Develop Bugs

TCT-Alcatel Move

Hi XDA geeks , pros and fans !
I'd like to start this new threadline concerning the freshly-appeared TCT MOVE handheld device marketed for the budget segment.As i understand it appeared in march or later this year and has quite good specs for the approx. 100 euro category.
Some details can be found on
http://alcatelonetouch.com/products/smartphones/move
Contrarily to some beliefs IT IS NOT a branded OT-908 ,rather a cosmetized one .It comes in black or silver / white , a bit heavy for it's size , and higher specs than the OT-908.
Concerning the hardware specs, i'll be coming back later with some accurate chipset and sensor details.For now
OS is Android Froyo v2.2.2.Looks like there will be official ROM updates,at the time being there is the OneTouch Upgrade v1.2 ,which downloads about 540 Mb chunked firmware files, and exits with error.
Memory is 512 Mb RAM , for user space is available about 300 Mb
512 Mb ROM flash, available to user about 160Mb.
SD card slot supports up to 32Gb MicroSD, the phone comes with a 2Gb one.
Camera is a 2.1Mpixel one.There is no secondary one,but the main camera is available for video calls,with Yahoo! Messenger i tested it myself.How to use it this way i will explain later.
GPS is amazing , if assistance software is used , the lock-on takes only seconds.
Sensors - linear acceleration sensor
- 3 axis orientation sensor
- 3 channel magnetic field sensor (digital compass)
- light sensor for illuminance detection
- optical proximity sensor , it seems not in use by operating system(or rather poorly)
Processor - 600 MHz Qualcomm ARMv6 compatible, min frequency is 122 Mhz, and deep sleep capability.Qualcomm MSM 7627 chipset

rooting ?
hi djada80.i should like to ask if you managed to root your phone ?

Yeah , it's quite simple.There are in the Android Market some free apps , i think the best which i also use is the one named Ginger Break.Just download and install it.Detailed usage info can be found here
http://forum.xda-developers.com/showthread.php?t=1044765

firmware upgrade
it seems that the branded ones somehow cannot be upgraded ! at this point i need assistance , so PLEASE , if there is anybody experienced in debranding Acatel smartphones, then YOU ARE MOST WELCOME !.I saw guys having problem with debranding T-Mobile Move , so let's DO IT !

cannot sync with windows
i cannot sync my tmobile move with windows.have a toshiba satellite c665 with win 7 .pls help !

connect phone to computer,enable usb tethering.install alcatel android manager on computer. Can be found here
alcatelonetouch.com/contents/download/T-Mobile_AndroidManager_2.2.1108.1645.rar
This should work,instead of Android Sync Manager WiFi ,the last has some issues with this phone ,do not use it.

Yahoo! messenger front camera
Contrarily to some beliefs THERE IS POSSIBLE TO MAKE VIDEO CALLS with front camera only on Froyo 2.2.It is quite simple:
1.) if you have any version of yahoo apps , remove them all
2.) install Y!Messenger v1.3.2 , the afferent audio and video plugin and
optionally Y!Mail v1.3.2
Nothing fancy with it , just works.Remember, DO NOT UPDATE from Market.
Might also check this,if it doesn't work
http://forum.xda-developers.com/showthread.php?t=1087769

remove bundled apps ?
Hi !
Is there a way to remove some of the unnecessary factory shipped apps ?

RE
Yes , there is. So the smart method vould be to remove them from phone memory , and eventually install it on SD Card , if they are (and they are) UNMOVABLE.
Or just leave them ,anyway a factory reset will restore all the shipped applications.
1.) [optional] install Android SDK with platform 2.2 , sdk tools and eventually drivers.Enable USB debugging on device.On PC launch command prompt and change directory to \Android\android-sdk\platform-tools\.Run command
adb shell pm setInstallLocation 2
This enables SDCARD installation by default.Prerequisits to have ROOT ACCESS.
2.) with RootExplorer simply delete unwanted applications from \custpack\apps\ on device.Optionally you can make backups.
3.) if you made backups , the backed-up apk can be used to be reinstalled , NOW ON SD CARD
Good luck.

RE again
A reboot of the device is required to cleanup the junk after a forced delete.Or it can be done manually , BUT USE CAUTION.

i have an alcatel move branded Cosmote Move, i like this phone very much but i`ve managed to brick it the second time, first time i bricked and took it to waranty, they reinstall the software free of charge, now it has the same simptoms (pass the carrier logo and get stuck to carrier animation) and i need to send it to waranty again. i dont manage to get it unbricked. i`ve root it with gingerbreak but this phone doesnt go to recovery mode. i`ve searched the internet and google it for hours, but nothing.
if anyone knows how to do it please tell me, in the user manual says hard reset vol - and power, get stuck whit touch buttons light up and screen black!!
thanks in advance

re Themaster
it's not a brick yet i suppose , though you didn't specify how you managed to "brick" your phone.a nice clean reflash would solve the problem , probably you deleted some system files while in root mode.again did you use root explorer or something similar ?
try a factory reset as it follows:
1.) turn off the phone
2.) press vol up and the power on and hold the buttons pressed for about 1 minute
3.) the phone boots up , android logo appears and then an animation with some sort of thrashcan or whatever
4.)wait until it finishes , then the phone shuts down automatically.power on the phone and it will be restored
Beware ,battery must be at least 70 % charged or kept in charger , NOT USB connected to PC.
This restores phone to factory state , but not all the applications from /custpack/apps
Best regards !

Useful Key Combinations
These keypress modes apply on a shut down phone
Hard Reset - reinstalls android core system from ROM , deletes user data and misconfig
key combo : vol up + power on long pressed until trashcan animation appears
Flash Mode - used for ROM update , useless momentarily
key combo: vol down + power on long pressed , black screen appears and touch buttons lit up
Root access , mount filesystem with root access ,DANGEROUS !
key combo : home + power on long pressed until boot

build environment under Ubuntu
Lately, there has been some problems setting up an Android build environment under Lucid Lynx, as i've seen many have been complained for the missing java5 jdk.
For Romanian users: seems to be a problem with the Romtelecom DNS servers , when adding Jaunty or Dapper repositories to Lucid.
Use Google DNS as alternatives 8.8.8.8 and 8.8.4.4.This works.

From what I've been able to determine. The move and 908(s) are the same hardware with with only cosmetic differences. Something is different in software, I've been unable to root my 908s with ANY tools I've found.
I was also unable to use ADB under windows. The handset apparently requires four drivers, I was only able to find three of them. I got the Alcatel tools to work, as well as tethering, but no ADB. i didn't have any such issues under Ubuntu, but without root it isn't helpful.
I could not locate a stock rom or source anywhere on the Alcatel sites, so I sent a GPL request, i'm waiting to hear back.

UPDATE
After a long night I managed to root my 908s. I'll write out the jist of it, but I was flying by the seat of my pants, fueled by caffeine and sleep depervation. DON'T consider this a HOWTO.
First off, to the best of my knowlage there is no one click solution as of yet. As I said before still missing the driver that makes ADB work in windows, and handset based solutions didn't pan out. A little reasearch showed that the OT-990 has the same chip/ram and ROM space as ours. The screen is bigger, and I don't know what board is in it, but on a hunch I figured it was close enough. So I went here: http://forum.xda-developers.com/showthread.php?t=1164391 in the hopes that some sort of combined effort in future ROM development would be possible.
Yes that's right folks its a guide to MANUALLY root you handset with ADB. So not for the faint of heart. I didn't have high hopes, as issuing ls -l on either the sqlite folder or data threw a permission denied. So blindly I tried to push psneuter, busybox and su to /data/local. I almost fell off my chair when it worked! from there I used psneuter to get ADB into root, and managed to get the su binary to /system/xbin, and Superuser into /system/app. Superuser was installed, but still no root. So I checked out Root Checker to see what was going on. There are three places that su typically lives; /system/xbin, /system/bin, and /sbin. So I tried to put su in those folders. I got it into /system/bin but sbin is mounted read-only. I did not remount any directories, as the instructions are lacking syntax (I'm a little rusty with advanced mounting commands). I think things are mapped a little differently anyway. I still did not have root on the handset, so I then fired up Superuser to see what it could see. It saw the su binary, even though it wasn't working right. Then I thought well if it can see it, then maybe it can update and fix it. Sure enough after running the update to su in Superuser, (drumroll please...) I had working root.
So that's my story so far, I'm gonna give Alcatel a week or so to reply to my request. Then we'll take it from there. (Hey it worked on Huewei right?)
If a real dev should come across this, feel free to jump in. Its a solid little phone and has the potential to work on a range of handsets.

Gratitude
Thanks snkiz for your attention ! I am pleased that someone 'heavy' noticed my efforts of dedicating this threadline to the newcomer ! Indeed a small little phone with potential , maybe in time we get it gingerbread , cupcake ( or whatever ),even wm6.5 or 7 ...
As of ADB drivers , i had ADB from the first by these steps:
1.) http://www.alcatelonetouch.com/contents/download/move upgrade 1.2 Setup.rar , package contains the drivers
Now i noticed that when i try firmware upgrade , the utility downloads about half a giga of *.bin files and then exits with 'download failed error'.
2.) installed Android SDK , platform tools and Google drivers (i am not sure if necessary), the 2.2 platform (api 8)
Under Win7 cmd in platform tools , adb shell , su and on device pops up 'unknown has been granted superuser rights' and voila! in cmd shell i have '#'.Previously installed Gingerbreak.
My device is a Cosmote Move.

Ya, no I got that file too. I think they are "consumer drivers" because like I said I got all the Alcatel tools running but on my win 7 one driver was still missing, and I have pretty good googlefu. effin hate windows, this is why. I'm by no means a "heavy" but I am comfortable in a Linux environment, that helps alot. As to you being able to get gingerbreak to work, i'd bet that comes down to carrier firmware.
---------- Post added at 06:53 PM ---------- Previous post was at 06:39 PM ----------
djada, seeing as your the op could you please re-tag the thread with the model numbers to make it easier to find? cosmote, 908, 908s, and qualcom should do.
perhaps a mod could move this thread to the android hacking forum where it can get the proper attention please?

ADB driver
Driver files are from WHATEVER.\android-sdk\extras\google\usb_driver\ , if does not install automatically , can be forced.Anyway Win$ux 7 detects ADB interface , installs some sh.t from windows update server , and you'll have an ADB interface in Device Manager (working or not).Try to force the google drivers.
On the other hand ,i'm sorry but dunno how to move the thread , maybe i should start a new one in
http://forum.xda-developers.com/forumdisplay.php?f=565&order=desc&page=552
Just looked at it and they don't have Alcatel

Mod
Just started workin on a Cyanogen build , if i manage to build at least a kernal img , maybe i can lure in the Koush guy from github.We are in need of flash , backup , recovery tools.Not as lucky as the Samsung or HTC guys ...

ZTE U950 - Root, Recovery, ROM (& Google Play)

I AM NOT RESPONSIBLE FOR ANY NEGATIVE IMPACTS OR CONSEQUENCES ON YOUR PHONE IF YOU SO CHOOSE TO USE THIS GUIDE.
I own the ZTE U950 and had realized that there is very little information (in English) on how to do anything beyond stock for this incredible phone. After hours of research and translation I was able to figure out everything needed to get this phone to a "better" state. Since then I - and other XDA members - have been trying to keep the ZTE U950 alive...
ZTE U950 SPECS
NVIDIA TEGRA 3 (1.3MHz)
1GB RAM
4.3" Display (480x800)
5MP Front Camera/0.3MP Back Camera
Android OS 4.0.4
DRIVERS
Here are the "Join Me" drivers so that your PC can recognize the ZTE U950.
KERNEL
Stock - This is the stock kernel's source file.
Custom - This is a custom kernel for stock ROMs that can be OC'd to 2.5GHz.
ROOT
1) Make sure you have USB Debugging Mode and Unknown Sources checked in your phone Settings.
2) Connect your phone to your PC.
3) Download and open Genotools.
4) The program will open, click the 4th tab (last tab on the right).
5) Ensure that your phone is plugged into your PC.
6) Click the 2nd ROOT button.
7) A popup window will appear, press OK.
8) Your phone will then have a popup window, click the "Restore My Data" option.
9) The phone will restart several times, leave it for a few minutes.
10) This is the odd part... The phone will likely not stop restarting, and when you try to click the unlock key for the screen, it will automatically restart. Disconnect the phone. It should continue to restart.
11) Force the phone off.
12) Restart the phone.
13) If you have SuperUser, you are then rooted. If not, repeat these steps.
ROOT - NEW VERSION #1 (UNTESTED!):
1) Download the file here.
2) The instructions read verbatim are, "1 If your phone is not acquired before the ROOT privileges, we choose 1 root [next line] 2 after enter". Which I assume means click root, then enter...
ROOT - NEW VERSION #2 (UNTESTED!):
1) Download the root kit here made for the ZTE U950 (it uses the Chinese recovery), and extract to your desktop.
2) On your phone, go into Settings and enable USB Debugging under Developer options.
3) Connect the phone to your PC (Windows OS should fail to recognize the device).
4) Run either DrvInst_x64.exe or DrvInst_x86.exe. If you are unsure what you have, run both, the wrong one will fail with an error message.
5) After installation, unplug and replug your phone.
6) Go into Device Manager. You should be able to see a "ZTE TD Handset ADB Interface" under the "Android Phone" section. If you don't, reinstall the drivers again.
7). To root, simply run the U950_Root.bat file, and follow the instructions.
RECOVERY (CWM/TWRP)
1) Download the Chinese CWM or English TWRP recovery.img and place it into the root folder of your external SD card.
2) Download a terminal emulator. (If you are unable to download one, use the APP TRICKS described near the bottom to install a terminal emulator onto your phone.)
3) Open the terminal emulator.
4) Type in "su" then hit the return button.
5) Now type in the following:
dd if=/sdcard/recovery.img of=/dev/block/platform/sdhci-tegra.3/by-name/SOS
(and press the return button)
6) There should be a few lines beginning with something like 14052 or 14272, if not, then the above input was not typed correctly. If so, the recovery should now be installed.
GET INTO RECOVERY
1) Turn the phone off.
2) Hold the Power button + Volume Down button. When the ZTE logo comes up, count two seconds and then let go of the buttons.
3) The phone will enter into recovery. Use the Volume rockers for up and down and the power button to choose (if on CWM), or simply touch the buttons (if on TWRP).
4) I will describe the standard processes here if using CWM - the menus are top-to-bottom on the phone, which are written left-to-right here:
The Main Menu:
[*] Reboot system now
[*] Select zip to flash/install
[*] Wipe data
[*] Wipe cache
[*] Backup and restore
[*] Flash memory/Format
[*] Advanced setting
[*] Turn off phone
The Zip Menu:
[*] Install from zip
[*] Install from internal
Wipe Date:
[*] Confirm wipe data
[*] Do not wipe data
Wipe Cache:
[*] Confirm wipe cache
[*] Do not wipe cache
Backup and Restore:
[*] Backup
[*] Restore
ROMS (ALWAYS MAKE A BACKUP BEFORE FLASHING ANY ROMS TO THIS PHONE!)
Factory ROMs (in order of release)
U950V1.0.0B02
U950V1.0.0B14
U950V1.0.0B18
U950V1.0.0B22
U950V1.0.0B04
U950V1.0.0B05
Custom ROMs (in no particular order)
6240-jingjian
MIUI3.3.7
CustomRom-B14
DeodexedMIUI3.3.7
EN&CN-MIUI3.3.7-msdfyc4zwg
MIUI3.2.8-ysdfyc4zwg
Signed-121223-MZECN-CookedROM
SignedROM
V2.0.0-Hiapk-XC-iSignFile
12-21ROM
4.2CameraROM
RandROM
MIUI1220
V2-MaunJ
CM10/.1 - HeatSka Edition
This should be listed under ROMS, but I felt that it needed its own section. Ska and I worked on this for quite some time getting all the kinks worked out. We did not create the original version of this unofficial Cyanogenmod port, but the original had many issues and was not maintained after its initial release. All the major problems have been worked out in our HeatSka edition.
The ROM was initially CM10 (4.1.2), but it has been mixed with files that list it as 4.2.2 (CM10.1) under the information section. In either case, it is Jelly Bean! Aside from the fixes we have implemented, there are also numerous tweaks and mods for UI speed, network speed, battery consumption, app installs, and much more. There is almost no theming, just enough to know that this is our enhanced (and better) variation.
The only known issue that may arise is CPU throttling. We have included an app called, "LGP880 Booster". This app will allow a CPU speed boost when turned on, with a temperature threshold to prevent overheating. If you wish to save battery, only enable this app when playing a game or using CPU-intensive apps.
DOWNLOAD: CM10.1/2 - HeatSka
FLASH A ROM
1) Download a ROM.
2) Place the ROM in the root of the phone's SD card.
3) Enter into recovery.
4) Wipe data.
5) Wipe cache.
NOTE: Wipe data and cache are the Factory Reset button in TWRP.
6) Follow the menus to get to the ROM in the SD card.
7) Click the power button to choose the ZIP if on CWM (or just push the designated button on TWRP).
8) The ROM is being flashed.
9) Follow the left arrow (the last selection) on the menus to get back to the main menu.
10) Choose the first option on the main menu to reboot on CWM (or click Reboot followed by System in TWRP).
NOTE I: The ROM will probably be in Chinese. Find the Settings icon and click it. Go down to the Language & Input setting and click it (there is a capital "A" next to it). Click the top setting and choose the desired language.
NOTE II: There may not be an English keyboard available, so download this 4.2 keyboard ZIP file and flash it in recovery.
INSTALL GOOGLE PLAY
1) Download and install a file explorer like ES Explorer (free) or Root Explorer (paid). (If the phone is unable to download a file explorer, use the APP TRICKS described near the bottom to install one onto the phone.)
2) Download and take the three files from the RAR file for Google Play and place them in a folder on the phone that can easily be reached with a file explorer.
3) Open up a file explorer.
4) Move the three files to the "/System/App" folder on the phone.
5) Give the three files each the same permissions (Read for all three groups, and Write for User).
6) Restart the phone and Google Play should now be installed.
Notes: a) There are cases where two Google Play store icons may appear. They should both work and not cause problems.
b) If the store does not show, redo the process above.
c) This trick does seem to work on other Android devices as I have successfully done this on a Galaxy Note N7000.
INSTALL FACTORY ROM
1) Download a Factory ROM from above and place the "update.zip" file in the root of your external SD card.
2) Go to Settings.
3) Go down to About Phone and click that.
4) Click on System Updates.
5) Remove the check mark.
6) Click OK.
7) The phone should restore to whichever factory update file was used.
APN FIX (MOBILE DATA FIX)
If your mobile data is not working then use this method to fix your APN:
1) Revert to stock ROM (or any custom ROM where mobile data does work).
2) Download and open a file explorer like Root Explorer or ES Explorer.
3) Go to /system/etc
4) Copy "apns-conf.xml".
5) Go to /sdcard/
6) Paste "apns-conf.xml".
7) Flash ROM.
8) Download a file explorer and open it.
9) Copy "apns-conf.xml".
10) Go to /system/etc
11) Paste "apns-conf.xml" (overwriting the existing file).
12) Reboot the phone.
13) Mobile data should now work.
GAME SUPPORT FOR ZTE U950 (WORKS ONLY FOR U950V1.0.0B02)
Note: I have not tested this. Apparently the first firmware version of this phone is not recognized by Google Play for certain Tegra games. If this occurs, try the following method.
1) Make a backup of the System folder. (It is easier to make a Backup of the entire ROM in recovery...)
2) Insert the build.prop file from this file.
3) Clear the Data for Google Play store (Settings > Apps > Google Play > Clear Data).
4) Reboot the phone.
5) When opening Google Play it should make give their agreement again. If it doesn't, then Data has not been cleared.
6) The rows modified in the build prop is as follows:
Desire ro.product.model = X
HTC ro.product.brand =
Desire ro.product.name = X
Desire ro.product.device = X
...
HTC ro.product.manufacturer =
AGAIN, I HAVE NOT TESTED THIS SO USE AT YOUR OWN RISK!
APP SUPPORT FOR ZTE U950
Note: Some apps will throw package errors after downloaded and then will not install. This method will help a lot of these errors from occurring. It doesn't work for all, but it will for some [tested with Dead Trigger 2].
1) Download this file.
2) Use a file explorer like ES Explorer (free) or Root Explorer (paid) and put com.google.android.maps.xml in /system/etc/permissions
3) Put com.google.android.maps.jar in /system/framework
4) Reboot the phone and now apps should install without issue.
DEAD TRIGGER 1
1) Enable graphics details to High in Setup/Others.
2) Exit the game.
3) Use a file explorer like ES Explorer (free) or Root Explorer (paid) and go to /data/data/com.madfingergames.deadtrigger/shared_prefs/
4) Edit the com.madfingergames.deadtrigger.xml file.
5) Change <int name=”UnityGraphicsQuality” value=”1″ /> to <int name=”UnityGraphicsQuality” value=”2″ />
6) Change <int name=”OptionsGraphicDetail” value=”2″ /> to <int name=”OptionsGraphicDetail” value=”3″ />
7) Save the com.madfingergames.deadtrigger.xml file.
8) Remove all write permission on User, Group and Other for the com.madfingergames.deadtrigger.xml file.
9) Delete the com.madfingergames.deadtrigger.xml.bak file.
Note: This technique works on any non-Tegra device.
APP TRICKS
If apps cannot be downloaded normally (from Google Play), this guide will show an alternative method on how to install them:
1) Download the necessary apk file online.
2) Open the 4.2LatinIme.zip with 7zip or WinRAR and delete the keyboard APK (or keep it if not installed yet).
3) While the ZIP is open go into "/Sytem/App" and place in it any APK you want installed.
4) Boot into recovery.
5) Flash the ZIP file.
6) Reboot and the app(s) should be installed.
Note: I have noticed that certain apps do not flash properly so an alternative APK needs to be downloaded. However, once you have the right apps to install Google Play, you should be able to download any apps from the store.
HARDWARE FIXES BY SKA
NOTE: Always work without the battery attached to the phone.
SIM Card No Longer Works
INFO: There is a diode which provides voltage to the SIM card. Somehow it has become loose, which disallows current to the SIM. Thus, the baseband cannot recognize the SIM card any longer.
FIX: The easiest way to fix and check something is to "re-flow" the PCB (printed circuit board). The modem soldering must be re-flowed in order to reconnect the loose diode and re-allow voltage back to the SIM card.
Touchscreen Not Displaying
Open up your phone. If you don't know how, then you won't be able to continue...
There are three connectors on the left soc side. Check the upper connector near the audio jack and try to seat with a pair of tweezers very gently.
There is a white line on every connector - apart from the battery connector - pull up straight. It must be exactly at the of the beginning of the brown clip when pulled downwards.
MISC
I have successfully paired this phone with a PS3 controller using Sixaxis. This is not unique to my phone as I have verified that there is support within the Kernel for this.
It does seem that Wii controller support can be turned on according to the kernel...
There are no known custom kernels for this phone, however, the incomplete Cyanogenmod ROM available does seem to use its own kernel.
The phone is "stuck" on ICS 4.0.4 with almost every ROM. The incomplete Cyanogenmod ROM upgrades the OS to JB 4.1.2.
The phone is known to have heating issues on different (all?) firmware versions. While these do not seem to attribute to hardware failure, it is an annoyance.
Different firmware versions apparently produce varying levels of GPU performance: The best in GPU performance is U950V1.0.0B14, but this build may produce issues in some games. The worst in GPU performance is U950V1.0.0B18, but it is stable. The U950V1.0.0B22 is stable as well but has better GPU performance than B18. I have found no information on how well the first and last firmware versions perform in terms of GPU.
To disconnect the battery connector you need to place a spudger beneath and lift up. It is the same method used for the connectors of fans, temperature sensors, and the battery in a MacBook Pro 2006/7/8.

Thank you for this Tutorial.
Do you know a method to change language in CWM ?
Best regards

cmoegele said:
Thank you for this Tutorial.
Do you know a method to change language in CWM ?
Best regards
Click to expand...
Click to collapse
Unfortunately I haven't found anything that would suggest that you can. The best I could do is have one of my friends tell me what each section states, but that may be a long while from now.
The menus I have figured out and listed are the most necessary. The others are just icing I suppose.

Unable to switch it back on
Hi,
first of all, please excuse me if this is not exactly related to this post, but I see there is not much discussion around this device so I figured this would be an okayish place to ask.
I got my ZTE U950 just today, put my SIM and MicroSD cards in it, turned it on, all OK. I played with it for a while, changed the language into English, tried some apps, deleted lots of default installed Chinese apps (such as Baidu, QQ, Baidu maps, etc).
I run Debian on my machine, so this guide wasn't working for me. However, I tried to run Genotools on Wine and followed the first steps, but no pop-up showed in my phone and I decided that probably Wine wasn't forwarding the USB dev properly. The phone kept on working normally for a while, I even recieved a phone call.
Then I turned it off just to switch the SIM back to my old phone and, after that, I haven't been able to switch the ZTE back on again. At first I thought it'd be the battery running out (although it reported 50% left while it was on), but I've had it connected for about 30 minutes now and I still can't turn it on...
Do you guys know if there is something I can try?
Thanks a lot and excuse me again if I posted in the wrong place... (and if I have, could you please point out where should I post it?)
Bernat.
EDIT: Today I woke up, I pressed the power button and... surprise! It just worked!

No Popup on phone
Hello
I have tried to follow the steps as you have mentioned.
Root>2nd Button>Popup>ok
But nothing appeared on my phone.
Can you guide me what should I do.
I have USB debugging and Unknown Source checked but no popup appeared on my phone.

raoyasir said:
Hello
I have tried to follow the steps as you have mentioned.
Root>2nd Button>Popup>ok
But nothing appeared on my phone.
Can you guide me what should I do.
I have USB debugging and Unknown Source checked but no popup appeared on my phone.
Click to expand...
Click to collapse
Do you have the usb-drivers installed ? (doublechek in device manager for windows ) Sometimes Win7-64 or Firewalls block uncertified drivers to install correctly. For 7-64 you can press F8 during early boot and choose "force unsigned drivers" or something simiar. On linux you should go through an Android adb installation howto, to correctly get debuginterface running.
Once you have installed chinese recover you can install some prerooted images from the hungarion or chinese sites.
br
cm
PS: has someone skills for implementing other languages or removing the chinese letters on some menues ?

I just bought ZTE V985 which is also tegra 3 device. Can anyone help how to root it?
Sent from my HTC Desire using xda app-developers app

how to root zte v985
someone please tell us how to root zte v985.

3G
Hi guys,
does anybody know if/how it is possible to connect to a 3G network with this terminal? In the specs it says it can only connect to Chinese 3G networks, so I'd like to know whether this is a software or a hardware restriction.
If it's a hardware one, I guess the solution must be pretty complex...
Cheers!

alz_uk said:
someone please tell us how to root zte v985.
Click to expand...
Click to collapse
I was able to root my ZTE V985 couple days ago. Download root installation package from:
http://pan.baidu.com/share/link?shareid=68344&uk=2753639880
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
http://bbs.gfan.com/android-5226211-1-1.html
And Google translation:
http://translate.google.com/transla...=http://bbs.gfan.com/android-5226211-1-1.html

suunnittelija said:
I was able to root my ZTE V985 couple days ago. Download root installation package from:
http://pan.baidu.com/share/link?shareid=68344&uk=2753639880
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
http://bbs.gfan.com/android-5226211-1-1.html
And Google translation:
http://translate.google.com/transla...=http://bbs.gfan.com/android-5226211-1-1.html
Click to expand...
Click to collapse
Thank you very much my freind, you are a kind and intelligent person.
---------- Post added at 12:31 AM ---------- Previous post was at 12:27 AM ----------
nabax said:
Hi guys,
does anybody know if/how it is possible to connect to a 3G network with this terminal? In the specs it says it can only connect to Chinese 3G networks, so I'd like to know whether this is a software or a hardware restriction.
If it's a hardware one, I guess the solution must be pretty complex...
Cheers!
Click to expand...
Click to collapse
Hahaha you silly billy, i know whats happened to you! You got the ZTE U985 instead of the V985. The ZTE U985 only supports TD-SCDMA 3g network which is CHINA only. You should have bought the ZTE V985 which is WCDMA 800/1900/2100 mhz which supports western 3G networks. LMFAO. I feel sorry for you fella.

Where did you buy the v985 ? I only can find offers from 350-400$ and for this pricing I can´t find any real advantages buying a chinese phone , there is also no DualSim,and normally very limited languages ( chinese cwm?),....

cmoegele said:
Where did you buy the v985 ? I only can find offers from 350-400$ and for this pricing I can´t find any real advantages buying a chinese phone , there is also no DualSim,and normally very limited languages ( chinese cwm?),....
Click to expand...
Click to collapse
I bought it from fastcardtech.com, only 275 USD with free delivery.
From hardware specs point of view this is a really good phone, fast as my Asus TF700T tab with Tegra 3. It also supports WCDMA 900/2100MHz which are the most used 3G frequencies in EU. It does have only English and Chinese languages, but I used MoreLocale 2 to get more choices. More Locale does not change system language (like settings, caller app etc) so those will remain in English, but for example now other apps like Google play, Chrome etc. supports the language you have chosen in MoreLocale.
Sent from my ZTE V985 using xda app-developers app

cmoegele said:
Where did you buy the v985 ? I only can find offers from 350-400$ and for this pricing I can´t find any real advantages buying a chinese phone , there is also no DualSim,and normally very limited languages ( chinese cwm?),....
Click to expand...
Click to collapse
Dont get it wrong my mate the zte v985 is a beast of a phone + a smart piece of hardware. Only downfall i see is the limited rom/root/customization support since its new (october 2012)
Reasons why you should purchase the zte v985:
1. really supports APP2SD (install apps to external sd so you never run out of space and you dont have to throw away your phone when internal memory of 4GB gets full like most other android phones)
2. quad core cpu + 12 core NVIDIA gpu (theres websites full of games made only for this cpu + gpu)
3. USB OTG (using your superfast cpu and gpu together with usb otg you can turn your phone into an high class gaming system using two usb game controllers playing arcade roms and 3d games ON YOUR PHONE!). This is an awesome feature that not all phones support even some high performance quad core phones dont have this function.
4. 720P HD screen + 1080P HD Playback/Recording
5. Full MHL support (usb to hdmi)
6. Cheapest all round high performance quad core. Awesome price (£190) for a phone compared to other quad core high performance phones e.g galaxy note 2 @ £500
NOTE: if you would like to buy this phone for the price mentioned leave a message with your email or contact me i know a seller in china.
NOTE: Or you could wait another month or two and buy the new mtk 6589 quad core phones such as the UMI X2 which is quad core, DUAL SIM, usb otg, 2GB RAM, 32GB ROM and dirt cheap (£200!!!)
I get my ZTE V985 today through the post, cant wait till i get it!

Recovery in english language?
Hi
Anyone found Recovery in English language?

Google play
I can install google play, but if i open it, it immediatly shuts down again...
Any idea's ?

cwm zte u950 test 1 (build, 28 nov 2012) by me.
===================================
(cwm-u950-6.0.2.3-permanent)
-------------------------------------------
CRC32 : D2CD4005
MD5 : A1C6B72375B2E79100AA9BE52D0F30C2
SHA-1 : C7B3165D1E1F7463BFF16C0DE7747E6B3EC3F807
xxx.media*fire.com/download.php?0411sb2m1kkyrv4
(cwm-u950-6.0.2.3-temporary)
------------------------------------------
CRC32 : 830121A8
MD5 : 8239E70CB81548FE4427C505A5184749
SHA-1 : 9CF9CED3EC6CA2B79AE174E03A423435BB0FFFAC
xxx.media*fire.com/download.php?m90c896m17u0o9p
sorry.. i still need to learn..
please report cwm zte u950 test 1 (build, 28 nov 2012).

suunnittelija said:
I bought it from fastcardtech.com, only 275 USD with free delivery.
From hardware specs point of view this is a really good phone, fast as my Asus TF700T tab with Tegra 3. It also supports WCDMA 900/2100MHz which are the most used 3G frequencies in EU. It does have only English and Chinese languages, but I used MoreLocale 2 to get more choices. More Locale does not change system language (like settings, caller app etc) so those will remain in English, but for example now other apps like Google play, Chrome etc. supports the language you have chosen in MoreLocale.
Sent from my ZTE V985 using xda app-developers app
Click to expand...
Click to collapse
ZTE Grand Era V985 Recovery (support English)download link: pan.baidu.com/share/link?shareid=372147&uk=973327405
If you have any problems,please sent a email to me ,my email address is '[email protected]' ,i can help root your ZTE Grand Era V985,and install the recovery,the recovery includes English language.At last,the Android 4.2 for V985 will coming soon,maybe in April,if anyone need ,i will send to you.Thank you.

i found twrp for the zte u950 in english in this package, it is in the folder recovery_3 :good:
what do you think? is it possible to make the zt3 u980 to work with european 3g network? i thought to flash the baseband from zte v985 on the zte u950... do you think its possible?

More stuff in English
hey Heatshiver...u can add these in your OP
I found some roms HERE for U950 which support english language..and atleast instructions are in english
2 or 3 of them are based on MIUI ...
I've tried the 1st one...works perfectly so didn't flash others
Extracted img file of twrp recovery (english) from the package provided by superpfpf - attached in the post

Vsun i9 rooting

Hi, just received an Vsun i9 (also announced as Peter Pan) bought from China (Aliexpress). MTK6577 1Ghz, 512Mb 4Gb ROM, Android 4.0.4
It came without Play Store (and crashes if installed manually) , the google account doesn't sync, etc. etc. so it's the kind of phone chinese goverment loves (unfortunatelly for me)
I've tried to root with Superoneclick and z4root, but didn't suceed
I tried to install alternative market, like Getjar, but it seems it calls to Play Store apk, and also crashes with some downloads
Any ideas will be welcome

Kwoloo said:
Hi, just received an Vsun i9 (also announced as Peter Pan) bought from China (Aliexpress). MTK6577 1Ghz, 512Mb 4Gb ROM, Android 4.0.4
It came without Play Store (and crashes if installed manually) , the google account doesn't sync, etc. etc. so it's the kind of phone chinese goverment loves (unfortunatelly for me)
I've tried to root with Superoneclick and z4root, but didn't suceed
I tried to install alternative market, like Getjar, but it seems it calls to Play Store apk, and also crashes with some downloads
Any ideas will be welcome
Click to expand...
Click to collapse
Try this root method in the signature "Micromax A68"

prasad12ka4 said:
Try this root method in the signature "Micromax A68"
Click to expand...
Click to collapse
Thanks for the suggestion.
The Micromax A68 seems to be based on a non 3G chipset and is not dual core (MTK6577 is) should it work?

Kwoloo said:
Thanks for the suggestion.
The Micromax A68 seems to be based on a non 3G chipset and is not dual core (MTK6577 is) should it work?
Click to expand...
Click to collapse
Yes
As I have done the ROOT using MTK 6577 process

prasad12ka4 said:
Yes
As I have done the ROOT using MTK 6577 process
Click to expand...
Click to collapse
I looked for Micromax A68 in the forums and saw your post about unlocking it ... but probably because I am a newby I and never rooted before got lost among so much roms and downloads and din't manage to unlock (at least yet)
Anyway thank you for showing me the path, will keep investigating, I suppose it's part of the fun, even when my wife doesn't like having an android phone without acces to market

Finally I managed to root this Vsun i9, using Root_with_Restore_by_Bin4ry_v18
Now the cellphone is rooted, and with Super User installed, and also installed root explorer.
Next problem is that Play Store keeps crashing if installed, the Google account still doesn't sync and most of the solutions I found require copying files to /system/app , but when using Root Explorer I am not allowed to write on that folder.
By investigating, I understand I will need to install the gapps package (or install a rom that work with this phone), if I want to have the syncing and play store,
Can someone give me some clues about how to proceed next?
----
Just adding some useful info for people with same model.
When trying Superoneclick (that was always freezeing on Zerg Rush Step #7 on my Windows8), I was asked to execute as administrator.
I thought it would be good idea to run as administrator also Root_with_Restore_by_Bin4ry_v18, but was always receiving errors from the batch script, so I just thought it was not working,
Finally excuted once as normal user, choosed the "1) Normal", and that was all, my phone rooted!.
Don't forget to turn on the USB debugging option on the phone options.

I found that with Root Explorer there's a "mount r/w" option that let's you full access to system folders XD

Hello! I am thinking on buy this phone. Can you tell me how does it works? What do you think in general terms?
Is it a good phone? How about camera?
I have found the last ROM V0013 "VSUN_MT6577_4X4_OV5647_R007_02_CHINESE_V0013_TXD.rar" in a Chinese forum. Is it your phone rom?
If I update with this rom, can I root using Root_with_Restore_by_Bin4ry_v18 after that?
Thanks you so much!
Sorry for my English!

Any solution
I just recived my Vsun I9 and the phone is amazing for the money, but I have the same problem as everybody ells, Google play doesent work, has anyone find a solution?
Hans
PS I can recommend Amazon appstore as an temporary solution.
Kwoloo said:
Hi, just received an Vsun i9 (also announced as Peter Pan) bought from China (Aliexpress). MTK6577 1Ghz, 512Mb 4Gb ROM, Android 4.0.4
It came without Play Store (and crashes if installed manually) , the google account doesn't sync, etc. etc. so it's the kind of phone chinese goverment loves (unfortunatelly for me)
I've tried to root with Superoneclick and z4root, but didn't suceed
I tried to install alternative market, like Getjar, but it seems it calls to Play Store apk, and also crashes with some downloads
Any ideas will be welcome
Click to expand...
Click to collapse

How google play works on vsun i9
Dear Guys:
When you have a vsun i9 like me, root him and copy the google play app into the system map and install it from there with root explorer and everything works fine, because that app need all rights. Good luck. :good:
barbarhaj said:
I just recived my Vsun I9 and the phone is amazing for the money, but I have the same problem as everybody ells, Google play doesent work, has anyone find a solution?
Hans
PS I can recommend Amazon appstore as an temporary solution.
Click to expand...
Click to collapse

How
How do I roote the phone. I am rather good with computers and have rooted an old Sony Ericsson x1 for many years ago but then I had an easy guide, any guide about how I root Vsun?
Hans
Yepoke said:
Dear Guys:
When you have a vsun i9 like me, root him and copy the google play app into the system map and install it from there with root explorer and everything works fine, because that app need all rights. Good luck. :good:
Click to expand...
Click to collapse

Rooting with SRSroot setup
barbarhaj said:
How do I roote the phone. I am rather good with computers and have rooted an old Sony Ericsson x1 for many years ago but then I had an easy guide, any guide about how I root Vsun?
Hans
Click to expand...
Click to collapse
Hoi Hans:
Try it with SRSroot setup (google the program) install and let the program do the work for you
You will need internet on the pc that root the phone but it works.

And now google playstore
- Step 1: Uninstall google playstore.apk
- Step 2: Enable 'USB debugging' on your device (you can find this in the settings menu)
- Step 3: Enable 'Unknown Sources' on your device (Also under settings)
- Step 4: Connect your device to the computer (If needed install the android drivers)
- Step 5: Click on one of the ROOT options in this software (you can choose between supersu or superuser), and wait till it's finished.
- Step 6: Download root explorer.apk and install it on your device.
- Step 7: Download google playstore.apk and copy this file into the system/app/ map of your phone with root explorer.
When it's not allowed to past the file look at the top of the screen and change the properties of root explorer to read and write (mount r/w to mount r/o).
- Step 8: Change now the permissions of that app to
Owner = read write
Group = read
Others = read
- Step 9: Then install the playstore.apk from this place en restart your phone when done.
- Step 10: Now you have a full working playstore app on your mobile

[Tool][Mac] Google Installer and Amazon Killer

About:
Scripts and packages to install Google services, aid in KingRoot, and disable Amazon services written for Apple OS X.
Requirements:
OS X, device wifi connected, debugging enabled, host RSA key accepted.
Notice:
This project is sleeping. Feel free to modify and redistribute. However, be warned that tampering with the scripts may cause unintended damage to your device.
Link:
Download v0.33
Usage:
Download and extract .zip file.
Run Terminal, cd into extracted GIaAK folder, then "sh install.sh".
Contributors:
kanderson88 - inspiration, collaboration
sd_shadow - insights
KingRoot - root

I am glad there are some happy Mac users here, I have made a bunch of neat scripts but never uploaded them. Good work.

Gonna give it a go, wish me luck! lol

#to re-enable Amazon Web view. Google web view doesn't currently step in and take over, probably needs permission to.
./adb shell
su
pm enable com.amazon.webview
pm uninstall com.Google.Android.webview
#affects things like Spotify Facebook login function, etc.

Can't download the file, keeps giving a 403 error (tried chrome and firefox) ... may want to upload to somewhere else like rghost.net or something
"NetworkError: 403 Forbidden - https://app.box.com/index.php?rm=box_download_shared_file&shared_name=6qwfdy900fydyf64lst9zi0uudcsvsg0&file_id=f_53278030645"

TripFlex said:
Can't download the file, keeps giving a 403 error (tried chrome and firefox) ... may want to upload to somewhere else like rghost.net or something
"NetworkError: 403 Forbidden - https://app.box.com/index.php?rm=box_download_shared_file&shared_name=6qwfdy900fydyf64lst9zi0uudcsvsg0&file_id=f_53278030645"
Click to expand...
Click to collapse
I had no issues downloading today. Using it soon.

Does this exist for windows? How about a similar tool?

can any one post command for manual install in windows ?

-waiting for device-
I am getting this message...
"error: device '(null)' not found
- waiting for device -"
I have the Fire HD 8 plugged into my Macbook via USB using MTP. What am I missing?
Thanks.

watson007 said:
I am getting this message...
"error: device '(null)' not found
- waiting for device -"
I have the Fire HD 8 plugged into my Macbook via USB using MTP. What am I missing?
Thanks.
Click to expand...
Click to collapse
On tablet Go into settings > device options > developer options > enable ADB.
If you don't see developer options then settings > device options > tap on build number 7 times > then tap developer options > enable ADB. You will get a pop up on your tablet asking for permission. check the box and say yes.

For Windows
Wouldn't work in windows obviously.. so I edited the install.sh so it would work. You have to use a program like cygwin.
Just delete all ./ before all adb commands.

leejuspsa said:
Wouldn't work in windows obviously.. so I edited the install.sh so it would work. You have to use a program like cygwin.
Just delete all ./ before all adb commands.
Click to expand...
Click to collapse
What version of FireOS are you on?

DragonFire1024 said:
What version of FireOS are you on?
Click to expand...
Click to collapse
I'm on 5.4.0.1 now but I think I ran it on an earlier version. I just bought it from staples in store so it probably was not by much.

leejuspsa said:
I'm on 5.4.0.1 now but I think I ran it on an earlier version. I just bought it from staples in store so it probably was not by much.
Click to expand...
Click to collapse
Did you do this before or after 5.4.0.1? We are trying to determine if uninstalling/disabling the apps is still possible on 5.4.0.1.
EDIT: Just noticed you said earlier version.

Does anyone know if this will work with the new 2017 edition?

pastorbennett said:
Does anyone know if this will work with the new 2017 edition?
Click to expand...
Click to collapse
did you end up trying it?

Can anyone modify it for linux or windows? As not everyone has a mac.

dadoc04 said:
did you end up trying it?
Click to expand...
Click to collapse
Sort of. It won't work, because Kingroot isn't yet compatible with the 2017 Fire HDs.

[FireTVStick4k] Updated Info November 2019

Hi everyone, it's been a long time! I used to be into this stuff back when I got my original Fire TV Gen 1 Box and rooted it etc. I still have been rocking it but it's slow and like half rooted ( unlocked but not root). Got a great deal on a FireTv4k stick on amazon for $25
Rumor has it that Black Friday will have this price as well and we can expect a LARGE influx of new firetv users posting. the same questions I had about the state of Rooting, KODI, Custom Launchers etc. This information is by NO MEANS exhaustive, and is just what I gathered in the last few hours of research and getting things up and running.
*Do I need to Jailbreak/Root my new fire tv?*
Honestly, probably not. Jailbreaking, or rooting as. we call in android world is really not AS useful as many think. It allows for much deeper customization however for what most people are looking for ie. KODI/Sideloading APK's a root/jailbreak _IS NOT REQUIRED_. This link will explain how to turn on developer tools and 3rd party apps. and how you can load KODI on to your fire tv without rooting.
https://www.tomsguide.com/us/how-to-install-kodi-fire-tv,news-25115.html
*2. Can I Root My Fire TV*
If you still want to root/jailbreak, for whatever reason. Some devices can and some devices cant be rooted. The firetv4k stick can be rooted. However it's not for the faint of heart and required removing the casing, shorting out some leads on the electrical board and having a linux machine handy. Not really worth it in my opinion.
3. Can I put custom launchers on my fire tv so I don't need to look at all the ads on the amazon home screen.
YES you can! the method that worked for me today ( 11/20/2019) was using Lean Back Launcher Instructions found in the first post here.
https://forum.xda-developers.com/fire-tv/development/app-leanback-launcher-fire-tv-t3750451
BUT on page 18 user @tsynik was kind to update a long dead project for 4k fire tv's at this link https://github.com/tsynik/LeanbackLauncher
the finally piece of the puzzle is to get it so that when you press the HOME button on your remote, it goes to this new , less cluttered launcher. To do that we need LauncherHijack. Also another app that seem's to have not been updated in a while. Thankfully I came across a post on git hub with instructions to get it working https://github.com/BaronKiko/LauncherHijack/issues/52#issuecomment-504738320
I personally ended up not even using Leanback Launcher in the long run. Instead I used the LauncherHijack and set it to KODI.....that way every time I press home I get put back to kodi. I then used the theme AMBER to create a custom menu in kodi that links out to the official NETFLIX/HBO GO,YOUTUBE apps.
I hope this helps a few of the newbies coming in here. Feel free to ask questions and I'll try my best to answer. But be warned im not super technical.

Thanks!

The whole bit about the launchers is outdated for the 4k stick at least. That method now results in a voice overlay on almost all streaming apps. No fix has been found yet.

JUSTINMARMER said:
The whole bit about the launchers is outdated for the 4k stick at least. That method now results in a voice overlay on almost all streaming apps. No fix has been found yet.
Click to expand...
Click to collapse
really? Can you give me an example of an app that does that? I haven't run into this error yet using KODI,Youtube APK, Netflix APK, and HBO GO Apk.
Are you sure you are using the updated leanback launcher for fire tv 4K that I linked to?

Sure, if you go back to the thread that's all about that LauncherHijack
https://forum.xda-developers.com/fire-tv/general/launcher-root-launcher-hijack-v4-t3877467
You'll see a bunch of us crying about it.

JUSTINMARMER said:
Sure, if you go back to the thread that's all about that LauncherHijack
https://forum.xda-developers.com/fire-tv/general/launcher-root-launcher-hijack-v4-t3877467
You'll see a bunch of us crying about it.
Click to expand...
Click to collapse
That's interesting. I have not had this issue. I seem to maybe used launcher hijack V 3? along wit hate git hub REPACK and Settings File.......can you try that and tell me if you get the same results?
I have attached the two files I use. Install Hijack, Then Install Debug, Launch Debug First, Then Launch Hijack

Dxfan227 said:
That's interesting. I have not had this issue. I seem to maybe used launcher hijack V 3? along wit hate git hub REPACK and Settings File.......can you try that and tell me if you get the same results?
I have attached the two files I use. Install Hijack, Then Install Debug, Launch Debug First, Then Launch Hijack
Click to expand...
Click to collapse
Do I need to run any ADB commands?

Dxfan227 said:
really? Can you give me an example of an app that does that? I haven't run into this error yet using KODI,Youtube APK, Netflix APK, and HBO GO Apk.
Are you sure you are using the updated leanback launcher for fire tv 4K that I linked to?
Click to expand...
Click to collapse
Can you confirm you have done this on the latest 4K firestick ? The one that has the ADB Shell as "mantis"
When the follow the process:
1. Install debugfile (settingstest apk)
2. Install launcherhijack
3. Run adb command - adb shell pm grant com.example.settest.settingstest android.permission.WRITE_SECURE_SETTINGS
4. Start the settingstest app, which automatically starts hijackthis.
All works great, except when i open Youtube / Netflix , i get the voice view / narrator telling me whats on the screen !
Please let me know

JUSTINMARMER said:
Do I need to run any ADB commands?
Click to expand...
Click to collapse
3. Run adb command - adb shell pm grant com.example.settest.settingstest android.permission.WRITE_SECURE_SETTINGS

Intenti0n said:
Can you confirm you have done this on the latest 4K firestick ? The one that has the ADB Shell as "mantis"
When the follow the process:
1. Install debugfile (settingstest apk)
2. Install launcherhijack
3. Run adb command - adb shell pm grant com.example.settest.settingstest android.permission.WRITE_SECURE_SETTINGS
4. Start the settingstest app, which automatically starts hijackthis.
All works great, except when i open Youtube / Netflix , i get the voice view / narrator telling me whats on the screen !
Please let me know
Click to expand...
Click to collapse
That's interesting you're the second individual in this thread with this issue.
The firestick 4k was ordered from amazon directly just last week. I assume it's "mantis". I have been using YouTube and have no overlay voice. Just regular app experience.

JUSTINMARMER said:
The whole bit about the launchers is outdated for the 4k stick at least. That method now results in a voice overlay on almost all streaming apps. No fix has been found yet.
Click to expand...
Click to collapse
Hey man,
after suffering with the voiceview issues for weeks, i've finally managed to fix it !
All, I did was a factory reset of my 4K firestick and the repeated the install steps:
1. Install debugfile (settingstest apk)
2. Install launcherhijack
3. Run adb command - adb shell pm grant com.example.settest.settingstest android.permission.WRITE_SECURE_SETTINGS
4. Start the settingstest app, which automatically starts hijackthis.
and i have no more narrator nonsense !

Intenti0n said:
Hey man,
after suffering with the voiceview issues for weeks, i've finally managed to fix it !
All, I did was a factory reset of my 4K firestick and the repeated the install steps:
1. Install debugfile (settingstest apk)
2. Install launcherhijack
3. Run adb command - adb shell pm grant com.example.settest.settingstest android.permission.WRITE_SECURE_SETTINGS
4. Start the settingstest app, which automatically starts hijackthis.
and i have no more narrator nonsense !
Click to expand...
Click to collapse
I'm glad I could help ( What little I did LOL). Hopefully others will find this thread useful who had the same voice over issues as well as new fire TV 4k members coming from the BlackFriday Deals.
One other thing I did, and I'm not sure if it even does anything, is restrict amazon updates at the router level. It's pretty unreliable obviously but I figured it couldn't really hurt to do this.

Intenti0n said:
Hey man,
after suffering with the voiceview issues for weeks, i've finally managed to fix it !
All, I did was a factory reset of my 4K firestick and the repeated the install steps:
1. Install debugfile (settingstest apk)
2. Install launcherhijack
3. Run adb command - adb shell pm grant com.example.settest.settingstest android.permission.WRITE_SECURE_SETTINGS
4. Start the settingstest app, which automatically starts hijackthis.
and i have no more narrator nonsense !
Click to expand...
Click to collapse
I haven't factory reset yet, but I will try when I get off work and report back. Thank you for your help.

JUSTINMARMER said:
I haven't factory reset yet, but I will try when I get off work and report back. Thank you for your help.
Click to expand...
Click to collapse
there were some comments that you should uninstall the old version of LauncherHijack before the using the new one I linked. Maybe try that first before the full factory reset.

Intenti0n said:
Hey man,
after suffering with the voiceview issues for weeks, i've finally managed to fix it !
All, I did was a factory reset of my 4K firestick and the repeated the install steps:
1. Install debugfile (settingstest apk)
2. Install launcherhijack
3. Run adb command - adb shell pm grant com.example.settest.settingstest android.permission.WRITE_SECURE_SETTINGS
4. Start the settingstest app, which automatically starts hijackthis.
and i have no more narrator nonsense !
Click to expand...
Click to collapse
Dxfan227 said:
there were some comments that you should uninstall the old version of LauncherHijack before the using the new one I linked. Maybe try that first before the full factory reset.
Click to expand...
Click to collapse
Factory reset and using the files you provided in this thread worked. Thanks for your help.

So I stumbled upon a guide from way back of 2016, and was wondering if it's possible to connect an NTFS external HDD to the FireTV 4k stick. The guide in question concerned a Fire TV and used a side-loaded "Paragon NTFS & HFS+" app to mount the hard drive and Kodi to access it.
Has anybody have had experience with that? Could that be possible if a powered USB hub was used?

Update: Although the voice view nonsense is fixed, one problem remains.... The built in cursor for Silk Browser has disappeared. I'm having to use an air mouse or mouse toggle. Did two more factory resets and once the ADB command is entered this problem returns.

JUSTINMARMER said:
Update: Although the voice view nonsense is fixed, one problem remains.... The built in cursor for Silk Browser has disappeared. I'm having to use an air mouse or mouse toggle. Did two more factory resets and once the ADB command is entered this problem returns.
Click to expand...
Click to collapse
Yes, I'm having the same issue with the cursor in Silk – I'm currently looking at the source of LauncherHijack to find out if we can do something about that. Meanwhile you can use Firefox; there the cursor is still working...

TheRealQubix said:
Yes, I'm having the same issue with the cursor in Silk – I'm currently looking at the source of LauncherHijack to find out if we can do something about that. Meanwhile you can use Firefox; there the cursor is still working...
Click to expand...
Click to collapse
Yes, but video controls in Firefox are atrocious. Please keep us informed if you make any progress with the cursor fix.

JUSTINMARMER said:
Yes, but video controls in Firefox are atrocious. Please keep us informed if you make any progress with the cursor fix.
Click to expand...
Click to collapse
Yeah, I know But better than no cursor at all... I just got a wireless mini keyboard with touchpad which helps by providing a "real" mouse cursor in Silk but I'd really like to be able to use the standard remote... will keep this thread updated if I find a solution.
Btw, I've combined the functionality of the settingstest/debug apk into LauncherHijack so let me know if anybody needs this; then only LauncherHijack plus 1 adb command is required... (can I add files here?).