Develop Bugs

possible solution for security fail problem on wave flashing

hi guys,
This is my first thread so please dont mind my mistakes
im here just try to provide possible answers to them , who were looking for "Security Fail" error while flashing Bada firmware over wave 1 2 or 3,
i hve able to recover my wave 1 from security fail error, and successfully flashed my wave1,
if you have security fail errors, try latest Multiloader v5.67 , (dont try older versions)
download Multiloader v5.67 from here http://www.mediafire.com/?s59s0xq99uj5bq7
after connecting phone with PC via USB in Download mode , check LIS checkbox,
if you want to flash boot file, check Boot Change(only boot change no other checkboxes) and load boot files from your downloaded firmware folder, after selecting boot files press download, wait for massage 'wait for reset', your phone will try to reboot but it will stuck at bada logo, dont worry, pull your battery, make your phone again in download mode , press PORT Search ,now uncheck all check boxes except LIS, (do not select Full Download , Master Rom or Diffrances only) now select Amss, Rsrc, Rsrc2(low), facotryFs, apps compressed, CSC, ShpApp, and fota file from downloaded Firmware folder to their respective fields, and press Download, wait untill massage "All files completed". your phone will boot if not try battery pull and again boot your phone, once booted do factory reset using this code *2767*3855#,
thats it
i have sucessfully recovered my wave 1 from security fail error and updated bada 2.0 XXLC2 using above method
hope it help others also,
please forgive me for my english
Take care

I tried flashing all the files but the phone is now stuck in the samsung loading screen. Please help

can not upgrade to the new boot loader for 4.4?

The Odin said tz.img nand write failure!
I still can use the n5110, but without the bootloader, can I use the new rom?

No. TZ stands for "Trust Zone". Explain to us the steps you took to flash. Also, which bootloader package are you trying to flash?

MrHyde03 said:
No. TZ stands for "Trust Zone". Explain to us the steps you took to flash. Also, which bootloader package are you trying to flash?
Click to expand...
Click to collapse
I am having the same problem. The steps are
1) I download everything from this page http://forum.xda-developers.com/showthread.php?t=2759863
2) then I put my note on download mode.
3) In PDA or AP I put bootloader file
4) then I press start, re-partition disable, but I failed and cannot flash bootloader
I tried all Odin, 3.0.4, 3.0.7, 3.0.9 and all giving the same error. And when I try to flash UK kitkat stock firmware, it fails giving NAND start up and then fail, I tried several times but I don't know what to do. I am running civz 4.2.2 rom right now and I want to update to kitkat

Try this: As always, do at your own risk.
Download: n5110_xxdne1-firmware.tar.md5
Download: odin304.zip
Start ODIN as administrator (right click, Run As Administrator) *recommended
Reboot into download mode and plug in the note 8
Make sure Re-Partition is NOT CHECKED, select PDA and select the n5110_xxdne1-firmware.tar.md5
Press start and wait a few moments. It's pretty quick. Afterwards, your device will automatically reboot.

[fix] frp lock on any phone !!!

Hello guys,today i will show u how to bypass frp lock without any data loss...
So let's start formally.....
I am not responsible for any damage to ur phone!!!!
Try this at ur own risk!!!
Requirements:
Pc
Win rar
Odin
Total commander
Stock firmware from sam mobile
Hello guys, i got a j700f and i flashed a custom rom,
Then i just restarted my phone and at boot screen i got "custom binary blocked by frp lock"
So just dont panic,
I will show u what to do to fix this....
Alll you have to do is just flash the stock recovery of ur phone using odin.
You will get this in stock firmware.
Just extract zip of stock rom and open tar img using win rar and there u will find recovery.img
Extract this and using total commander make a tar.img file of recovery.....
Extract odin using winrar
Then run odin as administrator and select file u made in pda/ap and flash!!!
Then reboot it will boot in ...
Note: Keep in mind u dont tick "nand erase option"
Recovery u used MUST BE extracted from your model number's firmware only!!!!

any help for my s4 mini lte?????

my phone not boot , when I flash it with odin nothing happened just boot in recovery mode but without entry to recovery
Then I try with 4 files the result it's failed ( bootloader failed ) bootloader v1
Please if there's a solution or any thing to do or if there's bootloader ap swrev: 2 file to flash it
Imp: I can entry to download mode.
Sorry for bad English

Galaxy a70 a705fn stuck on partition boot reason boot : hash of data does not match d

Galaxy a70 a705fn stuck on partition
<!>
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : F5877D7EDC. (VEMETA) : 98EEF63C0
SAMSUNG boot. A706FNXXU5BTE3, 31342670R
VBMETA A705FNXXU5BTC2, 296911020R
Plz i cant flash stock firmware now it happened after a minor update

Same here but with the following parameters:
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : A7681EDC3D. (VEMETA) : 98EEF63C0
SAMSUNG boot. A705FNXXU5BTF1, 31708158R
VBMETA A705FNXXU5BTC2, 29691020R
Also after a minor update, please help!
NB: Phone was rooted but later flashed official ROM but left bootloader unlocked.

winterxda said:
Same here but with the following parameters:
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : A7681EDC3D. (VEMETA) : 98EEF63C0
SAMSUNG boot. A705FNXXU5BTF1, 31708158R
VBMETA A705FNXXU5BTC2, 29691020R
Also after a minor update, please help!
NB: Phone was rooted but later flashed official ROM but left bootloader unlocked.
Click to expand...
Click to collapse
I used the following solution which I found on a Samsung forum and it worked!
:good::good::good:
Hello Every One,
I had the same issue after trying to update my A70 phone based on a message which poped up from samsung asking me to update.
A friend of mine managed to resolve my issue without losing any data using that method:
1st : from the error msg --- > last line you will find the firmware version ex: A705FNXXU4ASK6
2nd: Goto https://www.sammobile.com/ --> Devices --> Choose your model --> Firmware --> Choose your country and download the firmware. (Download it and unzip it)
3rd: Download a software called Odin and follow the instruction ( MAKE SURE TO UNCHECK RE-PARTITION FIELD FROM OPTIONS TAB) IF YOU WANT TO KEEP YOU DATA
4th: In my case i have a new model so i uploaded the following 4 files ( BL , AP , CP , HOME_CSC) after i pluged the cable.
Dont forget to uncheck the Re-partition.
Click Start

winterxda said:
Same here but with the following parameters:
boot reason boot : hash of data does not match digest in description . (2nd) (3)
Calculated hash of (boot) : A7681EDC3D. (VEMETA) : 98EEF63C0
SAMSUNG boot. A705FNXXU5BTF1, 31708158R
VBMETA A705FNXXU5BTC2, 29691020R
Also after a minor update, please help!
NB: Phone was rooted but later flashed official ROM but left bootloader unlocked.
Click to expand...
Click to collapse
It locked my boot loader And I was previously fully rooted Now I’m stuck on the blue screen

My tablet starting you shut off for 30sec then come back on. Then it started to this **** completely off and reboot and they will get to the home screen and when I would soon as I would open an app it would reboot all over again and I did it over and over and over then I was trying to clear the chase and somehow it did this and I was previously fully rooted with supersu and the maskis one