Heya
I have had a quick scan through the dev sections and so on before asking this..
One of the lads at work has a S3 and he is dual booting roms - is this possible with any of the Note2 kernels or roms? (not sure how it all works being totally honest either)..
(looking to flash one of the touchwiz based roms and over time move over to the CM10 roms where they stabilise a little more)
Thank you for any answer
You could probably use CWM to switch between two separate backups of different ROM's, but that would be very cumbersome.
I would also want to know if this is possible with our SGN2 n7100.
BUMP!
Dual boot is enabled by a kernel , not a rom
Verstuurd van mijn GT-N7100 met Tapatalk
gee2012 said:
Dual boot is enabled by a kernel , not a rom
Verstuurd van mijn GT-N7100 met Tapatalk
Click to expand...
Click to collapse
Any Note2 kernel that supports dualboot??
tirano said:
Any Note2 kernel that supports dualboot??
Click to expand...
Click to collapse
Hi,
yes I have compiled a dual boot kernel using the source code from the S3, and I am testing it at the moment.
Cheers
Corey
fishingfon said:
Hi,
yes I have compiled a dual boot kernel using the source code from the S3, and I am testing it at the moment.
Cheers
Corey
Click to expand...
Click to collapse
Great stuff! thanks.
keep us posted!
Whoooooo!!!!!!!! Nice news guys!!!!!!! hope it'll work!!!!!
any news, you can make dual-booting
Anyone created dual boot kernels???
Sent from my GT-N7100 using xda premium
You can view here for the latest
http://forum.xda-developers.com/showthread.php?t=1980793
Cheers
Corey
Sent from my GT-N7100
If I helped you, please hit Thanks..
Jumping on this thread to keep updated with any news.
Keep up the good work.
Related
Hey,
I watched on Nexus One section, and i seen this topic.
Will this work with a MIUI ics rom ? (MIUI_Au rom)
Thanks in advance,
Bye
and hence it will only work with the 2.6 kernel.
Click to expand...
Click to collapse
I highly doubt it.
bortak said:
I highly doubt it.
Click to expand...
Click to collapse
+1
Sent from my HTC Desire using Tapatalk
Ok, thanks
But can i install a 2.6 kernel with this rom ?
You can not. You should only use kernels which are programmend for ICS.
Sent from my HTC Desire using Tapatalk
hey everyone! sorry for the super noob post.
I'm currently using a htc one x international and have read that the faux kernel works very well. I was also wondering will it work with the current parandroid rom. (currently on my device)
sorry if this has already been asked. im currently at work and do not have the time to browse!
mods feel free to remove if so.
Thank you.
You have to repack the kernel then yes
Sent from my HTC One X using xda app-developers app
Tugs4life said:
hey everyone! sorry for the super noob post.
I'm currently using a htc one x international and have read that the faux kernel works very well. I was also wondering will it work with the current parandroid rom. (currently on my device)
sorry if this has already been asked. im currently at work and do not have the time to browse!
mods feel free to remove if so.
Thank you.
Click to expand...
Click to collapse
yes, you can repack it and use it
try this automated toolto repack it urself, its good:
http://forum.xda-developers.com/showthread.php?t=1815607
Phew! Thanks for the info is the repacking pretty straight forward!??
Sent from my HTC One X using Tapatalk 2
Tugs4life said:
Phew! Thanks for the info is the repacking pretty straight forward!??
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
yes, its pretty easy, just follow the steps given on the thread link i posted above
I thought faux was only for ICS ?
ady_seray said:
I thought faux was only for ICS ?
Click to expand...
Click to collapse
no, it works on JB ROMs too
many people have used it
First off, thank you so much to XplodWild for his CM10 nightlies and also to Untermensch for his CM10 source / fastboot build in which I used to make this a ROM flashable in Recovery. Also, that you again to Untermensch for letting me repackage and redistribute his work.
Click to expand...
Click to collapse
This ROM is a modified CM10 build for us users that upgraded to the JB OTA and are stuck with the JB Bootloader. It was built from source with cherry picks from the TF700t source to be able to boot on our tf300t.
I will keep at this to get everything working correctly and also clean this thread up eventually but i wanted to get it out for alpha testing. It seems really solid to me so far
What Works
Wifi
Bluetooth
Camera
Camcorder
HW Acceleration
Sensors
Rotation
Video Playback
Sound
Power and volume buttons
ADB & USB
Internal & external sdcards
Themes
What Doesn't Work
GPS
Maybe More
Downloads
Current Build for JB Bootloader
Google Apps 10/11/12
Click to expand...
Click to collapse
reserved for me
Christmas come early boys!!!
Is it based on latest CM10?
Edit: Thanks! ^_^
Edit2: Seems to be based on mondays nightly.
Sent from my GT-N7000 using xda premium
stekarson said:
Is it based on latest CM10?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Incoming noobie question! (yes, I've searched).
Which version number is the JB-bootloader?
I would like to know because I'm in serious doubt of my version. I haven't accepted the ota. And I'm on Jelly Hydro rom. (which, if I can remember correctly, made me flash Jelly Bean Bootloader.)
I hope someone can help :good:
Turbii said:
Incoming noobie question! (yes, I've searched).
Which version number is the JB-bootloader?
I would like to know because I'm in serious doubt of my version. I haven't accepted the ota. And I'm on Jelly Hydro rom. (which, if I can remember correctly, made me flash Jelly Bean Bootloader.)
I hope someone can help :good:
Click to expand...
Click to collapse
Yes, if you're running jb hydro, you have the jb bootloader.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
dergrafi said:
Yes, if you're running jb hydro, you have the jb bootloader.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Click to expand...
Click to collapse
Thank you.
Flashing right now. Will report back
Back:flashing and restoring apps went fine. Been playing around a little and it feels faster than Hydro. And I just missed the options by CM. I'm now downloading untermensch's kernel and enabling some scripts
awwwwwwwwwwwwwwwwwww yeahhhhhhhhhhhhh
awesome, will load when i get home, stuck at stupid work with stupid no wifi
Very nice work, keep it going!
Flashed this ROM the second i found the thread. Great job guys!!! I came from clean 2.5 and i had to do a factory reset in order to flash the ROM. Running great so far. Will edit this post if i find any bugs.
Thanks everyone! Also, make sure to thank Untermunsch and XplodWild for their work.
Please use this thread to report any bugs you find. Please keep it clean and no flaming or trolling. All I ask is that you stay on topic
Wifi doesn't work for me
Will work for TG?
Devil Trigger said:
Wifi doesn't work for me
Click to expand...
Click to collapse
Works for me. Check MD5 and make sure you wipe before flashing!
Well, for me everything seems to work fine.I'm just waiting for the gps fix.Thanks a lot!
Hey guys, can anyone confirm this flashing successfully using TWRP?
babymatteo said:
Hey guys, can anyone confirm this flashing successfully using TWRP?
Click to expand...
Click to collapse
I did. Went trough flawlessly!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
So is gallery reboot a bug everybody has? wanted to flash, but I need my gallery :crying:
-angel* said:
So is gallery reboot a bug everybody has? wanted to flash, but I need my gallery :crying:
Click to expand...
Click to collapse
I don't have that problem, actually haven't found any bugs. Don't use gps so that's not really relevant
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
hello everyone.
I'd like your opinion, that it is the best rom based on the stock.
I prefer Roma jb but clearly the camera is very bad, so it s why I go back to the ics.
I am under the Xtxperience 8.1 but it is not very fluid at home.
Thank you for your help
You have KA Speed, XTX and MIUI based on stock only.
Sent from my LT26i using Tapatalk
the MIUI is not stable but I think a long time ago, it is better now?
fabidesca said:
the MIUI is not stable but I think a long time ago, it is better now?
Click to expand...
Click to collapse
I don't use it since that time, honestly. I know only those still maintened, that are stock based.
Sent from my LT26i using Tapatalk
fabidesca said:
hello everyone.
I'd like your opinion, that it is the best rom based on the stock.
I prefer Roma jb but clearly the camera is very bad, so it s why I go back to the ics.
I am under the Xtxperience 8.1 but it is not very fluid at home.
Thank you for your help
Click to expand...
Click to collapse
I highly recommend you using dual boot Mod to get both smoothness from JB and quality camera from stock ICS.
Sent from my Xperia S using Tapatalk 2
Very good idea! I had not thought about that!
how is it done?
fabidesca said:
Very good idea! I had not thought about that!
how is it done?
Click to expand...
Click to collapse
Install the ROM you want to be the native one, install dual boot kernel (optional: install any kernel you want for native ROM, but search for it in the Dual Boot kernel thread). Then search for the ROM you want for loop and install it (always from the Dual Boot thread, or it won't work).
Sent from my LT26i using Tapatalk
What is the kernel dual boot?
fabidesca said:
What is the kernel dual boot?
Click to expand...
Click to collapse
The one on the dual boot thread.
Sent from my LT26i using Tapatalk
The primary purpose of opening this thread is there is no other installer for CM11. If we want to switch between Sony and CM11 ROMs we need to fastboot flash Kernel each time. So to remove that hassle I've created this installer
Features:
Stock CM11 kernel + Double tap 2 wake by nikhiljan93
Note:
P.S the latest CM11 ROMs seem to only work with newer GAPPS . I've only tested on PA GAPPS 30-12-13
Downloads:
d-h.st/KPq
Sources:
https://github.com/allspark2020/android_kernel_sony_apq8064/tree/cm-11.0. P.S I'll update the repo once I figure out how to use GITHUB
Credits:
@FXP
@DooMLoRD
@Nikhiljan93
@CM Team
Thank you so much. Please add a post for future. Like changelogs
Gesendet von meinem C6503 mit Tapatalk
SafiXS said:
Thank you so much. Please add a post for future. Like changelogs
Gesendet von meinem C6503 mit Tapatalk
Click to expand...
Click to collapse
I'll only update this and hence no changelogs. It's only stock kernel. I'll try making my own later
Works perfectly
Flashed the boot.Img from flashtool...... Btw what are those additional wlan modules for?
For the need of it... am using the 3rd jan 2014 nightly and on ART runtime
Sent from my C6503 using Tapatalk
xyge said:
Works perfectly
Flashed the boot.Img from flashtool...... Btw what are those additional wlan modules for?
For the need of it... am using the 3rd jan 2014 nightly and on ART runtime
Sent from my C6503 using Tapatalk
Click to expand...
Click to collapse
lol my phone doesn't seem to want CM . :'(. Flashed it heck number of times. Thanks for the feedback
allspark2020 said:
lol my phone doesn't seem to want CM . :'(. Flashed it heck number of times. Thanks for the feedback
Click to expand...
Click to collapse
Haha... Try a clean install bro... also dont install gapps at first (most of the gapps packages out there dont work too well)
Sent from my C6503 using Tapatalk
xyge said:
Haha... Try a clean install bro... also dont install gapps at first (most of the gapps packages out there dont work too well)
Sent from my C6503 using Tapatalk
Click to expand...
Click to collapse
Yeah. Now even the flasher works from out of nowhere.
GAPPS seems to be the culprit here
allspark2020 said:
Yeah. Now even the flasher works from out of nowhere.
GAPPS seems to be the culprit here
Click to expand...
Click to collapse
this kernel support fast charger?
s0x247 said:
this kernel support fast charger?
Click to expand...
Click to collapse
No just wanted what I told you guys in OP. Will try making my own kernel soon. I'll try adding that there
allspark2020 said:
No just wanted what I told you guys in OP. Will try making my own kernel soon. I'll try adding that there
Click to expand...
Click to collapse
Thanks for your effort and support the XL community ... keep my fingers crossed for your own kernel.
Amazingggg ?
Sent from my C6503 using Tapatalk
can it work on stock rom ?
can it work on stock rom ?
david19941110 said:
can it work on stock rom ?
Click to expand...
Click to collapse
Nope. This is for AOSP based Roms like cyanogenmod, AOKP, P.A.C, etc... You want to check out allspark's advanced doom kernel v19 thread for a stock kernel.
This kernel however is working perfectly. Double tap to wake is working flawlessly so far. That was what I missed most about running stock with doom kernel. And now I have it on aosp KitKat! Great work my friend
Sent from my C6503 using Tapatalk
possible to add color callibration tweaks like the kernels for nexus 4?
looked around but cant find any documentation or how to....any ideas?
How did you implement double tap to wake into stock cm kernel? I'm looking to do the same thing for my device
Sent from my MB886 using Tapatalk
tember1214 said:
How did you implement double tap to wake into stock cm kernel? I'm looking to do the same thing for my device
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
O think he cherry picked it from Doom Kernel
Sent from my Xperia ZL using Tapatalk
tember1214 said:
How did you implement double tap to wake into stock cm kernel? I'm looking to do the same thing for my device
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
The actual code was written by nikhiljan93 for xperia z, I guess, so it might not work for you. Anyway I looked at commits by nikhiljan83 in DooMLoRD's github and added them CM source
allspark2020 said:
The actual code was written by nikhiljan93 for xperia z, I guess, so it might not work for you. Anyway I looked at commits by nikhiljan83 in DooMLoRD's github and added them CM source
Click to expand...
Click to collapse
I flashed this kernel along with AOKP's 4.4 Rom, so far so good. How exactly does "Double Tap to Wake" work with this kernel? I"ve tried tapping the screen but it never comes on. Is there a setting I need to flip somewhere?
ej_424 said:
I flashed this kernel along with AOKP's 4.4 Rom, so far so good. How exactly does "Double Tap to Wake" work with this kernel? I"ve tried tapping the screen but it never comes on. Is there a setting I need to flip somewhere?
Click to expand...
Click to collapse
When the screen is off, double tap it really fast. It will wake up
Sent from my C6503 using Tapatalk
I wish it were that easy...any other recommendations?
Sent from my Xperia ZL using xda app-developers app