I'm on a REALLY tight budget, and I've found this:
http://www.amazon.co.uk/Aluminum-Bu...VG/ref=sr_1_67?ie=UTF8&qid=1352551327&sr=8-67
Has somebody tried it before? Do the cover-buttons have a good response (is much more force needed to make them "click")? Any suggestions?
while it might provide a unique look to your phone, i'm not sure how much 'protection' a metal bumper will give.
once that aluminum meets concrete, it'll scratch/dent and it wont look as pretty.
I had an Element Case Vapor AR15-V when it was released for the iP4. I loved the look but it killed my reception..
I don't think/know if the S3 would fall victim to such an issue..
alt0160 said:
while it might provide a unique look to your phone, i'm not sure how much 'protection' a metal bumper will give.
once that aluminum meets concrete, it'll scratch/dent and it wont look as pretty.
I had an Element Case Vapor AR15-V when it was released for the iP4. I loved the look but it killed my reception..
I don't think/know if the S3 would fall victim to such an issue..
Click to expand...
Click to collapse
The aesthetic side of it is of no importance for me. On the reception issue, it was reportedly due to the antenna being linked to a section of the metal frame the iPhones had, so no problem here regarding the S3 i pressume.
Myscha said:
After breaking the front glass of my SGSIII yesterday while wearing a silicone bumper, I'm going to buy a new glass (this one) on Amazon, but I think I need something stronger than silicone or TPU.
The thing is I'm on a REALLY tight budget, and I've found this:
http://www.amazon.co.uk/Aluminum-Bu...VG/ref=sr_1_67?ie=UTF8&qid=1352551327&sr=8-67
Has somebody tried it before? Do the cover-buttons have a good response (is much more force needed to make them "click")? Any suggestions? Please, halp, I don't want to go through the same ordeal again
Click to expand...
Click to collapse
I have one in blue, it works good but is lose just like that so I put pieces of tape to make it tight on the phone n also helps it not scratch the bezel .. all the buttons are accessible with no problems
Sent from my SGH-T999 using xda app-developers app
jorgerangel159 said:
I have one in blue, it works good but is lose just like that so I put pieces of tape to make it tight on the phone n also helps it not scratch the bezel .. all the buttons are accessible with no problems
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I suppose you recommend it?
Edit: I've seen these (http://www.amazon.co.uk/Urban-Armor...3?s=electronics&ie=UTF8&qid=1352595740&sr=1-3) around, and although they seem quite nice, they surpass my budget right now. Any cheaper version of sorts? I think composite could do the trick just as fine.
Does anybody know something similar to the Urban Armor Gear (cheaper and less fancy) that could be of use?
i've always wondered if those slide on thing in the front actually stays on properly or not... I kinda prefer to have the screw on type... i think it's kinda cool.. the only thing I worry about is I don't know if the camera lens would get scratched when i place it on the back.
mputtr said:
i've always wondered if those slide on thing in the front actually stays on properly or not... I kinda prefer to have the screw on type... i think it's kinda cool.. the only thing I worry about is I don't know if the camera lens would get scratched when i place it on the back.
Click to expand...
Click to collapse
The sliding one I'd on there to good lol sometimes I can't even take it off and regarding that it might scratch the screen I haven't had that problem but then again I only use this case one the weekend
Sent from my SGH-T999 using xda app-developers app
mputtr said:
i've always wondered if those slide on thing in the front actually stays on properly or not... I kinda prefer to have the screw on type... i think it's kinda cool.. the only thing I worry about is I don't know if the camera lens would get scratched when i place it on the back.
Click to expand...
Click to collapse
Screw on type? can you post a link to one of those so I can see what it is, please?
they're all expensive.
Draco Design
Sweet Armor s3
and this: http://www.ebay.com/itm/New-Deluxe-...724&pid=100015&prg=1006&rk=1&sd=280995627053&
but it doesn't cover the power and volume button...
mputtr said:
they're all expensive.
Draco Design
Sweet Armor s3
and this: http://www.ebay.com/itm/New-Deluxe-...724&pid=100015&prg=1006&rk=1&sd=280995627053&
but it doesn't cover the power and volume button...
Click to expand...
Click to collapse
That link says it's 13~, but in Amazon UK all Dragon design cases I find are around 70€. Right now I've found this
http://www.amazon.co.uk/Otterbox-Co...1?s=electronics&ie=UTF8&qid=1352662906&sr=1-1
well. the otterbox is not a bumper as well, so that's up to you. i had the commuter for the htc DZ and while it is nice, it also doubled the size of the phone.
and yeah, i didn't say the nicer bumpers were cheap,. i said they were expensive.
Sent from my GT-I9300 using xda app-developers app
Related
Im about to order a case but not sure, ive seen this one but im not sure how long it will last in terms of it getting scratched up.
Here
BlitzyMannna said:
Im about to order a case but not sure, ive seen this one but im not sure how long it will last in terms of it getting scratched up.
Here
Click to expand...
Click to collapse
Too flashy for me... But that's just me. There's also a detailed review around here somwhere about the premium aluminium case that is pretty similar, only matt black. In my opinion that's a lot better suited
Then again, it's just me. If you're wondering about protection, then I suppose it does offer quite a lot of it
In my experience metal casing never feels comfortable in the hands, at least on mine never did. All those edges starts to hurt your hands in long usage :/
Sent from my GT-N7000 using Tapatalk 2
Metal casing can affect signal attenuation. I wouldn't recommend metal.
Sent from my GT-N7000 using xda premium
That case looks awesome, very sexy with the white, kind of reminds me of Real Madrid. I heard the same about metal cases effecting signal though.
I would still consider it if it was available in black or gunmetal for mine.
Sent from my GT-N7000 using XDA
bigboxrate said:
What about this one, especially for Man Utd fans and much cheaper
I will buy this one to change the look of my Note
http://www.tinydeal.com/m-pxq1q7-p-55557.html
Click to expand...
Click to collapse
This looks good !!
BlitzyMannna said:
Im about to order a case but not sure, ive seen this one but im not sure how long it will last in terms of it getting scratched up.
Here
Click to expand...
Click to collapse
I like the look of these bumper cases, but I don't like their size (width/height). I think they don't fit in my pockets.
No way i would put that on my Note its metal connected to the outer polished note metal.. i bet you A month down the road your trim on the note will get damaged...
Hey guys,
So Im fully migrated and with lots of cases to review. Im gonna start the serie with the Cruzerlite androidified. This case is one of my favorite ones (next to the diztronic) Its a perfect match between budget and looks. ITs thin, has the android in the back and gives good protection.
Here it is guys!
http://youtu.be/1RxYErG50A0
i also love this case... fits very snug
i just got mine today, anyone else have the holes slightly off?
Thanks for the video review. The sides look a little flimsy though. I still will probably buy one just because it has Andy the Android on it
RotaryXperiment7 said:
i just got mine today, anyone else have the holes slightly off?
Click to expand...
Click to collapse
Mine are. I think the US Variants are a little thicker than the International models.
ReggieTee said:
Mine are. I think the US Variants are a little thicker than the International models.
Click to expand...
Click to collapse
No. You just need to fiddle with the case until everything lines up. There's a certain way to put on right.
zmore said:
No. You just need to fiddle with the case until everything lines up. There's a certain way to put on right.
Click to expand...
Click to collapse
This.
When i first got mine i thought it didnt quite line up right, but then i figured out how to put it on right.
Dont start with a corner, start at the top or bottom and line up the mic hole. The other end will line itself up.
The fit really is perfect.
kegacide said:
i also love this case... fits very snug
Click to expand...
Click to collapse
yep its super snug , which is a must for me!
faulkton said:
This.
When i first got mine i thought it didnt quite line up right, but then i figured out how to put it on right.
Dont start with a corner, start at the top or bottom and line up the mic hole. The other end will line itself up.
The fit really is perfect.
Click to expand...
Click to collapse
exactly, Its all about moving the case, Remember it is a tpu case therefore u can manipulate it a little bit. Dont get me wrong I thought the same thing, however after playing with it a little, it is just user error until placed correctly
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
taier said:
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
my video is with the tmo version
All Galaxy SIII are exactly the same physically. All cases and accessories ate interchangeable.
Sent from my SAMSUNG-SGH-I747
Btw - if you can't stand to look at the splotchy parts on the back of the translucent cruzerlites where it sticks to the phone, I followed another's recommendation by smearing a tiny bit of baby talcum powder inside the case, and it seems to work.
Maybe this is something cruzerlite could do at the factory? Talcum powder is a 1 on the mohs scale of hardness, so it's not an abrasive.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
zaisaroni said:
All Galaxy SIII are exactly the same physically. All cases and accessories ate interchangeable.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
This!!! And it's actually a very good thing imho
Sent from my SGH-T999 using xda premium
zmore said:
Btw - if you can't stand to look at the splotchy parts on the back of the translucent cruzerlites where it sticks to the phone, I followed another's recommendation by smearing a tiny bit of baby talcum powder inside the case, and it seems to work.
Maybe this is something cruzerlite could do at the factory? Talcum powder is a 1 on the mohs scale of hardness, so it's not an abrasive.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Damn, that's a good idea. I just tossed the cruzerlite to the side and got a speck case. I am going to have to try that. I like switching up cases every couple of weeks.
Pretty nice!
I just got mine today from Amazon.
Initials impressions is that it is quite nice. It fits pretty snug and looks nice on the phone. Especially if you like Andy the android. It is way easier to hold my phone now, especially with the side grips. I much prefer this soft TPU feel than to the hard plastic. There is a nice quality feel to the material.
My only complaint is the same as the users above me mentioned, the splotchy wet look on the back. Easily overcome with the talcum powder suggestion. Thanks zmore! Good looking out :highfive:
Phone is still quite thin after it is on. All in all, good buy, I highly recommend!
Now, back to flashing!
SmokeRob said:
I just got mine today from Amazon.
Initials impressions is that it is quite nice. It fits pretty snug and looks nice on the phone. Especially if you like Andy the android. It is way easier to hold my phone now, especially with the side grips. I much prefer this soft TPU feel than to the hard plastic. There is a nice quality feel to the material.
My only complaint is the same as the users above me mentioned, the splotchy wet look on the back. Easily overcome with the talcum powder suggestion. Thanks zmore! Good looking out :highfive:
Phone is still quite thin after it is on. All in all, good buy, I highly recommend!
Now, back to flashing!
Click to expand...
Click to collapse
do you have any pictures
I had the same problem with the cutouts, but you can move it enough to line them up more or less. The cutouts are so big, they do not feel precision cut at all.
I imagine the talc trick would also make the case easier to move on the phone.
Not great with invisible shields as the case can pull up the edges due to the tight fit.
Overall, great for 10 bucks though.
taier said:
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
you want i9300 not i9100 btw
Droidguy987 said:
do you have any pictures
Click to expand...
Click to collapse
Actually, Amazon has some decent pictures up on their site.
Sorry, I can't post a link since I have so few posts. But if my attachments come through, there are a couple pictures.
I was wondering if anyone tried the combination of the diztronic case and a mercury screen protector. The new mercury SP's doesnt cover the entire front anymore (see picture) and was hoping the rest of the front would be covered by the diztronic case.
I have the SP and matte case diztronic, and it shows a little bit of the S3 front screen when the case is on. its unnoticeable though. I have a blue Galaxy S3 and black case, black SP.
Xcor3 said:
I have the SP and matte case diztronic, and it shows a little bit of the S3 front screen when the case is on. its unnoticeable though. I have a blue Galaxy S3 and black case, black SP.
Click to expand...
Click to collapse
can you provide a pic
I hope they're good enough. But let me know if you need better pics. Also I included one pic with the lumi bumper, just in case you buy one
Sent from my SGH-T999 using xda app-developers app
Xcor3 said:
I hope they're good enough. But let me know if you need better pics. Also I included one pic with the lumi bumper, just in case you buy one
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
That actually looks really nice. I really like that the screen protector covers the Samsung logo, but hate that it adds the Mercury logo to the front of the phone. I would love to have an all black S3 with no logos but, alas, I've yet to find a way to do that.
dmx0
try bullkin. I think there's a thread somewhere here with a direct link to buy from china.
the only drawback is that the menu/back key barely lets the light through.
EDIT: since it ships from china, it will take a while, but i have the red one and it covers up nearly everything save a tiny sliver on one or the other side.
mputtr said:
dmx0
try bullkin. I think there's a thread somewhere here with a direct link to buy from china.
the only drawback is that the menu/back key barely lets the light through.
EDIT: since it ships from china, it will take a while, but i have the red one and it covers up nearly everything save a tiny sliver on one or the other side.
Click to expand...
Click to collapse
Lol. I also posted one of the bullkin link. Check the thread
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 04:38 AM ---------- Previous post was at 04:38 AM ----------
dmx0 said:
That actually looks really nice. I really like that the screen protector covers the Samsung logo, but hate that it adds the Mercury logo to the front of the phone. I would love to have an all black S3 with no logos but, alas, I've yet to find a way to do that.
Click to expand...
Click to collapse
Yeah, I do prefer not having the logo there. It ruins it
Sent from my SGH-T999 using xda app-developers app
well, there ya go. try the bullkin if you want.. it's not expensive as well.
btw xcor, have you received the screen protector yet? I'm interested in getting a couple of red spares for myself.
Sent from my GT-I9300 using xda app-developers app
mputtr said:
dmx0
try bullkin. I think there's a thread somewhere here with a direct link to buy from china.
the only drawback is that the menu/back key barely lets the light through.
EDIT: since it ships from china, it will take a while, but i have the red one and it covers up nearly everything save a tiny sliver on one or the other side.
Click to expand...
Click to collapse
do you have a case on the s3 or just the sp? because i really want the diztronic case and trying to figure out which SP would be best to pair with it
I didnt order the bullkin one. I kind of prefer the mercury because its anti glare. lol.
Btw, my phones back cover has a xtremeguard back protector and when its not there, the case wraps much better on the phone and doest show the original screen of the phone
You can also try these http://www.ebay.com/sch/doubleid/m.html?_nkw=&_armrs=1&_from=&_ipg=200&_trksid=p3686
looks cheap but well never know
ahh i c. i somehow thought you ordered a bunch for yourself to test out.
Sent from my GT-I9300 using xda app-developers app
mputtr said:
ahh i c. i somehow thought you ordered a bunch for yourself to test out.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
so do you use the bulkin SP with a case or just the SP?
currently just the bullkin sp. im actually looking to get a metal bumper but i dont want to pay 70 bucks for a decent one w screws on it.....
I'm thinking of doing a mod on a cheap metal case and somehow combine it w a silicine case that I have
Sent from my GT-I9300 using xda app-developers app
mputtr said:
currently just the bullkin sp. im actually looking to get a metal bumper but i dont want to pay 70 bucks for a decent one w screws on it.....
I'm thinking of doing a mod on a cheap metal case and somehow combine it w a silicine case that I have
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
http://www.sunsky-online.com/product/default!view.do?subject.id=258071
try that...its a metal bumper with screws and way cheaper than 70 bucks
krash183 said:
http://www.sunsky-online.com/product/default!view.do?subject.id=258071
try that...its a metal bumper with screws and way cheaper than 70 bucks
Click to expand...
Click to collapse
thanks a bunch. That was the one I was looking for (but in red) I know ebay has some for sale and I remembered someone here said they're buying one so i'm waiting to hear their response in regards to "lift" for the bumper.
the only thing that bothers me about that case is that it's a cutout of the buttons rather than a cover.. but that's why i'm thinking of taking apart my other case to modify to do so. I'll see if I can post results if it's successful.
EDIT: i'm specifically looking at this one: http://www.ebay.com/itm/370637881792?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
mputtr said:
thanks a bunch. That was the one I was looking for (but in red) I know ebay has some for sale and I remembered someone here said they're buying one so i'm waiting to hear their response in regards to "lift" for the bumper.
the only thing that bothers me about that case is that it's a cutout of the buttons rather than a cover.. but that's why i'm thinking of taking apart my other case to modify to do so. I'll see if I can post results if it's successful.
EDIT: i'm specifically looking at this one: http://www.ebay.com/itm/370637881792?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Click to expand...
Click to collapse
http://www.sunsky-online.com/view/258069/Removable+Metal+Companion+Bumper+Frame+Case+for+Samsung+Galaxy+SIII+++i9300++Red+.htm
this one is red.... im thinking about try it because i have the same one but the slider version and not the screw.
Let me know if it works well with the bullkin SP.
also i like the cutouts.... cases with a cover over the buttons tend to be too sensitive or impossible to press the buttons
sounds good. when i get to modding mine. i'll post a review of some sort.
oh god. that case, i have a black one of that. One of the screws goes through the hole, but this is because of the case being defective. But the piece where the screw rests, gets. The case looks good though, but the buttons are too deep in the case. You wont be able to press them with ease. Maybe when youre done modding ill try the case again.
Xcor3 said:
oh god. that case, i have a black one of that. One of the screws goes through the hole, but this is because of the case being defective. But the piece where the screw rests, gets. The case looks good though, but the buttons are too deep in the case. You wont be able to press them with ease. Maybe when youre done modding ill try the case again.
Click to expand...
Click to collapse
I'll report back with pictures and a summary of what I did. I'm just waiting to hear back from the other member who was buying from the same seller.
btw, since you said you have that case, when you place the phone on its back, does the camera lens still touch the surface it's laying on or does it give abit of space?
mputtr said:
I'll report back with pictures and a summary of what I did. I'm just waiting to hear back from the other member who was buying from the same seller.
btw, since you said you have that case, when you place the phone on its back, does the camera lens still touch the surface it's laying on or does it give abit of space?
Click to expand...
Click to collapse
No it will not touch the surface. And btw, if you end up buying the case, let me know and I'll send you mines, I have no use of it. But only the bottom piece will be usable.
Sent from my SGH-T999 using xda app-developers app
MrThaibox23 has put a youtube video clip reviewing the Official HTC One Genuine Hard Shell Case with Cover and he certainly does not recommend it. Unhappy with fit and poor quality and bad value for money.
Still waiting for my HTC One and am reluctant to cover the beauty of the design so the questions are:
Cover it with a case Yes / No
Recommend or warn us off any case you bought.
Many thanks and over to you.
I actually like the case and im using it right now
I got the case free from Vodafone with the HTC One and I think it's pretty good, for a free case that is.
Reckless187 said:
I got the case free from Vodafone with the HTC One and I think it's pretty good, for a free case that is.
Click to expand...
Click to collapse
I also got the case free from Vodafone and couldn't believe that the hole for the mic does not line meaning nobody can hear me when I'm using the case, has nobody else experienced this???
It fits the phone perfectly and states for the HTC One on the box (ruling out them sending me the wrong case) and I've definitely fit the case correctly (ruling out stupidity).
matteus240 said:
I also got the case free from Vodafone and couldn't believe that the hole for the mic does not line meaning nobody can hear me when I'm using the case, has nobody else experienced this???
It fits the phone perfectly and states for the HTC One on the box (ruling out them sending me the wrong case) and I've definitely fit the case correctly (ruling out stupidity).
Click to expand...
Click to collapse
Do you Talk about the flip case or hardshell?
I had this microphone Problem with the flip case and solved it by making the hole for the microphone on the case bigger.
Not just me then, yes I refer to the flip case. Not the sort of quality you expect from a 'premium' official case. If I wasn't amazingly impressed with the phone I'd be letting rip at HTC!
Its a shame the screen wouldn't come on as you flip the case over though!
The flip case is okay, poor quality though.
I also got the official flip case for free with my phone. I was really disappointed with it. OK I got it for free but seriously HTC... Couldn't they make a decent official case for their incredibly beautiful save the company flagship phone. They should have used proper leather and included some magnets to keep it closed and wake the screen when opened like Samsung do with their case.
tdingene said:
I also got the official flip case for free with my phone. I was really disappointed with it. OK I got it for free but seriously HTC... Couldn't they make a decent official case for their incredibly beautiful save the company flagship phone. They should have used proper leather and included some magnets to keep it closed and wake the screen when opened like Samsung do with their case.
Click to expand...
Click to collapse
My flip case is literally falling apart at the seams. Don't pay for this what ever you do.
Sent from my Nexus 7 using Tapatalk HD
matteus240 said:
I also got the case free from Vodafone and couldn't believe that the hole for the mic does not line meaning nobody can hear me when I'm using the case, has nobody else experienced this???
It fits the phone perfectly and states for the HTC One on the box (ruling out them sending me the wrong case) and I've definitely fit the case correctly (ruling out stupidity).
Click to expand...
Click to collapse
Yup had this problem as well. I was so confused when people told me they couldn't hear me.
Whilst a terrible case it's better than what I got free with the last 3 phones.
But if I had paid cash for it I would not be terribly pleased.
Sent from my HTC One using xda app-developers app
supermannn said:
Is this the black one with the inner red lining? I think i saw a review on it on android central
Click to expand...
Click to collapse
Yeah. They obviously didn't have any kind of durability testing. Tip... Don't believe everything you read in reviews
Sent from my Nexus 7 using Tapatalk HD
i have the double dip hard shell case on fine and find the fit is quite loose on the phone, the other thing that really bugs me is that the volume buttons dont work correctly. i have found that there is very little tactile feedback and that you then tend to press the buttons harder which then causes the area of the case around the buttons to miss shape..very poor which is a shame as i actually really like the overall look etc of it.
Anyone else found this or could i just have a bad case?
I think I'll get hard shell case.
Dharkan said:
I think I'll get hard shell case.
Click to expand...
Click to collapse
This is a fantastic phone so get any reasonable case for now until better 3rd party cases become available. I prefer the hard case over the HTC flip case.
Sent from my HTC One using xda premium
i liked the hard case when i first saw it, but now i just think its cheap and nasty looking.
have a look at nillkin case. im using it now and posted pics in the "cases and covers" thread near the end
The flip case is great, the only down side is that the microphone hole in the case doesn't line up 100% of the time and when making calls sometimes I have to take the phone out of the case for the person to hear me
Sent from my HTC One using xda app-developers app
supermannn said:
Is this the black one with the inner red lining? I think i saw a review on it on android central
Click to expand...
Click to collapse
Yes that is correct
I would get the leather pouch from www.pdair.com, that way, the magnificent design of the phone will be visible every time I pull out the phone out from the pouch =)
abhs89 said:
Yup had this problem as well. I was so confused when people told me they couldn't hear me.
Click to expand...
Click to collapse
My mate called me on his the other day, I kept telling him I couldnt hear him.
It turned out to be the HTC official flip case hole, as per other posts on here!
Luckily mine was free, but he paid £24 for it!! It's going back....
Personally if you look the hole on the outside is ok, but it tapers inwards and is like the tip of a needle inside, you could easily make it larger with a paperclip or jewellers screwdriver.
Although for £24, you shouldnt have to.
Looks very close to the one I use. However mine's black. It's the poetic palette. I love it
i have the exact same one, the quality is great, it doesnt slip on your hand, very reasonable as well.
Just bought from ebay. Gray one is very nice, I hope the quality is the same as described in the video coz the one i got does not say MEIFENG
You should look at the case mate barely there case. My fav so far.
Sent from my HTC One using xda premium
Definitely feels nice in the hand but for some reason, my ones surface reacted badly to the centre console material in my car or it might have been the air freshner block, and the coating started wrinkling up and coming away.
It's clear plastic underneath so I may just scrape it all away!!!
Reckless187 said:
Definitely feels nice in the hand but for some reason, my ones surface reacted badly to the centre console material in my car or it might have been the air freshner block, and the coating started wrinkling up and coming away.
It's clear plastic underneath so I may just scrape it all away!!!
Click to expand...
Click to collapse
thats bad to hear, but hows the overall thiness or bulk it adds to the phone?
Magpir said:
thats bad to hear, but hows the overall thinness or bulk it adds to the phone?
Click to expand...
Click to collapse
Very good fit otherwise, and quite slim too. No complaints otherwise.
Reckless187 said:
Very good fit otherwise, and quite slim too. No complaints otherwise.
Click to expand...
Click to collapse
do u have more pictures to show thanks
Magpir said:
do u have more pictures to show thanks
Click to expand...
Click to collapse
The first picture in my other post was taken on the HTC One, these ones were taken on the Nexus 4.
The focus on this Nexus 4 sucks ****.
Phone too pretty, I refuse to put a case on it
dassub said:
Phone too pretty, I refuse to put a case on it
Click to expand...
Click to collapse
Agreed lol. I stick a case on it if I'm wearing my Raw Denim jeans. They're like sand paper every time I put my hand in my pocket, they scrape skin off my knuckles so imagine what they'd do to the phone over time.
yeah but i want case which closs ..
What happens when you drop a phone in this type of case, is the front protected?, does the case stay on the phone or just come flying off?.
Thanks
John.
Try this...........http://www.ebay.com/itm/300912737449?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Very sleek and smooth without being too obtrusive. It covers the top and bottom sides as well. Love it so far
sbihue said:
Try this...........
Very sleek and smooth without being too obtrusive. It covers the top and bottom sides as well. Love it so far
Click to expand...
Click to collapse
I purchased that same case. I actually bought a couple of them. I love it!!
Sent from my HTC One using xda premium
I got the clear TPU case loved it bad thing is it's not so clear anymore it's turning yellowish