Develop Bugs

Connecting USB Flash Drive to Touch

Is it possible to connect a USB Flash Drive to Touch. I want to use USB cable extender to connect the Flash Drive. Does WM6 recognize the USB Flash Drives or not?

it's a little more in depth than a cable, as yet, I have not seen anyone who has figured it out. We are not sure if the drivers for host capability exist, and you will need a speacial cable with all kinds of pulldown resistors and whatnot in order for the device to get power.

no it's the hardware usbchip which dont support it
no work around

Kinda makes me wonder why no one has come up with a small battery powered bluetooth hard drive.. That would be pretty sweet..

Seems like if it was battery powered... it would be dead in five minutes lol

They do make 'em!
http://www.engadget.com/2007/01/30/seagate-unveils-d-a-v-e-drive-with-bluetooth-and-wifi/

Audi2Audi said:
They do make 'em!
http://www.engadget.com/2007/01/30/seagate-unveils-d-a-v-e-drive-with-bluetooth-and-wifi/
Click to expand...
Click to collapse
I spoke to Seagate apparently they will only be selling this through the OEM channel. not directly to consumers. So I don't who would carry this and if we can buy it.
But they go upto 60GB.
Anyone knows where we can get it?
http://www.seagate.com/www/en-us/products/consumer_electronics/DAVE/

a harddrive no but a flash drive should be perfectly within the usb spec this phone is built to it would just be a matter of proper drivers which probably are out their considering their are printer drivers which are much more compicated and no resistors would be required usb is a serial bidirectional interface not like cat5 their is no hardware crossover or anything required

SultanH said:
I spoke to Seagate apparently they will only be selling this through the OEM channel. not directly to consumers. So I don't who would carry this and if we can buy it.
But they go upto 60GB.
Anyone knows where we can get it?
http://www.seagate.com/www/en-us/products/consumer_electronics/DAVE/
Click to expand...
Click to collapse
Is there a way of accessing media files from your pc via internet and to access and use only needed files on my pda. It has to be the internet because the phone does not have wi-fi. I have a Sprint Touch. Storage has ultimatly been my problem. The bluetooth hdd sounded pretty good for my use but its not available. thanks... noob

cdred said:
Is there a way of accessing media files from your pc via internet and to access and use only needed files on my pda. It has to be the internet because the phone does not have wi-fi. I have a Sprint Touch. Storage has ultimatly been my problem. The bluetooth hdd sounded pretty good for my use but its not available. thanks... noob
Click to expand...
Click to collapse
I assume from your explanation that you are trying to use this when you are home? I would just use the Bluetooth FTP or Bluetooth browser and access the PC that way instead of using airtime.
If you want to use it while you are out then there is a device called Slingbox try googling that.
Good luck.

Rudegar said:
no it's the hardware usbchip which dont support it
no work around
Click to expand...
Click to collapse
I call bull**** on that one!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The MSM 7500 is the chip found in the Vogue...check out connectivity...it lists the port as USB OTG.... short for USB on the Go....which means it has limited hosting capabilities.
Even though Windows does support USB OTG Mass Storage, the problem is that the Vogue is not transmitting enough power via the USB port, which according to USB OTG regulations is OK. Which means you have to use specific selfpowered USB devices (most likely labeled as USB OTG compatible), or provide the power by yourself (splicing cable and adding correct AC adapter...).

HTC DOck
how 'bout this one:
http://www.expansys.com/htc/p_htc_item.aspx?i=145164
kinda big, and I think but here's the info:
Description
Keep the HTC Advantage at hand on a desk and at an ideal viewing angle. The docking station extends the peripheral connectivty of the Advantage and includes:
- A/V interface: VGA (15pin) port, Video out port, S-Video (4 pin) port, 3.5mm audio jack
- Charging & syncing interface: miniUSB port for power charging and synchronization, 2 x USB standard A female port (USB Host), 2nd battery charging slot
- LEDs indicators – 2nd battery, power & sync
Technical Details
(none available)
I'm experimenting with a powered USB Hub... who knows...

I want to buy an HTC Diamond and if it's possible I would use the mini usb port in it like a "host"...so (from the bottom of my lack of knowledge) I'll try to help this "project"...
If I'm not wrong USB On-The-Go is just a "chipset protocol", a feature of its and no more...the only two hdw thinks that a device must have to use it is
1) an AB type port usb (or mini usb as most pdas)
2) a circuit scheme that is able to send 5v to the pin of the port used during the "host mode"
Moreover, on the sfw side, it's necessary to have drivers that recognize and organize the host function of the port...
It's all right?
If I centered the situation I think that the only problem is the lack of 5v power to send to the pin, that's right?
In this case...why don't look (and copy) this?
Then, about the drivers matter, i think is sufficient a look to the others (a few I know) WM devices that already have a native usb host functionality...
I'm sorry if I said a lot of stupid thinks but I said before I just tried to gave an help.
PS: sorry for my english too and (because of this is my first message) Hi all!!!

cdred said:
Is there a way of accessing media files from your pc via internet and to access and use only needed files on my pda. It has to be the internet because the phone does not have wi-fi. I have a Sprint Touch. Storage has ultimatly been my problem. The bluetooth hdd sounded pretty good for my use but its not available. thanks... noob
Click to expand...
Click to collapse
www.orb.com will do what you want...you don't need a tv tuner to make use of its other capabilities.

Ok, as a lot of you maybe still know NEO1973 will have a USB host functionallity...
Infact it has a USB otg port and it will selled with this option already included.
About that I've found this page: a complete explaination to activate the host function of the port...it could be of any help?
http://wiki.openmoko.org/wiki/Neo1973_USB_host

2 quick points:
@dave68 - all of the pieces needed to make a USB flash drive work with the Toshiba E804 PPC (WM2003) already exist - including drivers. All I had to do to make that device work with USB Flash drive and USB HDD was use a powered hub with the WM2003 drivers installed.
@cdred - As already mentioned www.orb.com is one way to go. You will need a PC running the Orb software at home and a way to get to it (i.e. dyndns.org).
The Slingbox is another way to achieve this, or IMHO, the Buffalo LinkStation is a good choice.
Scruffy

[Q] connection issues

i have a htc touch pro 2 and before i could connect it to computer. now when i try to it tells me instantly that the device cannot be recognized by microsoft on my cpu. i have a toshiba satellite l555 running windows 7. also while i try chrging it it takes forever and if the phone is on it says that my computer doesnt supply enough power to charge it. also says the same thing when its connected to my xbox 360. i just would appreciate any help.

noob91 said:
i have a htc touch pro 2 and before i could connect it to computer. now when i try to it tells me instantly that the device cannot be recognized by microsoft on my cpu. i have a toshiba satellite l555 running windows 7. also while i try chrging it it takes forever and if the phone is on it says that my computer doesnt supply enough power to charge it. also says the same thing when its connected to my xbox 360. i just would appreciate any help.
Click to expand...
Click to collapse
Have you tried a different cable? Sounds like you've tried a different port, considering you plugged it into your 360...
Your USB port might be dying/dead....

I have not tried a different cable yet. I was thinking about gettin one from amazon to try. I hope it's just the cable.

noob91 said:
I have not tried a different cable yet. I was thinking about gettin one from amazon to try. I hope it's just the cable.
Click to expand...
Click to collapse
If you have a PS3, some cameras, etc use the exact same plug. Anything mini-USB - even tho it doesn't look like it matches up, it'll work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I know, doesn't look like the plug will fit - it will!!

Mine don't look like that. It looks like this.

noob91 said:
Mine don't look like that. It looks like this.
Click to expand...
Click to collapse
Yes, I know. I was trying to coax you into using other cables that are around your house that have this similar plug. The 'default' HTC cable looks like the one you posted, but I wanted you to be aware that other cables will work just fine - like the miniUSB standard cable I posted above!!

Oh ok. Well I guess I could try a few. See what happens.

I have the same problem with my TP2.
Tried different cables, different computers, but problem is still there.
I can't connect TP2 with computer, can't sync with Outlook, at least I can flash ROM from mSD card
Any ideas, solutions, maybe there's some fix for this issue?!

MarkoFaca said:
I have the same problem with my TP2.
Tried different cables, different computers, but problem is still there.
I can't connect TP2 with computer, can't sync with Outlook, at least I can flash ROM from mSD card
Any ideas, solutions, maybe there's some fix for this issue?!
Click to expand...
Click to collapse
Has it ever worked? Perhaps it's a hardware issue with the plug. I assume it charges OK?

^ Yes, it worked well in the past. Charging is OK, wiht AC adapter and with USB cable connected to computer. Only ActiveSync doesn't work.

noob91 said:
i have a htc touch pro 2 and before i could connect it to computer. now when i try to it tells me instantly that the device cannot be recognized by microsoft on my cpu. i have a toshiba satellite l555 running windows 7. also while i try chrging it it takes forever and if the phone is on it says that my computer doesnt supply enough power to charge it. also says the same thing when its connected to my xbox 360. i just would appreciate any help.
Click to expand...
Click to collapse
MarkoFaca said:
I have the same problem with my TP2.
Tried different cables, different computers, but problem is still there.
I can't connect TP2 with computer, can't sync with Outlook, at least I can flash ROM from mSD card
Any ideas, solutions, maybe there's some fix for this issue?!
Click to expand...
Click to collapse
Have you guys tried Deleting any/all Partnerships and then uninstalling and reinstalling Windows Mobile Device Center on your PC and then trying again?

Yes
I even reinstaled the system, Win7, WinXP, changed cables, changed computers, even changed ROMs (Energy, Jackos...), still nothing
Weird thing is that charging works just fine, but sync don't...?

I suspect you have a hardware problem with the port on your device. Maybe use a magnifying glass and look at the brass pins inside the port and see if you see any bent or missing pins. You could have two pins touching that could be shorting. Maybe the only solution is repair/replacement.

mr.horndoctor said:
I suspect you have a hardware problem with the port on your device. Maybe use a magnifying glass and look at the brass pins inside the port and see if you see any bent or missing pins. You could have two pins touching that could be shorting. Maybe the only solution is repair/replacement.
Click to expand...
Click to collapse
I'd say that is your best bet. It's entirely possible that the pins for charging (only 2) are fine, while the remainder (I think there's a total of 11?) or a portion of the remainder of the pins are messed up...
Good luck!

arrrghhh said:
I'd say that is your best bet. It's entirely possible that the pins for charging (only 2) are fine, while the remainder (I think there's a total of 11?) or a portion of the remainder of the pins are messed up...
Click to expand...
Click to collapse
I tried with MG, but everything seems to be OK, all pins are there
Oh well, at least it's not the other way around - I can sync but I can't charge

MarkoFaca said:
I tried with MG, but everything seems to be OK, all pins are there
Oh well, at least it's not the other way around - I can sync but I can't charge
Click to expand...
Click to collapse
Try to turn the high speed network thingy off, in your USB connection on your phone. I forgot what it is exactly called but something of that sort.

ccengineer said:
Try to turn the high speed network thingy off, in your USB connection on your phone. I forgot what it is exactly called but something of that sort.
Click to expand...
Click to collapse
Oh, good thinking!
Yeah, try going into Settings and uncheck the box that says Enable Faster Connections. It's in Activesync or USB to PC settings.

Sorry, guys, but I tried that first: Start > Settings > Connections > USB to PC, uncheked the box "Enable faster data syncronization", still nothing

MarkoFaca said:
Sorry, guys, but I tried that first: Start > Settings > Connections > USB to PC, uncheked the box "Enable faster data syncronization", still nothing
Click to expand...
Click to collapse
When you connect your phone to the computer, does it even recognize it, I mean does your computer detect that something got connected to the usb? Were you always plugging it in to the same USB port on your computer?

I HAD the same problem-charging was ok, but no sync. Well...
First of all, check your cables (my TP2 won't work with cables from my old TYTN II). Use cables for particular model, those contacts can be tricky. Now, in your phone's USB to PC settings uncheck "enable faster data sync". It worked for me. Now phone syncs, no problem. When pc starts recognizing your new device, phone will use 3g connection to download some 11MB of drivers, so you must have some credits in order to connect to 3g. Now it works like a charm, no problems whatsoever...
If your PC recognizes the device, but doesn't sync, try this: when connected go to your PHONE's active sync and sync it from there. Worked with me once I had that "issue"...

2017 SieldTV

I just received it today went through the initial setup and restarted it, I am now getting the Connecting to Google...message for 1 hour. I have tired using LAN and Wireless resetting several times and no success.
Now the bad news is, no way to get into fastboot on this device using the hold the power button down, since the new version doesn't have a micro-usb port nor a power button.

docangle said:
I just received it today went through the initial setup and restarted it, I am now getting the Connecting to Google...message for 1 hour. I have tired using LAN and Wireless resetting several times and no success.
Now the bad news is, no way to get into fastboot on this device using the hold the power button down, since the new version doesn't have a micro-usb port nor a power button.
Click to expand...
Click to collapse
to get into fastboot you have to use the usb port farthest away from hdmi port. with usb 3 male to male cable.

brandonb21 said:
to get into fastboot you have to use the usb port farthest away from hdmi port. with usb 3 male to male cable.
Click to expand...
Click to collapse
I have a USB-A to USB-C Cable. I tried it in both ports, but still can't figure out how to get into fastboot without a power button. When I connect to PC, I am not prompted for drivers.

docangle said:
I have a USB-A to USB-C Cable. I tried it in both ports, but still can't figure out how to get into fastboot without a power button. When I connect to PC, I am not prompted for drivers.
Click to expand...
Click to collapse
did you enable USB transfer on the shield, if not, its under storage in settings menu.

brandonb21 said:
did you enable USB transfer on the shield, if not, its under storage in settings menu.
Click to expand...
Click to collapse
as i stated above, l haven't been able to get past the Connecting to Google message, which is the reason i am trying to reset the unit via bootmenu/fastboot.
I purchased two units and the other one is working fine, but the remote is no longer fast scrolling after it did a firmware update(another words when i try to scroll through my apps list on the main screen I have to keep pressing the right part of the remote repeatedly instead of holding it down. it also highlights the current position in green, it didn't do this before the update.

I get it today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Do you have another Android Phablet? Yeah I guess someone had to throw it out there. 'Cause it sounds to me like its (i.e. the Shield), is waiting on some 2FA from a Phablet, PC, Note/Net-book to port your otherwise current Google Account over to the Shield.
So barring the rest of it. Do you even have a Google Account? Again I can only assume that some People have a more fruity lifestyle than others. So please don't take to much offence at this.
'Cause on just on the off chance that you don't.... This will almost certainly be your problem. I can't really, say that I have fully as such exhausted every option in that setup mode. As it was clearly, setup to be paired though a Phablet. Which I have, and am using to post this very Message. So it's a bit of a non starter, for me.

Ichijoe said:
Do you have another Android Phablet? Yeah I guess someone had to throw it out there. 'Cause it sounds to me like its (i.e. the Shield), is waiting on some 2FA from a Phablet, PC, Note/Net-book to port your otherwise current Google Account over to the Shield.
So barring the rest of it. Do you even have a Google Account? Again I can only assume that some People have a more fruity lifestyle than others. So please don't take to much offence at this.
'Cause on just on the off chance that you don't.... This will almost certainly be your problem. I can't really, say that I have fully as such exhausted every option in that setup mode. As it was clearly, setup to be paired though a Phablet. Which I have, and am using to post this very Message. So it's a bit of a non starter, for me.
Click to expand...
Click to collapse
I did use my Nexus 6P to set up the Nvidia Shield. It completed, told me I had a firmware update at which point I clicked the install and restart button. Update installed and restarted again, at which point I got the Connecting to Google.. message.
I just managed to fix it! I decided to change the language (since that was one of the few things I could do.) It gave me a weird message, and proceeded with the startup. I have to figure out how to change the language back to English, but once I did it is working normal.

Can't connect my black shark 3 to laptop

My black shark 3 only charges when connected to laptop. There is no pop up to connect it to laptop please help

I'm having the same problem. it used to be fine and then all the sudden, it doesn't connect to the pc anymore.

Good afternoon!
I am from Brazil and I have the same problem unfortunately and without a solution so far and I believe it is a physical defect ....
Before I suspected that the last security update of the month 12/2020 could have caused this but seeing this topic there are people with this problem since 09/2020, that is before the android security update ...
I follow the topic to see if someone gives a light because mine is the same way I connect on the PC with his original usb cable and the device just keeps charging and does not open the menu to select the data transfer mode and even if I go to "Developer options" and enter usb settings and leave selected data transfer, nothing happens unfortunately it just keeps charging and doesn’t connect with the computer.
I did tests with other usb cables and nothing and also tried to connect to a Macbook Air and the same thing the device only charges and nothing else.
Detail the OTG function of it works normally because I connected an OTG adapter with a pen drive and recognized it normally in the cell phone and became the only way to transfer his data to a pc using the otg adapter and a pen drive for this solution.

try closing google chrome on your laptop , then connecting your phone.

Lizzo said:
try closing google chrome on your laptop , then connecting your phone.
Click to expand...
Click to collapse
Good afternoon Lizzo !!
Boy, I thank you for the tip, but I've done it here and nothing ...
In fact I've tried I believe that everything ...
I have already restored the device and nothing to recognize on the PC.
I entered recovery connected to the pc and nothing to recognize.
I plugged in 2 different pcs and a notebook nothing.
I plugged in a 2011 Macbook air and nothing to recognize.
I plugged in normal USB 2.0 and 3.0 also nothing to recognize.
I called the multimedia in my car that mirrors the image of the cell phone and also nothing to recognize the cell phone.
Anyway it only charges when connected to any USB and the OTG function normally works because I connect a samsung adapter that I have and a pen drive and it recognizes normally ....
In other words, unfortunately a device of 400 USD that presents an idiotic defect like that of not connecting to the pc unfortunately ....
Even so I thank you for the tip and I'll keep an eye out to see if anyone else gives a tip.
Thank you all.

I have been thinking that I had the same problem, so I contacted the customer support and they told me to do this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello
Enable dev mode by click 5 times in setting-about your phone, and search usb configuration in the sear bar, find default usb configuration and choose file transfile.
I tried it and it didn't work, so I tried everything I could think of and connected the phone to an old windows computer (I was using apple computers) and it worked, it seems that Mac os doesn't detect the phone while windows ones do.
So if you guys are trying with Mac os, maybe you had the same problem.

Question Is there a method to re-implement ethernet thetering on realme UI 2.0?

Hello,
is there a method that i could connect my usb-c over ethernet adapter to my pc from the phone allowing it to share internet from it?
I know the option ethernet over thetering was implemented in stock Android 11 rom but why was it removed from realme UI i don't understand (correct me if i'm wrong)
The order it's Phone Tethering --> Usb-c to ethernet adapter --> Windows System
And will this function be implemented in realmeUI 3.0? because that option remained also in OneUI 4.0 (samsung).
Hope for an answer.
Regards.
- EarlyGamer45

EarlyGamer45 said:
Hello,
is there a method that i could connect my usb-c over ethernet adapter to my pc from the phone allowing it to share internet from it?
I know the option ethernet over thetering was implemented in stock Android 11 rom but why was it removed from realme UI i don't understand (correct me if i'm wrong)
The order it's Phone Tethering --> Usb-c to ethernet adapter --> Windows System
And will this function be implemented in realmeUI 3.0? because that option remained also in OneUI 4.0 (samsung).
Hope for an answer.
Regards.
- EarlyGamer45
Click to expand...
Click to collapse
its not removed you can find it under usb tethering

Where?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

EarlyGamer45 said:
Where?
View attachment 5561055
Click to expand...
Click to collapse
there ^^;

Hello,
I mean ethernet tethering option, it's like sharing internet access via ethernet adapter. I know that option it's on Samsung and Android stock devices.

EarlyGamer45 said:
Hello,
I mean ethernet tethering option, it's like sharing internet access via ethernet adapter. I know that option it's on Samsung and Android stock devices.
Click to expand...
Click to collapse
thats it its the same option im tethering from my phone to my adapter for my kids ^^;
but you need to use the cable

Ok I already tried that.
I connected the adapter to my phone into my pc then the adapter turns on in OTG but the usb tethering doesn't light up.

EarlyGamer45 said:
Ok I already tried that.
I connected the adapter to my phone into my pc then the adapter turns on in OTG but the usb tethering doesn't light up.
Click to expand...
Click to collapse
you cant use it if you chose transfer file you must chose charge only to use it ^^ like this ^^

I know but when I plug the adapter in power mode the usb tethering option isn't lighted up. Otg is required to at least power on the adapter.. I don't know

EarlyGamer45 said:
I know but when I plug the adapter in power mode the usb tethering option isn't lighted up. Otg is required to at least power on the adapter.. I don't know
Click to expand...
Click to collapse
maybe you need another cable to work other then the one that your using i used the cable that came with the phone and it works with me

maybe you don't understand, i wanted to connect my phone with RJ45 adapter to my pc not use an usb to connect my pc via tethering https://www.google.com/search?q=rj4...&biw=1920&bih=904&dpr=1#imgrc=SVBP8DUya15ZzMi
i could try using the rj45 adapter connected to the pc and then using a usb dongle to connect the normal cable to ethernet, i only wanted to use wired hotspot without charging the battery because keeping it forever at 100% it's not that good.

EarlyGamer45 said:
maybe you don't understand, i wanted to connect my phone with RJ45 adapter to my pc not use an usb to connect my pc via tethering https://www.google.com/search?q=rj4...&biw=1920&bih=904&dpr=1#imgrc=SVBP8DUya15ZzMi
i could try using the rj45 adapter connected to the pc and then using a usb dongle to connect the normal cable to ethernet, i only wanted to use wired hotspot without charging the battery because keeping it forever at 100% it's not that good.
Click to expand...
Click to collapse
i dont think you can do it this way ^^;

bruh it's strange that only ColorOS removed this option...
so i can close the discussion now.
the screen is from stock android 11

EarlyGamer45 said:
bruh it's strange that only ColorOS removed this option...
so i can close the discussion now.
the screen is from stock android 11
Click to expand...
Click to collapse
yeap