Flashing boot.img in fastboot taking forever/not sending - HTC One V

Recently when I've been trying to flash in fastboot it either reads an error and fails sending the image (remote: not allowed), OR it hangs at "sending" forever.
Anyone else have this issue...?

Okay... i got it to work, but only by resubmitting the token to HTC and receiving a new unlock_code.bin.
then i tried to flash a different boot image and i had to do it again. hmm...

Related

[Q] Stuck unable to get into recovery from hboot

Everyone here is awesome.
first off.. I have
hboot0.83.0001
radio-5.09.00.20
I'm stuck at hboot can't get into recovery. I've searched all the possibilities and tried all of them so far. I'm either stuck at black screen or white HTC screen, sometimes with black bar across top sometimes not. I've tried the blind button pusshing and I don't have a gold card made.. so those didn't work. Even had help from a senior member, who was amazing help, just lacked experience with this phone.
We were thinking that we could push recovery from ADB but couldn't get the command lines to work.
Tried these lines so far..
" fastboot flash recovery recovery-clockwork-2.5.0.1-bravo-slcd.img "
resulted in this error
sending 'recovery' (4230 KB)... FAILED (status malformed (1 bytes))
finished. total time: 0.000s
so we tried this line
fastboot boot recovery recovery-clockwork-2.5.0.1-bravo-slcd.img
and then
fastboot boot recovery-clockwork-2.5.0.1-bravo-slcd.img
which resulted in
downloading 'boot.img'... OKAY
booting... FAILED (remote: not allowed)
could someone give me command lines to push recovery to the phone?
Or if needed an alternate out.. probably using ADB me thinks
as a side note, yes I've searched and yes I've tried other things. But none of the answers work. For some reason ADB doesn't recognize my device as being there, but when I search through fastboot it does... just get those error messages. Hoping a genius sees this and knows the issue

No access to Recovery and HOX doesn't boot

Hello
i have some problems with my HTC One X. Until 2 hours ago it worked perfectly and without problems. i didn't flash anything in the last few weeks, but theres ARHD (ICS) installed. But then suddenly it had a freeze, so i had to restart it with pressing the powerbutton for 10 seconds. Since then, it doesn't boot anymore and also i can't access the Recovery, i get a blackscreen if i try, But i come into the Bootloader, Fastboot is possible but doesn't work...
I tried to reflash the Boot.img, but there was an error: erasing cache FAILED (remote: 19000008)
I also tried to reflash the CWM Recovery but there was another error:
5.8.4.0-endeavoru.img
sending 'recovery' (5742 KB)...
OKAY [ 0.904s]
writing 'recovery'...
(bootloader) Format partition SOS done
FAILED (remote: (00030000))
finished. total time: 1.150s
So can anybody help me? All that I want is access to my virtual SD Card for saving my data, and can anybody tell me how and if I can "repair" my One X? And sorry for the bad english, i'm no native speaker...
you can try this, http://forum.xda-developers.com/showthread.php?t=1609190
Thanks, but it didn't help. When i tried to flash the images in fastboot almost the same errors as before occured...i absolutely dont know what to to now, i think i even can't relock the bootloader, flash the stock recovery and a RUU
Achsoistdas19 said:
Thanks, but it didn't help. When i tried to flash the images in fastboot almost the same errors as before occured...i absolutely dont know what to to now, i think i even can't relock the bootloader, flash the stock recovery and a RUU
Click to expand...
Click to collapse
what the error mate?
Hm, i don't really know. There are these Error-Codes, mostly "remote: 19000008" or "remote: 00000004" also with a 5 at the end, and it says "remote: not allowed" sometimes.

HTC One M8 Root failed - Australia

Hi there,
I have just tried to root my HTC one, and I am now stuck in the boot loader screen and it is showing *Tampered* at the top.
Can someone please advise me, or point in the direction of what I need to do now?
Thanks.
If it says tampered it should say unlocked right below it.... go to this site and follow the instructions to get full root. http://forum.xda-developers.com/showthread.php?t=2699065
jeanxx said:
If it says tampered it should say unlocked right below it.... go to this site and follow the instructions to get full root. http://forum.xda-developers.com/showthread.php?t=2699065
Click to expand...
Click to collapse
I should have mentioned that I only have a Mac.....
Yes it does say unlocked underneath it...
Suggestions?
millhhaus said:
I should have mentioned that I only have a Mac.....
Yes it does say unlocked underneath it...
Suggestions?
Click to expand...
Click to collapse
Once you have unlocked your bootloader then it will show you tampered.
Download a custom recovery (I prefer TWRP) and flash it via fastboot.
Then download @Chainfire Supersu flashable zip from his site and flash it in recovery.
You have rooted your phone.
Ater placing my device into fastboot mode, I have tried flashing my downloaded TWRP file to my HTC One in Terminal using these instructions:
Now let's flash your downloaded TWRP file to your HTC One. Type one of the following commands into your terminal window, depending on which file you downloaded above.
For the International editions, type:
fastboot flash recovery Desktop/openrecovery-twrp-2.7.0.2-m8.img
However I get the following error:
command not found
any help would be most appreciated.
Did you setup your mac to use adb / fastboot commands?
lazydesi said:
Did you setup your mac to use adb / fastboot commabds?
Click to expand...
Click to collapse
I feel like a total N00b at the moment. LOL.
No. How do I do that?
try this
http://forum.xda-developers.com/showthread.php?t=2638673
Thanks for that information.
Now, when I am trying and to flash TWRP via fastboot I am getting this error message:
ERROR: Unable to create a plug-in (e00002c7)
< waiting for device >
ERROR: Unable to create a plug-in (e00002c7)
millhhaus said:
Thanks for that information.
Now, when I am trying and to flash TWRP via fastboot I am getting this error message:
ERROR: Unable to create a plug-in (e00002c7)
< waiting for device >
ERROR: Unable to create a plug-in (e00002c7)
Click to expand...
Click to collapse
hi,
plz try CWM, M8 got some issues with twrp.
philz_touch_6.26.6-m8.img is the stable version plz try that.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/m8
So I am starting to move forward :
I have followed the instructions to install philz_touch_6.25.5-m8.img by flashing it to my HTC where I get the setup screen for philz_touch_6.25.5-m8.img. I cleared the cache and I then installed the UPDATE-SuperSU-vx.xx.zip using the install zip from sdcard and then rebooted the HTC.
Unfortunately I have come back to the bootloader screen.
For what the instructions say it should be working now, but it does not seem to be?
Now it seems that whatever I try I cant seem to get past the bootloader....
And when I power down from the bootloader, It shuts down for a few minutes and then boots back into the bootloader.
Not sure what to do now?
millhhaus said:
So I am starting to move forward :
I have followed the instructions to install philz_touch_6.25.5-m8.img by flashing it to my HTC where I get the setup screen for philz_touch_6.25.5-m8.img. I cleared the cache and I then installed the UPDATE-SuperSU-vx.xx.zip using the install zip from sdcard and then rebooted the HTC.
Unfortunately I have come back to the bootloader screen.
For what the instructions say it should be working now, but it does not seem to be?
Now it seems that whatever I try I cant seem to get past the bootloader....
And when I power down from the bootloader, It shuts down for a few minutes and then boots back into the bootloader.
Not sure what to do now?
Click to expand...
Click to collapse
is your problem similar to this?
http://forum.xda-developers.com/showthread.php?t=2784232
May be you are using the wrong version.If you have international device you should try international version of philz/cwm recovery.I would suggest you to use TWRP since it is basically meant for htc devices.
Why am I getting this "FAILED (remote: image error! (BootMagic check fail))" error message all the time?
Davids-MacBook-Air:desktop millhhaus$ fastboot flash boot cm-10.2.1-m7ul.zip
target reported max download size of 1830711296 bytes
sending 'boot' (198067 KB)...
OKAY [ 6.904s]
writing 'boot'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 6.905s
millhhaus said:
Why am I getting this "FAILED (remote: image error! (BootMagic check fail))" error message all the time?
Davids-MacBook-Air:desktop millhhaus$ fastboot flash boot cm-10.2.1-m7ul.zip
target reported max download size of 1830711296 bytes
sending 'boot' (198067 KB)...
OKAY [ 6.904s]
writing 'boot'...
FAILED (remote: image error! (BootMagic check fail))
finished. total time: 6.905s
Click to expand...
Click to collapse
because you are using M7 files mate. you need to use M8.
M7 - Htc one - 2013 model
M8 - Htc One - 2014 model
http://download.cyanogenmod.org/?device=m8

HTC One M9 RUU problem

Hey all!
I have an HTC One M9. I tried to run an RUU for my phone earlier, but the RUU gave me an error 155. I searched for the solution and found that I needed to lock my bootloader. I locked my bootloader and got the relocked status. I tried running the RUU again and it still gave me the same error 155.
Unfortunately, relocking the bootloader wiped the android system and the TWRP recovery too, so that when I try to go into recovery mode, it gives the error, "Failed to boot into recovery mode."
I tried flashing a zip file using fastboot oem rebootruu and then, "fastboot flash zip rom.zip", and it gives an error like
"target reported max download size of 800000000 bytes
Invalid sparse file format at header magi"
So, I'm totally stumped now
If anyone can present any solutions, I'll be extremely grateful.

Question I bricked my phone, any advice?

So, here I was thinking things couldn't hurt to do some customisation.
This evening, I flashed a custom logo... using fastboot. (fastboot flash logo logo.bin)
That was the last thing I saw on my device, it won't show anything anymore.
Any advice on how to get any connection to my device again?
Right... So as before I found the solution myself.
I used the BROM to reflash the logo with the proper image.
For whoever wants to know. I used the MTK bypass utility to bypass the authentication stuff, and the SP Flash tool to flash.
I did have to use libusb-win32 for the python part, took me some hours to figure that one out. All sources told me UsbDK would work for that.
Kind of relieved I actually managed to unbrick my phone.
Did you get solution?
As mentioned in the post right before you; yes.
Hello,
I'm a beginner in the field of flasing custom roms but I would really like to abandon using google on my phone and find your work here really awesome. So yeah, I hope my question doesn't sound stupid but I'm seriously stuck and hope I didn't completely break my phone.
I am using a Redmi Note 8 (2021) and wanted to flash lineageOS. So I unlocked the bootloader via my mi account, booted into fastboot mode (usb-debugging was of course enabled) and tried to flash twrp to recovery using the cmd-window via platform-tools.
This didn't work because when I typed:
./fastboot flash recovery twrp.img
I got the reply:
Sending 'recovery' (65536 KB) OKAY [ 1.743s]
Writing 'recovery' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
I therefore started googling and found a threat on xda where someone had solved the problem by replacing 'recovery' with 'boot':
./fastboot flash boot twrp.img
What I got was:
Sending 'boot_a' (65536 KB) OKAY [ 1.818s]
Writing 'boot_a' OKAY [ 0.827s]
Finished. Total time: 2.681s
After that my phone was bricked. I cannot enter recovery mode anymore and even fastboot mode appears a bit different (I don't see the bunny anymore, all I see is the word 'fastboot' in orange letters on a black screen). When I enter fastboot mode, the device is detected by my computer - the only sign that still gives me an inch of hope. When I'm not in fastboot mode my phone keeps vibrating and then turning of, then suddenly it vibrates again and turns on, the logo 'redmi' appears and then it suddenly turns off again - and it just keeps repeating this procedure.
I downloaded the mi flash tool and tried to flash the Xiaomi ROM, but that didn't work either - after about five minutes of waiting I get an error. I tried different versions of MIUI but keep getting errors. When I try to flash the Xiaomi ROM via cmd-window, as suggested here ( https://www.droidwin.com/unbrick-redmi-note-8-fastboot-commands/ ) I get this:
fastboot flash xbl_a xbl.elf
Sending 'xbl_a' (3449 KB) OKAY [ 0.105s]
Writing 'xbl_a' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
Is there anything left for me to do or should I give up and save money for a new phone?
I would be very, very grateful for help
You could try this: fastboot --set-active=b

Categories

Resources