Hi,
I have a strange problem and I really don't know how to solve it.
The problem is related to the sound when ringing.
If I set the "sound and vibrate" checkbox in Sounds, then the phone rings and vibrate a little and then stop the sound.
The screen still show the incoming call and the caller still hear that the phone is ringing.
The ring sound sometimes stop immediately after it's starting, sometimes ring 1, 2, 3 ... times.
BUT, if I unchecked the "sound and vibrate", the phone ring normally, as long as the caller keep the call open.
Does anyone met the same strange behavior?
The ROM is stock 4.1.1 XXALIJ, rooted with CF-auto-root.
At this moment I don't have any sound manager / profile manager installed.
I tried also to clear cache from recovery, but nothing.
What could be the cause?
What can I try to make it acting as it should?
Regards,
Stefan
I hope it is not affected by any motion settings, i.e you are covering the screen with your palm or turn it over?
If you are asking if I'm covering the phone with my hand, or if I'm turning it WHEN it's ringing, the answer is NO
But if you are asking if I have these options checked in settings, the answer is YES. I have them checked.
Sent from my GT-N7100 using xda premium
Related
Is there a separate setting where I can turn only the notification to vibrate while leaving the phone ringtone on? I receive emails at middle of the night and it always wakes me up. At the same time, I do want incoming calls to wake me up.
Another issue. when I previously switched the phone from vibrate to sound in the notification drawer, it would make a beep noise. But today it doesn't make that sound anymore. Did i disable something somewhere?
Get Silent Time Lite on the market. Allows you to set times to quiet the phone but allow exceptions for the phone. So you can set it to ring for only contacts you highlight.
No idea about your second issue.
....
maxspiderx said:
Another issue. when I previously switched the phone from vibrate to sound in the notification drawer, it would make a beep noise. But today it doesn't make that sound anymore. Did i disable something somewhere?
Click to expand...
Click to collapse
Settings > Sounds > Volume > System.
Maybe you put the system sounds volume down?? Hope this helps
I have put the system volume all the way up. The sound came back the day before, and I cannot get it to play again last night after I turned it from vibrate to ring.
Mine did that for a little while too. Fixed itself eventually.
Hey Guys, i have a question, my nexus is ringing when i have it set to silent mode.
The ring is not the normal ringtone.. when the call is received, there is a short ringing sound, the LED flashes and then it goes silent. all texts/emails are silent in silent mode its just phone calls show that ring-ring then go silent.
I am stock/rooted. Im not really sure what is going on here..
Any ideas? i looked through all the setting on the phone and couldnt find anything related to this.
Thanks so much for any help
Are you using any profile switching applications or apps that change your sound levels? I used to get this on my Droid sometimes when using a profile switching app. The app would say I was silent, and my volume levels were down, but on an incoming sound from twitter would still make it through, like the app didn't respond fast enough.
Problem: Instead of playing the selected ringtone when I get phone calls I hear the bonk sound hear when I adjust my volume? This remains even after reboot.
Solution: It was an application called CallBlocker. I had enabled a setting called Pre-Mute Ring which was causing the issue.
Call controll does work very well, however this feature does have a caveat indicating it might not work correctly on all phones. I think the purpose is to mute the ring until it can identify if the call is on the blacklist or not. After that, I think it's supposed to unmute so you can hear the ring.
I finally figured it out after numerous reboots and a kernel upgrade. The problem remained so I figured it had to be some piece of software that messed with the call settings.
Sent from my SPH-D710 using Tapatalk 2
I've been trying to make it so my phone goes silent at a certain time, and then removes the silent after the 'certain time' has expired. This has not been a problem.
The issue is that I still want specific phone numbers to make it through should I receive an emergency call. I used the Profile -> Phone, Incoming Call - to trigger and this works fine. However, there seems to be nothing I can do to force the phone to ring. I've tried removing silent mode, and it does, but the phone still won't ring until the next call. I've also tried lowering volumes and raising on phone call, same result. The closest I've become is to play my ringer tone as a ringer using Task -> Media, Play Ringtone. The downside is the phone will absolutely NOT stop ringing. It does when you pick up the phone but continues after you hang up, well past the ringtones duration. Calling Stop Task doesn't work, nor can I find a stop audio action.
I'm hoping someone has a good solution to this as I couldn't find one through lots of searching and trying. I wouldn't mind having to use a terminal command to stop audio if possible but I couldn't find any information on that either.
Any help is appreciated.
Just going to bump this once in hopes someone can figure out a solution. Thanks.
OK so I figured if I set my phone volume to vibrate only, like I typically do when I'm in a meeting or at a Dr appointment, that my watch would also change to vibrate only, but it doesn't appear to do so because my watch still rings if I receive a call. Anyone else have this issue? If I set my phone to Do Not Disturb, then it silences my watch, but that also disables vibration which I do not want. I know I can also go into the watch menu and disable sound that way, but I just thought it was suppose to mirror the phone settings.
What about selecting "Sound on/off" from the drop down menu on the watch?
zumstin said:
What about selecting "Sound on/off" from the drop down menu on the watch?
Click to expand...
Click to collapse
Thanks for the suggestion. Unfortunately, I have already tried that. It just turns off sounds on the watch and not on the phone.
Sorry to revive a dead thread... going to bump here. But did you ever figure this out? Anyone? Thanks. =)
I was about to start a new thread about this when I found this one. I also want my watch to ring when my phone does and not when my phone is muted. I attend a few events a week where everyone's phone must be muted. I imagine that do not disturb mode would work, but I use vibrate only so I'll at least feel when I get notifications.
If I'm reading this Google article right, this should be possible and automatic: https://support.google.com/androidwear/answer/6056843?hl=en