Develop Bugs

Help: New ROM = Force Close Everything!

Hey guys so I just flashed this rom on to my phone:
http://forum.xda-developers.com/showthread.php?t=1175842
It looks amazing, but how do I get it to work without all the force closes?
Nils says this in the thread:
"If you choose to flash over without a wipe and have lags, FC's, things missing, or things just don't work right then flash again with a complete wipe"
What does he mean by a complete wipe? and how do I do this? Thanks everyone!

Use Rom manager(found in market) boot into recovery. You will see 2 wipe options Data and cache partition. Wipe both 3 times each. Still in recovery click on advanced. Wipe dalvick cache 3 times. Then install rom.
Full wipe
Sent from my ADR6300 using XDA Premium App

MagnaCore said:
Use Rom manager(found in market) boot into recovery. You will see 2 wipe options Data and cache partition. Wipe both 3 times each. Still in recovery click on advanced. Wipe dalvick cache 3 times. Then install rom.
Full wipe
Sent from my ADR6300 using XDA Premium App
Click to expand...
Click to collapse
You don't need to wipe each thing 3 times; it's the same code executing, so once is perfectly fine.
anyway, like MagnaCore said, a full wipe is:
Factory Reset
Wipe Data/Cache partition
go to advanced
wipe system
wipe data
wipe dalvik cache
I think that's where they're located; can't remember 100% for sure tho.

I'd do what the poster above me said, and /system is actually in the "mounts and storage" menu in recovery.

Ah that's right couldn't remember where it was for sure. Thanks for the correction.

No problem. Always a good thing to remember to wipe,since it isn't covered by the wipe data/factory reset option. IMO it's better to be more thorough with WHAT you're wiping as opposed to doing it multiple times..

k_nivesout said:
No problem. Always a good thing to remember to wipe,since it isn't covered by the wipe data/factory reset option. IMO it's better to be more thorough with WHAT you're wiping as opposed to doing it multiple times..
Click to expand...
Click to collapse
Exactly.
I usually do the factory reset, wipe data/cache, go to mounts, wipe system/data/cache again, and then go to advanced and wipe dalvik cache; just to make sure I got everything.

Bmw, you have .92 hboot, yes? You'll find force closes with this if not.
Sent from my ADR6300 using XDA Premium App

[Q] Ill pay some one to put JB on my Lte gnex

OK so I've been trying everything and I'm tired of not been able to
Get pass the booting animation
all my other ics roms work perfect
If anyone lives near Van Nuys CA pls let me know I'll pay you to put a working JB ROM

kingviper10 said:
OK so I've been trying everything and I'm tired of not been able to
Get pass the booting animation
all my other ics roms work perfect
If anyone lives near Van Nuys CA pls let me know I'll pay you to put a working JB ROM
Click to expand...
Click to collapse
You've tried literally everything? First and foremost you Wiped Data/Cache/Dalvik and then also Formatted System and Data manually before flashing? Formatting system and data is under "Mounts and Storage." I know a lot of people wouldn't get past the boot screen because they didn't do that...

anton2009 said:
You've tried literally everything? First and foremost you Wiped Data/Cache/Dalvik and then also Formatted System and Data manually before flashing? Formatting system and data is under "Mounts and Storage." I know a lot of people wouldn't get past the boot screen because they didn't do that...
Click to expand...
Click to collapse
Ok so I wipe all 3 then I should go to mounts and mount and unmount what? Then install JB v3 ones it's done what should be mounted or unmount ?then after that just reboot system?
I'm pretty sure my problem has to do with mounting and unmount ing

kingviper10 said:
Ok so I wipe all 3 then I should go to mounts and mount and unmount what? Then install JB v3 ones it's done what should be mounted or unmount ?then after that just reboot system?
I'm pretty sure my problem has to do with mounting and unmount ing
Click to expand...
Click to collapse
Don't unmount anything.. just format /system under "Mounts and Storage"

joshnichols189 said:
Don't unmount anything.. just format /system under "Mounts and Storage"
Click to expand...
Click to collapse
I only format /system or /data (if need be) before flashing a rom, never cache or dalvik, which are hash signed. A new rom, a new flash, a new /system, has different hash, which leads to cache and dalvik being rebuilt on first boot after a flash.
sent from my i9250

Okay let me simplify everything for you and you will not need to pay anyone for assistance. All you have to do is initially erase all data and factory reset, then install the new JellyBean ROM using clockworkmod recovery and after that wipe cache and dalvik cache..you can run fix permissions (i did but not sure if it matters.) If it still is stuck on the boot screen then wipe data again, reinstall JB rom, wipe cache and dalvik cache and wipe anything else you can wipe. After all that mine started working normally. If you are still stuck sent me a PM and I can assist you from Atlanta GA and for free!

bradleyyy said:
Okay let me simplify everything for you and you will not need to pay anyone for assistance. All you have to do is initially erase all data and factory reset, then install the new JellyBean ROM using clockworkmod recovery and after that wipe cache and dalvik cache..you can run fix permissions (i did but not sure if it matters.) If it still is stuck on the boot screen then wipe data again, reinstall JB rom, wipe cache and dalvik cache and wipe anything else you can wipe. After all that mine started working normally. If you are still stuck sent me a PM and I can assist you from Atlanta GA and for free!
Click to expand...
Click to collapse
OK thanks I'm going to give it a try again were due I get the fix permission?

kingviper10 said:
OK thanks I'm going to give it a try again were due I get the fix permission?
Click to expand...
Click to collapse
Its gonna be a long proccess if you don't where to "get" fix permissions... lol
Sent from my Galaxy Nexus using xda app-developers app

kingviper10 said:
OK thanks I'm going to give it a try again were due I get the fix permission?
Click to expand...
Click to collapse
IIRC it's under advanced in CWM
Sent from my Galaxy Nexus using xda premium

3rdstring said:
IIRC it's under advanced in CWM
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I guess the other member was right I'm on my s3 searching and can't seem to find it ? Can u pls get me a link sorry but im new to the forum really appreciate all the help

kingviper10 said:
I guess the other member was right I'm on my s3 searching and can't seem to find it ? Can u pls get me a link sorry but im new to the forum really appreciate all the help
Click to expand...
Click to collapse
Go into ClockworkMod Recovery, then Advanced, then Fix Permissions

I had a very hard time doing it too. The first time I did it I, when I setup the phone, it kept having every app crash, one after another. Managed to get back into CWM and try to restore my ICS and it kept giving me errors. I finally read something about a super wipe, but it didn't say it worked for the GNex, so I just did a cache wipe, and did the data wipe 4 times, and then installed JB one more time, and it finally worked. I never had to fix permissions or anything like that. Perhaps your phone just needs some extra wipes like mine.

harveydent said:
Go into ClockworkMod Recovery, then Advanced, then Fix Permissions
Click to expand...
Click to collapse
Ok so I did everything u said I'm passed the Google screen and now on the X screen crossing my fingers that this works

problems flashing roms, big problems.

I don't know what caused it... but no matter what rom I flash it seems that it always gets through the bootup screens and then gets stuck on the samsung screen, and won't load into a custom rom. It seems like something happened to my system and I have tried everything and nothing it working. I can only run with the stock rom it came with and thats it.
I have no clue whats going on. When I flash from ROM to ROM I take these steps.
1- put rom on SD card
2- nandroid
3- factory wipe from recovery
4- wipe cache
5- wipe dalvik
6- flash rom
7- flash gapps (if on AOSP based)
8- reboot.
I have went back to stock via odin, then reflashed via odin, repushed the recovery, basically started from scratch and nothing is letting me install a new rom. Wasn't really having any problems until today... any ideas? :crying::crying::crying::crying::crying:
edit- I was thinking, I did ALOT of debloating at the beginning using the aroma debloater, and did some minor debloating myself.. I wouldn't think this would have anything to do with a new rom because when I wipe everything it does a fresh install of everything... So I am stuck.

3.5- mounts and storage > format system
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

theROMinator said:
3.5- mounts and storage > format system
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
should this be done everytime?

Optimizer said:
should this be done everytime?
Click to expand...
Click to collapse
Yes. Although if you're updating a rom i.e. cm or aokp a cache/dalvik cache wipe will do (unless stated otherwise).
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

theROMinator said:
Yes. Although if you're updating a rom i.e. cm or aokp a cache/dalvik cache wipe will do (unless stated otherwise).
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
see my main thing was everyone was talking about how if I was going from a modded stock rom to a modded stock rom there would not need anything except cache wipes... and i still get hung..:/

I recommended backing up all of your data, do a factory reset, then go back to stock with an Odin package from development. From there you can root or whatever you please.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

[HOW-TO] Proper method to flash a ROM

First off if you're on ANY recovery that isn't CWM 5.0.2.7 you DO NOT NEED TDJS SUPER WIPE OR CACHE WIPE SCRIPTS!!!! Seriously stop flashing these people you're filling up threads with problems caused by both of these scripts and bad flashing methods. Here's how to PROPERLY flash a ROM..
If on CWM 6.0.x.x
1. Wipe factory data/reset
2. Wipe cache
3. Go into mounts and storage
4. Format /system
5. Format /data
6. Format /cache
7. Enter advanced
8. Wipe dalvik
9. Flash ROM then gapps
10. Reboot and let the ROM settle for 5-10 minutes if flashing TW ROMs, this step is unnecessary for AOSP based ROMs.
11. (Optional) if flashing a new radio flash AFTER the ROM has been initially booted for the first time. No wipes are necessary when flashing a new radio but it HAS to be flashed after the ROM is loaded and settled in. Flashing a radio first and then a ROM has caused issues like the phone not even recognizing there is a network for it. ( phone remains in emergency mode )
If you're on a Cyanogenmod nightly a full wipe IS NOT REQUIRED. The proper method of dirty flashing is just wiping cache, ( NOT FORMAT CACHE IN MOUNTS & STORAGE )
wiping dalvik and flashing your ROM. Simple as that.
If using TWRP 2.2+ the steps are essentially the same or use TDJs wipe scripts. They work perfectly fine with TWRP. Feel free to wipe 2x or even 3x if it makes you feel safer about your installation.
And THAT'S IT. People are cluttering up threads with issues than can totally be avoided by flashing the right way. I hope this helps some of you iron out these insane tiny quirks I keep reading about.
Happy flashing folks.
EDIT:
I forgot to note.. if you're still using one of TDJs roms or any other rom that automatically wipes with TDJs SUPER CACHE WIPE, do NOT use any other recoveries other than CWM 5.0.2.7 or TWRP 2.2+. With any other recovery such as CWM 6.0.x.x+, the wipe script breaks the roms ability to reboot properly and the only way to solve this is to use TDJs CACHE WIPE which in turn breaks your recoveries ability to work properly.
Sent from my SAMSUNG-SGH-T989 using xda premium

Thanks man this was needed. Yes threads get filled with this so often. I dirty flash like you mentioned accept I format system first. I also clean flash like you mentioned but never formatted cache and dalvik just system. That's good to know. Thanks
But I will add those new steps. I format system when dirty flashing because on the cm10 Site they mentioned that.
Again thanks
Sent from my SAMSUNG-SGH-T989 using xda premium

I edited OP with a little bit more information for safer flashing.
Sent from my SGH-T989 using xda premium

Sad we need to keep telling people how to flash. If you are not sure what you are doing I think you should be very careful before you destroy your expensive toy. Everyone should have an idea on how to flash and restore from a bad flash before they even root. Also as my sig says let Google be your friend people if you run into issues instead of running to a thread and clogging it up...
Thanks for post and this is a bump to keep it on page 1 and hopefully more people will notice it.

So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?

Goofy317 said:
So I messed up and used the darkside scripts with 6.0.1.4 and I can't get my phone to boot, like you mentioned. It also destroyed the recovery, does nothing at all. What can I do, if anything, to fix?
Click to expand...
Click to collapse
Can you boot into recovery at all? If you can.. download the TWRP 2.2.2.0 zip in its thread and flash it. Its going to hang in the install process but should say twrp has been installed. At that point reset your phone by holding the power button. As soon as you feel the phone vibrate hold down both volume buttons and you should boot into TWRP recovery.
Sent from my SAMSUNG-SGH-T989 using xda premium

I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....

tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
Darkside superwipe will only mess your ROMs ability to reboot on touchwiz ROMs. The only way to fix this is flashing the darkside cache wipe which WILL break clockwork mod 6.0.1.4 like the user above. Point is.. don't use either scripts at all on CWM. Wipe the old fashioned way.
Sent from my SAMSUNG-SGH-T989 using xda premium

tickerman said:
I have been using the darkside wipe! It has been working great. I don't think that it will brick my phone or anything.....
Click to expand...
Click to collapse
I agree. even after switching to twrp I still find the script useful. But op warning about using script with cwm version 6xxx might be true. I have issue with boot when i was on cwm 6 and i had to Odin cwm 5.0.2.7 again to get into recovery menu.
Sent from my SGH-T989 using xda app-developers app

Thanks, always forgot the formatting steps

ultratt said:
Thanks, always forgot the formatting steps
Click to expand...
Click to collapse
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app

RushAOZ said:
Never forget those! Those completely format your partitions.. like formatting a hard drive before you install Windows.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?

Davy Jones said:
Thanks for the guide. One question, how do you format partitions on TWRP? Do you need to?
Click to expand...
Click to collapse
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium

RushAOZ said:
Luckily enough, TWRP does this in the wipe section already when you hit system, cache and dalvik. Its an awesome and well thought out recovery!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Oh cool, I was already really liking TWRP and this makes it even better.

This thread should be a sticky.

Khameleon said:
This thread should be a sticky.
Click to expand...
Click to collapse
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?

apicia said:
Agree.
Sub'n.
I just followed this and it answers many questions. I have great luck with CWR 5.0.2.7 and the darkside scripts. Everytime I had an issue, I would run the darkside cache script and all was fixed.
Now, since I upgraded CWR, I have had issues installing ROMS, bad recovery installs, etc. Just as you mentioned.
Got a new phone today. Flashed an odin CWR (didn't know the version). It turned out to be an older touch version. I CWR flashed the latest Sk8's recovery. I then followed your instructions. Installed JB ROM and Gapps and it was a success. Not boot loop.
Questions: What do I do if I want to wipe cache and dalvik or fix permissions in the future? What radio is recommended with the latest JB nightly?
Click to expand...
Click to collapse
Just go into CWM and wipe cache in the main menu and dalvik in the advanced menu. To be honest though you don't need to do this whatsoever. Only when dirty flashing a new nightly. In my experience atleast lol as far as gapps go..
http://goo.im/gapps/gapps-jb-20121011-signed.zip
These should work just fine
Sent from my SAMSUNG-SGH-T989 using xda premium

Bump fer new users yo
Sent from my SGH-T989 using xda premium

Bump for new users
Sent from my SAMSUNG-SGH-T989 using xda premium

Thanks

[Q] "Upgrade android: launching applications" error message

Hi,
after wiping cache and Dalvik cache, *every time I reboot my phone* I keep getting the "Upgrade android: launching applications" error message...
How can I fix this?
Tx a lot.

If you do a normal reboot (ie/ without wiping dalvik and cache) do you still get this?.....I'm guessing probably not.
When you wipe dalvik and cache, you are clearing ALL the data for your installed apps.....the "upgrading android" message you are seeing is an indication that the apps are being re-updated and is a perfectly normal occurrence under these circumstances......not an error......
Please hit thanks if this helped
From my Galaxy W on CM9 and CWM6 with Tapatalk 2

keithross39 said:
If you do a normal reboot (ie/ without wiping dalvik and cache) do you still get this?.....I'm guessing probably not.
When you wipe dalvik and cache, you are clearing ALL the data for your installed apps.....the "upgrading android" message you are seeing is an indication that the apps are being re-updated and is a perfectly normal occurrence under these circumstances......not an error......
Please hit thanks if this helped
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Unfortunately, as I wrote above, this happens EVERY TIME I reboot my phone, meaning normal reboot (not going into recovery mode and deleting anything, I just did that once!)....

Then some of your apps are not compatible with your rom or you just flashed a wrong .zip or something. I believe just wiping data and reflashing will fix this.
Sent From My PACMAN Wonder Using xda-Developers app

7amada100 said:
Then some of your apps are not compatible with your rom or you just flashed a wrong .zip or something. I believe just wiping data and reflashing will fix this.
Sent From My PACMAN Wonder Using xda-Developers app
Click to expand...
Click to collapse
I did not install anything - neither new apps, nor .zip - after wiping cache+dalvik.
I tried wiping cache+dalvik another time, then rebooting normally, but I still get this message every (normal) reboot...

I meant wiping data (losing all your apps and installing them again later.
Sent From My PACMAN Wonder Using xda-Developers app

7amada100 said:
I meant wiping data (losing all your apps and installing them again later.
Sent From My PACMAN Wonder Using xda-Developers app
Click to expand...
Click to collapse
I think I'd have to agree.....it sounds like you have a problem with one of the apps and/or the ROM you have on your phone......depending on how deep the issue goes, you have two options.....
Option 1.......download "appbak" from the play store, use it to make a list of your installed apps then delete them. When you've done that, wipe cache and dalvik again (lol) and use appbak to do a fresh reinstall of all your apps........
If that doesn't work.......
Option 2.......
Wipe EVERYTHING, including your ROM, SD card, internal storage, cache and dalvik, and do a COMPLETELY "pristine" install.....if that doesn't sort it out, nothing will, and a trip to the service center is probably the only option.......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2

7amada100 said:
I meant wiping data (losing all your apps and installing them again later.
Sent From My PACMAN Wonder Using xda-Developers app
Click to expand...
Click to collapse
Well, thanks, but... I prefer keep it in this way rather than flashing again.
I'll wait for next CM9 version at least.
Is there any other method how to solve this?
Tx.

[.::MDT::.] said:
Well, thanks, but... I prefer keep it in this way rather than flashing again.
I'll wait for next CM9 version at least.
Is there any other method how to solve this?
Tx.
Click to expand...
Click to collapse
CM10 may well now be the priority......
http://forum.xda-developers.com/showthread.php?t=1990795
From my Galaxy W on CM9 and CWM6 with Tapatalk 2

keithross39 said:
CM10 may well now be the priority......
http://forum.xda-developers.com/showthread.php?t=1990795
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Or pacman. It is works pretty great even in alpha!
Sent From My PACMAN Wonder Using xda-Developers app

keithross39 said:
CM10 may well now be the priority......
http://forum.xda-developers.com/showthread.php?t=1990795
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Wow, cool, I didn't notice it...
that's a good point!
Btw... is there any con with my problem?
I mean, it's annoying, but actually what's the problem (apart waiting 1min more and wasting 0,05% battery maybe) if every reboot it tries the upgrade?

[.::MDT::.] said:
Wow, cool, I didn't notice it...
that's a good point!
Click to expand...
Click to collapse
Lol....likewise....the only reason I knew, was that someone made reference to CM 10 in another post.....
And from what I've read, even though it's at initial release.....it's pretty much where CM 9 was when it was at Alpha 7......so defo looking promising.......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2

keithross39 said:
Lol....likewise....the only reason I knew, was that someone made reference to CM 10 in another post.....
And from what I've read, even though it's at initial release.....it's pretty much where CM 9 was when it was at Alpha 7......so defo looking promising.......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Yep, seems pretty interesting, the only thing that leaves me puzzled is that he's using kernel 2.6.35, not 3.x... does this mean he will have to do an entire different CM10 version later on, or will we be able to upgrade from CM10kernel2.6 to CM10kernel3.x?
Moreover, re my problem... If I want to install CM10 and get rid of this problem, I guess I'd do a full wipe... is this procedure correct?
cwm-> wipe data/factory reset
Cwm-> wipe cache
cwm->mount and storage -> format system. Format data. Format cache.
Install cm10alpha1.
Install gapps.
Thanks.

According to Arco, the reason he's sticking with v2.6 is because the camera works with it....on 3.0, it doesn't......yet....
He has said that he might try to integrate 3.0 into the build at a later date....when it's more stable.
In terms of wiping prior to installing '10....
All I've ever done before flashing a new ROM is wipe cache, dalvik and factory wipe/reset. If you want advice about anything more thorough, the best person to comment would be Pepoluan......he can guide you step by step to achieve the "pristine" result you want.....but yes, at the very least, you need to deal with cache, dalvik and factory reset......
In terms of flashing CM 10, follow my guide...
http://forum.xda-developers.com/showthread.php?t=1941028
and everything should install without issue.....
From my Galaxy W on CM9 and CWM6 with Tapatalk 2

[.::MDT::.] said:
Hi,
after wiping cache and Dalvik cache, *every time I reboot my phone* I keep getting the "Upgrade android: launching applications" error message...
How can I fix this?
Tx a lot.
Click to expand...
Click to collapse
I got this error in two occasion after clean instal new ROM.
What I do is go to CWM, wipe everything, re-flash ROM + Gapps, wipe everything (again), restore app with titanium backup. And everything is smooth...

keithross39 said:
According to Arco, the reason he's sticking with v2.6 is because the camera works with it....on 3.0, it doesn't......yet....
He has said that he might try to integrate 3.0 into the build at a later date....when it's more stable.
In terms of wiping prior to installing '10....
All I've ever done before flashing a new ROM is wipe cache, dalvik and factory wipe/reset. If you want advice about anything more thorough, the best person to comment would be Pepoluan......he can guide you step by step to achieve the "pristine" result you want.....but yes, at the very least, you need to deal with cache, dalvik and factory reset......
In terms of flashing CM 10, follow my guide...
http://forum.xda-developers.com/showthread.php?t=1941028
and everything should install without issue.....
Click to expand...
Click to collapse
I heard someone mentioning my name
To get a "Pristine" CM9, the steps are very simple, actually. BUT, you *need* a computer (laptop or desktop, doesn't matter).
1. Create a nandroid backup, just in case
2. Copy all important non-synced files from the internal storage & internal SD into the external SD
3. Backup your external SD into the computer
4. Format your SD. If you plan on using Link2SD, this would be a good time to also repartition it.
5. Copy the CM9 and GApps updatezips to the SD card.
6. Boot into CWM5/6 recovery, and wipe: cache, data, system, internal SD, battery stats.
7. Install the two updatezips (CM9 followed by GApps).
8. Reboot. Follow the initialization procedure.
9. If you want SD-Swapping, as soon as you arrived in the Trebuchet launcher, open Settings and configure SD-swapping.
10. DO NOT EVER restore any backups you made in GB, except messages and call logs. ALWAYS install apps fresh from the Play Store.
With a Pristine install, I *never* had any problems. And my phone's responsive enough I honestly no longer feel even the slightest desire to install any tweaks/mods/'engines'.
-- xda app / Pristine No-Mod CM9b3 / DXKL1 baseband / GT-I8150 --

Tx u all, I've just upgraded to CM10a1 and the problem is gone!
What I did:
reboot into CWM
NANDROID BACKUP
wipe cache
wipe dalvik cache
wipe data/factory reset
wipe battery stats
wipe internal memory (/sdcard)
installed CM10a1 zip from /external_sdcard
installed gapps for CM10a1 from /external_sdcard
fix permissions
reboot

[.::MDT::.] said:
Tx u all, I've just upgraded to CM10a1 and the problem is gone!
What I did:
reboot into CWM
NANDROID BACKUP
wipe cache
wipe dalvik cache
wipe data/factory reset
wipe battery stats
wipe internal memory (/sdcard)
installed CM10a1 zip from /external_sdcard
installed gapps for CM10a1 from /external_sdcard
fix permissions
reboot
Click to expand...
Click to collapse
Good job mate...
Just one point....I noticed you mentioned creating a nandroid backup......there is a good chance that if you use that backup, the issue you had will return......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2

keithross39 said:
Good job mate...
Just one point....I noticed you mentioned creating a nandroid backup......there is a good chance that if you use that backup, the issue you had will return......
From my Galaxy W on CM9 and CWM6 with Tapatalk 2
Click to expand...
Click to collapse
Yeah, I hope I'll not need it anyway!