Hey guys,
So Im fully migrated and with lots of cases to review. Im gonna start the serie with the Cruzerlite androidified. This case is one of my favorite ones (next to the diztronic) Its a perfect match between budget and looks. ITs thin, has the android in the back and gives good protection.
Here it is guys!
http://youtu.be/1RxYErG50A0
i also love this case... fits very snug
i just got mine today, anyone else have the holes slightly off?
Thanks for the video review. The sides look a little flimsy though. I still will probably buy one just because it has Andy the Android on it
RotaryXperiment7 said:
i just got mine today, anyone else have the holes slightly off?
Click to expand...
Click to collapse
Mine are. I think the US Variants are a little thicker than the International models.
ReggieTee said:
Mine are. I think the US Variants are a little thicker than the International models.
Click to expand...
Click to collapse
No. You just need to fiddle with the case until everything lines up. There's a certain way to put on right.
zmore said:
No. You just need to fiddle with the case until everything lines up. There's a certain way to put on right.
Click to expand...
Click to collapse
This.
When i first got mine i thought it didnt quite line up right, but then i figured out how to put it on right.
Dont start with a corner, start at the top or bottom and line up the mic hole. The other end will line itself up.
The fit really is perfect.
kegacide said:
i also love this case... fits very snug
Click to expand...
Click to collapse
yep its super snug , which is a must for me!
faulkton said:
This.
When i first got mine i thought it didnt quite line up right, but then i figured out how to put it on right.
Dont start with a corner, start at the top or bottom and line up the mic hole. The other end will line itself up.
The fit really is perfect.
Click to expand...
Click to collapse
exactly, Its all about moving the case, Remember it is a tpu case therefore u can manipulate it a little bit. Dont get me wrong I thought the same thing, however after playing with it a little, it is just user error until placed correctly
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
taier said:
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
my video is with the tmo version
All Galaxy SIII are exactly the same physically. All cases and accessories ate interchangeable.
Sent from my SAMSUNG-SGH-I747
Btw - if you can't stand to look at the splotchy parts on the back of the translucent cruzerlites where it sticks to the phone, I followed another's recommendation by smearing a tiny bit of baby talcum powder inside the case, and it seems to work.
Maybe this is something cruzerlite could do at the factory? Talcum powder is a 1 on the mohs scale of hardness, so it's not an abrasive.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
zaisaroni said:
All Galaxy SIII are exactly the same physically. All cases and accessories ate interchangeable.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
This!!! And it's actually a very good thing imho
Sent from my SGH-T999 using xda premium
zmore said:
Btw - if you can't stand to look at the splotchy parts on the back of the translucent cruzerlites where it sticks to the phone, I followed another's recommendation by smearing a tiny bit of baby talcum powder inside the case, and it seems to work.
Maybe this is something cruzerlite could do at the factory? Talcum powder is a 1 on the mohs scale of hardness, so it's not an abrasive.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Damn, that's a good idea. I just tossed the cruzerlite to the side and got a speck case. I am going to have to try that. I like switching up cases every couple of weeks.
Pretty nice!
I just got mine today from Amazon.
Initials impressions is that it is quite nice. It fits pretty snug and looks nice on the phone. Especially if you like Andy the android. It is way easier to hold my phone now, especially with the side grips. I much prefer this soft TPU feel than to the hard plastic. There is a nice quality feel to the material.
My only complaint is the same as the users above me mentioned, the splotchy wet look on the back. Easily overcome with the talcum powder suggestion. Thanks zmore! Good looking out :highfive:
Phone is still quite thin after it is on. All in all, good buy, I highly recommend!
Now, back to flashing!
SmokeRob said:
I just got mine today from Amazon.
Initials impressions is that it is quite nice. It fits pretty snug and looks nice on the phone. Especially if you like Andy the android. It is way easier to hold my phone now, especially with the side grips. I much prefer this soft TPU feel than to the hard plastic. There is a nice quality feel to the material.
My only complaint is the same as the users above me mentioned, the splotchy wet look on the back. Easily overcome with the talcum powder suggestion. Thanks zmore! Good looking out :highfive:
Phone is still quite thin after it is on. All in all, good buy, I highly recommend!
Now, back to flashing!
Click to expand...
Click to collapse
do you have any pictures
I had the same problem with the cutouts, but you can move it enough to line them up more or less. The cutouts are so big, they do not feel precision cut at all.
I imagine the talc trick would also make the case easier to move on the phone.
Not great with invisible shields as the case can pull up the edges due to the tight fit.
Overall, great for 10 bucks though.
taier said:
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
you want i9300 not i9100 btw
Droidguy987 said:
do you have any pictures
Click to expand...
Click to collapse
Actually, Amazon has some decent pictures up on their site.
Sorry, I can't post a link since I have so few posts. But if my attachments come through, there are a couple pictures.
Related
Does anyone have any recommendations for a case. I've has 2 Krusell cases, I like them, but they keep cracking. I also had the official one which I didn't really like - felt cheap.
Has anyone any recommendations? I'm thinking of the NGP Semi-Rigid Soft Shell Case. I want to still maintain the thin feel of the phone.
Reviews in accessories section .
jje
Wrong thread but the Otter Box is great. I couldn't live without it.
Sent from my GT-I9100 using XDA App
case-mate barerly there?
If I was you, I would go for the 's line' case from Ebay.
Why? It's cheap, very good build quality, protects the screen also and the most important for feature, grip at both sides.
Sent from my GT-I9100 using XDA App
manmad said:
case-mate barerly there?
Click to expand...
Click to collapse
Mine is starting to crack, fell out my hoodie pocket today about 1ft drop and the case has a crack on it. Also has another crack from when I dropped it at a house party but its barely noticeable.
case mate though, very, very good, i love it, and makes my mind rest, if my phone falls to the ground i will survive
SonicReducer said:
case mate though, very, very good, i love it, and makes my mind rest, if my phone falls to the ground i will survive
Click to expand...
Click to collapse
I was looking at the case mates but they seem to be made of the same material as the Krusell, which cracked twice on me, also the fact that the camera cutout isn't entirely flush would be a bugbear for me.
Went into CPW at lunch to have a look, but they only had 2 cases! Hard to buy these things blind online.
sinkingfish said:
I was looking at the case mates but they seem to be made of the same material as the Krusell, which cracked twice on me, also the fact that the camera cutout isn't entirely flush would be a bugbear for me.
Went into CPW at lunch to have a look, but they only had 2 cases! Hard to buy these things blind online.
Click to expand...
Click to collapse
im using the case-mate tough right now for a few months and i must say that it looks very very strong!
Its a good quality product.
What the **** do you do with your phone that you break so many cases?
My barely there is cracking after 3 weeks. I hope it stops cracking haha
007Arc said:
If I was you, I would go for the 's line' case from Ebay.
Why? It's cheap, very good build quality, protects the screen also and the most important for feature, grip at both sides.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Good shout mate, I have a s line and casemate barely there, use the s line when i'm at work and barely there the rest of the time. both really good quality.
pd81 said:
Good shout mate, I have a s line and casemate barely there, use the s line when i'm at work and barely there the rest of the time. both really good quality.
Click to expand...
Click to collapse
Normally I don't like cases on my phones, but I had to take one also for work so my phone won't get scratched. But because I like the s line so much, I keep it on whole the time
Sent from my GT-I9100 using XDA App
I'm amazed with all the positive comments for such a cheap case. Ordered one on eBay, might still keep an eye out for another though.
Having said that the phone feels so much better without a cover.
Sent from my GT-I9100 using XDA App
Im about to order a case but not sure, ive seen this one but im not sure how long it will last in terms of it getting scratched up.
Here
BlitzyMannna said:
Im about to order a case but not sure, ive seen this one but im not sure how long it will last in terms of it getting scratched up.
Here
Click to expand...
Click to collapse
Too flashy for me... But that's just me. There's also a detailed review around here somwhere about the premium aluminium case that is pretty similar, only matt black. In my opinion that's a lot better suited
Then again, it's just me. If you're wondering about protection, then I suppose it does offer quite a lot of it
In my experience metal casing never feels comfortable in the hands, at least on mine never did. All those edges starts to hurt your hands in long usage :/
Sent from my GT-N7000 using Tapatalk 2
Metal casing can affect signal attenuation. I wouldn't recommend metal.
Sent from my GT-N7000 using xda premium
That case looks awesome, very sexy with the white, kind of reminds me of Real Madrid. I heard the same about metal cases effecting signal though.
I would still consider it if it was available in black or gunmetal for mine.
Sent from my GT-N7000 using XDA
bigboxrate said:
What about this one, especially for Man Utd fans and much cheaper
I will buy this one to change the look of my Note
http://www.tinydeal.com/m-pxq1q7-p-55557.html
Click to expand...
Click to collapse
This looks good !!
BlitzyMannna said:
Im about to order a case but not sure, ive seen this one but im not sure how long it will last in terms of it getting scratched up.
Here
Click to expand...
Click to collapse
I like the look of these bumper cases, but I don't like their size (width/height). I think they don't fit in my pockets.
No way i would put that on my Note its metal connected to the outer polished note metal.. i bet you A month down the road your trim on the note will get damaged...
I've seen a couple threads where people ask whether the Ultra or Neo Hybrids are better for the Nexus.
Well I just got the Ultra Hybrid one and I must say that I love it!!!
I explained it all in this video:
http://www.youtube.com/watch?v=SHjQdA1ueaY
But I just can't say enough how great it feels in the hand and how high quality it really is for a case. I usually never want to spend more than 10 bucks on a case, but if you guys are looking for a high quality case and don't mind spending about 25 bucks with shipping and all that, then I highly recommend this one!
Hope this has helped!
Thanks for making me spend £14!!!
EDIT: Could you also post the pack of screen protectors you use here? Also interested in trying some "good cheap" ones!
yeah i got my soul black one last week, i really like it to, apart from the power button especially it does tend to press with the slightest touch.
Overall very good. and great informative video. subbed
darrendm said:
Thanks for making me spend £14!!!
EDIT: Could you also post the pack of screen protectors you use here? Also interested in trying some "good cheap" ones!
Click to expand...
Click to collapse
here ya go:
http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=350523413940&ssPageName=ADME:L:OC:US:3160
Yeah I love them! And they ship out to you so fast. Took like a day and a half for me. I stopped paying so much money for expensive ones when these work better and feel realistic. Here's my buddy's video on how to apply these types with no bubbles. Mine looks like there's nothing on the screen when I followed these exact instructions. Just use a credit card instead of fingers like he did.
http://www.youtube.com/watch?v=Qhybitbtd-c
IINexusII said:
yeah i got my soul black one last week, i really like it to, apart from the power button especially it does tend to press with the slightest touch.
Overall very good. and great informative video. subbed
Click to expand...
Click to collapse
Thanks man appreciate it! Yeah the non-flushed power button was my only complaint. But it's not too bad once I got used to it.
Think the white portion can get stained by jeans?
ceejay83 said:
Think the white portion can get stained by jeans?
Click to expand...
Click to collapse
No it won't. Its like a hard plastic. Even liquid just slides off of it.
Sent from my Galaxy Nexus using xda premium
Do you know if this would work with the verizon LTE galaxy nexus
.Grizz. said:
Do you know if this would work with the verizon LTE galaxy nexus
Click to expand...
Click to collapse
It kinda does, it just won't be a perfect fit. On the side of the phone, it'll be slightly higher than the brim of the case. That's all.
How sensitive are the buttons? Can you press them accidentally just by casually holding the case?
Does the case edge totally cover the bezel edge? Reason I ask is I'm getting a white nexus, and I want to know if I'll see a little white peeking through or not.
Thanks for pointing out the screen protectors. Picked up a set!
ceejay83 said:
How sensitive are the buttons? Can you press them accidentally just by casually holding the case?
Click to expand...
Click to collapse
No not really, you'd have to squeeze a little. It's easier to press the buttons with this case, but you still have to put a little effort to do so. I got used to it though after a day or two so it doesn't bug me as much as it did on the first day.
ficklecycler said:
Does the case edge totally cover the bezel edge? Reason I ask is I'm getting a white nexus, and I want to know if I'll see a little white peeking through or not.
Thanks for pointing out the screen protectors. Picked up a set!
Click to expand...
Click to collapse
Yeah it totally covers it. The white might be able to peak out a little maybe, but that's about it. And no problem! Let me know how you like the screen protectors, I love them so far!
I just checked out the site. Very nice case to bad its only for the GSM model although I think it would fit the CDMA Gnex.
ddgarcia05 said:
I just checked out the site. Very nice case to bad its only for the GSM model although I think it would fit the CDMA Gnex.
Click to expand...
Click to collapse
It would, the bottom and top of the phone would be under the lip of the case, but the sides wouldn't. It would be a little bit higher. But the screen wouldn't hit the surface if you were to lay it flat since the Nexus is curved.
mackster248 said:
It would, the bottom and top of the phone would be under the lip of the case, but the sides wouldn't. It would be a little bit higher. But the screen wouldn't hit the surface if you were to lay it flat since the Nexus is curved.
Click to expand...
Click to collapse
Have you tried it on a cdma Nexus? It doesn't seem like it would work, since it isn't flexible?
Sent from my Galaxy Nexus using xda premium
T-Keith said:
Have you tried it on a cdma Nexus? It doesn't seem like it would work, since it isn't flexible?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
No, but I've seen it on with the GSM 2000maH extended battery and it fits, but the sides are above the rim a little bit. So I'm just assuming it would sorta fit the CDMA one. But I would really only get this for the GSM if you want a perfect fit.
mackster248 said:
No, but I've seen it on with the GSM 2000maH extended battery and it fits, but the sides are above the rim a little bit. So I'm just assuming it would sorta fit the CDMA one. But I would really only get this for the GSM if you want a perfect fit.
Click to expand...
Click to collapse
Hey mack, this case should be here in the next week or two as it's coming from abroad.
Just wanted to ask how tight the lip/rim is against the screen? I currently use the Diztronic TPU (Rev2) case and the lip is very tight which causes my XO skin to peel in the bottom corner slightly.
darrendm said:
Hey mack, this case should be here in the next week or two as it's coming from abroad.
Just wanted to ask how tight the lip/rim is against the screen? I currently use the Diztronic TPU (Rev2) case and the lip is very tight which causes my XO skin to peel in the bottom corner slightly.
Click to expand...
Click to collapse
The thing about this one is that it doesn't "hug" the rim of the phone. It's raised above it so that if you lay the phone flat it protects it. This is good because like you said, it won't peel or bother your screen protector or whatever you may have on it. So it'll be perfect for you! Let me know how you like it once you get it.
mackster248 said:
The thing about this one is that it doesn't "hug" the rim of the phone. It's raised above it so that if you lay the phone flat it protects it. This is good because like you said, it won't peel or bother your screen protector or whatever you may have on it. So it'll be perfect for you! Let me know how you like it once you get it.
Click to expand...
Click to collapse
Thanks for the reply, looking forward to receive it sometime soon. (14-20 days) from eBay seller Shimshop.
Sent from my Galaxy Nexus
Is the Galaxy S2 HD LTE even a phone in the US? It's not right, just international?
I have an extra SGP Ultra Hybrid case for that phone, don't need it and wanna give it away. But does anyone even have that phone...?
Can anyone recommend this case? I've been searching like mad for the perfect case to fit my requirements, and been having a hard time. I need a case:
Protects phone
Easily removable
Able to slip into/ carry in a side
Leather holster
Must have good grip!
I need good grip as I'm a mechanic
and dirty/greasy hands makes for
more potential dropping. The diztronic case appears to fit my needs, but would appreciate some feedback! Thanks!
Sent from my SGH-T989 using xda app-developers app
md95 said:
Can anyone recommend this case? I've been searching like mad for the perfect case to fit my requirements, and been having a hard time. I need a case:
Protects phone
Easily removable
Able to slip into/ carry in a side
Leather holster
Must have good grip!
I need good grip as I'm a mechanic
and dirty/greasy hands makes for
more potential dropping. The diztronic case appears to fit my needs, but would appreciate some feedback! Thanks!
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I have the diztronic tpu case and i love it. It fits better than any other case i've used for this phone. Slips in and out easily. Doesn't add much to the thickness of the phone. Only recommendation - get it in black. I had it in clear and in smoke, both yellowed in a matter of weeks. I have a black one now and it is awesome! They're pretty cheap too, I got mine on amazon. Think it was like 10 bucks or something...
Sounds good..What about fitting into a side belt holster? Will the case meterial catch too much? I'd like to avoid having to fight getting the phone in and out. Thanks man! For 10 bucks I should prob just try it out lol..
Sent from my SGH-T989 using xda app-developers app
md95 said:
Sounds good..What about fitting into a side belt holster? Will the case meterial catch too much? I'd like to avoid having to fight getting the phone in and out. Thanks man! For 10 bucks I should prob just try it out lol..
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
The case doesn't add much thickness to the phone at all. You can get the case in matte back finish or glossy back finish. I've always gotten the matte finish, because it looks nice, slides easily, but still provides excellent grip. I've read reviews that the glossy finishes attract dust, and I would imagine the glossy finish one would get caught more easily in your belt holster. I would definitely recommend the matte back black case. I doubt you will be disappointed.
I can't post links because i'm still "new member" (i don't really post a lot), but if you search amazon for B005YEFM8M then you will see the case I am talking about. Currently going for $9.90.
Thanks for the info! I went ahead and ordered the matte black case. I'll come back here and review after I get it.
SGH T989 SII JEDI MIND TRICK V6
still waiting on the case..bump for 10th post lol
SGH T989 SII JEDI MIND TRICK V6
I have the clear one, and I like it but it has damaged my phone's frame. I think its because it doesn't fit 100% perfectly so dust accumulated in between the frame and the case, thus scratching the frame.
So just make sure you clean it often.
Sent from my SGH-T989 using xda app-developers app
joshuoner said:
I have the clear one, and I like it but it has damaged my phone's frame. I think its because it doesn't fit 100% perfectly so dust accumulated in between the frame and the case, thus scratching the frame.
So just make sure you clean it often.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yea, same thing happened to mine, but as long as you keep a case on it, you can't even tell.
Got the case today and here are my thoughts: Fit and finish is good. My biggest gripe is the sides. Its fairly easy to move the sides away from the phone, and this is especially noticed when pulling the phone out of the side holster. Not a deal breaker, but something to be aware of.
I was anticipating a bit more grip, but its not bad. For protection, I think it should do the job, although dropping the phone from chest height to concrete is something that concerns me. Hopefully I won't have to find out lol. I need a larger side holster as its a bit too tight, and retrieving the phone should be easier. I'll stick with this case for now, but still open to other options.
I still feel like I need just a tiny bit more bulk and grip, to be perfect.
SHG-T989 SII JEDI V6
Ordered a black case and loving it! Fits very nicely and not too bulky. The customer service is awesome as well. I recommend!
Sent from my SGH-T989D using xda app-developers app
Got mime in the mail today and like it so far
Sent From a Jedi Knight far far away... using Jedi Kernel
Base on the posts here, I ordered the Diztronic and just got mine yesterday from Amazon and it's a **perfect** fit for my TMobile T989. Thanks!
testrider said:
Base on the posts here, I ordered the Diztronic and just got mine yesterday from Amazon and it's a **perfect** fit for my TMobile T989. Thanks!
Click to expand...
Click to collapse
be sure to periodically clean dust from its borders because I think it scuffs the phone otherwise
I'm on a REALLY tight budget, and I've found this:
http://www.amazon.co.uk/Aluminum-Bu...VG/ref=sr_1_67?ie=UTF8&qid=1352551327&sr=8-67
Has somebody tried it before? Do the cover-buttons have a good response (is much more force needed to make them "click")? Any suggestions?
while it might provide a unique look to your phone, i'm not sure how much 'protection' a metal bumper will give.
once that aluminum meets concrete, it'll scratch/dent and it wont look as pretty.
I had an Element Case Vapor AR15-V when it was released for the iP4. I loved the look but it killed my reception..
I don't think/know if the S3 would fall victim to such an issue..
alt0160 said:
while it might provide a unique look to your phone, i'm not sure how much 'protection' a metal bumper will give.
once that aluminum meets concrete, it'll scratch/dent and it wont look as pretty.
I had an Element Case Vapor AR15-V when it was released for the iP4. I loved the look but it killed my reception..
I don't think/know if the S3 would fall victim to such an issue..
Click to expand...
Click to collapse
The aesthetic side of it is of no importance for me. On the reception issue, it was reportedly due to the antenna being linked to a section of the metal frame the iPhones had, so no problem here regarding the S3 i pressume.
Myscha said:
After breaking the front glass of my SGSIII yesterday while wearing a silicone bumper, I'm going to buy a new glass (this one) on Amazon, but I think I need something stronger than silicone or TPU.
The thing is I'm on a REALLY tight budget, and I've found this:
http://www.amazon.co.uk/Aluminum-Bu...VG/ref=sr_1_67?ie=UTF8&qid=1352551327&sr=8-67
Has somebody tried it before? Do the cover-buttons have a good response (is much more force needed to make them "click")? Any suggestions? Please, halp, I don't want to go through the same ordeal again
Click to expand...
Click to collapse
I have one in blue, it works good but is lose just like that so I put pieces of tape to make it tight on the phone n also helps it not scratch the bezel .. all the buttons are accessible with no problems
Sent from my SGH-T999 using xda app-developers app
jorgerangel159 said:
I have one in blue, it works good but is lose just like that so I put pieces of tape to make it tight on the phone n also helps it not scratch the bezel .. all the buttons are accessible with no problems
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I suppose you recommend it?
Edit: I've seen these (http://www.amazon.co.uk/Urban-Armor...3?s=electronics&ie=UTF8&qid=1352595740&sr=1-3) around, and although they seem quite nice, they surpass my budget right now. Any cheaper version of sorts? I think composite could do the trick just as fine.
Does anybody know something similar to the Urban Armor Gear (cheaper and less fancy) that could be of use?
i've always wondered if those slide on thing in the front actually stays on properly or not... I kinda prefer to have the screw on type... i think it's kinda cool.. the only thing I worry about is I don't know if the camera lens would get scratched when i place it on the back.
mputtr said:
i've always wondered if those slide on thing in the front actually stays on properly or not... I kinda prefer to have the screw on type... i think it's kinda cool.. the only thing I worry about is I don't know if the camera lens would get scratched when i place it on the back.
Click to expand...
Click to collapse
The sliding one I'd on there to good lol sometimes I can't even take it off and regarding that it might scratch the screen I haven't had that problem but then again I only use this case one the weekend
Sent from my SGH-T999 using xda app-developers app
mputtr said:
i've always wondered if those slide on thing in the front actually stays on properly or not... I kinda prefer to have the screw on type... i think it's kinda cool.. the only thing I worry about is I don't know if the camera lens would get scratched when i place it on the back.
Click to expand...
Click to collapse
Screw on type? can you post a link to one of those so I can see what it is, please?
they're all expensive.
Draco Design
Sweet Armor s3
and this: http://www.ebay.com/itm/New-Deluxe-...724&pid=100015&prg=1006&rk=1&sd=280995627053&
but it doesn't cover the power and volume button...
mputtr said:
they're all expensive.
Draco Design
Sweet Armor s3
and this: http://www.ebay.com/itm/New-Deluxe-...724&pid=100015&prg=1006&rk=1&sd=280995627053&
but it doesn't cover the power and volume button...
Click to expand...
Click to collapse
That link says it's 13~, but in Amazon UK all Dragon design cases I find are around 70€. Right now I've found this
http://www.amazon.co.uk/Otterbox-Co...1?s=electronics&ie=UTF8&qid=1352662906&sr=1-1
well. the otterbox is not a bumper as well, so that's up to you. i had the commuter for the htc DZ and while it is nice, it also doubled the size of the phone.
and yeah, i didn't say the nicer bumpers were cheap,. i said they were expensive.
Sent from my GT-I9300 using xda app-developers app