Hi,
I have an ELM327 interface but with usb conection. I have a micro usb cabel so i can connect it to HTC Desire but i dosn't work with Torque Pro. Can anyone help? tnx
Related
Hi All!
I have made a cable to connect the MDA III to my Royaltek RGM 2000 GPS device.
It works great but I don't understand one thing:
The documentation on this site says that MDAIII has rs232 interface (+-12V),
the documenation of the RGM 2000 says it only drives a TTL serial port.
I connected both device directly without a MAXIM IC.
How can that work?
Now I try to connect the GPS device to my PC over a MAXIM TTL to RS232 converter and I get only trash on my PC terminal.
Should I also connect the GPS device directly to serial port of my PC?
Please help!
I don't want the crash my GPS device!
Hi!
Is it posible to use the phone as a USB GPS when connected to a computer?
PK
Hi Paalkr,
I don't know for USB link, but there is a freeware which transform the PPC into a BT GPS : http://www.pocketpcfreeware.com/en/index.php?soft=1488
Hi
Thanks for the tip... Maybe GPSgate can be used to redirect GPS signals (NMEA) to the USB port.
PK
got the unit without the cradle , and usb cable, i managed to make a usb cable from a lg connector and it work well.
the problems : igo8 does not find the internal gps module and i cannot connect to wi-fi networks, i find thye networks but cannot connect.
i try to update to wm6 or reflash wm5 but the pc installer won't work without external power. the phone charges trough usb , but the application ask's for wall adapter plugged in. I tried to trick the phone by making him see a charger using the connector circuit found on pinouts.ru bun doesn't doo the trick .
does someone have a cradle internal schematic , or there is a workaround on updating the pda ? thank's in advance
please help me
nobody has any ideea on how to workaround that protection ? so i could instal wm 6 without the wall charger ?
Hi all, I have a car radio with an USB connector. It works well with sense ROM, well recognized as an USB drive, but is not working with the cyanogen ROMs, answering to me "Unit Error" when connecting the USB cable...
Can you help me ?
Thanks
Nico
I have BU-353 USB GPS Navigation Receiver (GlobalSat). It is wired GPS USB antenna.
I am curious if it's possible to connect it to my TP2 phone mini-USB port (through USB to mini-USB connector)?
If it is possible, what port it will use? The internal GPS uses COM4.