after i brick my phone.
ill try to unbrick it using .kdz.
i always do this but today.
my phone stocks in bootimage.
how can i fix this error?
Already fiX by trying to hard reset
Related
Hello All,
I made a horrible discovery as I went to set my alarm last night that my G3 has managed to hard brick itself. It wasn't rooted but had a few emulators and stuff on it and at some point it has ruined the phone
It has the dreaded QHSUSB_BULK whenever I try to flash it or use the LG Mobile Support tool after say 2-4%.
I'm hoping (praying) that some kind G3 owner (D855 16GB UK Model) could upload or send me a debrick.img for the SD?
If not I'll have to try and claim the warranty with LG as my return window has passed with amazon unfortunately.
First android and a month later a hard brick lol :/
Thank you!
(I know it's almost certain I'll have to send it away)
Are you trying the TOT flash method or the KDZ flash method?
Whenever i see a firmware flash fail it's almost always caused from a usb issue.
Try not to stress, i bricked my phone the other night and couldn't get it to flash for hours and couldn't figure out why, it turns out the 2014 PC i was trying to use wasn't having nothing to do with flashing my G3, but a 10 year old laptop got the job done without any hesitation.
Here's the guide i used to unbrick my phone, like i said other then the PC i was trying to use this worked perfect.
http://www.androidrootz.com/2014/07/how-to-unroot-lg-g3-all-variants.html
Here's a list of things you can try:
1. Try different usb ports on your PC, try using the usb ports on the back of your computer, they are the most reliable.
2. Try a differnt usb cable.
3. Make sure you have the correct driver, You should be using the LGUnitedMobileDriver
4. Try a different computer to flash all together.
My d855 is dead. I try to pass flash Tool with TOT and DLL and have the message: download fail
Can´t enter in download mode, TWRP, nothing.....
Help!!!!!
alemones said:
My d855 is dead. I try to pass flash Tool with TOT and DLL and have the message: download fail
Can´t enter in download mode, TWRP, nothing.....
Help!!!!!
Click to expand...
Click to collapse
If it is completly hard bricked try this => http://open-freax.fr/guide-unbrick-your-lg-g3/
I know there's one on xda too, but in my opinion this one is easier to follow and easier to understand.
If you'd like to check the xda one out too, here it is => http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
The download is corrupted and other is off
I have a LG G3 D855 with the marshmallow KDZ flashed with flash tool everything was good and had no problems. Two weeks ago i rooted my phone and the next day i wanted to install Xposed and after searching for a bit i installed it and got stuck in the bootloop. I managed to recover it by using the .tot method and since then my phone is messed up, like when im using it it restart for no reason at all, or just when it restarts i unlock it and 6/10 times it restarts again. I don't know what's wrong with it and i was hoping someone knows what to do since this is very anoying Thank you
On i've asked for help on Reddit, but maybe someone here knows a solution for it. I really don't know what to do anymore.
Hello,
do you want to backup your app data? Easiest way is flash KDZ via flash tool with CSE flash (format all).
Hey!
I guess i just softbricked my phone, by installing a D855 firmware thing, using LGUP, and don't know how to fix this. To be correct, it turns on to the LG logo, and stays there forever. I can use hard reset, and it does the job, but still bootloop thing. I can also get into download mode, but nowhere further than the LG logo screen if i just turn it on or something. Tried to use LG Flash Tool on multiple computers one after another. I followed guides for help with it, and did everything as they described, but the problem with this, is after i use LG Flash Tool with the correct .TOT file, and .DLL file, it will just say "Model Information Chech FAIL.", so i can't fix it by flashing the correct files. I've been trying everything for 2 days, but no luck. Please, can you guys help me? :'( I'm worried.
Update: My phone is now fixed. I don't know how it got fixed. My brother did it, and he doesn't tell me how he did it. :'D Anyways. It's now fixed, so thank you for everyone who messaged me about this with helps. ^^ After 2 days of trying, its finally fixed.
Here's the thing, I ****ed up:
Why:
1. I didn't do a back up
2. I tried to flashthe D85530B_00_1217 ROM that's for the 855 model, and I've the 855AR (wich apparently are not the same).
What I tried to fix the problem:
1. I try to restore it: Went to recovery mode and tried to do a factory reset. The phone just restart and I went back to the bootloop.
2. I try to re flash the phone using again the D85530B_00_1217, and then D855AR20A_00, none did work and the bootloop persists.
3. Ask for help (what I'm doing here).
My question:
Can i still fix this or I have to buy a new phone?
Notes:
I used the LG Flash Tool 2014
While flashing the phone, it did reach 100% before the app did, and reset itself (before the app reach 100%).
Thanks
Edit:
Ok, so I manage to fix it. I download LGUP (older version, the one that does not work with KMZ files) and manage to flash a tot file with the D855v10e version. After that my phone was functional again and I flashed the D85520a with LG Flash Tool 2014.
Hope it help someone with the same problem I have.
Ok, so I'm still stuck on this.
I'be also tried to unbrick it using LG FlashTool (the one you have to install) but when I try to flash the tot (the european one) file, I get "Download FAIL", "Model information Check FAIL". I think I may be using the wrong tot file but I can't find the one for D855AR model.
Anyone has any ideas on how to fix this? Or where can I find the right tot file?.
Thanks
Hi, recently decided to reset my phone back to stock as I had some trouble with a few programs after resetting my phone. I tried factory reset but the programs didn't work so I decided I would try to just restore to stock and start fresh. I followed a guide on how to do the stock restore using LGUP/LG Flash Tool. I followed the guide and put the KDZ File into the program and pressed cse flash. The program worked till around 12% then it got stuck and just didn't work anymore. It said error so I kept trying over and over as some guides on this problem said to keep trying.
Nothing has happened and my phone is now stuck on firmware update screen. I have taken the battery out multiple times and replaced it back in and turned the phone on but it automatically goes to that screen after showing the lg logo. I have tried the volume down and power button factory reset but that doesn't work and tried getting onto download screen if that was any help but couldn't do that either. Now I'm stuck here... Any help? Don't have any other phone and can't afford to get a new one so I would like to try fix this anyway possible.
After failing the flash update thing the program says failed my phone says 0%. It went to 1% once and then just went back to 0% after it didn't work. So don't know if it's been changed in anyway. All help appreciated.
Did you have LG up set at refurbish or upgrade.....
stinka318 said:
Did you have LG up set at refurbish or upgrade.....
Click to expand...
Click to collapse
I did refurbish first as I wanted to start new and it didn't work even though I did it a few times. I tried upgrade after and still nothing. Also have tried Uppercut and that does the same as normal LGUP.
The furthest % it got to was 19 on the computer and 8 on the phone and then it just stopped again. It usually stays between 11-19%. But most of the time 11%-16%
Have you made sure that it is the right region......
Try to down load just tot file and try that....
stinka318 said:
Have you made sure that it is the right region......
Try to down load just tot file and try that....
Click to expand...
Click to collapse
Where would the TOT files be? Can't seem to find any for LG H815 v20i ?
And what program should I use to do it?
Janny1993 said:
Where would the TOT files be? Can't seem to find any for LG H815 v20i ?
And what program should I use to do it?
Click to expand...
Click to collapse
This may help...........
http://storagecow.eu/index.php?dir=Xda/LG+G4/
If that don't work try this..........
https://forum.xda-developers.com/g4/orig-development/bl-lock-ul-android-6-0-marshmallow-t3459260