I've been trying to make it so my phone goes silent at a certain time, and then removes the silent after the 'certain time' has expired. This has not been a problem.
The issue is that I still want specific phone numbers to make it through should I receive an emergency call. I used the Profile -> Phone, Incoming Call - to trigger and this works fine. However, there seems to be nothing I can do to force the phone to ring. I've tried removing silent mode, and it does, but the phone still won't ring until the next call. I've also tried lowering volumes and raising on phone call, same result. The closest I've become is to play my ringer tone as a ringer using Task -> Media, Play Ringtone. The downside is the phone will absolutely NOT stop ringing. It does when you pick up the phone but continues after you hang up, well past the ringtones duration. Calling Stop Task doesn't work, nor can I find a stop audio action.
I'm hoping someone has a good solution to this as I couldn't find one through lots of searching and trying. I wouldn't mind having to use a terminal command to stop audio if possible but I couldn't find any information on that either.
Any help is appreciated.
Just going to bump this once in hopes someone can figure out a solution. Thanks.
Related
I've had a O2 XDA Orbit for about 3 months now without any problems, but it seems to devloped a strange fautl today.
This morning (around 7am) the alarm went off as usual, but come about 10 when I tried to make a phone call the call was placed but I could not hear the other person (and she could not hear me). I checked out the phone and noticed that both volume sliders where set to off, changing them and I still could not get any sound out of the device.
In Settings Sounds & Notifications when I press the play button theres no sound, and trying the built in sound/video/midi results in no sound.
Oddly when someone calls, I changed the ring tone to an mp3 wich will play, but again I cant hear the caller, or they hear me.
I've done a soft reboot, with no help, before I tired a hard reset I was wondering if anyone else had any ideas?
I'm having exactly the same problem. If anyone has any advice regarding this I'd be greatly apperciated!
Hey Guys, i have a question, my nexus is ringing when i have it set to silent mode.
The ring is not the normal ringtone.. when the call is received, there is a short ringing sound, the LED flashes and then it goes silent. all texts/emails are silent in silent mode its just phone calls show that ring-ring then go silent.
I am stock/rooted. Im not really sure what is going on here..
Any ideas? i looked through all the setting on the phone and couldnt find anything related to this.
Thanks so much for any help
Are you using any profile switching applications or apps that change your sound levels? I used to get this on my Droid sometimes when using a profile switching app. The app would say I was silent, and my volume levels were down, but on an incoming sound from twitter would still make it through, like the app didn't respond fast enough.
Problem: Instead of playing the selected ringtone when I get phone calls I hear the bonk sound hear when I adjust my volume? This remains even after reboot.
Solution: It was an application called CallBlocker. I had enabled a setting called Pre-Mute Ring which was causing the issue.
Call controll does work very well, however this feature does have a caveat indicating it might not work correctly on all phones. I think the purpose is to mute the ring until it can identify if the call is on the blacklist or not. After that, I think it's supposed to unmute so you can hear the ring.
I finally figured it out after numerous reboots and a kernel upgrade. The problem remained so I figured it had to be some piece of software that messed with the call settings.
Sent from my SPH-D710 using Tapatalk 2
I would like my phone to ring loudly when certain contacts call.
I have tried AutoRing. Tried using Tasker profile from http://tasker.wikidot.com/alwaysringonimportantcontact
Nothing seems to work at all. The phone rings but no sound. If my (Tasker) profile switches off silent/vibrate mode at 7am, then ringtone volume works fine. It's only when I'm in silent/vibrate mode that volume does not increase/go loud for the specific contact.
It appears to be happening on SGS devices. My auto ring/whitelist never rang loud when I had an SGS3 either.
Has anyone successfully been able to have their phone ring loudly from a specific contact with their TMo SGS4?
I'm stumped! Help...please!
IconBoy said:
I would like my phone to ring loudly when certain contacts call.
I have tried AutoRing. Tried using Tasker profile from http://tasker.wikidot.com/alwaysringonimportantcontact
Nothing seems to work at all. The phone rings but no sound. If my (Tasker) profile switches off silent/vibrate mode at 7am, then ringtone volume works fine. It's only when I'm in silent/vibrate mode that volume does not increase/go loud for the specific contact.
It appears to be happening on SGS devices. My auto ring/whitelist never rang loud when I had an SGS3 either.
Has anyone successfully been able to have their phone ring loudly from a specific contact with their TMo SGS4?
I'm stumped! Help...please!
Click to expand...
Click to collapse
How about if you put a custom ringtone on for the specific contacts you want, and just make that ringtown a louder MP3?
You can even use the same ringtone as everyone else, but make a new file that has the levels turned up. Take the current ringtown, put it on your computer, raise the volume and resave it as ringtone2.mp3 and then apply that louder version to the specifc contacts.
It's a more circuitous route, but if the easier stuff isn't working it's worth a shot.
Hello
Is there any way to silence a call using the watch? I am not talking about rejecting the call, just to turn off the ringer.
It can be done by pressing the vol/power button on the phone but I cant find how to do it on watch.
quick google couldnt give me the answer, hope you guys know any way to acheive this
You can look at the app "Ringtone Remote" in Google Play. I haven't tried it, but it seems to be able to do what you want. It is also free!
When you cover the watch with a open palm, the watch will turn black and the phone will become silent and the call will continue to ring silently
Nice, didn't know that. It actually did work... the first time. When I test it the second time the call on the watch gets muted but the phone keeps on ringing, even though it did work the first time I tested.
thanks it works. But i dont get a 100% success rate. But it still works
Wear Mini Launcher, https://play.google.com/store/apps/details?id=com.npi.wearminilauncher. It has a Widgets screen that controls multiple things on the phone, including allowing you to toggle speaker on, mute, or vibrate... from the watch.
I would also like to be able to touch one of the icons on the watch face that I am using to immediately mute the watches' speaker. That would solve your request and mine also. Thanks