solve this?
Click to expand...
Click to collapse
Unfortunately it is still the same.
Well looks like im sticking to bluetooth headphones, was hoping someone would confirm the soldering would fix it.
Hi hello all new to the forum hope i get along with most of you here xda, right my headphone jack it kinda stopped working like 3 weeks ago was searching everywhere to find the solution. but most threads where old or without a follow up, so it works on one side only so i bought an oem headphone jack on ebay and installed today but the problems persist so what do you guys thin it is? Oh btw the phone has never been dropped or anything like that thx.
Its the headphones not the phone buy new earphones try them ... Factory reset the phone
Hi all,
My headphone socked stopped working properly and was only coming out of one ear so I went online and ordered another one, fitted it and then after a month or so it stopped working too. I complained to them and they sent me a replacement one but this one didn't work from the start. It doesn't even make the kind of 'click' noise that the headphones usually make when clicking into place.
I am thinking to order a new one but I am just wondering, is there anything actually wrong with the headphone sockets or is it just a case of it sliding out of place somewhat or the little spring type connectors being bent down or something.
Has anyone actually just repaired theirs and not ordered a new socket? If so, what did you do?
Thanks
nnila said:
Hi all,
My headphone socked stopped working properly and was only coming out of one ear so I went online and ordered another one, fitted it and then after a month or so it stopped working too. I complained to them and they sent me a replacement one but this one didn't work from the start. It doesn't even make the kind of 'click' noise that the headphones usually make when clicking into place.
I am thinking to order a new one but I am just wondering, is there anything actually wrong with the headphone sockets or is it just a case of it sliding out of place somewhat or the little spring type connectors being bent down or something.
Has anyone actually just repaired theirs and not ordered a new socket? If so, what did you do?
Thanks
Click to expand...
Click to collapse
First of all don't buy any other headphones try to lend headphones from friend or family that are working and they can confirm they're work...
next try to clean headphone jack with isopropylealcohol like in this video (before cleaning just pull out battery just for safety, after cleaning give it some time to dry out, it's really important)
https://www.youtube.com/watch?v=hZL9MFKJQec
and test it and you'll see, if there will be still same problem your jack connector is gone and need repair
I had the phone in my pocket with the headphone jack stick out while doing a job, must have bent over too far and caused the jack to come loose or something inside. At first sound would start going off intermittently, but now I'm only getting sound from 1 earbud - I have a few spare Nexus 5 jacks - are they the same as the N5X ones? I've already bought a replacement N5X jack from ebay anyway because I don't want to have to open the phone up more than once. Anyone else had issues with the jack?
I just hope a simple replacement of the port will fix it.
I replaced the ones on my Nexus 5 a couple times (aswell as swapping the whole PCBs over to a new screen etc, so i'm not afraid of opening it up, the internals look pretty much identical looking at this guide here: https://www.ifixit.com/Guide/Nexus+5+Headphone+Jack+Replacement/73195
Thanks in advance.