Continue thread from here http://forum.xda-developers.com/showthread.php?t=1835285
Please read that before you continue here
Reason for this new thread is that I have taken over from Llor to maintain
those builds now.
CM10 Issues thread
http://forum.xda-developers.com/showthread.php?t=1821783
BOOT IMAGE IS IN THE ZIP
So extract boot.img from the zip BEFORE flashing the ROM and
flash it using fastboot or AIO
This is HELLBOY 201212011716
If there are any kernel updates needed "asynchron" to the ROM updates
I will write this here. So DONT use a different kernel by default
Download:
http://goo.im/devs/maxwen/CM10-primou
Or use GooManager app (you need to have 20121111 build installed)
gapps 20121011
http://www.mediafire.com/?k2cb1trw8s2oio2
Konwn issues - only what I can reproduce:
-panorama mode artifacts
-Continious-AF in video mode dont work very well
------------------------------------------------------------------------------------------------------
ChangeLog 2012/12/08:
-removed camera animation - I am tiered of beeing asked about it
-added sys.keep_apps=com.android.mms,com.android.contacts by default
-fix for VOIP/SIP microphone mute
-updated to latest CM10 sources
------------------------------------------------------------------------------------------------------
ChangeLog 2012/11/28:
-fixed graphical glitch that happens sometimes - e.g. after booting
-added sys.keep_apps property support to keep apps in memory
this should hopefully solve the dreaded "loosing" mms problem.
But I would keep SMS Ghost installed for now just to make sure
To use it add a line to you build.props e.g.
Code:
sys.keep_apps=com.android.mms,com.android.contacts
or for a single app only
Code:
sys.keep_apps=com.android.mms
Requires reboot!
Please keep in mind that flashing a new version will overwrite those changes
so you have to do it again afterwards
-added hwui blacklist support http://review.cyanogenmod.org/#/c/19249/
see also here for more details http://forum.xda-developers.com/showthread.php?t=2014099
To enable add the following line to your build.props
Code:
hwui.use.blacklist=true
AND you must use kernel 201211242348
Requires reboot!
Please keep in mind that flashing a new version will overwrite those changes
so you have to do it again afterwards
There is a new app HwsSettings where you can easily specifiy for which
apps it should be done http://forum.xda-developers.com/showthread.php?t=1766576
-decreased screen turn on time
-updated to latest CM10 sources
------------------------------------------------------------------------------------------------------
ChangeLog 2012/11/22:
-swap script added by default - if you dont want it delete it
-fixed color effect for video recording
-fixed thumbnail creation for videos
-fixed custom button backlight handling - please keep in
mind that our HW is not really capable of doing button backlight
dimming levels so actually there is only off=0 and on!=0
-screen OFF CRT animation - dont ask for on animation
-updated to latest CM10 sources
EDIT: use HELLBOY 201211231230 if you experience screen flickering
during unlock
------------------------------------------------------------------------------------------------------
ChangeLog 2012/11/15:
-working zram (you need BOTH latest kernel AND latest ROM)
-(more) camera fixes
-updated to latest CM10 sources
Nice and first! Thanks for your work!
nice one maxwen. you pushed those patches for camera in? i didn't had the chance to try them..
deleted
I didn't have a software installed much, so I always full wiped and fresh install. All seem fine for me.
Btw, any threads from dev is best from their dev man kind. I love all threads here.
great job~! thank maxwen~
Now I'm on Llior's 4/11. Do I need to wipe data & everything before update to this 12/11/15 version? Or just simple update from cwm?
Bambalazs said:
What is the update method? Full wipe and flashing rom and gapps, or just flashing rom without wipe? Kernel is the latest hellboy, so I don't need to flash it.
Thank you.
Anyway this thread is better than the other one. :good:
Click to expand...
Click to collapse
There is only ONE warning!!!
Those kind of posts belong NOT in this thread but in the corresponding
CM10 thread in the General section
I am a little bit nicer then Lloir in this case and will just ignore them
But - If you stay ignorant this thread will be closed for your posts too
So you can decide
max
1ceb0x said:
nice one maxwen. you pushed those patches for camera in? i didn't had the chance to try them..
Click to expand...
Click to collapse
It includes all "know" patches plus the 2 gerrit commits I have
already told you- Those have not been merged at the moment so
you need to cherry-pick them for now
Sorry. It won't happen again.
The ROM is amazing. Everything works well.
Just one problem. (In Auto Brightness mode) When I go to Display - Automatic Backlight - Use Custom & Edit other levels. And when I change the Buttons values. Either to 0 or any other value. I see no change in the capacitive buttons.
Is it safe to restore data of cm9 backup using twrp? will it be fine? i dont wanna set my phone again to the way i like
harsh.ea said:
Is it safe to restore data of cm9 backup using twrp? will it be fine? i dont wanna set my phone again to the way i like
Click to expand...
Click to collapse
never tried so you will be on your own trying
Sent from my One V using xda app-developers app
maxwen said:
never tried so you will be on your own trying
Sent from my One V using xda app-developers app
Click to expand...
Click to collapse
Did it when moving from stock to myONEv. Worked fine then
GamingFreak said:
The ROM is amazing. Everything works well.
Just one problem. (In Auto Brightness mode) When I go to Display - Automatic Backlight - Use Custom & Edit other levels. And when I change the Buttons values. Either to 0 or any other value. I see no change in the capacitive buttons.
Click to expand...
Click to collapse
never played with those TBH
will have a look
Sent from my One V using xda app-developers app
Ohk. Never mind that. Otherwise the ROM is amazing.
there seem to be some problem. Home button not working and recent app switcher not working too. I changed it properly from HARDWARE KEYS
harsh.ea said:
there seem to be some problem. Home button not working and recent app switcher not working too. I changed it properly from HARDWARE KEYS
Click to expand...
Click to collapse
Post the issue along with the logcat on CM10 issue thread. This is dev only.
GamingFreak said:
The ROM is amazing. Everything works well.
Just one problem. (In Auto Brightness mode) When I go to Display - Automatic Backlight - Use Custom & Edit other levels. And when I change the Buttons values. Either to 0 or any other value. I see no change in the capacitive buttons.
Click to expand...
Click to collapse
Ok just checked:
Well there is a bug
Its always using the screen brightness value instead of the
button brightness value. Need to check if I can fix this
No lock screen animation
Sent from my One V using xda app-developers app
Related
UPDATE/IMPORTANT/README 1ST
I am giving away the SGS and got a new SGS2. This means I won't be able to test updates on this kernel, this I will DISCONTINUE it soon.
I might update this kernel til i'm unable to (in a week prolly) so i'd suggest to switch over to another kernel, choices are, to my knowledge:
- zach's kernel: lots of tweaks, but people seems to have good results. its based on my kernel
- glitch's kernel: less tweaks but close, higher oc. its also based on my kernel
- cm7's stock kernel: i'm based on them of course, its the same as my kernel minus oc/uv and voodoo, but if you want something simple and stable without caring for oc/uv or voodoo color it's pretty good because it's reliable. voodoo sound works via voodoo +
Note that I'm still hanging out on the CM7 sgs channels and will most likely contribute one way or another still
**********************************************************************
Fat visible download link http://kang.project-voodoo.org/
Disclaimer:
These kernels are provided as-is without any warranty. I'm not here to provide support etc although I might when I'm able, but don't count on it. If your phone explode, it's your problem. Updates are not guaranteed as well.
I made a thread only so that it doesn't get lost in spam and have pms asking where to find it
What's included
Sometimes: testing stuff from teamhacksung before it goes into their stable upstream
Various tweaks: such as JPX screen timings, Haptic feedback and general vibration intensity slightly reduced (integrated upstream)
Voodoo sound patch
Voodoo color patch
[*]Led notification: Now integrated upstream
[*]Extra governors: Smartass, Interactive They're not that good.
Overclock/Undervoltage: I use [email protected] and 1.2Ghz max and rest default, change voltage with "voltage control" (market). Default settings to 1Ghz.
Easy building system and clear commits: for other devs, and myself too lol
Click to expand...
Click to collapse
Credits & stuff:
Thanks to Supercurio for making those great enhancement patches and to the Teamhacksung/CMSGS/CM7 contributors for the CM project. Thanks to many other authors who put their source online, they're too many to name. No thanks to the ones who don't, tho
http://project-voodoo.org/
http://forum.cyanogenmod.com/forum/85-samsung-galaxy-s-experimental-mod/
Click to expand...
Click to collapse
Sources (includes non-GT-I-9000 kernels such as Captivate, Vibrant, etc. - always up to date within ~15min of binary upload depending on my upload speed):
https://github.com/kangsterizer/android_kernel_samsung
If there's anything you don't find in the source (missing source or w/e could ever happen, i'm only another noob human)/ doesn't look correct / you don't understand, don't be shy to ask
Binaries & CWMs (aka fat visible download link - what you're looking for ;-):
http://kang.project-voodoo.org
Other goodies
Netfilter/iptables fix: http://kang.project-voodoo.org/f/iptables-cm7-kang.zip
Nexus S windows USB driver (for SGS CM7) - just like to have the link handy for ADB:
https://dl-ssl.google.com/android/repository/usb_driver_r04-windows.zip
Unpack, go into the device manager, look for the "Nexus S" device, click update driver, have disk/search my computer, put the path to the directory..
Tool for OC/UV: http://forum.xda-developers.com/showthread.php?t=1018411
Some more links
IRC: irc://irc.freenode.org/#project-voodoo irc://irc.freenode.org/#cmsgsteam
Twitter: http://twitter.com/kangsterizer (not using it a lot.. but i'm trying lol)
Click to expand...
Click to collapse
Latest changes
-- r25
- upstream sync (use new cm7 nightly!)
--r12
- upstream sync (camera stuff) (use new cm7 nightly)
--r10
- upstream sync (fix battery info/display)
-- CM7_GT-I9000_kernel_kang_20110504_r9_update.zip
- upstream sync
- some fixes for new recovery
-- CM7_GT-I9000_kernel_kang_20110504_r5_update.zip
- upstream sync
-- CM7_GT-I9000_kernel_kang_20110501_r2_update.zip
- test of new scripts x)
- fixed said new scripts since test failed x)
-- CM7_GT-I9000_kernel_kang_20110501_r1_update.zip
- Supports GB 2.3.4 (upstream)
- Reviewed some code
- Removed governors: ondemand is better in their current state anyway
- using "r" release versionning in case i'm uploading more than 1 kernel per hour or make tests etc.. avoids confusion ;-)
-- CM7_GT-I9000_kernel_kang_20110429_18_update.zip
- allocate more memory to FIMC0 / fixes googles goggles FC
-- CM7_GT-I9000_kernel_kang_20110428_23_update.zip
- upstream sync
- requires latest CM7 nightly for compass etc
- supports bml_over_mtd at flash time
-- CM7_GT-I9000_kernel_kang_20110427_02_update.zip
- upstream sync
- Voodoo sound v8
- some touchkey tweaks
-- CM7_GT-I9000_kernel_kang_20110409_17_update.zip
- upstream sync - untested release (don't have phone access this week )
Older changes are not displayed (lack of space) - see GIT for complete change log
Click to expand...
Click to collapse
NOTE: THESE ARE NOT OFFICIAL VOODOO (or CM7) KERNELS. THESE ARE TEST KERNELS INTEGRATING POSSIBLY UNSTABLE AND UNSUPPORTED VOODOO PATCHES
Fat visible download link http://kang.project-voodoo.org/
Support FAQ
Q: Do LED notification require an app, such as BLN, etc ?
A: No. It uses Android's and Cyanogen settings, other apps are not required, although some that are designed for regular LEDs may work.
Q: How to I turn off LED notifications, scheduled or/and complete turn off?
A: Use Cyanogen's Quiet Hours feature (settings>cyanogen>sound>quiet hours) and check "Dim the LEDs during quiet hours" (in reality it will turn them off on the SGS). If you schedule a complete day, then LED notifications will be off all the time.
Q: How do I setup per app, find other LED settings etc?
A: Settings>cyanogen>interface>LED notifications
Q: What to do with LED color settings?
A: We have only one color, so that doesn't work. Use Green as default setting. Some non-bright colors turn off notification, as it's the equivalent as diming LEDs (note that on real LEDs if you dim them too much they look like off too anyway, the difference is that it's gradual. On the SGS the LEDs can be only on or off, not gradual)
Q: How can I troubleshot my system, I can use ADB but...
A: adb logcat | grep lights (on linux) will show you Android requests to turn LED on or off. "status" tells you what we decide will be interpreted as "turn LED on" (1= on, 0 = off)
adb shell cat /proc/kmsg for live view (or adb shell dmesg if you're using adb after the issues occurs - careful the backlog is limited in size so don't be too slow)
notify_led_on and notify_led_off are requests to the kernel to turn LED on or off.
touch key write/read errors (cypress) are non-fatal failures to ask the touch key to do something (eg lit up the LED), when the hardware goes crazy or there's a logical error in the code (can be both)
touch key recovery routine or "stopped responding" are either hardware errors, either a logical error where the driver would try to write something the touchkey doesnt understand. in some occasion lock&unlock fix those as a work around, of course a permanent fix is required
Q: I used another kernel and some things don't work as expected / I'm the only one to have a problem / music skip with screen off / etc
A: Try this cleanup script: http://forum.xda-developers.com/showpost.php?p=13223426&postcount=1312
Features FAQ
Q: Why do you not implement jhash3?
A: This hash function is used in 3 places in the kernel, and mainly iptables. None of them are performance relevant unless you use your phone as router for a thousand of machines (and that is the *only* case). Yes, it is utterly useless.
Q: Why do you not implement XYZ?
A: Usually, same reason as jhash3. Feel free to suggest tho, some features are actually useful and I don't know everything.
It only work with CM7??? Or work in a Froyo or Gingerbread rom??
You just can't read?! CM7.
thx bilboa, it's really good
Keep up the good work
Sent from my Galaxy S using Tapatalk
Flashed cwm .zip getting force closes when trying to adjust headphone volume in voodoo app read about this on the cm7 thread might have something to do with 2.3.3 lol I got no idea, just throwing it out there you can throw it right back
EDIT: found the voodoo app on supercurios page http://dl.project-voodoo.org/apps/
Sent from my Galaxy S using XDA App
quadix said:
You just can't read?! CM7.
Click to expand...
Click to collapse
I read perfect, that's only a question, do you understand???
Medel-Silver said:
I read perfect, that's only a question, do you understand???
Click to expand...
Click to collapse
Its very stupid question, hence the a bit rude, yet truthful, answer. It says in the topic what this kernel is for.
I need to backup the WiFi modules before i get flash that?
Thanks a lot for posting this! Do you still have the "old" voodoo control app with you, that works with the headphone amplifier?
Thank you for providing the source code, that gives me an idea on what i have done wrong while implementing voodoo sound
btw have you guys experienced the volume bug mentioned here and here?
Anybody got a solution?
could not download
Sent from my Galaxy S using XDA App
Thanks heaps - installed it apparently ok - it runs the phone - the voodoo app can see the features and recognises that its a compatible kernal - but whenever trying to change the analogue volume - it force closes the app
is this relating to the broken git stuff for cyanogen - unrelated and just me doing something wrong - or its a bug and i can give you some logs or something to check whats happened?
I'll try doing a clean flash from an old firmware and come back again with the results in a few hours when i get home from work (err - probably shouldnt have tried experimenting with it at work - heh)
^^you need voodoo control app and voodoo app for it to get it to work.
@bilboa1
nice to see it's stand alone.
Edit : Crap, i can't get it to download, i've tried different browsers, using my phone. I even tried it from different computer with no luck
It seems github don't like my computer or my phone. Can anyone attach the .zip for i9000, PLEASE.
Hello, I'm from the Captivate forum, just seeing if any known bugs are found I heard Wi-Fi doesn't work.
Also had problems DL'ing. Attached the SGS i9000 file from the CM7_SGS_2011_03_04 folder. Thanks for the kernel!
sorry if this could be a dumb question, but I wanna be sure of what I'm doing:
If i use the CWM package, do I still need to flash te zImage and push the modules??
^^no need to, just flash it from recovery.
~drz
this is base on the latest kernel from the 02/03 update? it's will affect on the speed / smoothness (for bad)?
I think it was built from the latest commit.
just try it out man, if you don't like it, you can just flashed back to the "official" one.
The non-sgs kernel currently check for SGS model before flashing.. which of course won't work ;-) Ill change that when I get a little bit of spare time.
Since I know I have been slacking off on gingerbread stuff (and we still don't have nightly builds) here's an unofficial cm 7.2 build with lots of stuff that has been building up in gerrit:
Download Links:
ROM: http://goo.im/devs/aeroevan/cm7/update-cm-7.2.0-RC1-vivow-UNOFFICIAL-2012-05-04-signed.zip
Kernel: http://goo.im/devs/aeroevan/kernel/vivow/aeroevan_ICSv9-bfs.zip (should work with no issues)
GApps: part 1 and part 2
The ROM only has the default CM kernel.
Instructions:
Download all the things.
Reboot into recovery
Wipe all the things
Install ROM
Install part 1 of gapps
(Optional) Install part 2 gapps (for google talk video)
(Optional) Install my kernel
Changelog
On top of a sync to the latest CM7.2 code (as of 2012-04-24), the following changes have been included:
Added option to hide alarm icon in status bar:
- http://review.cyanogenmod.com/#/c/13799/
- http://review.cyanogenmod.com/#/c/13798/
Camera: Allow focus sound muting
- http://review.cyanogenmod.com/#/c/9457/
- http://review.cyanogenmod.com/#/c/9458/
- http://review.cyanogenmod.com/#/c/9459/
Fix typo in queue_property_triggers ident
- http://review.cyanogenmod.com/#/c/14603/
Backport from CM9 Basic KSM Support
- http://review.cyanogenmod.com/#/c/15031/
Overscroll color
- http://review.cyanogenmod.com/#/c/7148/
- http://review.cyanogenmod.com/#/c/7149/
- http://review.cyanogenmod.com/#/c/7166/
add option to disable volume key beep sounds
- http://review.cyanogenmod.com/#/c/8636/
- http://review.cyanogenmod.com/#/c/8635/
Add option to turn-off vibration on device shutdown
- http://review.cyanogenmod.com/#/c/14610/
- http://review.cyanogenmod.com/#/c/14611/
Lots of other changes:
- memcmp: prefetch optimizing for ARM Cortex-A8/A9 (http://review.cyanogenmod.com/#/c/12866/)
- Don't pay for filename/line number lookup unless you need to. (http://review.cyanogenmod.com/#/c/13403/)
- Don't malloc between fork and exec (http://review.cyanogenmod.com/#/c/13404/)
- cleanup redundant interfaces from iftable to avoid excessive LinearAlloc use (http://review.cyanogenmod.com/#/c/13405/)
- Redesign dlopen() locks to be recursive per thread (http://review.cyanogenmod.com/#/c/13407/)
- bm: cherry-pick one patch from freebsd to fix logb() denormals issue (http://review.cyanogenmod.com/#/c/13408/)
- Add optimized version of memcpy for Cortex A9 (http://review.cyanogenmod.com/#/c/13580/)
- Add optimized version of memset for Cortex A9 (http://review.cyanogenmod.com/#/c/13581/)
- Prevent deadlock when using fork (http://review.cyanogenmod.com/#/c/13582/)
- Undecoded jobject leaking in through attachThread (http://review.cyanogenmod.com/#/c/13583/)
- Don't use deleted Node object in setSizeScreenWidthAndScale (http://review.cyanogenmod.com/#/c/13588/)
- ipsec-tools: build racoon XAUTH client (http://review.cyanogenmod.com/#/c/13590/)
- libm: fix invalid result of function remquo/remquof (http://review.cyanogenmod.com/#/c/13756/)
- bionic: fixed the race condition in dlmalloc_usable_size() (http://review.cyanogenmod.com/#/c/13778/)
- Fix possible file descriptor leaking (http://review.cyanogenmod.com/#/c/13779/)
- Fix memory leaking in the VM (http://review.cyanogenmod.com/#/c/13780/)
- Fix file descriptor leak in read_num (http://review.cyanogenmod.com/#/c/13781/)
- fix memory leaking (http://review.cyanogenmod.com/#/c/13782/)
- free memory allocated by strdup (http://review.cyanogenmod.com/#/c/13783/)
- Restore fp after calling JNI method in allstubs interpreter (http://review.cyanogenmod.com/#/c/14012/)
- libcutils: Fix race issues in mspace_usable_size (http://review.cyanogenmod.com/#/c/14013/)
- Fix ash to read /etc/profile (http://review.cyanogenmod.com/#/c/14014/)
- watchprops would go to 100% CPU after processing first change (http://review.cyanogenmod.com/#/c/14015/)
- Modify Running ProcessView as ics (claimed to be better) (http://review.cyanogenmod.com/#/c/14402/)
- bionic: make static object initialization thread safe (http://review.cyanogenmod.com/#/c/14600/)
- Avoid method overriding if its super method is inaccessible. (http://review.cyanogenmod.com/#/c/14601/)
- Fixing a crash when doing lock profiling (http://review.cyanogenmod.com/#/c/14602/)
- Fix typo in queue_property_triggers ident (http://review.cyanogenmod.com/#/c/14603/)
- Busybox 1.20.0 squashed commit for gingerbread (http://review.cyanogenmod.com/#/c/15260/)
Oh yeah, and I backported rotating softkeys too
First! Thanks aero!! Definitely will check this out when I get home.
So, obligatory I am on the latest cm 7.2 nightly. Might I get away with not wiping?
I mean, those changes look substantial, so I'm guessing no.
Sent from my Incredible 2 using Tapatalk 2
Anybody know how to get MMS working?
Sent from my Incredible 2 using Tapatalk 2
devator22 said:
So, obligatory I am on the latest cm 7.2 nightly. Might I get away with not wiping?
I mean, those changes look substantial, so I'm guessing no.
Sent from my Incredible 2 using Tapatalk 2
Click to expand...
Click to collapse
As in the old nightly 134 or the 7.2RC1? Either way, a wipe is probably needed but if you are still on 134 (which is fairly old at this point) I would definitely recommend a wipe
putnum said:
Anybody know how to get MMS working?
Sent from my Incredible 2 using Tapatalk 2
Click to expand...
Click to collapse
MMS should work, but I didn't test that (I only did limited testing since I use CM9 as my DD).
Well I have not been able to use moms even on the official build. I can send pics but cannot receive.
Sent from my Incredible 2 using Tapatalk 2
Great job aeroevan works awesome so far, soft key lights still go out sometimes but easily fixed by changing brightness.
Sent from my Incredible 2 using Tapatalk 2 Beta-5
Something must be up with goo cause its not letting me download, it keeps timing out.
NM just had to keep reloading it.
Amazing list of changes. I will definitely try this out when the semester is over and I don't have to worry about needing my phone all the time
Thanks aeroevan! Flashed this over 7.2RC1 and everything seems to be working great. Thanks again.
Something strange.. Root apps work fine.. but ES File Explorer will not.. I've uninstalled and reinstalled ... but when I select to allow root exploring in settings I get the prompt and I allow root access, but then get a popup "test failed" ... root works fine but not with ES File Explorer... anyone else notice this?
jbarcus81 said:
Something strange.. Root apps work fine.. but ES File Explorer will not.. I've uninstalled and reinstalled ... but when I select to allow root exploring in settings I get the prompt and I allow root access, but then get a popup "test failed" ... root works fine but not with ES File Explorer... anyone else notice this?
Click to expand...
Click to collapse
Can you get a logcat of the error? It sounds like that app may do something strange in its test.
Sent from my Incredible 2 using XDA
aeroevan said:
Can you get a logcat of the error? It sounds like that app may do something strange in its test.
Sent from my Incredible 2 using XDA
Click to expand...
Click to collapse
I think this is it.. Soooo much in these logcats but I think I narrowed the problem down ...
PasteBin Link Logcat1
And just in case it's useful ... here is the whole logcat...
PasteBin Link Logcat2Whole
Been having lots of trouble with the softbutton light goin in and out after rotating on my girls Dinc2.
Sent From My Rooted Motorola DROID X2/MB870 Running CM-7.2.0-RC1.
DX2Trip said:
Been having lots of trouble with the softbutton light goin in and out after rotating on my girls Dinc2.
Sent From My Rooted Motorola DROID X2/MB870 Running CM-7.2.0-RC1.
Click to expand...
Click to collapse
I can confirm this bug. Softbutton lights will go in and out with rotation.
i've already got cm7.2 installed, how do i flash aeroevans kernel(cm9)with a unlocked bootloader s-on??? anyone. i tried to flash it when i had cm9 running and it messed up everything no wifi no 3g and i wiped cache and delvic
The download link is broken. Can anyone post a mirror?
Sent from my Incredible 2 using xda premium
sorry, realized that I was an idiot, and that this was GB
DX2Trip said:
Been having lots of trouble with the softbutton light goin in and out after rotating on my girls Dinc2.
Sent From My Rooted Motorola DROID X2/MB870 Running CM-7.2.0-RC1.
Click to expand...
Click to collapse
The soft key lights are a known issue, they do the same thing on cm9 and aokp changing the brightness turns them back on temporarily. Aero was kind enough to give us rotating soft keys for cm7 so I just work with it. Personally I just have the setting enabled to adjust brightness by sliding across the stays bar.
Sent from my Incredible 2 using Tapatalk 2 Beta-5
Trickster MOD app is a tweaking tool to change various settings included in your kernel and other tweaks to your phone. It was made by me and my friend.
Screenshots and more information at links below.
Links
Google Play Store
AndroidPIT
Donate
Website​If you like the app please rate it 5 stars and if you can, please donate.
Feature requests
Please post & vote features on our feedback site. So we can keep track of them
Bug Report
Please read the FAQ at our website before reporting any problem
If the FAQ does not help, use the Bug Report feature in our app & reference your ID here (the number in the mail subject).
Credits:
- Google
- Our great kernel devs
- grilledbacon for your beautiful icon
- Beta testers and translators for your contributions
- Anyone that helped us in some way
Disclaimer: This is provided with NO GUARANTY whatsoever. Use your common sense.
Reserved
I think I'll try it out on the weekend, cheers!
Good to see this finally here. I did some beta testing for you guys until my HOX had to go in for repair, finally just got it back and looking forward to using Trickster again
Thank you very much for this app..it is very handy and useful..
Testing it now
ShyamSasi said:
Testing it now
Click to expand...
Click to collapse
Is there any problem guy?
BTW, if you wanna join the private beta testing phase, please email us
thuanle said:
Is there any problem guy?
BTW, if you wanna join the private beta testing phase, please email us
Click to expand...
Click to collapse
Are you going to implement vibration intensity settings on this?
Please.
I will love you forever.
MemphisLeak said:
Are you going to implement vibration intensity settings on this?
Please.
I will love you forever.
Click to expand...
Click to collapse
That depends on whether there's kernel supporting this feature. Do you know of one?
I don't think it's possible to change vibration intensity on the HOX
bigeyes0x0 said:
That depends on whether there's kernel supporting this feature. Do you know of one?
Click to expand...
Click to collapse
Don't think I do. I assumed it was a feature on all kernels but was not configurable because of lack of demand. I distinctly remember going from sense rom to cm10 and noticing a large increase in vibration intensity from the capacitive buttons. I figured that since it is not configurable within android then it must be a feature within the kernel.
New version has been pushed to PlayStore. You're gonna receive the update soon.
Version 1.5.390 (20121029)
- Add ability set device hostname
- Add ability to backup/restore kernel modules in /system
- Add compression to kernel backups
- Add ability to force app language
- Add support all Qualcomm based GSIII
- Add ZRAM support
- Add Korean language
- Refresh app GUI if it's running when set-on-boot finishes
- Make the timeout longer so it's easier to attain root, especially at boot up (still have problem, use SuperSU)
- Fix all known bugs
Announcement:
- New version has been pushed to the market. Wait for the update.
- As the Set-on-boot delay feature has been quite stable, and to celebrate the 10k+ downloads of our apps :good:, this feature is enabled for all user. Hope you have more fun with TricksterMOD :victory:
Changelog of Version 1.6.423 (20121110)
- Set on boot delay is now enabled for all :highfive:
- Add Media Scanner Trigger
- Change working dialogs to persistent notification for better usability
- Optimize code & apk size
- Fix all known bugs
Can you help us spread the words? We don't use the Social network/FB much
Brilliant software
I'm trying this out now and it seems like a brilliant idea. I will provide any bug reports I encounter. Please revive this thread and carry on your work
ub3rx said:
I'm trying this out now and it seems like a brilliant idea. I will provide any bug reports I encounter. Please revive this thread and carry on your work
Click to expand...
Click to collapse
Yes, we are still on the way.
If you have any suggestion, poke us at http://trickstermod.uservoice.com/
Bug report: Does not save settings for reboot
I use cm10.1 b8 with xm kernel #167 and it does not restore any settings after reboot even if I choose it to do so. And yes...I donated.
Twist79 said:
I use cm10.1 b8 with xm kernel #167 and it does not restore any settings after reboot even if I choose it to do so. And yes...I donated.
Click to expand...
Click to collapse
Did you only apply the settings (top right corner) or did you also set on boot in menu? Applying the settings doesn't survive a reboot, only set on boot in menu does
It works perfectly for me on ViperX 3.3.7 with XM kernel #167.
Twist79 said:
I use cm10.1 b8 with xm kernel #167 and it does not restore any settings after reboot even if I choose it to do so. And yes...I donated.
Click to expand...
Click to collapse
Read the FAQ about set-on-boot.
https://trickstermod.uservoice.com/knowledgebase/articles/118579-faqs
If you still have problem, do a in-app bug report feature.
In your case, if you're still on Superuser then switch to SuperSU and try again, 95% set on boot problem can be fixed by doing this.
AW: [APP] Trickster MOD [Kernel Settings and Tweaks] [HOX Intl]
rkuijpers said:
Did you only apply the settings (top right corner) or did you also set on boot in menu? Applying the settings doesn't survive a reboot, only set on boot in menu does
It works perfectly for me on ViperX 3.3.7 with XM kernel #167.
Click to expand...
Click to collapse
Been there done that. Will try super su
Solved
I dont know if it was SuperSU or the last Update of Trickstermod but now it works and keeps the settings. Thanks!
History
Well I am a purist and seek for minimalism. I love stock android, but with certain modifications that i like for improvement in functionality. But the specific set of features i wanted in rom , i couldnt find it in a stock rom. So i decided to build one myself with everything i needed. I build for my nexus 4. I was building my rom for a friend of mine @pratheek1992 and thought could share my builds with you folks too.
Why ras_vanilla base ?
Simple, cause it has carlo's magic.
Features as of now
1. Volume rocker wake - always on without user configuration ( so that it looks stock ).
2. Built with 4.9 toolchain and -O3 Cant stress on how quick it is
3. Clear all button in the recents menu.
4. Advanced reboot menu and screenshot in power menu.
6. Rotation lock tile.
5. Lots of tweaks.
+ June 27 change log.
FLASH
latest TWRP is higly recomended
- full wipe if coming from a different rom, else skip this step
- wipe cache
- wipe dalvik cache
- flash zip
- flash gapps
- (opt.) flash kernel since it comes with stock
- reboot
- log into google and let it sync
- fix_permissions (in terminal if your kernel supports the script, else in recovery)
- (opt.) reboot
Link
July 05: - Milestone 1
http://mbqonxda.net/sandyachar/maguro/sandy_ota_2013-07-05.zip
July 09:
http://mbqonxda.net/sandyachar/maguro/sandy_ota_2013-07-09.zip
July 14:
http://mbqonxda.net/sandyachar/maguro/sandy_ota_2013-07-14.zip
July 14 , Build 2 :
http://mbqonxda.net/sandyachar/maguro/sandy_ota_2013-07-14_Build2.zip
Kernels
Any kernel should work just fine. I usually use just the stock kernel. But franco and Trinity kernels performed very well for me imo.
Thanks
AOSP - For android.
CM - Incredible amount work that they have put to make android so much more better.
@rascarlo - For one of the best best rom i have ever used. And for his sources.
@sparksco - For help when needed and Brilliant rom that is just unbelievably quick and fast. Please consider donating to this guy, he puts unbelievable amount of work on his tool chain and lets buy him a beer
If, customization is what you seek, either of their rom is an excellent choice.
All others who have helped me in their own way to make this happen. Thanks.
To @MBQ_ for the space in his server to host the roms so that you people have unthrottled and fast downloads, Thanks man. Please consider donating to him so that he doesnt have to spend money from his pocket to keep up the server.
Sources
Rascarlo : https://github.com/rascarlo
SaberMod : https://github.com/SaberMod
Mine : https://github.com/sandy-achar
Aosp
CM
Bugs
Report bugs, i ll try my best to sort it out.
For change logs.
June 27:
- Add T9 dialer.
- Advanced settings in phone for changing vibrate time , etc.
- Remove electron bean crt-screen off animation - No user configuration ( So that I dont add that in settings).
- Remove safe headset warning - No user configuration ( like above).
June 30:
- Added navbar height selection - in display
- Added battery percentage - in display
- Lot and lots of bug fixes and optimizations.
- Made Minimal gapps package and extras.
July 02
- Fixed navbar height bug.
- some more optimizations.
- Two gallaries while flashing 4.3_stuff over my gapps fixed.
July 05 - Milestone 1
- Reworked everything from scratch optimizing everything.
- Removed Navbar height for this build, still have to clean up some codes in it. Sorry
- So much more mem leak fixes and performance improvements.
- Removed my gapps and 4.3 package as its been nothing but hiccups to ruin the experience.
- Option to make volume rocker wake user configurable.
July 09:
- navbar height added back
- quick change in notification menu between toggles and tiles by swiping
July 14:
- Some bug fixes and optimizations
- Halo
July 14 - build 2:
- New vertical gestures for halo
- clear all and silence for halo
- PA`s statusbar icons cause i felt it looked better.
Use Carlo`s gaaps
http://fitsnugly.euroskank.com/?rom=rasbeanjelly&device=gapps
Removed LiveWallpapers:
http://d-h.st/CZ5
Nice! :laugh:
It will make it even greater if you add transparency settings (status bar and navbar) for a longer display life (due to screen burnin in those areas) and navbar dpi.
THX. Will try it
Holy sh*t! I was wondering when this waa coming!!!!! Will flash it tomorrow for SURE (after my exam )
Awesomeeee
Sent from my Nexus Prime
Congratz for your work and thanks for the sweet words
stuffynet said:
Nice! :laugh:
It will make it even greater if you add transparency settings (status bar and navbar) for a longer display life (due to screen burnin in those areas) and navbar dpi.
THX. Will try it
Click to expand...
Click to collapse
I am trying to keep it as stock as possible. Nav bar height may be.
Also try the rom with trinity or Franco.
Sent from my Nexus 4 using xda app-developers app
If you could add HALO, I'd love you forever lol
Thanks for this!
thegtfusion said:
Holy sh*t! I was wondering when this waa coming!!!!! Will flash it tomorrow for SURE (after my exam )
Awesomeeee
Sent from my Nexus Prime
Click to expand...
Click to collapse
I have my exam tomorrow
Xetium said:
If you could add HALO, I'd love you forever lol
Thanks for this!
Click to expand...
Click to collapse
I was thinking about it too, not sure though.
Is this the first rom with 4.9 toolchain on maguro? Im gonna try it out
sandy-achar said:
I have my exam tomorrow
I was thinking about it too, not sure though.
Click to expand...
Click to collapse
good luck!
and about halo, keep it clean, don't add it...
Really nice. Just one question please. Would the quick settings from Kevdliu be applied in your Rom?
thegtfusion said:
good luck!
and about halo, keep it clean, don't add it...
Click to expand...
Click to collapse
Agreed.
Anyone tried the it yet? Would like to know how it's performing for all.
albsat said:
Really nice. Just one question please. Would the quick settings from Kevdliu be applied in your Rom?
Click to expand...
Click to collapse
I haven't a clue, why don't u nandroid and try it?
sandy-achar said:
Agreed.
Anyone tried the it yet? Would like to know how it's performing for all.
Click to expand...
Click to collapse
its a bit laggy. used it in the supernova rom and pa.
thegtfusion said:
its a bit laggy. used it in the supernova rom and pa.
Click to expand...
Click to collapse
As in did u dirty flash it? Try it with another kernel like Franco, it works brilliantly then. That's why I explicitly mentioned to flash another kernel.
Can you add halo. Than I will test it
Sent from my Galaxy Nexus using xda premium
sandy-achar said:
As in did u dirty flash it? Try it with another kernel like Franco, it works brilliantly then. That's why I explicitly mentioned to flash another kernel.
Click to expand...
Click to collapse
I always clean flash and I ALWAYS use franco, it still lagged...
thegtfusion said:
its a bit laggy. used it in the supernova rom and pa.
Click to expand...
Click to collapse
Oh crap u were talking about the other rom ? I thought it was on this I was asking for it it was performing in this one. Derp
Thats why i asked u to try franco
Just flashed it. Seems pretty good. The stock colors are not for me, so I will flash Franco soon and change some settings. In terms of features it's fine, but personally I think that the customizable quick settings would be a huge + for the rom
Edit: if it stays this snappy I will gladly miss any feature
Edit2: I'm using the same minimal gapps package I always use but it seems like there is no gallery/cam in the ROM.
CyanogenMod 11 with crDroid additions for Xiaomi MiPad
!! IMPORTANT !!
xep.8800.org will be temporarely down from 29.03.15 for couple of weeks so it would be great if somebody do mirror of latest buld and post link here. Thx!
About:
Source built CM except proprietary blobs and binary kernel from stock MIUI rom.
This is not a port from another binary rom.
Click to expand...
Click to collapse
What's working:
It seems everything working for now..
Click to expand...
Click to collapse
Not working/Bugs:
"Wi-Fi region code" setting is broken. Do not touch it or it will break your wi-fi.
you tell me.. testing in progess..
Click to expand...
Click to collapse
Instructions:
1. Install CWM Recovery
2. Do Full Wipe If coming from another ROM
3. Flash ROM
4. Flash Google Apps (my recommendation is to install minipal gapps due to /system partition size limits)
5. Reboot
Click to expand...
Click to collapse
Multirom Instructions:
1. Install TWRP Multirom Recovery
2. Reboot into TWRP and install multirom-20150205-v30-UNOFFICIAL-mocha.zip
3. Click "Advanced->Multirom" and flash your desired second rom.
4. Return to the installed roms listing, click fresh installed rom and click "Remove boot.img" (Due to closed kernel sources kexec-hardboot is not implemented so we need to remove boot.img)
5. Reboot. Select your desired rom from multirom menu
Click to expand...
Click to collapse
Downloads:
cm-11-20150327-UNOFFICIAL-mocha.zip
CWM
Multirom:
TWRP_multirom-v2.8.4-mocha.zip
multirom-20150205-v30-UNOFFICIAL-mocha.zip
I don't know if it is actually compiled with TEGRA optimizations but have created CWM flashable zip with stock bionic libraries. You can flash it on top of CM installation:
tegra_bionic.zip
Changelog:
15.02.15
* apply qcom bionic optimization
* build.prop dalvik etc tweaks
02.02.15
* Reboot to recovery fixed
* Recents view proportion fixed
26.01.15
* Synced with CM repo
* have enabled Display mirroring (miracast) though it does not work with my EZ dongle, sound is ok but screen is black. May be it'll work with another dongles...
21.01.15
* Update to the latest kernel from stock MIUI
20.01.15
* Sleep issue fixed
* Adopt nvcplsvc for CM & implement Performance Profile selection
18.01.15
* Synced up with CM repo.
* Added USB Mass Storage mode for external sd. Though it does not work along with ADB Debug enabled, need to be switched off when using UMS mode.
17.01.15
* Switch to CM's audio_effects and make Dirac plugin work. Equalizer crash fixed.
Click to expand...
Click to collapse
Links:
http://github.com/cyanogenmod
http://github.com/cristianomatos
https://github.com/faust93
Click to expand...
Click to collapse
I take no responsibility for what this may or may not do to your device.
Do not forget to click Donate button! It makes me work harder!
Thanks Pumbaster for your work!
My device doesn't seem to go to sleep...
WakeLockDetector shows Android System --> ConnectivityService as the main issue. BetterBatteryStats shows the same...
I tried turning location services off, froze Mobile Data and Mobile Network Configuration in Titanium Backup but that doesn't help. No checking if the same wakelock appears with wifi off...
Anyone with any clue? Or the same problem?
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Krystanos said:
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Click to expand...
Click to collapse
I used pico gapps myself and the june version is way smaller then the december version, then again I actually did try the december version as well and it seemed to work fine. So not sure, apart from the size...
About TWRP vs CWM, not sure. Guess it also should work with TWRP but haven't tried... CWM is needed for True Dual Boot, but that seems bugged anyway.
By me too. Battery drain is to much, device don't go to sleep...
zolikaDB said:
By me too. Battery drain is to much, device don't go to sleep...
Click to expand...
Click to collapse
Yeah, seems to be a common issue.
My device only goes to sleep when wifi is turned completely off. When I have it set to turn off when display is off I still get the wakelocks. I also have set the scanning for open wifi to off, location services turned off, etc.
For now I flashed back to the 0114 version as that one is working fine here...
If I can share some logs or anything, I'd be more then happy to!
@dagrim1: I hope, Pumbaster make new, fixed build
I Encounter Graphical Glitches with 3rd Party Browsers (Opera and UC Browser)
Chrome works fine so far. Also heavy Battery drain an 17/1
@faust93: what is with battery drain?
Did a very dirty try or replacing frameworks.jar but that didn't work...
Saw some wifiStateTracker errors and that and ConnectivityService seemed to be part of the framework, that's why I gave it a shot. 0118 still has the deespleep/wakelock issue btw...
I don't really care about dual boot. MIUI has so much limits. Once I go to CM, I don't think I'll be able to come back to MIUI...
But I'll stick to CWM, just in case...
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
dagrim1 said:
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
Click to expand...
Click to collapse
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
zolikaDB said:
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
Click to expand...
Click to collapse
I don't believe it's integrated in 0118, think that fixes some sd stuff...
I am currently running the 0118 build (with the wpa_supplicant.bin file replaced manually) and seems to be working pretty fine. Had some video issues with a certain app (video jumping a bit, stuttering) but think I fixed that with 'disable hardware overlay' in developer options.
Without the replaced .bin I also had a problem with turning off and on wifi. It would work when booting, but if I turned it off I couldn't turn it on again... The replaced .bin also fixes that. Now checking if antutu finishes it's run...
@dagrim1: hope, Pumbaster fix this problem!
Just another small question: full wipe will delete the /data partition too right ? So the ROM zip file will be deleted too ? Or am I missing something ?
Thanks.
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
jastonas said:
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
Click to expand...
Click to collapse
Unfortunately I tried to install CWM with fastboot and it failed to install... No specific error message.
I have seen a port of TWRP for MiPad. Have you tried this one, or the standard one?
How I wish I could just flash CM on my MiPad...