Develop Bugs

Help!!!! Sprint s2 stuck at Samsung logo

Help please I tried to flash calkulins 3.0 rom on my fiances phone and now it's stuck at the Samsung logo and I can't restore my stock nandroid... this is what I did I ran calkulins format all .zip then I flashed rom, then the bare rom converter .zip then I flashed the newest modem then rebooted and now phone is stuck in Samsung boot logo.... can anyone help our have suggestions to why this is happening
Sent from my XT912 using Tapatalk 2

It would be helpful to know what rom/kernal/recovery you were running before. Have you tried using download mode?
Sent from my SPH-D710 using xda app-developers app

I was on stock rooted el.29 with the rogue recovery and stock kernel
Sent from my XT912 using Tapatalk 2

Bmali said:
I was on stock rooted el.29 with the rogue recovery and stock kernel
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Your problem was having the stock kernal to do the flash. Best thing to do know is to flash a el26 CWM kernal using Odin and then reflashing the whole rom set up again.
Sent from my SPH-D710 using xda app-developers app

what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2

Bmali said:
what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
Apparently it gets you stuck at the s2 logo.
Sent from the terminus system using quantum entanglement

Bmali said:
what was wrong with flashing a rom on el.29? That's the version this rom is made for
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
After looking at your sig what kind of phone was it?
Sent from the terminus system using quantum entanglement

Sprint galaxy s2... so what you guys are saying is that I need el.26 to flash this rom? What roms are made for el.29
Sent from my XT912 using Tapatalk 2

I'd have thought you would be perfectly fine flashing from el29. So you can't get into Odin mode or CM recovery?

I thought some roms were compatible with rouge recovery only and some were only compatible with cwm recovery.?.?
Sent from the terminus system using quantum entanglement

gilbydakid said:
I thought some roms were compatible with rouge recovery only and some were only compatible with cwm recovery.?.?
So there are two different recoveries? Is clockwork the most used recovery? I odin backed to el.29 rooted does someone have a link for clockwork? Is rogue recovery not as good as clockwork
Sent from the terminus system using quantum entanglement
Click to expand...
Click to collapse
So there are two different recoveries?
Sent from my XT912 using Tapatalk 2

Bmali said:
Sprint galaxy s2... so what you guys are saying is that I need el.26 to flash this rom? What roms are made for el.29
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
I don't think it is possible to have the stock kernel and have rouge recovery. That would mean that you must of had a custom kernal which had included rouge recovery. If you mean you had stock kernel to being with you then you flashed the new rom using androids stock recovery which almost always fails when installing a new rom. The kernel I mentioned , EL26 CWM can be found here, flash it using odin and then reflash your whole rom setup. When you double click the file, it will self extract and a file should appear. That is the file you flash using odin in the PDA slot.

The file I flashed in odin was a rooted el.29 file then I used a tool that installed the el.29 rogue recovery... so I'm confused why a .29 rom won't install over a .29 base?
Sent from my XT912 using Tapatalk 2

Just put the phone back into download mode Odin el.29 rom that you can find in development section then from there just redo it.
Sent from my SPH-D710 using Tapatalk 2

I have already odin back to rooted el.29 but what I'm wondering is why would it change anything? It's already soft bricked once so how would it change this time? Should I be on .26 or .29 to flash a rom?
Sent from my XT912 using Tapatalk 2

I'm feeling dumb about all these questions... I'm new to rooting Samsung products I've had no problems with my droid x and droid razr so that's why it's getting discouraging trying to get this phone setup properly
Sent from my XT912 using Tapatalk 2

Bmali said:
So there are two different recoveries?
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
there is a rouge aka team rouge recovery and there is a regular old clock work recovery.

Bmali said:
I'm feeling dumb about all these questions... I'm new to rooting Samsung products I've had no problems with my droid x and droid razr so that's why it's getting discouraging trying to get this phone setup properly
Sent from my XT912 using Tapatalk 2
Click to expand...
Click to collapse
OK So sounds like (not too sure though) that you used sfhub's Autoroot package to root and add EL29+CWM+Rogue is that right?
Solution to get you back to a working EL29 stock (but rooted) running phone.
Power off the phone.
Go here http://forum.xda-developers.com/showthread.php?t=1433101 download the Download the EL29 full restore One-Click self-extractor and extract the file somewhere.
[Also make sure you downloaded and installed the Samsung drivers from this post, have a GOOD USB cable and that the phone is charged at least 50%]
Then start the file you downloaded: SPH-D710.EL29_CL852097_ROOTED-OneClick.exe
The power on your phone while holding the Volume Down button till you get the confirmation screen and press volume up to accept and enter Download mode.
Connect your phone to the PC and it should show up on some COM port (doesn't matter which one) in the Odin tool.
Press start adn wait till all is done. You will then have a working stock rooted phone.
Then take some time and read through all the stickies and tutorials in this section. Read especially the 'how not to brick' ones!
This phone is very different from the HTCs and Motorolas in how the system(s) is partitioned and how the recovery works.
Then take some more time and read a little more or you will surely turn the phone into an expensive fishing lure.
If you want to flash the FF18 (actual leak build) sfhub has a one click for that too! Safest way to go. And you can use his Autoroot package to add Agat's safe ICS kernel.
Welcome to the E4GT just be careful and you'll have more fun.
By the way Qbking77's videos are SUPER if you are new to this phone!

Yes I'm on stock rooted el.29 now
Sent from my XT912 using Tapatalk 2

[Q] Just got replacement S2, Need Root/CWM asap!

Had my old S2 for almost a year a it broke 2 days ago. It was replaced under advanced exchange, so I got a refurbed unit running FI27.
I am in the process of moving to another apartment and I don't have internet access, so I need to do this while I am at work today. I've tried to read all of the stickies for the past hour and I am more lost than ever.
It was so long ago when I rooted my original S2, that method obvioulsy no longer works.
Just need a link to what the easiest way to root and install a recovery on my device for FI27.
I know someone knows off the top of their head and can point me right in the direction. I'm in a time crunch and could appreciate the help!
TIA...

http://sxtp-forum.com/showthread.ph...27-Modem-Kernel-ROM-Root-Stock)&p=491#post491
That should get you root.

Or you could flash el26 one click exe from here: http://forum.xda-developers.com/showthread.php?p=26295021 and then flash a rom.
Sent from my SPH-D710 using Tapatalk 2

asd87 said:
http://sxtp-forum.com/showthread.ph...27-Modem-Kernel-ROM-Root-Stock)&p=491#post491
That should get you root.
Click to expand...
Click to collapse
So I used the no-data to flash and get root.
However, trying to get a recovery on. Can I just use Rom Manager to install CWM? I was going to use it flash CWM recovery, but it asked me to confirm the phone model, and I didn't see the sprint version listed.
Nevermind, I installed Agats FI27 recovery, all is well!
Thanks guys! Should be good now!!

No don't do that. Google mobile Odin lite and dl the free one from XDA. Then flash the kernel I linked for safety. Then you can flash anything.
Sent from my SPH-D710 using Tapatalk 2

supdawg said:
So I used the no-data to flash and get root.
However, trying to get a recovery on. Can I just use Rom Manager to install CWM? I was going to use it flash CWM recovery, but it asked me to confirm the phone model, and I didn't see the sprint version listed.
Click to expand...
Click to collapse
do NOT use rom manager w this phone to flash. Odin or mobile Odin.
Sent from my SPH-D710 using Xparent ICS Tapatalk 2

Read post 2 here..
http://forum.xda-developers.com/showthread.php?t=1953783
Sent from my SPH-D710 using xda app-developers app

Oh good glad to know you went the smart route. ^_^
Sent from my SPH-D710 using Tapatalk 2

Can I flash a recovery while on aosp?

Don't know of I can or not but. I wanted to be certain. Also which is more stable cwm, or twrp?
Ive always used cwm but I read that twrp fixes emulated SD card issues???.
Sent from my SGH-I747 using Tapatalk 2

AW: Can I flash a recovery while on aosp?
diazf09 said:
Don't know of I can or not but. I wanted to be certain. Also which is more stable cwm, or twrp?
Ive always used cwm but I read that twrp fixes emulated SD card issues?
Click to expand...
Click to collapse
AFAIK the clockwork doesn't depend on whether you are on aosp or else.
I guess the stability is about the same but I'd prefer TWRP because it's more userfriendly and has more features.
And as I never had emulated sdcard issues, i can't tell u anything about that.
Sent from my GT-N7100 using xda app-developers app

OK. Cool.. Where did u get your download for twrp? I tried using goo manager. But it says it was going to install a att version.. All Roms in too is att. Seemed sketchy.. Am I missing something ???
Sent from my SGH-I747 using Tapatalk 2

Did you flash an at&t rom? That's the main reason it'd do that to you. Check your build prop for i747 and d2att. Google how to do that if you aren't sure. Your SIG shows the use of it so I'm guessing you did.
Sent from my SGH-T999 using xda premium

AW: Can I flash a recovery while on aosp?
diazf09 said:
OK. Cool.. Where did u get your download for twrp
Click to expand...
Click to collapse
I got mine in the thread for my devices, if you can't find it go there http://goo.im/devs/OpenRecovery/, choose your device and download twrp
Sent from my GT-N7100 using xda app-developers app

mt3g said:
Did you flash an at&t rom? That's the main reason it'd do that to you. Check your build prop for i747 and d2att. Google how to do that if you aren't sure. Your SIG shows the use of it so I'm guessing you did.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yeah that's exactly what I did... Thanks
Sent from my SGH-T999 using Tapatalk 2

I used CWM for years and started having problems with it when I started flashing 4.2. CWM had some problems flashing the roms correctly and with the multiple profile storage and TWRP was a little ahead of them when it came to fixing those problems. So I jumped to TWRP and never looked back. I prefer it for serveral reasons. The interface is more friendly, backing up and restoring roms are a bit faster and the overall fetures will keep me with TWRP.

What's the correct method to flash another Rom?

I'm on ICS 4.0.4 just Rooted last night with custom recovery. So I just dl what JB Rom I want and flash in recovery like my HTC Evo Lte?
All this reading has got me confused as to what to do. Plus this being my first Samsung device doesn't help any.
Thanks for the help
Sent from my SPH-D710 using Tapatalk 2

Just follow the instructions for the specific Rom you want. All roms have their flashing instructions And the jb ones are more specific too. Those are listen in the thread for that Rom as well.
Sent from Tapatalk on my S2.

You need to do a full restore one click to GB27 full root restore which is jelly bean. Something in the system has to be formatted before you flash a custom jelly bean ROM.
RWilco has all the stuff you should need
http://forum.xda-developers.com/showthread.php?p=31961585

OK I'm on FL24 but I need to run GB27 next?
If so then it's OK to use the GB27 (rooted) (preserve user data) option?
Thanks
Sent from my SPH-D710 using Tapatalk 2
EDIT: ok i ran the GB27 so at this point i can download a JB rom and flash in recovery ?

scoot0073 said:
OK I'm on FL24 but I need to run GB27 next?
If so then it's OK to use the GB27 (rooted) (preserve user data) option?
Thanks
Sent from my SPH-D710 using Tapatalk 2
EDIT: ok i ran the GB27 so at this point i can download a JB rom and flash in recovery ?
Click to expand...
Click to collapse
You need to do the one that wipes data since you're going from ics to jb. It's going to delete whatever you have on the internal sd so back up the files. After you do that then you can flash a jb Rom on it. I'm on my phone right now so I can't really link you to the thread easily. Look for the jb roms they should have links to all you need to set up a jb Rom.
Sent from Tapatalk on my S2.

I've been reading a lot and it's my understanding that every time I flash a Rom I have to flash the kernel separate?
And all I read is CWM Recovery, is there not a TWRP Recovery for this device ?
And (Modems) this is included in all TW Roms. But if I flash cm or aokp Roms I have to flash this separate and use ICS modem?
Thanks
Sent from my EVO using Tapatalk 2

All correct.
Sent from my SAMSUNG-SGH-I337 using xda premium

And during flashing a Rom Tar via Odin for pc if the phone is unplugged b4 Odin finishs then that will Brick my phone ?
Sent from my SPH-D710 using Tapatalk 2

Very possible. Never unplug until the process is complete.
Sent from my SGH-I337 using xda premium

Yea just trying to figure out what would cause a (hard brick) on this device so that I know what not to do.
Thanks
Sent from my EVO using Tapatalk 2

scoot0073 said:
Yea just trying to figure out what would cause a (hard brick) on this device so that I know what not to do.
Thanks
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
It is hard to fully brick, but it can happen. Take your time and read as much as possible.. When I got my first Android device, Samsung Captivate, I spent the better part of 3 weeks reading before I even attempted root and another full day of reading for installation of a custom ROM. You always have to be prepared to have a paper weight on your hands. You can't panic if you get stuck in a bootloop. Rule of thumb, 95% of the time if it still turns on, it can be fixed. What I do now is read as much as possible before I even get the device. I was reading and researching for 4 days before I got my S4 had it rooted and ROMd in an hour after I got it.
Sent from my SGH-I337 using xda premium

Yea this phone is so complicated to flash roms and other things. And I thought My HTC one and HTC evo lte was hard. But I love trying out new phones so it keeps me from getting bored.
Sent from my SPH-D710 using Tapatalk 2

The E4GT is easy. Try figuring out the S4. That's what I am on now. There are so many different things to worry about.
Sent from my SGH-I337 using xda premium

One of the main reasons why I like HTC devices because when you flash the ROM the kernel is flashed at the same time if yr S-Off were this phone you have to flash the kernel separate from the rom and then you have to use ClockworkMod recovery which I don't care for. I prefer TeamWin recovery. But my wife's GS3 is similar to htc devices download the Rom and flash and it has TeamWin recovery. But I got this phone to flip so I'm not going to keep it but who knows.
Sent from my EVO using Tapatalk 2

[Q] Clueless at the moment

Ive looked thru the forums i apologize if i missed it. Ive got a sprint samsung galaxy note 2 running 4.3 ive tried to root and install a custom recovery using the toolkit, but it doesnt seem to take the custom recovery. if anybody could please help me.

I haven't tried rooting since 4.1.2, but I used ToolKit to root and it installed a custom recovery. From there, I just flashed the recovery I preferred to use. Maybe be worth while try using ToolKit. I believe there is an option to just install new recovery.

Manualy flash recovery through odin
Sent from my SPH-L900 using xda app-developers app

supertwin33 said:
Manualy flash recovery through odin
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
So i know ive gotta flash one of these but which one? Sprint Samsung galaxy note 2 4.3

which ever one you prefer first. I use TWRP. Some use Philz, which is based on TWRP. From what I've read, it may be good idea to go with Philz over TWRP when and after converting to Android 4.3; something about TWRP not backing up or restoring correctly. Obviously there is still ClockWorkMod (CWM). I can't attest to it because I haven't used it in over two years.

Odin doesn't work either.....I've been having the same problem. Been wanting to root my note 2 for some time now but to no avail.
Sent from my SPH-L900 using Tapatalk

try using odin3 v3.07 to flash philz 6.07.9 that works for me
SGNote2

clathyn1 said:
Odin doesn't work either.....I've been having the same problem. Been wanting to root my note 2 for some time now but to no avail.
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Have you tried KingoRoot method?

Haven't had the chance to yet.
Sent from my SPH-L900 using Tapatalk