Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?
DanielWGK said:
Anyone else have the camera load to a blank black screen with no buttons in any and all apps that utilize the camera? Camera, Barcode Scanner, Sniper Shot, and all other programs that use the camera fail to load since the update. Anyone have any idea as to why?
Click to expand...
Click to collapse
Did you try a restart, I have heard of camera problems like this before (i think first FroYo update) and all it needed was a simple reboot.
Reboot didn't work. I reflashed the rom and BAM, it worked again. Crisis averted.
I have the same problem.
I'm running the following:
Azreal 3.0
circular battery widget update
removed HTC lock screen
superior battery charging kernel
wifi hotspot patch
I'm currently trying things to figure out what will fix it.
Here are the current things I have tried that did NOT fix the problem:
Reboot
Wipe cache/davlik cache
fix UID mismatches
I then reflashed azreal 3.0
At this point the camera worked again but everything was wiped. I then reapplied the following patches:
Circular battery
remove HTC lock screen
wifi/hotspot patch
after this everything continued to work
I then applied:
superior battery charging kernel and it broke again
I think the problem is the superior battery charging kernel
i am having the same problem and have not been successful yet fixing it. switched from cm7 back to stock to update my prl and tryed to use the camera while stock when the black blank screen happened. flashed to evdo(sense) and same result. flashed back to cm7 and the 1st time i opened camera it opened the ffc. when i tried to switch and everytime i have tried to open it since i get "camera error cannot connect to camera" help plz!
If you have HW 0004 phone or HW003 with the new camera, you have to make sure your rom has a kernel with the NEW drivers. The kernel in my signature has the new drivers for ASOP roms (like cm 7).
just flashed Savaged-Zen-V002-CFS-HAVS-SBC-WiMAX - GB.zip
with the same result running cm7. seems like ive tried 20 different things with no success. everything i have flashed has been off my sd meaning i have had all of it running before at one time or another with no problem. i really cant think of what ive done new to have caused this
Same here
Happened to me right after I flashed calkulins_format_all.zip and then the MikFroyo4.4.zip yesterday. I thought it was a problem with mikfroyo so I flashed Azraelz 3.1 and still the same issue (i was using azrael 3.0 with no prob prior to mikfroyo).
I'll post if I find anything that works, please also give any suggestions i'm willing to try anything b4 i take her to sprint.
I also flashed calkulins evio rom. When I flash back to stock it will start running again sometimes. Not even right away though. It will be black for a while then if I just let the phone sleep for a bit and come back to it bam. Camera again. For a little while. Then back to the same thing an hour later without doing anything! This is very frustrating! Someone plz help!
Sent from my PC36100 using XDA App
UPDATE
I turned my phone off and switched SD cards to one that has an old backup (3.29, kernel#11), when I booted into recovery, I could hear clicking noices coming from the lens, at a super fast rate (say 2-3 clicks a second).
Not wanting to do any more damage I turned off the phone.
I did just take my phone to sprint to fix my kick stand, maybe they did something to mess with me (thats just my paranoid side speaking)...
But what gives? What would make the camera shutter do that while im in recovery (btw using latest amon ra recovery)?
Related
Hey,
I know there are a few threads on this but I haven't found one that followed through to a reported solution.
G2 rooted with CyanogenMod 6.1.1 since January of this year. Tried google goggles and the app locked up. I finally realized that was because the camera has stopped responding. When I pressed on the camera help, nothing changes for a few seconds, then it goes to a black screen. Eventually, (pressing on the back key helps) I'll get a force close/wait screen. Camera had been working fine the previous day.
I've tried clearing caches, using a different SD card with no changes. Used the opportunity to finally upgrade to CyanogenMod 7.0.3 and cleared all the caches as part of the flash. Tried the camera the first chance I could get the phone to that point. Same response from the camera (hesitate, black screen, force close).
So, is there anything else to try or is this a hardware camera failure?
Thanks for any help.
Try flashing some other rom. If that fails, then try flashing another radio.
I'd suggest taking a rooted stock rom and a stock radio just to be sure.
Thanks, but I'm trying to understand what any of that would do to fix the camera over what I've already tried.
I guess I'm looking for anyone that actually had a similar problem and either fixed it or failed to fix it.
Thanks.
Well for once the stock rom uses HTCcamera.apk to open the cam. Since you are using CM7 its a completely different apk.
Radio is somethign that is responsible for almost every device on your phone. Then the drivers that are in the Kernel, and then the ROM which has the apk, that uses the driver from the kernel to start the camera that is defined in the radio.
Well, nothing worked. Unrooted and back to stock (camera still doesn't work). Replacement phone is on it's way.
I have a problem with MIUI rom. Some days ago, my phone suddenly had FC, now, my phone run really slow and laggy... If I turn off the screen, my phone won't wake up, only four button in the bottom light up.
I wiped everything in CMW (system,data, and cache, also sd-card) but it doesn't work.
The fresh install had the same issues
I have this problem only with MIUI rom
any help
You probably need to provide more info on the issue. What version of MIUI are you running? Have you tried a fresh download of the ROM?
zandroid said:
You probably need to provide more info on the issue. What version of MIUI are you running? Have you tried a fresh download of the ROM?
Click to expand...
Click to collapse
i have tried from 1.8.5 to 1.9.2.
it's very weird
this guy has the same problem with me, maybe he can explain better than me
http://forums.miui.us/showthread.php?3740-Display-won-t-wake-from-sleep
Hey guys, I flashed 1.819 yesterday and everything was going great. The ROM ran smoothly and I was having no issues at all. When I woke up the next morning my display would not turn back on. Every time I tried to turn on the display the soft lights would light up but the display remained unresponsive. The phone still seemed functional as I could hear e-mail and sms notifications coming through.
When I rebooted my phone it was abnormally slow.. mounting the sd card and syncing seemed like it was taking forever and the launcher was very jittery.. if I let my display time out it would not come back on and I'd be forced to pull the battery and try again.
I performed a full wipe through clockwork recovery (everything, including wiping system,data, and cache in 'mounts and usb') and reinstalled 1.819. The fresh install had the same issues.. if I let my display time out I wouldn't be able to turn it back on. I thought I was having some wonky hardware issue but after flashing my previous sense rom and everything is working perfectly.. so I'm pretty much scratching my head here. My phone was kickass for one day and became allergic to MIUI overnight!
Click to expand...
Click to collapse
Have you tried using a different kernal such as Tiamat or JD's Kernal?
May want to try that. I had good luck with Miui and Tiamat (ran it for a week)
PacerguyDon said:
Have you tried using a different kernal such as Tiamat or JD's Kernal?
May want to try that. I had good luck with Miui and Tiamat (ran it for a week)
Click to expand...
Click to collapse
i have tried both
Does this happen immediately after you flash? Or are you installing applications to get back to your preferred setup and then seeing the performance problems?
If it's the latter, I'd run the rom alone and see if it runs normally. Then install your applications individually until you encounter issues.
ttupa said:
Does this happen immediately after you flash? Or are you installing applications to get back to your preferred setup and then seeing the performance problems?
If it's the latter, I'd run the rom alone and see if it runs normally. Then install your applications individually until you encounter issues.
Click to expand...
Click to collapse
immediately after the flash. I don't install any other apps
since we are talking about MIUI issues. I am running the latest version of MIUI with the JDKernal.
The camera has color distortion lines when I take a picture. The picture comes out fine but when taking it the image shows the distortion. It did not do that before so I can only assume its something with the camera in the ROM.
Anyone else see this?
spiderj said:
since we are talking about MIUI issues. I am running the latest version of MIUI with the JDKernal.
The camera has color distortion lines when I take a picture. The picture comes out fine but when taking it the image shows the distortion. It did not do that before so I can only assume its something with the camera in the ROM.
Anyone else see this?
Click to expand...
Click to collapse
Try different kernel
Sent from my Incredible 2 3D using XDA App
tenchu_712 said:
immediately after the flash. I don't install any other apps
Click to expand...
Click to collapse
tenchu, your signature says you are not English or American. Are you running the MIUI.us ROM on your incredible 2 in English - and not another language?
.....just a thought.
Good Afternoon,
I flashed my phone with a bunch of stuff a few weeks ago, and it's been running spectacularly, but the past few days, I've been having some issues getting my phone to boot completely. ADW would keep force closing, and my phone would randomly reboot, and I'd sometimes need to battery-pull to restart it from being frozen completely. Also, my volume buttons no longer work, and the screen occasionally goes 4-split screen from the keyboard opening ( I'm assuming flex ribbon ). Now today, after the the splash screen, the phone screen just goes black and stays like that. From reading around, I think I know what the problem is, but I was wondering if anyone more knowledgable could give some insight as well, specifically, if there's any chance it could be a software issue and **crosses fingers** not a hardware issue. I attached what I could get of the adb logcat.
Also, if it helps, here's some info about my phone:
Rooted & S-Off, with newest radio
Rom: nickmcminn60's XM-8 Vr 1.1
Kernel: Miguel's
Mods: darktremor A2SD & ?Firerat's? Custom MTD Partition
Any help or advice would be much appreciated.
1) don't use Miguel's kernel with these latest builds.
2) did you fix permission with rom manager to help with fc's.
3) I don't think this will fix the screen issues, that's is mostly hardware related.
Sent from my fingertips using Android.
Thanks for the help! I hadn't done fix permissions yet, as last time it somehow broke my rom. Unfortunately, I tried doing a nandroid backup first, yesterday morning before trying fixing permissions, and after my phone finished and rebooted, the phone just froze, and I couldn't reboot into recovery ( my volume buttons don't work ), and after a few reboot attempts, my screen died. I'm going to try ADBing into it tonight if I can.
In case I can get it fixed though, what kernels should I be using instead? I tried drowningchild's, but I seemed to have fewer issues with Miguel's.
Use stock cm kernel when using cm roms if using sense I believe nbetcher has a good kernel
Sent from my fingertips using Android.
Hi, the rear camera and flash seem to not be working a few days after installing Viper on my M9. Camera worked for about 1-2 days after flashing latest Viper ROM, but then stopped altogether. Anything trying to utilize the flash also doesn't work (HTC and Google flashlight). I've tried wiping the camera's data & cache, and I flashed the upgraded camera software that is available on Venom Hub, still no luck. Launching the camera app shows a black screen for a few seconds, then crashes back to home screen with no error message. Front camera works fine. Service provider is Sprint. Recovery is TWRP. I know that I could likely get a functioning camera back by re-flashing the Viper ROM or another ROM, but that's time consuming, and I'd prefer to only do that as a last resort. Any help greatly appreciated!
There is no fast way. Reflash the rom over the top, it shouldn't erase anything as you are recovering, not upgrading. Otherwise you're looking at going back to stock to test.
Sent from my HTC One M9 using Tapatalk
IncredibleHulk6 said:
Hi, the rear camera and flash seem to not be working a few days after installing Viper on my M9. Camera worked for about 1-2 days after flashing latest Viper ROM, but then stopped altogether. Anything trying to utilize the flash also doesn't work (HTC and Google flashlight). I've tried wiping the camera's data & cache, and I flashed the upgraded camera software that is available on Venom Hub, still no luck. Launching the camera app shows a black screen for a few seconds, then crashes back to home screen with no error message. Front camera works fine. Service provider is Sprint. Recovery is TWRP. I know that I could likely get a functioning camera back by re-flashing the Viper ROM or another ROM, but that's time consuming, and I'd prefer to only do that as a last resort. Any help greatly appreciated!
Click to expand...
Click to collapse
this happened to me without any software change (that I know of) just a hardware change. I even bought and installed a new rear camera which now allows the use of the front camera but the rear is not detected in the app and the flashlight just loops forever with a "loading" message. I am also SPRINT
Hi all,
I've been having quite a few problems with my month-old HTC 10, specifically with the camera (and the WLAN coverage, but at least that's working somewhat!) I finally unpacked it last week and have spent the whole week since attempting to fix the "Camera has stopped/Unable to connect to camera" problem. The selfie camera, however, is perfect and can be used in other apps, but attempting to switch to the camera on the back results in a freeze/force close. Considering I decided on the HTC 10 because of the camera quality, I'm a bit disappointed so far. A google search reveal a number of people having the same problem, but no real solution. Here's what I've done so far:
- Set up phone, comes with Nougat 7.0. Camera works at first, though seems to have problems with the auto focus. Camera app then updates overnight and stops working. Clear data/cache, remove updates, hard reset - no good. Flashlight does not work either, simply says "loading..." and stays like this indefinitely until closed.
- Factory reset, no change. Switch to safe mode, no change. Decided to unlock bootloader and install custom ROM after hearing that would fix it (I know, I know...I should have just sent it back at this point). Install Viper 5.10 + root with magisk, camera and flashlight still not working. Safe mode, not working. Full wipe in TWRP, RUU back to stock firmware (CID: HTC_034, flashed 2.41.401.3 signed firmware). Set up phone again on stock firmware, still no change in camera or flashlight.
- Install LeeDroid 10 3.7.0 custom ROM, root with magisk. I get a breakthrough here; turning off "OK Google" in settings gets the camera and flashlight working again! Still have the "laser autofocus blocked" issue, but I figure I'll deal with that later. Backed up with TiBu.
- Next day, decide to use a ROM that includes the latest security patches (got a bit annoyed waiting for HTC to push out the European updates, still on 1st January patch) so went for Resurrection Remix. Wipe, clean install etc. Camera stops working again, no change in safe mode. Wipe, clean flash back to LeeDroid, camera is no longer working, in normal mode or safe mode.
- Went through a bunch of custom ROMs at this point; ICE, Dirty Unicorns, LineageOS, then decided to try RR, LeeDroid and Viper again - camera still not working in normal mode or safe mode. With the ROMs that required GApps, used every package in both Open GApps and Dynamic GApps to install. No change to camera, Google Camera was unable to start as well.
- Flashed upgraded RUU (2.41.401.4 signed firmware) and went through the process of wipe/clean install custom ROM/test camera with all the above custom ROMs in normal mode and safe mode. No change in camera, though the ROMs were all excellently made
At this point I'm pretty stumped If it was a hardware problem, why did it work when I first installed LeeDroid, but not after? It's not been mishandled, it's just been sitting on my desk since I got it. The fact that it doesn't work in safe mode would suggest to me that ,maybe, a camera driver has been deleted somewhere along the way? I also tried a load of other methods I found on various message boards; flash it with no SD card inserted, flash without SIM card installed, etc. but absolutely nothing works.
Third party camera apps also don't work; most simply crash on starting. Open Camera says "Unable to access camera. Maybe being used by another app?", so I tried removing the permissions of all apps that had access to the camera except the camera itself - no change. Deleted cache/data/preferences of all apps - no change.
Finally, I had a look at the HTC diagnostics test using *#*# 3424 #*#* on the dialler - the camera test doesn't even show up! :crying:
I've run out of things to try at this point, so I'm posting this here to see if anyone can possibly shed some light on this very strange situation. Is there something I can do to fix it? Or should I start begging Amazon to give me a refund? Unfortunately I'm a week outside their 30 day return window...lesson learned for next time; if in doubt, send it back!
Oops, meant to post this in the Q and A forum. Don't want to spam a duplicate, is it possible to move it over?
Hardware issue. Contact HTC for a replacement. sounds like it may just not be connected. I had one with no working vibration notification, the motor would turn on, you could hear it, but the phone wouldn't vibrate. Got it replaced ASAP! I recommend you do the same!
FinnMacKool said:
Hi all,
I've been having quite a few problems with my month-old HTC 10, specifically with the camera (and the WLAN coverage, but at least that's working somewhat!) I finally unpacked it last week and have spent the whole week since attempting to fix the "Camera has stopped/Unable to connect to camera" problem. The selfie camera, however, is perfect and can be used in other apps, but attempting to switch to the camera on the back results in a freeze/force close. Considering I decided on the HTC 10 because of the camera quality, I'm a bit disappointed so far. A google search reveal a number of people having the same problem, but no real solution. Here's what I've done so far:
- !
Click to expand...
Click to collapse
Same issue here. The only thing that works for me (so far) is flashing back to a Marshmallow rom. HTC has been completely silent on this issue in terms of actually fixing the problem. They know the problem is there for only a small number of us and so aren't going to do anything about it. Fine. This was my first and will be my LAST htc phone. Buh bye htc, you'll never get another dime from me.
Did you fix the issue, coz i have the same in my HTC 10
Hi
follow my post in anildsouza73 blog..I will show how to fix it if someone really spoiled it...have a good day..
from yesterday morning the problem appeared to me. Initially, the difficulty in focusing, then rebooting the impossibility of opening the camera app and the flashlight. I found on Youtube the videos that showed the same problem. Is there a solution today?
Hi all
I found if I cleared my flashlight cache and then the camera cache, soft reset phone I could get the camera working again. Only problem now is the autofocus is not working properly. Any ideas for that?
Same problem. Focus stopped working, then I cannot launch camera app. Anyone found a solution?