Related
Hi
Yesterday i was trying to flash JPC to My Galaxy
After finishing flashing mine and i saw long time my screen showing Logo of
((S..Samsung Galaxy)) and it is showing like i have to wait but realy nothing is comming and it is vibrating somtimes
i was trying handreds time to open Download Mode but i cant!!
I press all three but nothing ,,i pull the battery but still nothing!!
In fact i flash my Galaxy many roms before but this problem first time happened!!!
Any Idea??
Wipe data. This should fix it
Try to boot in recovery (vol up, home and power) then wipe data.
jim_panse said:
Wipe data. This should fix it
Click to expand...
Click to collapse
Even recovery mode i could not open it!!!
NO recovery mode,No download Mode!
Gh0stw4lk3r said:
Try to boot in recovery (vol up, home and power) then wipe data.
Click to expand...
Click to collapse
ummmmmmmm
No way i tried before!!
I think i have to start giving sweet for all my kids!!
did you try rebooting to recovery via adb?
g00ndu said:
did you try rebooting to recovery via adb?
Click to expand...
Click to collapse
I tried also!!!
Recovery mode as I always enter it:
Hold vol up + home + power for 5 seconds.
For some people it seems quite hard to understand how to get their phones in recovery mode. Don't know or you are one of them, but just give it a try
japperrrr said:
Recovery mode as I always enter it:
Hold vol up + home + power for 5 seconds.
For some people it seems quite hard to understand how to get their phones in recovery mode. Don't know or you are one of them, but just give it a try
Click to expand...
Click to collapse
I have done small trick and its working fine..Flashing Back to 2.1
THANKX FOR ALL
alfrqan said:
I have done small trick and its working fine..Flashing Back to 2.1
THANKX FOR ALL
Click to expand...
Click to collapse
Don't forget to restore your product code!
I flashed JPC using kies and back to JM5 using Odin and everything works fine. What is the need for changing the product code? Maybe it's location specific? I am in India.
Sent from my GT-I9000 using XDA App
When you flashed to JPC the registry hack for Kies changed your product code. Now it's I9000xxxKOR or something like that, where KOR should be something else depending on where you bought your phone. You can find instructions at the bottom of the startpost from the announcement of JM7.
Hi, I'm trying to flash Clockworkmod using this method.
http://forum.xda-developers.com/showthread.php?t=1446593&highlight=clockworkmod+recovery&page=10
But now I don't seem to be able to get it to go into recovery mode at all any more.
I hold down up home and pwer and it gets to the screen with the picture of the android and the box with the arrow coming out of it. But then it just seems to reboot.
The phone still works other than that.
Is there a knack to getting it into recovery mode thaqt I just haven't got?
Ok I've managed to get it into recovery (but only once- there's clearly a knack to it I'm missing)
But the problem now is that it's still the stock recovery.
My phone is rooted and debugging is on.
any ideas (on either)
u use adb to flash? if that didnt work y not try to flash using odin v4.43?
vanir29 said:
u use adb to flash? if that didnt work y not try to flash using odin v4.43?
Click to expand...
Click to collapse
That worked thanks
tmcthree said:
Ok I've managed to get it into recovery (but only once- there's clearly a knack to it I'm missing)
But the problem now is that it's still the stock recovery.
My phone is rooted and debugging is on.
any ideas (on either)
Click to expand...
Click to collapse
I seem to have the same problem, did you figure out how to go in recovery without getting reboot right after you press the menu button?
EDIT: I might have been pressing buttons in the wrong order or too long/short. As soon as I see samsung logo I released power button and I holded menu button a bit longer. I'm not sure about the last one tried again with a short press and it worked as well, I think the most important thing here is when to release power button.
tmcthree said:
Hi, I'm trying to flash Clockworkmod using this method.
http://forum.xda-developers.com/showthread.php?t=1446593&highlight=clockworkmod+recovery&page=10
But now I don't seem to be able to get it to go into recovery mode at all any more.
I hold down up home and pwer and it gets to the screen with the picture of the android and the box with the arrow coming out of it. But then it just seems to reboot.
The phone still works other than that.
Is there a knack to getting it into recovery mode thaqt I just haven't got?
Click to expand...
Click to collapse
is it using odin method?
OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?
OK, flashed twrp via odin, see pics.
brisk5181 said:
OK, trying to install CM10.2, which requires TWRP 2.6.3.0. So I installed GooManager from play store and updated to 2.6.3.0, now my phone won't boot, black screen after the samsung logo. It won't boot to system, won't boot to recovery.
I have usb jig, so I can go to download mode.
So how do i fix this?
Click to expand...
Click to collapse
Oh man. You're not the only one.
This happened to me yesterday. I had to flash back to stock. Now, I am about to root again. Good luck, mate.
This seems to happen with Goo everytime there's a new version of TWRP. I have read that the easiest fix is to flash the TWRP tar file with Odin. Every post I have read, said that everything was fine after that. Sounds like Goo doesn't mess with anything but the recovery in those cases. I used this fix once when I flashed a recovery zip that didn't work.
As of date. It appears Goomanager is the culprit.
I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?
tthreeoh said:
I installed openrecovery-twrp-2.6.3.0-hercules.tar using odin since goo obviously doesn't work... but I can't seem to boot past the teamwin screen... any pointers?
Click to expand...
Click to collapse
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Can I install 4.3 with twrp2.6.1.0 recovery?
I installed 2.6.1.0 and I still can't get past teamwin...
Soft Bricked
tthreeoh said:
I installed 2.6.1.0 and I still can't get past teamwin...
Click to expand...
Click to collapse
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse
brisk5181 said:
if you cannot go to download mode, you need USB Jig, check it here:
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
Use USB jig to get into download, then follow the 2 photos I pasted at the 1st post to Odin 2.6.1.0
Click to expand...
Click to collapse
I appreciate, There's so many on Amazon, how do I know which one is correct ?
VermontKindBud said:
I appreciate, There's so many on Amazon, how do I know which one is correct ?
Click to expand...
Click to collapse
any should work.
this is what I bought
http://www.diygadget.com/samsung-galaxy-s-i9000-s2-i9100-download-mode-usb-jig.html
VermontKindBud said:
GooManager updated me to 2.6.3.0, now when I reboot, I see Samsung splash screen for a few seconds and then a black screen of death, won't boot, won't go into download mode no matter what I do. tried rebooting with both vol keys pressed down, tried holding vol keys down while inserting usb cable, tried rebooting while holding the down volume key, tried rebooting holding vol keys and power then releasing power. Nothing works. If anyone can help me get into downlaod mode, I'd appreciate. From there, I can revert back to 2.6.1.0
Click to expand...
Click to collapse
In case you missed it. You have to remove the battery. (it would be nice if this helps your problem)
soupysoup said:
That's u are because u are softbricked buddy, twrp2.6.0.3 is a bad file, nobody can boot past slpash screen, u need to Odin twrp v2.6.1.0 and itll work fine, u can find the tar file here techerrata.com/browse/twrp2/hercules
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks man... Got me out-of hat water with the wife. .
You guys are life savers! Thank you!!!!
Jig not working either
So, as mentioned before, GooManager updated me to TWRP 2.6.3.0, and now I can't boot past samsung splash screen. No method I used would get me to download mode so I took the advice in the thread and bought a USB Jig. Even removing the battery and leaving it out for 2 minutes and then reinserting it, followed by inserting the jig in the charger port and waiting, and nothing happens. Turning the device on with the jig in the port also does nothing but a quick flash of the splash screen logo and then darkness forever. Definitely doesn't bring up download mode or any kind of yellow triangle. Anyone tell me what I'm doing wrong? You'd think that as long as I can get to the samsung logo screen that there would be some way to recover this device and that I'm no hard bricked. Other people have managed to recover from the GooManger TWRP 2.6.3.0 issue, so why can't I?
shot my USB jig came in today & can't get it into to download mode at all NO
gata love odin it saves you every time
Greetings XDA Developers,
Newbie here. I own a Samsung Galaxy Tab S (SM T705). I was able to root it a few weeks ago and I decided to install a custom recovery (TWRP) using an app from the Playstore named "TWRP Manager". I didn't hesitate to do so using this method because I was able to install TWRP on my GT I9300 successfully from the past using this app. However, after being prompted by the app that the recovery was successfully installed and needs to reboot the device, my tab was stuck on start up screen ( See attached photo ). I tried long pressing the power button but nothing happened. I waited until the device ran out of battery and when it did, I plugged in the charger and I'm back at the same screen. After google-ing some possible solutions, I tried to boot it into recovery but was unsuccessful, however, I was able to boot into download mode.
I'd like to ask for the help of some "experienced" users in this forum on how to solve this problem. And if possible, I'm hoping that flashing a stock recovery using Odin wouldn't be my last resort.
Thank you in advance.
paul952102 said:
Greetings XDA Developers,
Newbie here. I own a Samsung Galaxy Tab S (SM T705). I was able to root it a few weeks ago and I decided to install a custom recovery (TWRP) using an app from the Playstore named "TWRP Manager". I didn't hesitate to do so using this method because I was able to install TWRP on my GT I9300 successfully from the past using this app. However, after being prompted by the app that the recovery was successfully installed and needs to reboot the device, my tab was stuck on start up screen ( See attached photo ). I tried long pressing the power button but nothing happened. I waited until the device ran out of battery and when it did, I plugged in the charger and I'm back at the same screen. After google-ing some possible solutions, I tried to boot it into recovery but was unsuccessful, however, I was able to boot into download mode.
I'd like to ask for the help of some "experienced" users in this forum on how to solve this problem. And if possible, I'm hoping that flashing a stock recovery using Odin wouldn't be my last resort.
Thank you in advance.
Click to expand...
Click to collapse
Your going to need some fast hands for this one! I've ran into this lots of times when testing kernels and such. Any force reboot by holding Power Button+ Home Button + BOTH Volume buttons all at the same time. Press and hold that combo until the screen goes black. Then once the screen goes black quickly press and hold Power Button+ Home Button + Volume down buttons all at the same time. You should no enter into download mode. You said that you drained the battery so I would suggest charging it in download mode for 30 minutes or so then flash TWRP with Odin.
Your going to need to flash stock recovery or TWRP with Odin to override the boot and get it working
The TWRP app doesn't always work in which is why I use Odin.
Sent from my SM-T800 using Tapatalk
As a side note for future reference, hard reset is simply hold POWER + VOL DOWN.
As said all you need do is boot to download mode and flash recovery.
If you're on lollipop you may need to immediately boot into recovery after flashing to make it stick.
ashyx said:
As a side note for future reference, hard reset is simply hold POWER + VOL DOWN.
As said all you need do is boot to download mode and flash recovery.
If you're on lollipop you may need to immediately boot into recovery after flashing to make it stick.
Click to expand...
Click to collapse
Hey, thanks for the heads up. But how exactly do I "immediately boot into recovery after flashing to make it stick." Since after I flash recovery via odin, it would obviously automatically reboot my device? sorry for the dumb question.
DUHAsianSKILLZ said:
Your going to need some fast hands for this one! I've ran into this lots of times when testing kernels and such. Any force reboot by holding Power Button+ Home Button + BOTH Volume buttons all at the same time. Press and hold that combo until the screen goes black. Then once the screen goes black quickly press and hold Power Button+ Home Button + Volume down buttons all at the same time. You should no enter into download mode. You said that you drained the battery so I would suggest charging it in download mode for 30 minutes or so then flash TWRP with Odin.
Your going to need to flash stock recovery or TWRP with Odin to override the boot and get it working
The TWRP app doesn't always work in which is why I use Odin.
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
paul952102 said:
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
Click to expand...
Click to collapse
Both are the same I think. Some people name it by our product name or device name (one has xx and one doesn't. Both are the same)
Sent from my SM-T800 using Tapatalk
paul952102 said:
Hey, thanks for the heads up. But how exactly do I "immediately boot into recovery after flashing to make it stick." Since after I flash recovery via odin, it would obviously automatically reboot my device? sorry for the dumb question.
Click to expand...
Click to collapse
You either be quick and hold POWER + HOME + VOL UP as soon as it reboots or you uncheck auto reboot in Odin then restart manually.
paul952102 said:
Thank you for the solution mentioned above! However, just to further clarify things, what is the difference between "klimtwifi and klimtwifixx" ?
Click to expand...
Click to collapse
So did the solution work? I am looking at a SM-T705 on ebay being sold for parts with similar symptoms. hoping I can fix it for a great bargain.
Lineage /Oreo was installed thru TWRP 3.xxx, running fine but unhappy , no Viper4Android , so I installed it as a module on Magisk,
after installing the driver, was ask to reboot as directed, but went into bootloop , stuck on a boot loop " Set Warranty Bit : kernel " top left corner and Samsung Galaxy Note 3 on screen ; I tried Vol Up +Home+ power combo and all other combi I could think but no luck , Odin wont recognize my phone, tried Samsung 300k tool with no luck, I fell like a newbie after using so many ROMs on all of my devices, I google how to get back to download mode but no luck, I need help to make my Samsung note 3 work again, PLEASE. THANKS.
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
AndroidHacker99 said:
Hi,
I have same phone but I'm running Resurrection Remix 6 which is based on LineageOS 15.1 and I'm able to use the Viper module through Magisk 16.3 without any problems. No bootloops, no nothing.
I never would have guessed that a sound mod could brick the device to the point that the buttons no longer function. Hopefully other users will chime in and help you fix it.
Best of luck.
EDIT: Try taking the battery out to force it to shut down and then try the recovery/download mode technique again. Sometimes, it'll end up in a bootloop and the buttons will be become unresponsive. I know it may seem a bit strange, but that scenario is entirely possible given the age of the device.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Isn't download mode volume down + home + power?
Aykee said:
I did tried RR 6, but I had trouble with 1.) power Button menu option, screenshot/screen record , 2.) Viper4Android , a must have on all my Android devices, and last 3.) latest Android version , if I dont get the first 2 obsession , that's when I switched to a different ROM (LOL), but seriously , all I need is to get HELP to get back to download mode again, Vol Up + Home + Power, did that for 2 days approaching the 3rd day (LOL). HEEEELLLLLPPPPPPP.
Click to expand...
Click to collapse
You need to take the battery out to force it out of the bootloop then push volume DOWN, home & power.
Sent from my SM-N900T using Tapatalk
audit13 said:
Isn't download mode volume down + home + power?
Click to expand...
Click to collapse
Sorry, I mean Vol down but no luck.
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Aykee said:
Sorry, I mean Vol down but no luck.
Click to expand...
Click to collapse
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
Sounds like a good idea, ordering on amazon..thanks
ludeawakening said:
Can you also not boot into TWRP by holding Home+PWR+Volume up? If so you can boot to Download Mode from there.
Sent from my toaster using Magic
Click to expand...
Click to collapse
I did all button combination, cant get into download nor recovery mode , am not sure if buttons are wack but it feel responsive and clicky but thanks anyway am going for the USB jig, I never had one.
audit13 said:
You may have to try a USB jig to get into download mode.
https://forum.xda-developers.com/galaxy-s3/general/ref-borrow-usb-jig-near-updated-t1891197
Click to expand...
Click to collapse
I got the USB jig but nothing happen after plugging in, any other idea please?
Removed the battery, inserted the jig, and then inserted a charged battery?
audit13 said:
Removed the battery, inserted the jig, and then inserted a charged battery?
Click to expand...
Click to collapse
The jig that I bought didnt do anything so I make my own, I can go to download mode now, installed this ROM/firmware N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME.tar.md5 succesfully but wont go pass beyond the tmobile logo, tried a few more firmware and lately this N900TUVUFOL1 and also , am stuck to Tmobile logo, anybody knows which firmware would likely bring my note 3 back to life, thanks in advance.:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
audit13 said:
Try this:
Uncheck everything in Odin except f reset time. Flash the latest ROM again. When you see the word "reset" in the status WIndow, remove the USB cable from the phone, remove the battery, replace battery, boot into recovery mode using buttons, factory wipe, and reboot.
Click to expand...
Click to collapse
After "reset" status, I did remove cable, remove batt and boot up to recovery, the blue light lit up as if its going to recovery mode , android logo showed up but phone boot up to normal but not pass beyond tmobile logo, so I did CF-root via odin , but still not booting to recovery.
Try flashing the entire ROM in AP.
audit13 said:
Try flashing the entire ROM in AP.
Click to expand...
Click to collapse
Thanks Audit13,
I manage to restore my Note 3 to TMobile Android 5 using repair firmware , it looks like I wipe out the partition ,My phone runs like new, am just wondering why I cant go to Download mode with button combinations of Volume -/Home/power , tried to install twrp via Odin, it says PASS but Vol +/Home/Power wont lead me to bootloader, did tried CWM , it will boot up but before I could start using it, it will reboot to normal and I could not go back to bootloader with button combo Vol+/Home/Power........HELP...
Download mode is volume down+home+power.
To flash TWRP with Odin, try this:
Open Odin and only check f reset time. Flash TWRP. When you see the word reset in the Odin status window, remove the USB cable from the phone, remove the battery, replace battery, press home + volume up + power.
N900TUVUFOB6_N900TTMBFOB6_TMB and N900 PIT - are the files am using after screwing up my partition( I dont know how I did that ), this Note 3 is running like a hot knife on a butter BUT the only bug I notice is Volume Up + Home + Power ( recovery) NOR Volume Down + Home + Power (download ) does not work, I can only go to download mode using a USB JIG and no other way. I can flash TWRP via Odin with Auto-reboot not ticked , so I could remove cable, battery , hoping to get me to recovery mode but I couldnt. Did I miss a step?I need help.