So I grabbed the OTA ZIP file that was posted here - THANK YOU by the way.
I boot into recovery and I am presented with the following :
Android System Recovery (2e)
the usual 4 menu options for Reboot, Apply sdcard:Update.zip, Wipe data and wipe cache.
I get an error on the recovery screen that says :
E: Can't open /cache/recovery/command
Can i still run the update? This is a relatively stock Incredible (Rooted, S-Off then unrooted.
Thx
Ron
I got that same error, pretty sure it just has to do with the 4 recovery commands your seeing right now. It probably just recreates that file once you see the commands. I went ahead and flashed the update.zip. I got other errors as it was flashing, but I don't they're linked.
Hey everyone, I am having some issues.
I had MIUI up and running for about a day but the Android market wouldn't work, I found the proper .zip and decided to flash it. I loaded up the clockwork apk and rebooted it...no here is where my problem begins. It didnt load up to the loader, it just got stuck at the red moto screen. Also I used the one click rooting program to root it.
I have so far tried the following:
Cahce Wipe
Data Wipe
Re-Installing MIUI (says that the signature cant be verified).
Also I get the following at the Android System Recovery
E: Cant mount CACHE:recovery/command
E: Cant mount CACHE: recovery/caller
E: Cant mount CACHE: recovery/log
Any ideas? Im a bit of a newb and would like to get the phone running (its my alarm clock lol)
Flash Froyo with RSDLite and then flash with the CWM the MIUI ROM
what is installed in your phone ?
type to install Cmiui its one of the good ROM i am using same
i have installed 2.1 but you install 1.8 or 2.0 its working fine.
here is the link of that ROM
http://forum.xda-developers.com/showthread.php?t=1268997
download --> go to recovery mod --> wipe data and cache --> install zip from SD card --> select zip and wait for some mins and your phone will start cmiui
Regards,
cheat.
So lets list things ive done with the phone in the correct order:
- Downgraded to 2.3.7
- Unlocked bootloader
- Gained root access and installed SuperUser
- Installed CWM with a fastboot flash command
heres where it went wrong
- Now stuck on bootloop from CWM, if i select reboot system now.
- When i tried to mount usb storage, win7 pc said failed to install MTP drivers, installed them manually dont pop up....
Im now stuck with a posibbly bricked XPS which i only recieved yesterday!
Someone help me plz as i cant do anything right now!
ERRORS:
When selecting "mount usb storage"
on phone in cwm: E:Unable to open uns lunfile blabla
on pc in win7: MTP USB Device failed
ultimo1337 said:
So lets list things ive done with the phone in the correct order:
- Downgraded to 2.3.7
- Unlocked bootloader
- Gained root access and installed SuperUser
- Installed CWM with a fastboot flash command
heres where it went wrong
- Now stuck on bootloop from CWM, if i select reboot system now.
- When i tried to mount usb storage, win7 pc said failed to install MTP drivers, installed them manually dont pop up....
Im now stuck with a posibbly bricked XPS which i only recieved yesterday!
Someone help me plz as i cant do anything right now!
ERRORS:
When selecting "mount usb storage"
on phone in cwm: E:Unable to open uns lunfile blabla
on pc in win7: MTP USB Device failed
Click to expand...
Click to collapse
I fixxed it by do ing the following:
- Use the power button + Volume up button and hold it, to HARD SHUTDOWN the device
- Enter flashmode by holding volume down button
- Flash 2.3.7 stock rom
And cwm is gone and you can start all over with a correct version of CWM
That's it, I present you CWM Based Recovery On-Screen Touch Navigation Controls by Team UtterChaos for our Galaxy 551 :laugh:
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
DOWNLOAD
Code:
You can find it [URL="http://goo.gl/WFr5Q"]HERE[/URL]
Code:
OFFICIAL THREAD [URL="http://forum.xda-developers.com/showthread.php?t=1485829"]HERE[/URL]
Installation
Code:
1. Make sure you have got GingerBread bootloader.
2. Download Odin Multidownloader v4.34 for GT-I5510, Callisto_v1.ops and latest Clockwork Mod Recovery if you do not have them already.
3. Run Odin Multi downloader v4.34 and select the Callisto_v1.ops by clicking OPS button.
4. Select One Package Option and Click One Package button and select the recovery file name (CWM_5.0.2.7_touch_bebek15.tar.md5) file you downloaded.
5. Leave other settings to default (i.e. don’t change any other options/settings)
6. When you are done reboot your phone in download mode (Press Q + Power button to go to download mode)
7. Connect your phone in download mode to your computer via USB Cable.
8. When Odin detects your phone (If you see a com port number written in yellow background at the top left, then your phone is detected. View image.), click Start button.
9. Wait till Odin finishes the job (approx. 5-10 seconds:cool:) and when it reports ‘PASS’, you can disconnect your phone.
Credits
Code:
[B]Team UtterChaos
squadzone
willingmagic
didhiy
yagya
me[/B]
hint: you can't restore nandroid backup from other version of cwm with this.
thanks priyesh103 for this video
Screenshot of CWM touch recovery
look at here,
Just asking, do we need an "Power Off" option on the recoveries?
sometimes a poweroff option is needed....
Sent from my GT-I5510 using xda premium
odin doesn't detect my phone !!
pls share the drivers for win 7 64 bit
help me !!!
can u provide drivers for win7 64 bit
i need to install cwm but odin doesnt detect my phone
pls give me the exact procedure to insall cwm
edit :successfully installed cwm
please help, wrong flashing this cmw cause my phone firmware is froyo, now I can not get to the download mode, try using a usb jig (with resistor 330k ohm) also can not help...
nasyiinhd said:
please help, wrong flashing this cmw cause my phone firmware is froyo, now I can not get to the download mode, try using a usb jig (with resistor 330k ohm) also can not help...
Click to expand...
Click to collapse
same problem here :crying:, any luck in resurrecting it
CWM errors
Hi,
Thanks for the great instructions! I followed them precisely but as I boot to the recovery mode (power+T) I get the following errors nor any commands work in CWM. I even tried to flash the CWM with ODIN again.
CWM-based recovery v.5.0.2.7
E: Can't mount /cache/recovery/Command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Please note that I had a stock Samsung Galaxy GT-I5510 with Android 2.3.6. So I have not rooted my phone in any way. Should I? How can I do it? Thank you for your support!
P.S. As I will get the CWM Recovery to work I will flash CyanogenMod 10.2.
http://forum.xda-developers.com/showthread.php?t=2438393
qrk said:
Hi,
Thanks for the great instructions! I followed them precisely but as I boot to the recovery mode (power+T) I get the following errors nor any commands work in CWM. I even tried to flash the CWM with ODIN again.
CWM-based recovery v.5.0.2.7
E: Can't mount /cache/recovery/Command
E: Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
Please note that I had a stock Samsung Galaxy GT-I5510 with Android 2.3.6. So I have not rooted my phone in any way. Should I? How can I do it? Thank you for your support!
P.S. As I will get the CWM Recovery to work I will flash CyanogenMod 10.2.
http://forum.xda-developers.com/showthread.php?t=2438393
Click to expand...
Click to collapse
You want to put SD card with CyanogenMod 10.2 and gapps to your phone, then choose option install wipe data/factory reset, install zip from SD card and choose .zip file containing CyanogenMod 10.2, and then install gapps and restart the phone.
Phone doesn't reboot
Hi,
I hope anybody reads this.
I downloaded the .tar.md5 files and proceeded with the instructions.
Though Odin tells me that it's flashing the telephone this is the last message of the log "<1> Close serial port and wait until rebooting."
And nothing happens afterwards. I can only see that the phone switches on again, but the screen stays dark.
Can you help me with anything? I already spent hours because i just tried to get a custom recovery on the phone because I couldn't install CyanogenMod from the SD card.
H4NNE5 said:
Hi,
I hope anybody reads this.
I downloaded the .tar.md5 files and proceeded with the instructions.
Though Odin tells me that it's flashing the telephone this is the last message of the log "<1> Close serial port and wait until rebooting."
And nothing happens afterwards. I can only see that the phone switches on again, but the screen stays dark.
Can you help me with anything? I already spent hours because i just tried to get a custom recovery on the phone because I couldn't install CyanogenMod from the SD card.
Click to expand...
Click to collapse
Which version of odin are you using?
Hi,
It's 4.43
I also started it as administrator and tried different USB-Ports.
What does the .ops file contain? Some register adresses?
H4NNE5 said:
Hi,
It's 4.43
I also started it as administrator and tried different USB-Ports.
What does the .ops file contain? Some register adresses?
Click to expand...
Click to collapse
Try odin 4.34.
.ops file contains partition table of your phone.
So first I flashed the stock firmware back again to be safe that at least it's still working. That was successful.
Ok I forgot to install the GB bootloader, I didn't mention this. But from the links of the first page none is working anymore.
Can you provide me one?
Also now I can't get into the stock recovery anymore with "T + Power".
H4NNE5 said:
So first I flashed the stock firmware back again to be safe that at least it's still working. That was successful.
Ok I forgot to install the GB bootloader, I didn't mention this. But from the links of the first page none is working anymore.
Can you provide me one?
Also now I can't get into the stock recovery anymore with "T + Power".
Click to expand...
Click to collapse
Cwm and stock
Bootloader
Hi kac321,
Thanks but I need the bootloader. I already have the recovery.
H4NNE5 said:
Hi kac321,
Thanks but I need the bootloader. I already have the recovery.
Click to expand...
Click to collapse
Check post #18
Hi folks,
I'm a fairphone 1 1st edition (repartitioned with 1.6 update) owner and i have been eagerly waiting for cyanogenmod for quite a while. I saw this thread: http://forum.xda-developers.com/showthread.php?t=2615613 and followed the installation instructions.
Procedure:
1) [Install MTK 6589 driver][1]
2) Install + Open up [MTK Droid Root & Tools v. 2.5.3][2]
3) Root phone in MTK Droid Root & Tools
4) Backup phone with MTK Droid Root & Tools
5) Download [Recovery Image][3] (KitKat) and follow [installation instructions][4]:
a) copy the recovery to the device: adb push cwm-fp1-kk.0.1.img /storage/sdcard1
b) adb into device: adb shell
c) flash to recovery: dd if=/storage/sdcard1/cwm-fp1-kk.0.1.img of=/dev/recovery
6) Reboot into Recovery with [Rom Manager 6.6.3.7 ][5]
7) Select [zip file][6] from sd card and install
Error message: Can't install this package on top of incompatible data. Please try another package or run a factory reset. E: Error in /storage/sdcard1/cm-11_FP1-ota-UNOFFICIAL-FULLOFBUGS-0.1.zip
(Status 7)
Installation aborted.
I also deleted the assert line in the updater-script file and updated the zip file, as during the installation Error Status 7 showed up (see this [site][7]).
Still installation aborts, this time no error message is given. Any ideas? Thanks in advance!
[1]: http://vondroid.com/resources/mediatek-mt6589-driver.236/#.VAW0VUQdHT8
[2]: http://samclone.blogspot.de/2013/11/mtk-droid-root-tools-248.html
[3]: http://click.xda-developers.com/api...goo.im/devs/chrmhoffmann/cm-...fp1-kk.0.1.img
[4]: http://forum.xda-developers.com/showthread.php?t=2615613
[5]: https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
[6]: http://forum.xda-developers.com/fairphone/orig-development/rom-cyanogenmod-11-4-4-4-kitkat-t2862874
[7]: http://highonandroid.com/android-roms/how-to-fix-status-7-error-with-cwm-recovery-on-rooted-android/
madde- said:
Error message: Can't install this package on top of incompatible data. Please try another package or run a factory reset. E: Error in /storage/sdcard1/cm-11_FP1-ota-UNOFFICIAL-FULLOFBUGS-0.1.zip
Click to expand...
Click to collapse
I had the same error message try first formatting the system partition.
I think that you need to "wipe data" in cwm before flashing when you install for the first time.
Chris
chrmhoffmann said:
I think that you need to "wipe data" in cwm before flashing when you install for the first time.
Chris
Click to expand...
Click to collapse
works like a charm!
Thank you very much for your help and your great work! Any way to flattr you or send you bitcoin donations for your work?
Hi everybody!
I'm new here.
I have just installed cyanogen mod on my FP1...very happy with it! thanks Chris!