Develop Bugs

[Q] Camera Broken Upon Update?

Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?

DanielWGK said:
Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?
Click to expand...
Click to collapse
Did you try a restart, I have heard of camera problems like this before (i think first FroYo update) and all it needed was a simple reboot.

Reboot didn't work. I reflashed the rom and BAM, it worked again. Crisis averted.

I have the same problem.
I'm running the following:
Azreal 3.0
circular battery widget update
removed HTC lock screen
superior battery charging kernel
wifi hotspot patch
I'm currently trying things to figure out what will fix it.
Here are the current things I have tried that did NOT fix the problem:
Reboot
Wipe cache/davlik cache
fix UID mismatches
I then reflashed azreal 3.0
At this point the camera worked again but everything was wiped. I then reapplied the following patches:
Circular battery
remove HTC lock screen
wifi/hotspot patch
after this everything continued to work
I then applied:
superior battery charging kernel and it broke again
I think the problem is the superior battery charging kernel

i am having the same problem and have not been successful yet fixing it. switched from cm7 back to stock to update my prl and tryed to use the camera while stock when the black blank screen happened. flashed to evdo(sense) and same result. flashed back to cm7 and the 1st time i opened camera it opened the ffc. when i tried to switch and everytime i have tried to open it since i get "camera error cannot connect to camera" help plz!

If you have HW 0004 phone or HW003 with the new camera, you have to make sure your rom has a kernel with the NEW drivers. The kernel in my signature has the new drivers for ASOP roms (like cm 7).

just flashed Savaged-Zen-V002-CFS-HAVS-SBC-WiMAX - GB.zip
with the same result running cm7. seems like ive tried 20 different things with no success. everything i have flashed has been off my sd meaning i have had all of it running before at one time or another with no problem. i really cant think of what ive done new to have caused this

Same here
Happened to me right after I flashed calkulins_format_all.zip and then the MikFroyo4.4.zip yesterday. I thought it was a problem with mikfroyo so I flashed Azraelz 3.1 and still the same issue (i was using azrael 3.0 with no prob prior to mikfroyo).
I'll post if I find anything that works, please also give any suggestions i'm willing to try anything b4 i take her to sprint.

I also flashed calkulins evio rom. When I flash back to stock it will start running again sometimes. Not even right away though. It will be black for a while then if I just let the phone sleep for a bit and come back to it bam. Camera again. For a little while. Then back to the same thing an hour later without doing anything! This is very frustrating! Someone plz help!
Sent from my PC36100 using XDA App

UPDATE
I turned my phone off and switched SD cards to one that has an old backup (3.29, kernel#11), when I booted into recovery, I could hear clicking noices coming from the lens, at a super fast rate (say 2-3 clicks a second).
Not wanting to do any more damage I turned off the phone.
I did just take my phone to sprint to fix my kick stand, maybe they did something to mess with me (thats just my paranoid side speaking)...
But what gives? What would make the camera shutter do that while im in recovery (btw using latest amon ra recovery)?

My home button is not functioning.

Okay, so I had the g2 for a little now. However, I just recently rooted it. I used visionary r14, and eventually got s-off. I then downloaded ROM manager, and tried installing cyanogenmod 6.1.1. The installation didn't give me any errors, and when it was finally done, everything seemed like it didn't work, as if I had just done a normal factory reset.
I had assumed nothing changed, I didn't even have the superuser app installed. So then I tried going back to my homescreen and it wouldn't let me. The home button is not working. I can use the other three touch sensible buttons, but the home one seems to have been disabled. Would anyone know what could have led to this, and more importantly how can I fix it? For those curious, yes I still have s-off. Is there any way I can remove it, if only it would assure my home button would work again? Thanks in advance.
If anyone has any form of information at all, it would be extremely appreciated.
Sent from my T-Mobile G2 using XDA App

I'm running CM 6.1.1 Stable on my G2 (just a couple weeks old) and I've noticed that my home button doesn't work sometimes. It works about 95% of the time, but then it will do the occasional hiccup where nothing happens. If I touch it a few more times it will eventually start working again. Not sure what it is, but I read in another thread here that it could have something to do with how the CM ROM is configured for capacitive touchscreen sensitivity. And I believe I read that this has only been reported in CM and not other ROMs.

dutman said:
Okay, so I had the g2 for a little now. However, I just recently rooted it. I used visionary r14, and eventually got s-off. I then downloaded ROM manager, and tried installing cyanogenmod 6.1.1. The installation didn't give me any errors, and when it was finally done, everything seemed like it didn't work, as if I had just done a normal factory reset.
I had assumed nothing changed, I didn't even have the superuser app installed. So then I tried going back to my homescreen and it wouldn't let me. The home button is not working. I can use the other three touch sensible buttons, but the home one seems to have been disabled. Would anyone know what could have led to this, and more importantly how can I fix it? For those curious, yes I still have s-off. Is there any way I can remove it, if only it would assure my home button would work again? Thanks in advance.
If anyone has any form of information at all, it would be extremely appreciated.
Sent from my T-Mobile G2 using XDA App
Click to expand...
Click to collapse
Does it completely not working??, delayed maybe??
Sent from my HTC Vision using XDA App

Had this issue yesterday. I did a factory wipe from Clockwork and reflashed CM. Fixed it.

even iam facing the problem, but i guess mine is worst as the all(4) softkeys doesn't respond, but when i press it, i receive the feedback i.e it vibrates.
2nd issue: my physical keyboard layout is pretty much messed up, the symbol key which i press on my keyboard doesn't display the exact symbol
it would be kind if someone offer some solution for this
Rom: CM 6.1.1 (even tried nightly build #85)
Build: HK
P.S: i never had those problems in the stock rom

I'm having the same problem with CM6.1.1. I noticed it after installing Twidroyd app. I couldn't exit it via the home button...had to back all the way out. Uninstalled and still having the problem. Doesn't seem to be working at all now.

I had this sort of problem with my G1, I flashed the BiffMod ROM and some day, the phone just randomly did a factory reset, the background is set to how it was when I first flashed it and the home screen was back to normal like how it was when I first flashed it. My home button would not work, when I pushed the end call button to put the phone in sleep mode, it would turn off but if I were to press it again,the screen would turn on but it didn't go to the lock screen it just turned on. To fix it I went into recovery and wiped all five(I'm using Amon_Ra's recovery on it) then I booted back up and my home button worked again and when I put the phone to sleep, it turned back on like normal with the lock screen. That has happened a few times, some times when I did the wipe, every thing would start working again and my home screen still had everything placed where it is suppose to be. You could try to wipe everything, but I can't guaranty it because I don't even have my G2 yet so this has never happened to me on a G2.

i wiped everything data / cache ,flashed GingerVillain 1.4 , the softkeys won't work even in this rom, the only place where softkeys work is HTC's Stock rom. iam just wondering is it due to my build, as its Hong Kong build, so there is a possibility that the keymap for softkeys are different?
Update: Fixed! http://forum.xda-developers.com/showpost.php?p=9353194&postcount=1

Unresponsive Touch Screen...!!!

Sometimes the screen does not response to the touch... Though the hardware buttons and power buttons work... The only solution is to pull out the battery and reboot... Does any one else hv this problem ???

I had a similar problem only once. Which is the bottom part of screen stop responding to the touch
Sent from my LT15a using XDA Premium App

Looks like I'm not the only one. Whenever I install a ROM the first time it boots up, everything works perfectly. When I reboot, my touch screen doesn't work at all. The buttons all work, ad the screen changes when I tilt it, but the touchscreen doesn't work. Anybody find a solution?

Do you have an old Kernel? (.283)
Sent from my LT15i using XDA App

I used the kernel that came with the ROM (CM7.2 FXP103). I flashed back to the stock FW and the touchscreen works fine. Maybe a problem with the kernel?
-EDIT: I tried DoomLord's kernel and I had the same problem. I bought my phone in August.

have the same problem..I flashed the backup stock rom in CWM then same thing happen ...then I use SE PC Companion click repair... back to stock rom and problem solved..

Yeah, the stock ROM works, but it's laggy. I can't even install Acronium to reduce lag without having my touchscreen stop working on me.

MIUI problem

I have a problem with MIUI rom. Some days ago, my phone suddenly had FC, now, my phone run really slow and laggy... If I turn off the screen, my phone won't wake up, only four button in the bottom light up.
I wiped everything in CMW (system,data, and cache, also sd-card) but it doesn't work.
The fresh install had the same issues
I have this problem only with MIUI rom
any help

You probably need to provide more info on the issue. What version of MIUI are you running? Have you tried a fresh download of the ROM?

zandroid said:
You probably need to provide more info on the issue. What version of MIUI are you running? Have you tried a fresh download of the ROM?
Click to expand...
Click to collapse
i have tried from 1.8.5 to 1.9.2.
it's very weird
this guy has the same problem with me, maybe he can explain better than me
http://forums.miui.us/showthread.php?3740-Display-won-t-wake-from-sleep
Hey guys, I flashed 1.819 yesterday and everything was going great. The ROM ran smoothly and I was having no issues at all. When I woke up the next morning my display would not turn back on. Every time I tried to turn on the display the soft lights would light up but the display remained unresponsive. The phone still seemed functional as I could hear e-mail and sms notifications coming through.
When I rebooted my phone it was abnormally slow.. mounting the sd card and syncing seemed like it was taking forever and the launcher was very jittery.. if I let my display time out it would not come back on and I'd be forced to pull the battery and try again.
I performed a full wipe through clockwork recovery (everything, including wiping system,data, and cache in 'mounts and usb') and reinstalled 1.819. The fresh install had the same issues.. if I let my display time out I wouldn't be able to turn it back on. I thought I was having some wonky hardware issue but after flashing my previous sense rom and everything is working perfectly.. so I'm pretty much scratching my head here. My phone was kickass for one day and became allergic to MIUI overnight!
Click to expand...
Click to collapse

Have you tried using a different kernal such as Tiamat or JD's Kernal?
May want to try that. I had good luck with Miui and Tiamat (ran it for a week)

PacerguyDon said:
Have you tried using a different kernal such as Tiamat or JD's Kernal?
May want to try that. I had good luck with Miui and Tiamat (ran it for a week)
Click to expand...
Click to collapse
i have tried both

Does this happen immediately after you flash? Or are you installing applications to get back to your preferred setup and then seeing the performance problems?
If it's the latter, I'd run the rom alone and see if it runs normally. Then install your applications individually until you encounter issues.

ttupa said:
Does this happen immediately after you flash? Or are you installing applications to get back to your preferred setup and then seeing the performance problems?
If it's the latter, I'd run the rom alone and see if it runs normally. Then install your applications individually until you encounter issues.
Click to expand...
Click to collapse
immediately after the flash. I don't install any other apps

since we are talking about MIUI issues. I am running the latest version of MIUI with the JDKernal.
The camera has color distortion lines when I take a picture. The picture comes out fine but when taking it the image shows the distortion. It did not do that before so I can only assume its something with the camera in the ROM.
Anyone else see this?

spiderj said:
since we are talking about MIUI issues. I am running the latest version of MIUI with the JDKernal.
The camera has color distortion lines when I take a picture. The picture comes out fine but when taking it the image shows the distortion. It did not do that before so I can only assume its something with the camera in the ROM.
Anyone else see this?
Click to expand...
Click to collapse
Try different kernel
Sent from my Incredible 2 3D using XDA App

tenchu_712 said:
immediately after the flash. I don't install any other apps
Click to expand...
Click to collapse
tenchu, your signature says you are not English or American. Are you running the MIUI.us ROM on your incredible 2 in English - and not another language?
.....just a thought.

[Q] MildWild 9-Redux question.

Hi all, searched through the forums and can't find an answer to this. I just installed MildWild 9-Redux 2 rom onto my Desire after doing a full wipe. Great rom and everything is fast and stable so far but I can't see a Mildwild Menu in the settings. U know the one where u can change a whole bunch of settings ie time before screen locks or how the screen turns off when u press the power button ( like on old crt tv set powering down or not).I had an older version of Mildwild on before and the menu was there but on this rom it isn't. Can anyone who has this rom confirm the Mildwild menu is missing or do u have it? Also I noticed when u turn on the gps the icon at the top of the screen flashes while getting a lock - normal - but when it gets a lock is still keeps on flashing? It's the best rom I tried to so far and I would like to keep it.Hope someone can help.Thanks.

In redux mildwild, there aren't any mildwild settings. You have CPU and Interface instead.