Ota 4.2 link here yakju tell me if it is right - Samsung Galaxy Nexus

Here the logcat
http://imgur.com/WV4zD
http://android.clients.google.com/p....signed-yakju-JOP40C-from-JZO54K.fdf06e8d.zip

Can anyone verify?
Sent from my Galaxy Nexus using xda premium

Just tried it, doesnt work. (In Canada)

I'm in Italy it makes any difference

Make sure you tipe the link right as I have not a pc I gave you a screen shot

http://android.clients.google.com/p....signed-yakju-JOP40C-from-JZO54K.fdf06e8d.zip

Thanks so my link is ok nice to see I contributed

adrynalyne said:
http://android.clients.google.com/p....signed-yakju-JOP40C-from-JZO54K.fdf06e8d.zip
Click to expand...
Click to collapse
Thank you. This works.
Sorry, I must've typed the link wrong earlier.

gunzblaze007 said:
Thank you. This works.
Sorry, I must've typed the link wrong earlier.
Click to expand...
Click to collapse
Its really easy to mistake O's for 0's and so forth in the screencap.

I am on 4.1.2 rooted and with cwm, can I flash this through cwm?

qandrav said:
I am on 4.1.2 rooted and with cwm, can I flash this through cwm?
Click to expand...
Click to collapse
this is the official ota update, it should work only on stock recovery/kernel/rom

A different recovery shouldn't matter.

Tried now rooted with 4.1.2 in Cwm and it works. The remember to let Cwm fix root and recovery on reboot

Related

I know wrong area

So Im running Sprint Lovers ROM and I just got a update.. 3.30.651.3... which is different than 3.30.651.2... I downloaded it but how do I get it to XDA?
jdawg0024 said:
So Im running Sprint Lovers ROM and I just got a update.. 3.30.651.3... which is different than 3.30.651.2... I downloaded it but how do I get it to XDA?
Click to expand...
Click to collapse
are you rooted? because if you are, that shouldnt have happened. you cannot get OTA's when you are rooted. unless its to their voicemail application but not to their roms.
oshizzle1991 said:
are you rooted? because if you are, that shouldnt have happened. you cannot get OTA's when you are rooted. unless its to their voicemail application but not to their roms.
Click to expand...
Click to collapse
I am ROOTED and I did just get an OTA Update... How do I post a pic?
There Take a look
You know its the wrong area, yet you posted anyways....
Someone over at Sprint Users mentioned an update getting pushed out on the 11th...
See here
VinceOB said:
You know its the wrong area, yet you posted anyways....
Click to expand...
Click to collapse
Trying to get an OTA update from sprint to XDA even though its a small file... it still might help... sorry..
Bump for more info!
NYCguy2020 said:
Bump for more info!
Click to expand...
Click to collapse
It looks like it's the same camera fix update for the older Evos that the newer 0004 hardware versions received recently...
Any idea how to get the update to install for root users? (tried to install twice unsuccessfully).
i got an "installation aborted" message!
Same... thing.. reboots to recovery and them errors out
Sent from my Super EVO!!
Devs will add it to there roms soon
Sent from my PC36100 using XDA App
jdawg0024 said:
Same... thing.. reboots to recovery and them errors out
Sent from my Super EVO!!
Click to expand...
Click to collapse
Yup,same here!
Are you using stock recovery for flashing? If I recall with s-off you needed to use a stock recovery to install any sprint updates?
wildgillis said:
Are you using stock recovery for flashing? If I recall with s-off you needed to use a stock recovery to install any sprint updates?
Click to expand...
Click to collapse
I'm running a custom recovery(Amon Ra).how do i get the stock recovery??!
thnx.
NYCguy2020 said:
I'm running a custom recovery(Amon Ra).how do i get the stock recovery??!
thnx.
Click to expand...
Click to collapse
by unrooting
u can go ahead and download the ota. itll either download to /cache or to /sdcard/downloads. if u down load it just dont apply it. once u have it downloaded just delete it from the directory it was in.
If you guys are trying to do an OTA update and it actually lets you, then you will lose ROOT, just so ya know....
You can download it without installing it.
Can someone post the update package to see what files changed?

Jelly bean OTA won't work on my GSM Galaxy Nexus IMM76I...

I had the yakjuxw and flashed it to yakju. I received the past OTA updates just fine, but when I received the message saying there's a new update for my phone, I went ahead and downloaded the 130Mb -140Mb size update and when it asked to restart my phone, it installed maybe a third of the way and the the little android went on his back and "collapsed" and I had to take out the battery to restart my phone. I tried it again and the same thing happened.
What could be wrong? :crying:
Thanks for the help guys.
When you flashed to yakju, did you also flash the proper radio and bootloader?
martonikaj said:
When you flashed to yakju, did you also flash the proper radio and bootloader?
Click to expand...
Click to collapse
I don't know, I tried to post the link of the steps I fount on the internet but I couldn't because of the noob limitations.
I need 7 more posts -_-
freduke said:
I don't know, I tried to post the link of the steps I fount on the internet but I couldn't because of the noob limitations.
I need 7 more posts -_-
Click to expand...
Click to collapse
In order for the OTA to work properly you have to have stock recovery, radio, bootloader, and system files. You can't have modified anything except an unlocked bootloader.
martonikaj said:
In order for the OTA to work properly you have to have stock recovery, radio, bootloader, and system files. You can't have modified anything except an unlocked bootloader.
Click to expand...
Click to collapse
so what you're saying is I have to re flash yakju?
I restore my phone to factory settings first?
I had yakjuxw also, it comes with a different radio. flashing to yakju (or takju) is not enough. you have to flash the radio also. look for efrant's post in how to do it and get it, it's in these forums, that's what I followed.
http://forum.xda-developers.com/showthread.php?t=1626895
sorry, just re-read the question, what you describe happened to me when I deleted the recovery folder from the update file. The unmodified file updated fine. But then you have to root and install clockwork recovery again, which is fairly easy too.
Another issue I had prior to that was when I tried to flash the update and I didn't realize that the file didn't finish copying to the phone. check file size it should be around 147mb I think. I hope one of these tips help!
freduke said:
I had the yakjuxw and flashed it to yakju. I received the past OTA updates just fine, but when I received the message saying there's a new update for my phone, I went ahead and downloaded the 130Mb -140Mb size update and when it asked to restart my phone, it installed maybe a third of the way and the the little android went on his back and "collapsed" and I had to take out the battery to restart my phone. I tried it again and the same thing happened.
What could be wrong? :crying:
Thanks for the help guys.
Click to expand...
Click to collapse
That is because you do not have the XXLA2 radio installed. The last update did NOT update the radio, so it didn't check to see if you had the XXLA2 radio installed and, hence, did not fail.
I had exactly the same problem, however as everyone is saying; Just flash the xxla2 radio again and the problem is solved!
Sent from my Galaxy Nexus using xda app-developers app
Sime3134 said:
I had exactly the same problem, however as everyone is saying; Just flash the xxla2 radio again and the problem is solved!
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
my phone isn't rooted by the way, if that makes a difference.
sounds easy, any steps that I could follow?
freduke said:
my phone isn't rooted by the way, if that makes a difference.
sounds easy, any steps that I could follow?
Click to expand...
Click to collapse
It doesn't. If you've got an unlocked bootloader, just flash the radio via Fastboot.
martonikaj said:
It doesn't. If you've got an unlocked bootloader, just flash the radio via Fastboot.
Click to expand...
Click to collapse
Im in fastboot via CMD in the cd C:\yakju-imm76d-factory-c6e807a1\yakju-imm76d folder... care to tell me what to type to flash the radio?
freduke said:
Im in fastboot via CMD in the cd C:\yakju-imm76d-factory-c6e807a1\yakju-imm76d folder... care to tell me what to type to flash the radio?
Click to expand...
Click to collapse
I'm not in front of a PC now, so I don't remember the name of the radio, but the command is:
fastboot flash radio <name-of-radio>.img
Sent from my Galaxy Nexus using Tapatalk 2
freduke said:
Im in fastboot via CMD in the cd C:\yakju-imm76d-factory-c6e807a1\yakju-imm76d folder... care to tell me what to type to flash the radio?
Click to expand...
Click to collapse
Here's a manual guide for flashing from Efrant: http://forum.xda-developers.com/showthread.php?t=1626895
Read the guide and follow Section D., Number 7) to flash the radio.
efrant said:
I'm not in front of a PC now, so I don't remember the name of the radio, but the command is:
fastboot flash radio <name-of-radio>.img
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
alright awesome, do I have to do anything else or can I start my phone now?
freduke said:
alright awesome, do I have to do anything else or can I start my phone now?
Click to expand...
Click to collapse
Start!
Sent from my Galaxy Nexus using Tapatalk 2
efrant said:
Start!
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
AWESOME!!! thanks for helping guys :good::good:
freduke said:
AWESOME!!! thanks for helping guys :good::good:
Click to expand...
Click to collapse
no prob.
I could send you a link to the description when I get home in some hours. And no it doesn't matter if your phone is rooted.
Sent from my Galaxy Nexus using xda app-developers app
Oh, problem already solved. Didn't notice Well, hope it works now!
Sent from my Galaxy Nexus using xda app-developers app

Help - Softbricked Phone

Phone will not fully boot after flashing a rom, and not being able to restore my nandroidbackup any help?
T3hBraveBoss said:
Phone will not fully boot after flashing a rom, and not being able to restore my nandroidbackup any help?
Click to expand...
Click to collapse
Can you get into download mode?
T3hBraveBoss said:
Phone will not fully boot after flashing a rom, and not being able to restore my nandroidbackup any help?
Click to expand...
Click to collapse
When I did this, I had to ODIN the stock .tar file back on to fix it. I could still get into download mode, but not CWM
Go here and get ODIN(if you don't already have it)
http://forum.xda-developers.com/showthread.php?t=1722686
Go here for your stock ROM(I hope you remember which you were on)
EDIT - you're on a Canadian model, not sure if the stock file is the same as the AT&T version but if it is
http://forum.xda-developers.com/showthread.php?t=1737848
When I did it, all my apps and everything was still there, but I had to redo the root and reinstall CWM again.
nest75068 said:
When I did this, I had to ODIN the stock .tar file back on to fix it. I could still get into download mode, but not CWM
Go here and get ODIN(if you don't already have it)
http://forum.xda-developers.com/showthread.php?t=1722686
Go here for your stock ROM(I hope you remember which you were on)
EDIT - you're on BELL
When I did it, all my apps and everything was still there, but I had to redo the root and reinstall CWM again.
Click to expand...
Click to collapse
I can go into clockworkmod recovery, and when I attemped to restore from my back up it fails
T3hBraveBoss said:
I can go into clockworkmod recovery, and when I attemped to restore from my back up it fails
Click to expand...
Click to collapse
The only thing I can assume is you have a bad backup. I would recommend starting over then
nest75068 said:
The only thing I can assume is you have a bad backup. I would recommend starting over then
Click to expand...
Click to collapse
I think its becuase when I flashed the rom the kernel changed
so what do I do at this moment
T3hBraveBoss said:
I think its becuase when I flashed the rom the kernel changed
so what do I do at this moment
Click to expand...
Click to collapse
Go back to stock, find your stock .tar firmware and install through ODIN
nest75068 said:
Go back to stock, find your stock .tar firmware and install through ODIN
Click to expand...
Click to collapse
like the same file i used to root my phone?
T3hBraveBoss said:
like the same file i used to root my phone?
Click to expand...
Click to collapse
No, the firmware straight from Samsung, the original firmware that the phone shipped with.
nest75068 said:
No, the firmware straight from Samsung, the original firmware that the phone shipped with.
Click to expand...
Click to collapse
can you link me towards it
T3hBraveBoss said:
can you link me towards it
Click to expand...
Click to collapse
You should be able to find it on samsung-updates. Here is a link.
http://samsung-updates.com/device/?id=SGH-I747M
T3hBraveBoss said:
can you link me towards it
Click to expand...
Click to collapse
Wht is your model #?
See what happens when you multi task at work while trying to read post on XDA hahaha, just realized you can't go to settings.
Look under the battery at your model #. I feel like a tool just now.
nest75068 said:
Wht is your model #?
See what happens when you multi task at work while trying to read post on XDA hahaha, just realized you can't go to settings.
Look under the battery at your model #. I feel like a tool just now.
Click to expand...
Click to collapse
I found it, I am downloading the stock rom for i747m
this would be the proper guide per say
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-att-galaxy-s3-sgh-i747/
T3hBraveBoss said:
I found it, I am downloading the stock rom for i747m
this would be the proper guide per say
http://galaxys3root.com/galaxy-s3-unroot/how-to-unroot-att-galaxy-s3-sgh-i747/
Click to expand...
Click to collapse
:good:
Yep those are the steps
nest75068 said:
:good:
Yep those are the steps
Click to expand...
Click to collapse
yeah, i fixed everything restored with my nandroid backup. not flashing roms anymore... I dont think its worth the trouble
T3hBraveBoss said:
yeah, i fixed everything restored with my nandroid backup. not flashing roms anymore... I dont think its worth the trouble
Click to expand...
Click to collapse
I just switched over from iOS and found the guides on here were easy to follow and didn't have any issues . Getting the right downloads is probably the key
And what do you mean by "Phone will not fully boot after flashing a rom" How far does it go when booting and what happens?
Just boot screen doesn't fully boot
Sent from my SGH-I747M using xda app-developers app
T3hBraveBoss said:
yeah, i fixed everything restored with my nandroid backup. not flashing roms anymore... I dont think its worth the trouble
Click to expand...
Click to collapse
It is worth the trouble if...
A. You know what you are doing.
B. You read and research.
C. You know how to recover in the event something goes wrong.
Flashing isn't for everyone. Even if you follow directions things can still go wrong in rare situations. That's just the nature of flashing.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Keep getting (Status 7)...

Every time I try to install CM 10 on my phone, it just says:
assertfailed: getprop("ro.product.device") == "d2att" || getprop ("ro.build.product") == "d2att" E: Error in /sdcard/cm-10-20120810-UNOFFICIAL-d2att.zip
(Status 7)
Click to expand...
Click to collapse
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
DavGerm4 said:
Every time I try to install CM 10 on my phone, it just says:
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
Click to expand...
Click to collapse
Change the updater script....
Sent from my SAMSUNG-SGH-I747 using xda premium
DavGerm4 said:
Every time I try to install CM 10 on my phone, it just says:
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
Click to expand...
Click to collapse
You need to install the propery recovery on your phone. I'll see if I can get you a link
http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.4.7-d2att.img
howtomen said:
Change the updater script....
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
And how do I change the updater script?
DavGerm4 said:
And how do I change the updater script?
Click to expand...
Click to collapse
Install the official CWM recovery then you don't have to worry about that
malinois16 said:
Install the official CWM recovery then you don't have to worry about that
Click to expand...
Click to collapse
Where does the img go so that CWM can see it on my phone? Or do I boot into CWM and update it that way?
Did you change the build.prop for the Google Wallet work around? Change it back, everything should work again.
malinois16 said:
You need to install the propery recovery on your phone. I'll see if I can get you a link
Click to expand...
Click to collapse
That got it working! Thanks for the help! Thanks everyone!
n00b question of the day.
What exactly do you do with that .img file?
Same thing happened to me, exactly, download ROM manager and flash the newest CWM, that should fix it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Ok I figured it out and everything is working fine! I'm now running CM 10!
I wasn't familiar with using .img files and terminal emulator. But with a little help from here http://forum.xda-developers.com/showthread.php?t=1739426 I solved my problem!
Thanks mrhaley30705 for pointing me in the right direction.
Thank You Everybody
skinny18 said:
Ok I figured it out and everything is working fine! I'm now running CM 10!
I wasn't familiar with using .img files and terminal emulator. But with a little help from here http://forum.xda-developers.com/showthread.php?t=1739426 I solved my problem!
Thanks mrhaley30705 for pointing me in the right direction.
Click to expand...
Click to collapse
I was having the same problem but like a user in the earlier post said "Simply download the Rom Manager and Flash the recovery for your model" all problems will be solved regarding "Status 7" error. Thank You
DavGerm4 said:
Every time I try to install CM 10 on my phone, it just says:
I've re-downloaded, reverted back to stock and rooted again, done that like twice now, still no go. Last week I was able to do the custom ROM's installs, but then they just stopped working?
Sorry for being a total noob here, but I really wanted to get this working!
Thanks for the help!
On a Galaxy S3 AT&T
Click to expand...
Click to collapse
I had this problem last night myself...turns out it was due to the version of CWM recovery I was running, which was v5.4.x.x, IIRC. I used adb to install the latest version of CWM, v.6.0.x.x IIRC and reattempted the flash and it worked fine.
noob question, but since CM10 doesn't have a Rogers version, are you using the AT&T one?
thanks!!
Thanks to everyone who posted about the d2tt.img recovery...it finally soved that problem.
Thank You!
irish.iolar said:
Same thing happened to me, exactly, download ROM manager and flash the newest CWM, that should fix it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Just updated the CWM to the touch one and that's it!!! Works like a charm, running paranoidkandroid...:good:
irish.iolar said:
Same thing happened to me, exactly, download ROM manager and flash the newest CWM, that should fix it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ummmm bit of a noob question but how do we do that
Druter said:
Ummmm bit of a noob question but how do we do that
Click to expand...
Click to collapse
Go to the app store, download Rom manager and update recovery.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

[Q] CW. 6.0.4.3 or TWRP 2.6.3.1

Hi there!
I tried to flash CWM recovery 6.0.4.3 (rom manager) either from the app itself, and with odin. In both cases, the update didn't work. I flash over and over again, but the version stuck at 5.xxxx. Then I tried to flash the TWRP 2.6.3.1, but my phone stuck in a recovery boot loop. Don't worry! I did a nandroid before and been able to flash back my rom. Is anyone has any ideas why I'm not able to flash the update? I'm running dirty unicorn rom, on a samsung sgh-t999v (videotron canada). I try to flash the kitkat update, but I need to do the CWM update first.
Thank you!
Where are you getting the files from?
DocHoliday77 said:
Where are you getting the files from?
Click to expand...
Click to collapse
In both cases, I tried the update from the app. I also tried a zip file, that I changed to .tar, from internet, but I don't remember where.
You can try the ones in my sig if you like
DocHoliday77 said:
You can try the ones in my sig if you like
Click to expand...
Click to collapse
ok, noob question, but what is SIG?!
I'd like to give'em a try! where can I find them?
Just want to make sure, is T-Mobil could work with videotron version? Videotron is SGH-T999V
Than you!
DocHoliday77 said:
You can try the ones in my sig if you like
Click to expand...
Click to collapse
His signature bro, right under his name. View on browser.
Sent from my SGH-T999 using xda app-developers app
daxecutioner24 said:
His signature bro, right under his name. View on browser.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Oh sorry! didn't know that! french spoken language here, don't have thse kind of abreviations!
thank you!
DocHoliday77 said:
You can try the ones in my sig if you like
Click to expand...
Click to collapse
ok, I tried your file, and it worked!! Is it normal that in recovery, I'm in 6.0.4.3 and in my cell phone (normal mode) I'm in 5.XXXX!?
Thank you so much!!

Categories

Resources