I am currently on the aokp rom and i need to sell the phone and wipe everything on the phone. I cant seem to find a guide that does this perfectly. Ideally I would like to return to 100% stock as if the phone is brand new out of the box.
Any suggestions?
Flash one of these http://forum.xda-developers.com/showthread.php?p=33570269 and you should be good.
Sent from my SAMSUNG-SGH-I747
Perfect thanks, downloading now.
brfitzp said:
I am currently on the aokp rom and i need to sell the phone and wipe everything on the phone. I cant seem to find a guide that does this perfectly. Ideally I would like to return to 100% stock as if the phone is brand new out of the box.
Any suggestions?
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=1746665 and follow the instructions - watch the video from wwjoshdew and it's super easy. Get a stock rom from here http://forum.xda-developers.com/showthread.php?t=1739426 - this thread also provides instructions on how to revert back to stock.
You could always sell the phone the way it is - the aokp rom is a definite feature..
GladdBag said:
Go here http://forum.xda-developers.com/showthread.php?t=1746665 and follow the instructions - watch the video from wwjoshdew and it's super easy. Get a stock rom from here http://forum.xda-developers.com/showthread.php?t=1739426 - this thread also provides instructions on how to revert back to stock.
You could always sell the phone the way it is - the aokp rom is a definite feature..
Click to expand...
Click to collapse
Yea but i think the average person is going to be like wtf is this. Most people don't know about custom roms and phones. (at least i dont think they do)
So i flashed the stock firmware and it keeps hanging at the samsung boot screen it does the att boot animation then gets stuck at the samsung one.
I put the md5 fild in the pda box on odin. thats correct right?
I'm trying to download the file from another mirror maybe i got a corrupt download.
brfitzp said:
So i flashed the stock firmware and it keeps hanging at the samsung boot screen it does the att boot animation then gets stuck at the samsung one.
I put the md5 fild in the pda box on odin. thats correct right?
I'm trying to download the file from another mirror maybe i got a corrupt download.
Click to expand...
Click to collapse
No, just pull the battery and reboot into recovery. Do a wipe data/factory reset then reboot and you should be good to go.
GladdBag said:
No, just pull the battery and reboot into recovery. Do a wipe data/factory reset then reboot and you should be good to go.
Click to expand...
Click to collapse
Ok great it worked, thanks.
Anytime.
Sent from my SGH-I747 using XDA Premium HD app
Since the thread is here. If I used the root method to not trip flash counter. How do I return to stock without tripping the counter? Kies?
Sent from my at&t Galaxy S III using xda premium
kleeman7 said:
Since the thread is here. If I used the root method to not trip flash counter. How do I return to stock without tripping the counter? Kies?
Sent from my at&t Galaxy S III using xda premium
Click to expand...
Click to collapse
Use Odin to flash the stock ROM mentioned above. That process won't trip it.
jackryan57 said:
Use Odin to flash the stock ROM mentioned above. That process won't trip it.
Click to expand...
Click to collapse
Or use TriangleAway.
Delete Please soory wrong thread
Related
i need to unroot my s3 for warranty purposes but i cannot find proper procedures for the the model sgh-t999v..
i have 2 questions,
1. can i just root a stock rom for sgh-t999 to my sgh-t999v?
2. anyone have the procedures to unroot my sgh-t999v
thanks
Flash a stock rooted Rom. T-Mobile one. That seems to be ok as long as you don't flash a T-Mobile radio.
Not sure if triangle away works on the Canadian version.
Maybe someone else has tried it.
All I had to do to return my last one was flash a stock rooted Rom.
I don't think they check the flash counter
Sent from my SGH-T999 using xda premium
---------- Post added at 08:52 AM ---------- Previous post was at 08:48 AM ----------
If the Rom has some T-Mobile bloat left on it get it off there.
Hide superuser in a folder
Sent from my SGH-T999 using xda premium
Thanks, ill try it tonight
Sent from my SGH-T999V using xda app-developers app
Or you can download the actual fw for your device. You will have to register but its no big deal.
Www.sammobile.com/firmware
11 Years Ago Today...
WE WILL NEVER FORGET!!!
GOD BLESS AMERICA!!!
I can see you have a Videotron Galaxy S3. They don't check the flash counter. Let's just say I know this "by experience". As long as it's just rooted and you don't have any custom ROM, you should be fine. But indeed if you can at least hide the SU app it would be a good thing.
You could also perform a factory reset in CWM prior to going to the store, as they will make you do it anyways (and you actually don't want them to see the CWM screen)prior to any exchange. It's company policy.
lightpsycho said:
I can see you have a Videotron Galaxy S3. They don't check the flash counter. Let's just say I know this "by experience". As long as it's just rooted and you don't have any custom ROM, you should be fine. But indeed if you can at least hide the SU app it would be a good thing.
You could also perform a factory reset in CWM prior to going to the store, as they will make you do it anyways (and you actually don't want them to see the CWM screen)prior to any exchange. It's company policy.
Click to expand...
Click to collapse
It's still probably safer to just use Triangle Away to get rid of the flash counter
Triangle away? Please explain
Sent from my SGH-T999V using xda app-developers app
yukuansu said:
Triangle away? Please explain
Sent from my SGH-T999V using xda app-developers app
Click to expand...
Click to collapse
Heres everything to know about triangle away, it resets the flash counter...
http://forum.xda-developers.com/showthread.php?t=1494114
Jake
T-Mobile & SGH-T999V
Hi,
Can we use the T-Mobile stock recovery on SGH-T999V?
flyerspat said:
Hi,
Can we use the T-Mobile stock recovery on SGH-T999V?
Click to expand...
Click to collapse
If your trying to go back to stock, just download the stock rom from sammobile, it has everything you need like stock recovery, and then just flash it via odin.
htc fan89 said:
If your trying to go back to stock, just download the stock rom from sammobile, it has everything you need like stock recovery, and then just flash it via odin.
Click to expand...
Click to collapse
Hi,
The only downloads availables are the firmwares, does it include the stock recovery in it?
flyerspat said:
Hi,
The only downloads availables are the firmwares, does it include the stock recovery in it?
Click to expand...
Click to collapse
Yes it should be the full fw which includes radio, recovery and more.
Sent from my SGH-T999 using xda app-developers app
Thanks!
I'll test it tonight, wouldn't look good to download a 700 mb file at work!
I tried a few firmwares, but for some reason they all said "unsupport dev_type" when trying to use odin to return to stock non root (from stock rooted) In the end, the easiest way to remove root was to just let Kies update my gs3 to Jelly Bean (sgh-t999v). Painless, no data loss, took about 30 minutes with the firmware download.
Good luck
You will likely also want to triangle away. I won't link because it's extremely dangerous software that requires you to read up on the risks.
But that will reset your custom flashes assuming you have some on your counter you can check easily by going into download mode.
i recently lost my stock rom backup.. deleted it off clockworkmod touch by accident, so i only have the cm10.1 nightly i was running when i deleted it.. now i'm assuming i will lose root if i flash the stock firmware through odin? is there another way to get my stock rom back without losing root (and cyanogenmod rom backups)?
hey guys im having trouble with triangle away on my sgh-t999v with the baseband version: T999VVLUFNF1
after I used triangle away and I go into download mode it says:
current binary: Samsung Official
System status: official
qualcomm secureboot:enable
Warranty Bit:1
Bootloader AP SWAEV: 2
Although the current binary and the system status have changed the warranty bit is still at 1
Please help!
There is no way (and never will be a way) to change the Warranty Bit. Sorry
DocHoliday77 said:
There is no way (and never will be a way) to change the Warranty Bit. Sorry
Click to expand...
Click to collapse
I guess im screwed for warranty..I thought it might be cuz I have a custom kernal installed that triangle away didnt work..but thanks anyway and sorry about posting in multiple threads, im kinda new to this
No problem, thats why i mention it, so you know for the future.
Tecnically, with the warranty bit tripped, the warranty is void. However, i have seen a lot of posts where people sent it in anyway and their warranty was still honored. Its not a guarantee, but there is hope it can be used if needed. The good thing though, is you most likely will never need to use it anyway!
Hi Guys need help bad. I hope I didnt screw my phone up.
I rooted my phone using the latest toolkit and installed twrp. Once i did that I backed up everything including efs on the external card.
Once i did that I flashed Jedi x rom but did not have much signal so decided to flash another rom which was liquid smooth. Once I flashed it again
my signal was almost non existent. I downloaded a canadian modem in the zip file and flashed it using twrp the same way i would flash a rom.
After i did that i wiped all the data and cache and the system. As I was rushing it siince its late at night i got a message saying that I am not rooted. I ignored it and rebooted the system and now its stuck on samsung logo. What can i do? Please help!!!!!
It appears that when I hold vol up plus home plus power I can get into download mode. I hope that helps.
Can someone give me some help how to get it back to life. I am pretty sure I have to use Odin at this point but dont know how
Ok i did some reading and I think the next step is to download stock image for the wind mobile turn on Odin and upload the image to the phone..
What settings should I use in Odin? What should be checked at the top and am I to use PDA only?
You can use odin or just reflash the ROM. You said tout wiped system after flashing the modern. That means you erased what ever ROM was on there. It's sticking at Samsung because there is no ROM to boot into.
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
You can use odin or just reflash the ROM. You said tout wiped system after flashing the modern. That means you erased what ever ROM was on there. It's sticking at Samsung because there is no ROM to boot into.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Well I cant get into TWRP and dont know how to flash a ROM through ODIN? I am total newb at this.
Could you give me some pointers once I open up odin what do i need to do ? Thanks
Have you puked the battery. Put it back in then held volume+, home and power? Your recovery should still be there.
Also, odin is easy. Just open it and click the pda box and put your stock ROM there. Two things make sure you put your image in PDA and PDA ONLY and make sure it's your official stock Image
Sent from my SGH-T889 using xda app-developers app
kintwofan said:
Have you puked the battery. Put it back in then held volume+, home and power? Your recovery should still be there.
Also, odin is easy. Just open it and click the pda box and put your stock ROM there. Two things make sure you put your image in PDA and PDA ONLY and make sure it's your official stock Image
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Yup went back to ODIN and flashed stock image and everything is now working great. I assume that I need to root the phone again before attempting to flash any roms again. I guess it was late at night and like you said I wiped the rom and there was nothing to boot into. I am an idiot!
Thanks for your quick help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
vseslija said:
Yup went back to ODIN and flashed stock image and everything is now working great. I assume that I need to root the phone again before attempting to flash any roms again. I guess it was late at night and like you said I wiped the rom and there was nothing to boot into. I am an idiot!
Thanks for your quick help !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Next time odin this http://forum.xda-developers.com/showthread.php?t=1975560 pre-rooted doesn't trip the counter,,,
deeznutz1977 said:
Next time odin this http://forum.xda-developers.com/showthread.php?t=1975560 pre-rooted doesn't trip the counter,,,
Click to expand...
Click to collapse
Ok so here's my next question.
In order to root again do i use the toolkit again or simply just download the pre-rooted rom and flash it with Odin? Which one would be better just
to get root again? Thanks!
vseslija said:
Ok so here's my next question.
In order to root again do i use the toolkit again or simply just download the pre-rooted rom and flash it with Odin? Which one would be better just
to get root again? Thanks!
Click to expand...
Click to collapse
Download the rom from the link i posted..flash in Odin Thats it pre rooted
deeznutz1977 said:
Download the rom from the link i posted..flash in Odin Thats it pre rooted
Click to expand...
Click to collapse
When I did this approach, I did it in two steps. I downloaded factory image of the firmware and flashed the device by using Odin 3.0.7.
Next, I used a tool package called "Galaxy Note2 ToolKit." Follow the instructions for how to root.
When I did the procedure, the software also had an option to include clockworkmod recovery
and busybox.
Gideon.
I may have lied about the girls, but here is my problem. I was on CM 10.1 Nightly 4/17 or something. I tried flashed Ktoonssez kernal....and it bricked my phone. I managed to get download mode but I am not sure what to do. Finals are coming up, and I have some lecture recording so if there is anyway to get everything back. If not I still want to stay on CM 10.1 I cannot enter recovery but before I flashed I made a nandoid back up in TWRP. IF anyone can help me ASAP I would really appreciate it!!!!
Came for the girls, disappointed.
Flash a stock ROM via odin, factory reset from recovery, flash TWRP, restore backup.
PS it's kernEl
Glebun said:
Came for the girls, disappointed.
Flash a stock ROM via odin, factory reset from recovery, flash TWRP, restore backup.
PS it's kernEl
Click to expand...
Click to collapse
Sorry! and thanks. Stock as in Touchwiz stock right?
Xaphino said:
Sorry! and thanks. Stock as in Touchwiz stock right?
Click to expand...
Click to collapse
Download one from sammobile and flash it via odin and yeah you get stock touchwiz nature ux
Sent from my GT-I9300 using xda app-developers app
KayKrate said:
Download one from sammobile and flash it via odin and yeah you get stock touchwiz nature ux
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Okay I think I scerwed it up even more.
I did the odin think, but now it doesn't even boot. It doesn't charge either, all it does is vibate whenever I try to boot it up. I cant get into Recoevery or Download. I think I hard bricked it, Will I need a Jig?
Xaphino said:
Okay I think I scerwed it up even more.
I did the odin think, but now it doesn't even boot. It doesn't charge either, all it does is vibate whenever I try to boot it up. I cant get into Recoevery or Download. I think I hard bricked it, Will I need a Jig?
Click to expand...
Click to collapse
Did odin say "PASS" ?
KayKrate said:
Did odin say "PASS" ?
Click to expand...
Click to collapse
Yes it did, and then I followed up with CF root. which I think is what messed up because it didnt fail or pass. It just said complete. Will a Jig fix it? It stills vibrates but thats about it.
Xaphino said:
Yes it did, and then I followed up with CF root. which I think is what messed up because it didnt fail or pass. It just said complete.
Click to expand...
Click to collapse
First of all , are you sure your device is i9300 and you flashed the right file for your device ? or you rooted using CF-Auto Root (Not CF-Root, i heard it doesnt have the Sudden Death fix)
KayKrate said:
First of all , are you sure your device is i9300 and you flashed the right file for your device ? or you rooted using CF-Auto Root (Not CF-Root) i heard it doesnt have the Sudden Death fix
Click to expand...
Click to collapse
Do not think Im i9300. I have a U.S. Tmobile S3 phone (Sgh-T999?)
Defintely used the CF Auto Root, And both of the files say it for Sch-T999
Files I used
CF-Auto-Root-d2tmo-d2tmo-sght999
Samsung-Updates.com-SGH-T999-TMB-T999UVDLJC-1358425905
Xaphino said:
Do not think Im i9300. I have a U.S. Tmobile S3 phone (Sgh-T999?)
Defintely used the CF Auto Root, And both of the files say it for Sch-T999
Files I used
CF-Auto-Root-d2tmo-d2tmo-sght999
Samsung-Updates.com-SGH-T999-TMB-T999UVDLJC-1358425905
Click to expand...
Click to collapse
You probably need a JIG , not sure what you did there but a JIG should get it into download mode
Xaphino said:
Do not think Im i9300. I have a U.S. Tmobile S3 phone (Sgh-T999?)
Defintely used the CF Auto Root, And both of the files say it for Sch-T999
Files I used
CF-Auto-Root-d2tmo-d2tmo-sght999
Samsung-Updates.com-SGH-T999-TMB-T999UVDLJC-1358425905
Click to expand...
Click to collapse
I realized what I did wrong, I flashed a different file, and for some reason I managed to get back on Download mode! Hopefully I get it right now
Xaphino said:
I realized what I did wrong, I flashed a different file, and for some reason I managed to get back on Download mode! Hopefully I get it right now
Click to expand...
Click to collapse
Now take care and dont hard brick it
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Is it supposed to use T999 firmware?
Only odin flash T999L firmware. I dont see it released yet at samsing-updates.com though.
Maybe samfirmware.com? I can look later.
Sent from my SGH-T999 using xda premium
re: sure fix
newidforu said:
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Click to expand...
Click to collapse
Why not reflash the stock ODIN flash rom and make sure it all works ok for you, that will tell you exactly what the problem is.
If the stock rom is working properly, then there is only one thing left which is the culprit and that is the CM10/AOKP/AOSP
or PORTED roms which many people seem to like flashing.
The CM10/AOKP/AOSP and ported roms are excellent if you are a developer or if you like to do a lot of experimentation with your phone.
So the thing to do now is reboot your phone to recovery mode, do a "Factory Reset", "Wipe Cache", "Wipe System" and "Wipe Dalvik".
When that's done Open Odin and put the stock rooted T999 Tmobile Jellybean 4.1.2 into Odin's PDA slot, go into download mode
and once you see Odin is connected to the phone start the flash. Have patience for the phone to boot after its done flashing.
Here is the stock rooted Odin flash T999 Tmobile Jellybean 4.1.2 rom that you can download if you like: T999_UVDMD5
Official JB Firmware - Latest JB 4.1.2 Firmware
My suggestion to you is to only flash Samsung T999 Tmobile stock based Jellybean 4.1.1 or 4.1.2 roms in the future.
But who am I to say whats best..... This is just my personal opinion...... Which usually is not worth a dime. LOL
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am a newbie. I thought the T999 was the same as the T999L. That would explain why Odin doesnt flash stock T999 onto my device. Can anyone here post a link to the stock SGH-T999L ROM?
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
newidforu said:
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
Click to expand...
Click to collapse
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
DocHoliday77 said:
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I used Odin to flash Clockwork Mod recovery first. I did not like Clockwork Mod's interface and reflashed with TWRP. I had no problems to gain root with either of these methods. I also tried Cyanogenmod stable 10.0.0 and then 10.1 RC2 without any problems. As far as I can tell, all apps work except for the camera. One word of caution though. As you can see from my posts, I am new and dont know what I am doing. I might have just gotten lucky since my device is still unbricked. I had only one "scary" moment during the entire process. I used TWRP to wipe my phone clean and was stuck with no OS install file. ADB sideload did not work since it could not recognize the device at that point. Luckily, I had a micro SD card lying around and was able to put in a new OS install file using my laptop and then TWRP was able to handle it.
tsticge aye
faytx1 said:
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Click to expand...
Click to collapse
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
newidforu said:
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
Click to expand...
Click to collapse
Here is the cameradata folder from the T999L.
http://d-h.st/Ciy
Good Luck!
How did you get Cyanogenmod installed on the t999l every time i try it aborts with status 7
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Beefstew said:
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You reverted to stock on the T999L? please exspain how that was done
Re flashed stock ROM using Odin. I believe I got the file from Samsung's website, but I'm not positive of that. I do know its huge, over 1 gig. If you need help with the re flash I know there are already how to's on here about that, so I won't go into it here.
Sent from my SGH-T999 using xda app-developers app
You must be using a T999 as your sig indicates, not a T999L. Am I correct?
Sent from my SGH-T999 using xda premium
Don't I feel like a tool now. Yes Doc, plain old t999 here. Now that I read back through the whole thread here I see that I was being a bit redundant. Now I will return to my closet under the stairs.
Sent from my SGH-T999 using xda app-developers app
No worries! We all do stuff like that from time to time!
Sent from my SGH-T999 using xda premium
Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
emeres said:
Hi as always I come for the expert advice to you guys. I have recently UPDATED my Galaxy S4 for Tmobile to CyanogenMod. Frankly I love the speed but it is still in beta version and has a few things I did not like. Few glitches. Anyway:
I want to go back to my stock firmware which was Kit Kat 4.2.2.before I installed Cyanogenmod.
I already downloaded Odin V3 09 and am ready to do this but I still do not have the stock firmware file. I looked for it but I really don't want to screw it up.
Can someone be so kind and insert the link to the download ? And if of course possible STEP BY STEP instructions on HOW TO GO BACK ?
I understand my phone now is rooted and will stay rooted after reinstalling Kit Kat. So I still should be able to get rid of all the bloatware correct ?
Any help greatly appreciated and huge THANKS IN ADVANCE !!!
Click to expand...
Click to collapse
Finding the stock firmware won't be easy unless you try downloading from sammoble, but you could try Fenny's stock rooted 4.4.2 rom in development.
It's very smooth without the bloatware and it has unlimited tethering.
It works best with Philz recovery.
Just follow the directions and your good to go.
Don't forget to do a factory reset.
Pp.
Sent from my Touchwiz device that never forgets apps.
PIN lock screen does NOT work on Fenny's rom when you first boot/restart/power up the phone. So, if you are turning your phone on the lock screen will just be skipped over.
Pin lock issue could be NG if you need that type of security.
Pp.
Sent from my Touchwiz device that never forgets apps.
serio22 said:
Download firmware here http://www.cheatersedge.org/android/m919/M919UVUFNB4_M919TMBFNB4_TMB_FENNY_FIXED.zip, there is a thread already on instructions on how to flash.. and just because you rooted doesn't mean your device will stay rooted forever. Once you flash the firmware you will be unrooted but you can root again.. Alternatively you can just flash a debloated stock rom in recovery
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
emeres said:
Thank you so much Serio22, I just want to make sure it is the correct one for my Tmobile GS4.
And also would you be so kind and attach the STEP BY STEP instructions for Odin ? I am really afraid of bricking my phone. I need guidance.
People say once you do it few times it becomes easy as pie. But like I wrote above I don't want to mess up my phone.
Click to expand...
Click to collapse
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
serio22 said:
There's instructions here, is for MDL but it's the exact same way for NB4 http://forum.xda-developers.com/showthread.php?t=2258628
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
emeres said:
One last question and I won't bother again:
When it comes to those files " OFFICIAL TAR AND ORIGINAL TAR " do I just choose any one of them ?? I wanted to know the difference between them both. Instructions don't really specify which to choose. Or is it both ?
And also there is a suggestion to " Wipe the data in recovery " after the whole thing how do I do that ? Should I do that ?
Thank you again for your help.
Click to expand...
Click to collapse
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Thank you so much again, you were more than helpful :laugh:
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
emeres said:
Sorry one more thing:
In the instructions Auto Reboot is checked. I have watched a few videos with the F. Reset Time also checked, should I check both in Odin ?
Click to expand...
Click to collapse
I don't think any of them are necessary, but you can check both of them if you want.. I always have F.Reset checked and reboot disabled because I like to reboot on my own but that's just me
Sent from my SGH-M919 using Tapatalk
serio22 said:
You don't have to worry about that, just use the tar file I posted earlier
Edit: and for the wipe data, you reboot to recovery after you flashed the firmware and do a factory reset.. Yes you should, but not necessary if you don't have any issues..
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
emeres said:
So I am back to stock it took me back to KitKat and now I am unrooted. I did not do the factory reset with Cyanogen so when I flashed the stock ROM I still had the cyanogen wallpaper. Some apps did not work so I did the factory reset and everything is flawless now.
Thank you for your help and the file you have provided. By the way was that the Jellybean of KitKat stock firmware ?
Click to expand...
Click to collapse
KitKat
Sent from my SGH-M919 using Tapatalk