Hi Guys,
Recently my screen has not been working properly. On the CM10 Nightly I was using, the screen would not display the right image, and would be slightly fuzzy. Other times, the screen would not turn on but the soft buttons at the bottom of the screen would still be working.
The solution that came to my mind was to flash back to Android Revolution HD, which had worked perfectly for me in the past. The screen fuzziness has been fixed, but unfortunately the screen no longer turns on. My phone has decided to randomly work again, but later the screen will stop working again.
Any help would be greatly appreciated.
Thanks,
DarkyHero
Related
Hi there,
I experience a weird problem with my Defy that noone else seems to have.
Sometimes my Defy just won't come back from Standby, the Screen stays black. The Touchbuttons at the bottom get luminated if I press the On/Off button, and you can see that the backlight of the screen works as the screens turn into a lighter shade of dark ( ), but still the screen stays black. I know that the phone stays on, as I get haptic feedback by long pressing the Off button.
I had my phone at datrepair for the issue and it came back with a standard Froyo (DACH Retail), but as soon as I flash to other Roms like CM7 or other Froyo builds, voila there it is, screen blacking out from time to time.
Until now I didn't find anyone with that problem, but perhaps any of you guys knows a solution for that problem, as I'm very keen to use CM7, since the Rom is just fabolous. I just don't have the nerves to solve the black screen by removing the battery and inserting it back again every single time it turns up...
Thanks in advance for any help.
Hi,
I recently flashed to JB and everything was working fine, I then wanted to lower the lcd density, so I downloaded lcd density modder and set it to 200 and rebooted the phone, only to have it stuck on a glowing black screen.. meaning it wasn't that the screen was off, it was on, but it was just black.. not responsive (it was plugged in as well into a wallcharger) I tried the same thing again, and while waiting for it to reboot, passed out and fell asleep. woke up in the morning to find it on that same screen, so went into recovery and rebooted the device, only to have a VERY sensitive power button.. even when im not pressing on it and am pressing above the button on the side of the phone it reacts.. it's very annoying and inconvenient..
I have a SGH t989d with Telus. I was running CM10 4.1.1 alpha1a with Darkside 6.0
I've tried recovering to before this issue and it still exists, I tried reflashing everything from scratch and it still exists, and I even tried to open up my phone and see if there was anything that was stuck there, and nothing..
any help would be greatly appreciated
Hi Guys,
Recently my screen has stopped working. The screen remains black but I know the phone is still working because when I press the power button the menu buttons light up. I am able to fix the situation temporarily by doing a soft reset, holding down power button for 10 seconds, and screen will turn on, but later my phone screen stops working again.
BTW I am on Android Revolution HD 9.7.2
Do any of you guys know what I should do?
Thanks.
DarkyHero
RE
kartik50 said:
Hi Guys,
Recently my screen has stopped working. The screen remains black but I know the phone is still working because when I press the power button the menu buttons light up. I am able to fix the situation temporarily by doing a soft reset, holding down power button for 10 seconds, and screen will turn on, but later my phone screen stops working again.
BTW I am on Android Revolution HD 9.7.2
Do any of you guys know what I should do?
Thanks.
DarkyHero
Click to expand...
Click to collapse
Sounds like an bad display...try to get it to service if u still have a warranty
I think it could be related to your custom rom. You should try a different rom or go back to stock rom before sending your hox to repair. If screen is booting up properly when you did a soft reset, it sounds more like a software problem for me than a hardware one.
Hi all,
Today i recieved my 4th display for my one x.
The first one cracked, the second and third display were DOA (Dead spots in digitizer).
I took out the old screen and placed the new one.
Tested the phone before assembling again, and it worked perfectly fine.
Assembled the phone, and the screen didnt turn on, the button lights did though.
Disassembled the phone and it worked.
After assembling another time i couldn't get it to work at all anymore.
When i press my power button, the button lights go on but the screen stays black (it's not only the backlight).
The previous screen doesn't work anymore either.
It's not the connection, and the mainbord looks perfectly fine.
Rebooting the phone doesn't give me a solution either.
Is there anyone who had this problem before / Knows what it could be and how to fix it?
Thanks in advantage!
I have HTC 8s two days back. The phone was working very nicely and I was enjoying to use it. But last night, suddenly the word "restarting" flash on the screen and saying "goodbye" phone turned off. After a while, I pressed the power button to start it, the logo of HTC quietly brilliant was appeared and after it, two signs of shape like setting icon in the phone are appearing and phone is not booting itself. What is the problem with my phone, I don't know. Can anyone help me?