Hi,
after wiping cache and Dalvik cache, *every time I reboot my phone* I keep getting the "Upgrade android: launching applications" error message...
How can I fix this?
Tx a lot.
If you do a normal reboot (ie/ without wiping dalvik and cache) do you still get this?.....I'm guessing probably not.
When you wipe dalvik and cache, you are clearing ALL the data for your installed apps.....the "upgrading android" message you are seeing is an indication that the apps are being re-updated and is a perfectly normal occurrence under these circumstances......not an error......
Please hit thanks if this helped
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
keithross39 said:
If you do a normal reboot (ie/ without wiping dalvik and cache) do you still get this?.....I'm guessing probably not.
When you wipe dalvik and cache, you are clearing ALL the data for your installed apps.....the "upgrading android" message you are seeing is an indication that the apps are being re-updated and is a perfectly normal occurrence under these circumstances......not an error......
Please hit thanks if this helped
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Unfortunately, as I wrote above, this happens EVERY TIME I reboot my phone, meaning normal reboot (not going into recovery mode and deleting anything, I just did that once!)....
Then some of your apps are not compatible with your rom or you just flashed a wrong .zip or something. I believe just wiping data and reflashing will fix this.
Sent From My PACMAN Wonder Using xda-Developers app
7amada100 said:
Then some of your apps are not compatible with your rom or you just flashed a wrong .zip or something. I believe just wiping data and reflashing will fix this.
Sent From My PACMAN Wonder Using xda-Developers app
Click to expand...
Click to collapse
I did not install anything - neither new apps, nor .zip - after wiping cache+dalvik.
I tried wiping cache+dalvik another time, then rebooting normally, but I still get this message every (normal) reboot...
I meant wiping data (losing all your apps and installing them again later.
Sent From My PACMAN Wonder Using xda-Developers app
7amada100 said:
I meant wiping data (losing all your apps and installing them again later.
Sent From My PACMAN Wonder Using xda-Developers app
Click to expand...
Click to collapse
I think I'd have to agree.....it sounds like you have a problem with one of the apps and/or the ROM you have on your phone......depending on how deep the issue goes, you have two options.....
Option 1.......download "appbak" from the play store, use it to make a list of your installed apps then delete them. When you've done that, wipe cache and dalvik again (lol) and use appbak to do a fresh reinstall of all your apps........
If that doesn't work.......
Option 2.......
Wipe EVERYTHING, including your ROM, SD card, internal storage, cache and dalvik, and do a COMPLETELY "pristine" install.....if that doesn't sort it out, nothing will, and a trip to the service center is probably the only option.......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
7amada100 said:
I meant wiping data (losing all your apps and installing them again later.
Sent From My PACMAN Wonder Using xda-Developers app
Click to expand...
Click to collapse
Well, thanks, but... I prefer keep it in this way rather than flashing again.
I'll wait for next CM9 version at least.
Is there any other method how to solve this?
Tx.
[.::MDT::.] said:
Well, thanks, but... I prefer keep it in this way rather than flashing again.
I'll wait for next CM9 version at least.
Is there any other method how to solve this?
Tx.
Click to expand...
Click to collapse
CM10 may well now be the priority......
http://forum.xda-developers.com/showthread.php?t=1990795
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
keithross39 said:
CM10 may well now be the priority......
http://forum.xda-developers.com/showthread.php?t=1990795
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Or pacman. It is works pretty great even in alpha!
Sent From My PACMAN Wonder Using xda-Developers app
keithross39 said:
CM10 may well now be the priority......
http://forum.xda-developers.com/showthread.php?t=1990795
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Wow, cool, I didn't notice it...
that's a good point!
Btw... is there any con with my problem?
I mean, it's annoying, but actually what's the problem (apart waiting 1min more and wasting 0,05% battery maybe) if every reboot it tries the upgrade?
[.::MDT::.] said:
Wow, cool, I didn't notice it...
that's a good point!
Click to expand...
Click to collapse
Lol....likewise....the only reason I knew, was that someone made reference to CM 10 in another post.....
And from what I've read, even though it's at initial release.....it's pretty much where CM 9 was when it was at Alpha 7......so defo looking promising.......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
keithross39 said:
Lol....likewise....the only reason I knew, was that someone made reference to CM 10 in another post.....
And from what I've read, even though it's at initial release.....it's pretty much where CM 9 was when it was at Alpha 7......so defo looking promising.......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Yep, seems pretty interesting, the only thing that leaves me puzzled is that he's using kernel 2.6.35, not 3.x... does this mean he will have to do an entire different CM10 version later on, or will we be able to upgrade from CM10kernel2.6 to CM10kernel3.x?
Moreover, re my problem... If I want to install CM10 and get rid of this problem, I guess I'd do a full wipe... is this procedure correct?
cwm-> wipe data/factory reset
Cwm-> wipe cache
cwm->mount and storage -> format system. Format data. Format cache.
Install cm10alpha1.
Install gapps.
Thanks.
According to Arco, the reason he's sticking with v2.6 is because the camera works with it....on 3.0, it doesn't......yet....
He has said that he might try to integrate 3.0 into the build at a later date....when it's more stable.
In terms of wiping prior to installing '10....
All I've ever done before flashing a new ROM is wipe cache, dalvik and factory wipe/reset. If you want advice about anything more thorough, the best person to comment would be Pepoluan......he can guide you step by step to achieve the "pristine" result you want.....but yes, at the very least, you need to deal with cache, dalvik and factory reset......
In terms of flashing CM 10, follow my guide...
http://forum.xda-developers.com/showthread.php?t=1941028
and everything should install without issue.....
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
[.::MDT::.] said:
Hi,
after wiping cache and Dalvik cache, *every time I reboot my phone* I keep getting the "Upgrade android: launching applications" error message...
How can I fix this?
Tx a lot.
Click to expand...
Click to collapse
I got this error in two occasion after clean instal new ROM.
What I do is go to CWM, wipe everything, re-flash ROM + Gapps, wipe everything (again), restore app with titanium backup. And everything is smooth...
keithross39 said:
According to Arco, the reason he's sticking with v2.6 is because the camera works with it....on 3.0, it doesn't......yet....
He has said that he might try to integrate 3.0 into the build at a later date....when it's more stable.
In terms of wiping prior to installing '10....
All I've ever done before flashing a new ROM is wipe cache, dalvik and factory wipe/reset. If you want advice about anything more thorough, the best person to comment would be Pepoluan......he can guide you step by step to achieve the "pristine" result you want.....but yes, at the very least, you need to deal with cache, dalvik and factory reset......
In terms of flashing CM 10, follow my guide...
http://forum.xda-developers.com/showthread.php?t=1941028
and everything should install without issue.....
Click to expand...
Click to collapse
I heard someone mentioning my name
To get a "Pristine" CM9, the steps are very simple, actually. BUT, you *need* a computer (laptop or desktop, doesn't matter).
1. Create a nandroid backup, just in case
2. Copy all important non-synced files from the internal storage & internal SD into the external SD
3. Backup your external SD into the computer
4. Format your SD. If you plan on using Link2SD, this would be a good time to also repartition it.
5. Copy the CM9 and GApps updatezips to the SD card.
6. Boot into CWM5/6 recovery, and wipe: cache, data, system, internal SD, battery stats.
7. Install the two updatezips (CM9 followed by GApps).
8. Reboot. Follow the initialization procedure.
9. If you want SD-Swapping, as soon as you arrived in the Trebuchet launcher, open Settings and configure SD-swapping.
10. DO NOT EVER restore any backups you made in GB, except messages and call logs. ALWAYS install apps fresh from the Play Store.
With a Pristine install, I *never* had any problems. And my phone's responsive enough I honestly no longer feel even the slightest desire to install any tweaks/mods/'engines'.
-- xda app / Pristine No-Mod CM9b3 / DXKL1 baseband / GT-I8150 --
Tx u all, I've just upgraded to CM10a1 and the problem is gone!
What I did:
reboot into CWM
NANDROID BACKUP
wipe cache
wipe dalvik cache
wipe data/factory reset
wipe battery stats
wipe internal memory (/sdcard)
installed CM10a1 zip from /external_sdcard
installed gapps for CM10a1 from /external_sdcard
fix permissions
reboot
[.::MDT::.] said:
Tx u all, I've just upgraded to CM10a1 and the problem is gone!
What I did:
reboot into CWM
NANDROID BACKUP
wipe cache
wipe dalvik cache
wipe data/factory reset
wipe battery stats
wipe internal memory (/sdcard)
installed CM10a1 zip from /external_sdcard
installed gapps for CM10a1 from /external_sdcard
fix permissions
reboot
Click to expand...
Click to collapse
Good job mate...
Just one point....I noticed you mentioned creating a nandroid backup......there is a good chance that if you use that backup, the issue you had will return......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
keithross39 said:
Good job mate...
Just one point....I noticed you mentioned creating a nandroid backup......there is a good chance that if you use that backup, the issue you had will return......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Yeah, I hope I'll not need it anyway!
Related
i find that the nightly build is cool and is awesome. the problem is when i use system panel task manager, the phone reboots. i dont know why and its more laggy than the cm7 mod please tell me its me doing something wrong not my phone's or the mod's fault.
and it svery irritating that it keeps hanging. please someone help me with the nightly mod thing i want to use.
Go for nightly#205. And do a full wipe including data,cache,dalvic cache, and perform a factory resetting from cwm before you flash the nightly. Also use latest buzz kernal so that you can overclock your phone.
Sent from my HTC Wildfire using XDA App
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..
so how did you install it? how to repartition sd card and not flash the script? how to install?
V0odo0 said:
i had problem with my previous nightly # 177 when i used darktremor APP2SD script .. even when i re flashed nightly #205 .. things were the same (Talking about random reboots upon opening task manager / and installing apps etc. ) ..
then i repartitioned my SD and didn't flashed the script... now its fine .. ..
Click to expand...
Click to collapse
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App
ongtengjun said:
I know how to clear data and cache from clockwork mod. How to clear devik. Ache and factory reset from clockwork mod. And the kernel from where? Can please tell me and post link for kernel?
Click to expand...
Click to collapse
Dude, explore options in cwm, don't do formatting boot, system, data, unless you learn what it does.
Options may vary from version to versions of cwm. So you have to say which cwm version you have. Mine is latest 5.xxx.
In it, data- factory format( user data or wipe user data, which ever it is called) is in main menu. And dalvic cache wipe is in advanced menu.
Lol you must carefully read topic named" complete wildfire index, then ask doubts, after all you can learn new things from every topic.
Your kernal will be in that topic. Check it out.
Sent from my HTC Wildfire using XDA App
another problem
now i got another problem. my wildfire will hang every now and then and i have to pluck out the battery and switch it back on. its very irritating and having to keep doing that will kill my bat very quickly so could anyone tell me any solutions?
To solve your problem, you must say. Your current configuration, rom, kernal, radio, tweeks, and what have you done just before you got the error
Sent from my HTC Wildfire using XDA App
well i am using the cm7 nightly build #205. kernel is buzz-kernel-2.6.35. i just downloaded some apps that were in my phone when i was using cm7 stable. and there wasnt a problem. do i have to upgrade to latest build and kernel? oh and just a question. if i want to upgrade from #205 to #208, do i have have to like wipe my data and cache and dalvik cache? i wouldnt wanna redownload and change everythin again
You can install the nightlies on top of one another without wiping anything, sometimes it seems better to wipe the cache to me but not always necessary, leave data alone.
Word of warning though, always make a nandroid backup before installing a new rom, although they're stable they are still called experimental for a reason, and sometimes (not very often) things can still go wrong.
Sent from my HTC Wildfire using xda premium
i wiped both the dalvik and partition cache and installed the #208 nightly build and the latest kernel but then the phone would just restart automatically. do i have to wipe data as well?
Yes do a "Wipe Data / Factory Reset" in Clockworkmod if it is giving you issues. Then try a fresh install and check again for instability.
Note - Performing a Wipe Data / Factory Reset will erase all data (Except SD Card)
well i not sure but i think the problem still occurs.. yes it does. i wiped data, cache and dalvik cache, did a install using cwm and it still reboots WHAT TO DO NOW
showlyshah said:
Lol you may have used beta 4 script, try beta 3, need to use atleast ext3 as your secondary partition. Try it with latest original cwm recovery. 5.xxx to partition. Do a clean install after partition.
And a personal suggestion. S2e app in market is good than dta2sd, though it have not much functions, but what it have, it does its best. I use it.
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Hey thanks dude .. yup i was using beta 3 last time.. beta 4 was a disaster to CM7.. .. i tried that too ..
but i think my partition was ext2 coz i am using CWM 3 .. will try with CWM 5 .. and sure... S2e too ...
Do you let it boot up before flashing the kernel?
Sent from my HTC Wildfire using xda premium
For i always keep a backup of my contacts in sd. Also apps using titanium backup, i had never used a nandroid backup till now, i alwayz do fresh installs, wiping every thing but not fat32. And always keep things updated.
Sent from my HTC Wildfire using XDA App
ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me
ongtengjun said:
ok now i have another problem. my phone will just reboot after hanging when i open system panel task manager. please some one help me
Click to expand...
Click to collapse
dude is it the same one you had before? thats why we mention to give your current spec. with out it we cant do any thing or we cant help you.
I just did my first custom ROM installment yesterday and well it was nice for a couple of minutes... All of a sudden my messaging and wallet app started force closing constantly every other 5 seconds. Along with something called android.process.acode (not sure if that's what it was called but it's what i remember).
Yes I backed up all my data (titanium pro and CWM), cleared cashe and dvalink or whatever the heck it's called. I then installed the ROM from zip and everything went smoothly, even installing GAPPS.
I was upgrading from stock 4.0.2. I'm not sure if i installed the correct version of GAPPS for it though so maybe that's the problem? Idk what else I should do, maybe just a new ROM?
Thanks in advance!
anyone? bump...........
SikkNazty said:
I just did my first custom ROM installment yesterday and well it was nice for a couple of minutes... All of a sudden my messaging and wallet app started force closing constantly every other 5 seconds. Along with something called android.process.acode (not sure if that's what it was called but it's what i remember).
Yes I backed up all my data (titanium pro and CWM), cleared cashe and dvalink or whatever the heck it's called. I then installed the ROM from zip and everything went smoothly, even installing GAPPS.
I was upgrading from stock 4.0.2. I'm not sure if i installed the correct version of GAPPS for it though so maybe that's the problem? Idk what else I should do, maybe just a new ROM?
Thanks in advance!
Click to expand...
Click to collapse
Did you wipe dalvik and /cache only?
Need to wipe /data (factory reset) and /system (just for good measure) then re-flash your ROM/Kernel/Gapps
Sent from my Galaxy Nexus using Tapatalk
_Dennis_ said:
Did you wipe dalvik and /cache only?
Need to wipe /data (factory reset) and /system (just for good measure) then re-flash your ROM/Kernel/Gapps
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
yes i did wipe data, forgot to mention that. I just found out it was because of the wrong version of gapps. Thanks anyways dude!
So recently I've been trying to flash the CM9 nightlies and all attempts have led to boot-loops. I was wondering if it was just a bad download so I tried to install AOKP and got the same results...so then I tried the new Paranoid Android rom and still got boot-loops. So is my phone like rejecting 4.0? somebody please help me out with this!
orfius christ said:
So recently I've been trying to flash the CM9 nightlies and all attempts have led to boot-loops. I was wondering if it was just a bad download so I tried to install AOKP and got the same results...so then I tried the new Paranoid Android rom and still got boot-loops. So is my phone like rejecting 4.0? somebody please help me out with this!
Click to expand...
Click to collapse
I've had this problem before. What I had to do to fix it was flash another recovery. You can also try fixing permissions in CWM.
PureMotive said:
I've had this problem before. What I had to do to fix it was flash another recovery. You can also try fixing permissions in CWM.
Click to expand...
Click to collapse
Thanks pure! I'm trying the method of fixing permissions first and if that's unsuccessful I'll try another recovery.
I'm still having issues. I've tried the permission fix and different recovery and still nothing.
Sent from my HTC Droid Incredible using xda app-developers app
orfius christ said:
I'm still having issues. I've tried the permission fix and different recovery and still nothing.
Sent from my HTC Droid Incredible using xda app-developers app
Click to expand...
Click to collapse
You tried a new recovery as in you went from:
-CWM to Amon Ra?
OR
-CWM 5.0.0.x to CWM 3.0.0.8?
If you only did option 1, have you tried reflashing CWM in hboot?
If you only did option 2, try option 1 then. If that fails, try going into a saved nandroid, open Rom Manager, and select a different version of CWM. Make sure that you go onto settings and check "Erase Recovery."
I went from CWM to Amon.
Sent from my HTC Droid Incredible using XDA
So I've still had no luck getting anything to run but my current. I've done all three things mentioned and still absolutely nothing. I cleaned out my SD yesterday and pretty much got rid of a lot of useless stuff, could that have effected anything?
Sent from my HTC Droid Incredible using XDA
orfius christ said:
So I've still had no luck getting anything to run but my current. I've done all three things mentioned and still absolutely nothing. I cleaned out my SD yesterday and pretty much got rid of a lot of useless stuff, could that have effected anything?
Sent from my HTC Droid Incredible using XDA
Click to expand...
Click to collapse
You probably are but i gotta ask, are you wiping everything before flashing? Meaning formating everything in the mounts and storrage menu in cwm except emmc and sd.
Yes I was, this pretty much goes with the whole reason I wanted s-on. I had this theory that if I returned to complete stock and re-rooted my phone that I could flash properly again, and I was correct.
Sent from my ADR6300 using xda app-developers app
Here's a trick to ENSURE installation.
Make sure u back up ur apps on titanium.
1. Wipe user data 2x
2. Wipe cache partition 2x
3. Wipe Dalvick Cache 3x
4. Format boot 2x
5. Format system 2x
6. Format datadata 2x
7. Format data 2x
8. Format cache 2x
9. Flash the Rom.
10. Boot up and enjoy ICS.
This is what I do to make sure it is done. I dont trust manual installation.
Do this every time.
Dragn4rce said:
Here's a trick to ENSURE installation.
Make sure u back up ur apps on titanium.
1. Wipe user data 2x
2. Wipe cache partition 2x
3. Wipe Dalvick Cache 3x
4. Format boot 2x
5. Format system 2x
6. Format datadata 2x
7. Format data 2x
8. Format cache 2x
9. Flash the Rom.
10. Boot up and enjoy ICS.
This is what I do to make sure it is done. I dont trust manual installation.
Do this every time.
Click to expand...
Click to collapse
Aha well thanks on the help but I already got everything working again. May I ask why you wipe everything so much? It doesn't really make a difference.
Sent from my HTC Droid Incredible using xda app-developers app
Dragn4rce said:
Here's a trick to ENSURE installation.
Make sure u back up ur apps on titanium.
1. Wipe user data 2x
2. Wipe cache partition 2x
3. Wipe Dalvick Cache 3x
4. Format boot 2x
5. Format system 2x
6. Format datadata 2x
7. Format data 2x
8. Format cache 2x
9. Flash the Rom.
10. Boot up and enjoy ICS.
This is what I do to make sure it is done. I dont trust manual installation.
Do this every time.
Click to expand...
Click to collapse
Oh god...no dont do this. Wipe each once or flash a superwipe script to wipe everything for you
Dragn4rce said:
Here's a trick to ENSURE installation.
Make sure u back up ur apps on titanium.
1. Wipe user data 2x
2. Wipe cache partition 2x
3. Wipe Dalvick Cache 3x
4. Format boot 2x
5. Format system 2x
6. Format datadata 2x
7. Format data 2x
8. Format cache 2x
9. Flash the Rom.
10. Boot up and enjoy ICS.
This is what I do to make sure it is done. I dont trust manual installation.
Do this every time.
Click to expand...
Click to collapse
Redundancy to the max but that's OK. I've given up on trying to convince people.
Sent from my Galaxy Nexus using Tapatalk 2
OK so I've been trying everything and I'm tired of not been able to
Get pass the booting animation
all my other ics roms work perfect
If anyone lives near Van Nuys CA pls let me know I'll pay you to put a working JB ROM
kingviper10 said:
OK so I've been trying everything and I'm tired of not been able to
Get pass the booting animation
all my other ics roms work perfect
If anyone lives near Van Nuys CA pls let me know I'll pay you to put a working JB ROM
Click to expand...
Click to collapse
You've tried literally everything? First and foremost you Wiped Data/Cache/Dalvik and then also Formatted System and Data manually before flashing? Formatting system and data is under "Mounts and Storage." I know a lot of people wouldn't get past the boot screen because they didn't do that...
anton2009 said:
You've tried literally everything? First and foremost you Wiped Data/Cache/Dalvik and then also Formatted System and Data manually before flashing? Formatting system and data is under "Mounts and Storage." I know a lot of people wouldn't get past the boot screen because they didn't do that...
Click to expand...
Click to collapse
Ok so I wipe all 3 then I should go to mounts and mount and unmount what? Then install JB v3 ones it's done what should be mounted or unmount ?then after that just reboot system?
I'm pretty sure my problem has to do with mounting and unmount ing
kingviper10 said:
Ok so I wipe all 3 then I should go to mounts and mount and unmount what? Then install JB v3 ones it's done what should be mounted or unmount ?then after that just reboot system?
I'm pretty sure my problem has to do with mounting and unmount ing
Click to expand...
Click to collapse
Don't unmount anything.. just format /system under "Mounts and Storage"
joshnichols189 said:
Don't unmount anything.. just format /system under "Mounts and Storage"
Click to expand...
Click to collapse
I only format /system or /data (if need be) before flashing a rom, never cache or dalvik, which are hash signed. A new rom, a new flash, a new /system, has different hash, which leads to cache and dalvik being rebuilt on first boot after a flash.
sent from my i9250
Okay let me simplify everything for you and you will not need to pay anyone for assistance. All you have to do is initially erase all data and factory reset, then install the new JellyBean ROM using clockworkmod recovery and after that wipe cache and dalvik cache..you can run fix permissions (i did but not sure if it matters.) If it still is stuck on the boot screen then wipe data again, reinstall JB rom, wipe cache and dalvik cache and wipe anything else you can wipe. After all that mine started working normally. If you are still stuck sent me a PM and I can assist you from Atlanta GA and for free!
bradleyyy said:
Okay let me simplify everything for you and you will not need to pay anyone for assistance. All you have to do is initially erase all data and factory reset, then install the new JellyBean ROM using clockworkmod recovery and after that wipe cache and dalvik cache..you can run fix permissions (i did but not sure if it matters.) If it still is stuck on the boot screen then wipe data again, reinstall JB rom, wipe cache and dalvik cache and wipe anything else you can wipe. After all that mine started working normally. If you are still stuck sent me a PM and I can assist you from Atlanta GA and for free!
Click to expand...
Click to collapse
OK thanks I'm going to give it a try again were due I get the fix permission?
kingviper10 said:
OK thanks I'm going to give it a try again were due I get the fix permission?
Click to expand...
Click to collapse
Its gonna be a long proccess if you don't where to "get" fix permissions... lol
Sent from my Galaxy Nexus using xda app-developers app
kingviper10 said:
OK thanks I'm going to give it a try again were due I get the fix permission?
Click to expand...
Click to collapse
IIRC it's under advanced in CWM
Sent from my Galaxy Nexus using xda premium
3rdstring said:
IIRC it's under advanced in CWM
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I guess the other member was right I'm on my s3 searching and can't seem to find it ? Can u pls get me a link sorry but im new to the forum really appreciate all the help
kingviper10 said:
I guess the other member was right I'm on my s3 searching and can't seem to find it ? Can u pls get me a link sorry but im new to the forum really appreciate all the help
Click to expand...
Click to collapse
Go into ClockworkMod Recovery, then Advanced, then Fix Permissions
I had a very hard time doing it too. The first time I did it I, when I setup the phone, it kept having every app crash, one after another. Managed to get back into CWM and try to restore my ICS and it kept giving me errors. I finally read something about a super wipe, but it didn't say it worked for the GNex, so I just did a cache wipe, and did the data wipe 4 times, and then installed JB one more time, and it finally worked. I never had to fix permissions or anything like that. Perhaps your phone just needs some extra wipes like mine.
harveydent said:
Go into ClockworkMod Recovery, then Advanced, then Fix Permissions
Click to expand...
Click to collapse
Ok so I did everything u said I'm passed the Google screen and now on the X screen crossing my fingers that this works
Not sure what's going on but whenever I install these I'm getting low internal storage warnings. I wipe system, data, cache, dalvik 3x on TWRP. Any Ideas? It's only happening on these 2 roms for some reason.
macattack510 said:
Not sure what's going on but whenever I install these I'm getting low internal storage warnings. I wipe system, data, cache, dalvik 3x on TWRP. Any Ideas? It's only happening on these 2 roms for some reason.
Click to expand...
Click to collapse
Have u tried deleting some files? Has this happened with any other TW rom?
Sent from my SGH-T989 using Tapatalk 2
iNeedICS said:
Have u tried deleting some files? Has this happened with any other TW rom?
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
I ended up fixing it. For some reason just on these roms and the new TWRP i have to wipe factory data right after installing and everything works perfectly
Glad you got it fixed was having the same issue because I didn't listen with one of the steps (go figure) but after a reflash and following that works awesome now.