[q] flash phone back to sprint - Samsung Epic 4G Touch

My friend needs to flash his phone back to sprint, he flashed it to a mexican company, how do i get it back to sprint Thanks in advance

I'd think flashing a stock Rom for the exact model number should do the trick.

Ci2e said:
I'd think flashing a stock Rom for the exact model number should do the trick.
Click to expand...
Click to collapse
So there is no programming? Like PRL, or anything else?

PRL is the preferred roaming list. I'm pretty sure if you flash EL29 One Click Odin it should restore the phone to its Sprint like ways.

Ci2e said:
PRL is the preferred roaming list. I'm pretty sure if you flash EL29 One Click Odin it should restore the phone to its Sprint like ways.
Click to expand...
Click to collapse
Thank you all for your reply i will try it:good:

Ci2e said:
I'm pretty sure if you flash EL29 One Click Odin it should restore the phone to its Sprint like ways.
Click to expand...
Click to collapse
Just did this^ a few weeks ago to get my speaker flixed, worked like a charm. i also just to be safe removed any folders of suspicion like clockworkmod, my personal "my roms" folder, miui, etc...

I flashed back to stock but It didn't work with his phone, I will need to program it back to sprint settings, any ideas how to do it?
Sent from my SPH-D710 using xda premium

If you use a "full rstore" odin one click it will reset everytging
sent from MY BAD A$$ ET4G

rudyp9 said:
I flashed back to stock but It didn't work with his phone, I will need to program it back to sprint settings, any ideas how to do it?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Find EL29 One Click from Sfhub and apply it. Then do ##786# and perform a factory reset from here as this will clear the NVRAM data. This should clear the NVRAM data and force a hands-free activation on Sprint during the next boot and solve the problem.

patrao_n said:
If you use a "full rstore" odin one click it will reset everytging
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
Everything in the ROM will be reset, but not the alternative carrier flash. I know because I'm flashed to cricket and used an Odin one-click to root with no adverse affects to my flash.
Other tools are needed to flash back to Sprint that i know of, but I'm not familiar with them, sorry. But...
If the phone was flashed to a Mexican carrier because it has a bad ESN with Esprint , then you're out of luck there. If the ESN is good, then check the link i found below. It's from Cricketusers but should apply to your current carrier (I'm saying SHOULD... Just trying to help and point the way).
http://www.cricketusers.com/showthread.php?p=63766
Trolling from my Cricket-flashed Galaxy S2 E4GT using Tapatalk 2

Related

Help! No signal/data after restoring stock backup (Sprint)

Here is what I did:
1. flashed CWM
2. backed up the factory stock ROM
3. Flashed Phantom's ROM
4. Booted back to CWM and restored stock ROM
No signa/data now. It's like I have no radio.
flashed the LG2 modem and still no signal/radio
Back to CMW. Flashed a stock/deodexed/rooted ROM = no signal/data
What could be the problem? Help!
Did you happen to lose your IMEI?
Sent from my SAMSUNG-SGH-I747 using xda premium
Ahve you look at setting and try to update prl and profile, also check in settings, about device and status to check for IMEI
Sent from my SGH-T999 using Tapatalk 2
I do have the IMEI. It's a 15 digit number.
I just flashed the factory restore ROM with ODIN and still no data/signal
WTFFFFF is going on?????
jgalan14 said:
Ahve you look at setting and try to update prl and profile, also check in settings, about device and status to check for IMEI
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
can't update prl and profile because i have no data
AvatarOfFrost said:
can't update prl and profile because i have no data
Click to expand...
Click to collapse
S*** call sprint right now that you back in stock, they will re provision your device with some codes have a paper ready they will give you lsm number might come in handy in the future
Sent from my SGH-T999 using Tapatalk 2
jgalan14 said:
S*** call sprint right now that you back in stock, they will re provision your device with some codes have a paper ready they will give you lsm number might come in handy in the future
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
can't call because this is my only phone.
i chatted with an agent online and they refreshed the device and services and still no dice.
i guess i'm going to a sprint store and see what they say
Conclusion?
AvatarOfFrost said:
can't call because this is my only phone.
i chatted with an agent online and they refreshed the device and services and still no dice.
i guess i'm going to a sprint store and see what they say
Click to expand...
Click to collapse
Were you able to fix it?

Need assistance to help a friend...

A buddy of mine trashed his SGS3 and got it stuck in a boot loop.
He was also handicapped by being on a MAC
As he was able to get into both download mode and recovery, (CWM 5.5.0.x) I assured him he could recover his phone..
Got him to dl loaded the following ROM, and got it copied to his external SD card:
[ROM] Deodexed + Completely debloated T999UVLEM
http://forum.xda-developers.com/showthread.php?t=1752327
Click to expand...
Click to collapse
Then booted into recovery, did a factory reset, installed the ROM, (twice) then did a fix permissions
His SGS3 will now boot up to the desktop, and shows the phone signal
The remaining issue is he does not have data working, and there also seems to be an issue with the "home" button.
If this was my Sprint SGS3, I would be thinking there is a SW issue with the modem drivers or some such, but I am unsure how to check/verify this on the t-mobile version, and was looking for tips on what to load, and/or what to check to resolve the lack of data signal on his SGS3.
Phone info:
Samsung SGS3 - SGH-T999
carrier: t-mobile
baseband version: T999UVLH2
Any tips?
What ROM did you flash ?
Sent from my SGH-T999 using xda premium
funziebear said:
What ROM did you flash ?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
This one: [ROM] Deodexed + Completely debloated T999UVLEM
From this thread: http://forum.xda-developers.com/showthread.php?t=1752327
Does he still have his IMEI? Might either need to inject the IMEI back in, or if it's still intact, you might just want to try and Odin back to stock and start from scratch.
Sent from my Wicked S3
sleevasteve said:
Does he still have his IMEI?
Click to expand...
Click to collapse
Not sure how to check/fix that, will do a thread search.. thanks
edit: found a help thread, but once again.. looks like it needs a windows system...sigh..
http://forum.xda-developers.com/showthread.php?t=1858174&highlight=imei
sleevasteve said:
you might just want to try and Odin back to stock and start from scratch.
Sent from my Wicked S3
Click to expand...
Click to collapse
This is my preference, but as he has a MAC, thats doesn't seem to be an option
Does he still have it? easiest way to check is *#06# on dialer
Also is there a possibility it might be blacklisted ?
Sent from my SGH-T999 using xda premium
funziebear said:
Does he still have it? easiest way to check is *#06# on dialer
Click to expand...
Click to collapse
Thanks, will have him check..
funziebear said:
Also is there a possibility it might be blacklisted ?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Not that I am aware of, it was working before he started messing with it, and just got it into a bootloop he couldnt get out of.
DCRocks said:
A buddy of mine trashed his SGS3 and got it stuck in a boot loop.
He was also handicapped by being on a MAC
As he was able to get into both download mode and recovery, (CWM 5.5.0.x) I assured him he could recover his phone..
Got him to dl loaded the following ROM, and got it copied to his external SD card:
Then booted into recovery, did a factory reset, installed the ROM, (twice) then did a fix permissions
His SGS3 will now boot up to the desktop, and shows the phone signal
The remaining issue is he does not have data working, and there also seems to be an issue with the "home" button.
If this was my Sprint SGS3, I would be thinking there is a SW issue with the modem drivers or some such, but I am unsure how to check/verify this on the t-mobile version, and was looking for tips on what to load, and/or what to check to resolve the lack of data signal on his SGS3.
Phone info:
Samsung SGS3 - SGH-T999
carrier: t-mobile
baseband version: T999UVLH2
Any tips?
Click to expand...
Click to collapse
Can you also ask him to check the APN settings for Tmobile. It will be in more settings for networks and Access Point.
run virtual pc or a computer within a computer program like that or go down to an internet cafe or something
Sent from my SGH-T999 using xda premium

Another problem: No Mobile Data

My last problem (Phone says all my contacts and even random numbers are blocked)- http://forum.xda-developers.com/showthread.php?t=2357907 got worse. I decided to go back to EL29 but 3g doesn't work at all and doesn't even show up in the staus bar. 4g appears and says it's connected but doesn't actually work. Wi fi works fine, but can't text or call because I have no mobile data. So what options do I have left?
What's your modem?
btoddweber said:
What's your modem?
Click to expand...
Click to collapse
I'm completely stock so EL29
Did you use odin or mobile odin? Mobile odin will not flash modems.
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
Did you use odin or mobile odin? Mobile odin will not flash modems.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Yea I know, used PC odin to flash EL29
Nvm
Well then I am at a loss. Take it to sprint.
Sent from my SPH-L900 using Tapatalk 2
patrao_n said:
Well then I am at a loss. Take it to sprint.
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I was really hoping to not call them
Have you tried a one click or was it the ROM then the modem you just flashed?
btoddweber said:
Have you tried a one click or was it the ROM then the modem you just flashed?
Click to expand...
Click to collapse
Used Odin OC to restore back to EL29 haven't done anything after that
Sorry stumped as well...could your APNs have gotten jacked up?
btoddweber said:
Sorry stumped as well...could your APNs have gotten jacked up?
Click to expand...
Click to collapse
i don't know I never messed with it and I'm pure stock so they should be how they were when i got the phone right?
Did you flash another ROM first before going back to EL29?
btoddweber said:
Did you flash another ROM first before going back to EL29?
Click to expand...
Click to collapse
Yes was on TW, reflashed twice and even flashed CM 10 then MIUI v4 before going to EL29. All clean flashes.
Only reason I ask is that I flashed an AOSP ROM and my APNs got out if whack.
So I just one clicked GB27 to start totally over fresh.
btoddweber said:
Only reason I ask is that I flashed an AOSP ROM and my APNs got out if whack.
So I just one clicked GB27 to start totally over fresh.
Click to expand...
Click to collapse
I guess the only thing left is to call sprint

[Q] No Phone Service or Data After Flash. Please help

A while ago I rooted my phone with cwm. I remained on the stock rom for a while, but eventually moved to cm 10. No problems. I wanted more features so I'm currently running a pacman nightly. Everything seemed to work, but after I flashed it I had very, very little space left in my internal storage. I read that this was probably a bug in cwm that caused Android system files to be duplicated, possibly even multiple times times. This is what I believed had happened. So yesterday I flashed twrp with Odin, and after rebooting it asked me to activate my phone. I don't have any cell or data signal, only wifi. I've looked everywhere and I can't find any single solution. Does anyone know what may be wrong, and how to fix this? I can try and post more information about this problem if necessary. Please help, thanks.
Anyone? Restoring backups from when everything worked does not work, nor does flashing a modem. When I go to "About Phone" in settings, my phone number is no longer my number. It just says 000-000-0016 (not my number). Sometimes I can get a data signal, only in areas with high signal. It just says "searching for service" everywhere else. On each boot, it tells me to "activate my device" but that doesn't work. I have no idea what to do at this point, can anyone help?
And now I just saw on the lockscreen "no sim card - searching for service". Not sure if that helps, but I'm open to anything at this point
Aaron R said:
And now I just saw on the lockscreen "no sim card - searching for service". Not sure if that helps, but I'm open to anything at this point
Click to expand...
Click to collapse
Do you have Sprint version? Just curious because of the "no sim card". I guess some ported roms will show that, but if it's Sprint version, I would flash back to TW ROM, reactivate by the ## code(don't remember what it is) or call Sprint to reactivate. Better to be on TW stock Rom if you use dialer codes or call Sprint.
Edit: dialer code is ##72786# to reset APNs. Once on TW ROM, open up phone, type in code in dialer.
sent from my GalaxyS3
Do I need to be on the stock TW rom to use the dial code to reset? I've already tried to use it on my pacman rom and it didn't work, saying it had no signal when I tried to dial it. Also, yes I am on Sprint. Would screenshots of the "about phone" page in settings help? Like I said, it lists an incorrect phone number as my number.
Aaron R said:
Do I need to be on the stock TW rom to use the dial code to reset? I've already tried to use it on my pacman rom and it didn't work, saying it had no signal when I tried to dial it. Also, yes I am on Sprint. Would screenshots of the "about phone" page in settings help? Like I said, it lists an incorrect phone number as my number.
Click to expand...
Click to collapse
Yes, you need to be on TW to use the dialer. The reset is ##72786#. This will completely reset your phone, so make sure you have everything you want saved backed up to your pc. It will go through the activation process as if you just got it out of the box, but my advice,flash back to stock, unrooted, from scratch, and then do it. Sucks, I know, but that's what I'd do.
Sent from my SPH-L710 using XDA Premium 4 mobile app
So it'll restore my phone number and reset everything?
And how would I go about unrooting?
Aaron R said:
So it'll restore my phone number and reset everything?
Click to expand...
Click to collapse
Yes, it should do exactly that. It will self-activate with your carrier upon reboot and get you back to the original settings. And unroot by flashing a stock unrooted tar. I'm sure qbking77 has a video. There are a lot of tutorials about rooting/unrooting.
Sent from my SPH-L710 using XDA Premium 4 mobile app
So if I flash the stock unrooted tar, I assume that I'll lose the custom recovery (cwm) but I bought cwm touch. Am I going to have to buy that back again if I choose to root my phone again?
Aaron R said:
So if I flash the stock unrooted tar, I assume that I'll lose the custom recovery (cwm) but I bought cwm touch. Am I going to have to buy that back again if I choose to root my phone again?
Click to expand...
Click to collapse
I don't understand why you would buy CWM touch? It's free, and you can get a working, modified copy from Kennyglass123's post here. But yes, you will lose root, recovery, apps, internal storage, everything except what's in your sd card. So backup pics and such to your pc first!
http://forum.xda-developers.com/showthread.php?t=2391616
http://forum.xda-developers.com/showthread.php?t=2391616
Sent from my SPH-L710 using XDA Premium 4 mobile app
It's free...of course it's free. Anyway so I guess I'll try flashing the stock tar later, and we'll see if that works. It's been extremely inconvenient being off the grid for a couple days, I hope this works. Thanks for all your help so far
Aaron R said:
It's free...of course it's free. Anyway so I guess I'll try flashing the stock tar later, and we'll see if that works. It's been extremely inconvenient being off the grid for a couple days, I hope this works. Thanks for all your help so far
Click to expand...
Click to collapse
Good luck, let us know how it works out.
Sent from my SPH-L710 using XDA Premium 4 mobile app
And where again could I get the stock tar? And after obtaining it, I would just flash it with Odi, correct?
Aaron R said:
And where again could I get the stock tar? And after obtaining it, I would just flash it with Odi, correct?
Click to expand...
Click to collapse
I'm happy to help man, but XDA is also about learning. I think you'll have a greater sense of accomplishment if I don't spoon feed you the solution. Google your carrier, stock, Odin, tar, unroot, etc, etc, and you'll find everything you need(put xda on the end of any search string, that helps weed out the crap). As long as the OP thread and file name matches your phone(sphl710), you will be fine. If you're unsure, post the thread of the file you plan on flashing(yes, through Odin), and I'll confirm for you. Good luck, happy Googling!
Sent from my SPH-L710 using XDA Premium 4 mobile app
Did everything, flashed the tar, and now its stuck in the boot sequence. The screen just says "Samsung" and the notification light is pulsing blue to a bluish green, like it does on boot. It's been doing this for about ten minutes now...what do I do?
Aaron R said:
Did everything, flashed the tar, and now its stuck in the boot sequence. The screen just says "Samsung" and the notification light is pulsing blue to a bluish green, like it does on boot. It's been doing this for about ten minutes now...what do I do?
Click to expand...
Click to collapse
What tar did you flash?
Sent from my SPH-L710 using XDA Premium 4 mobile app
I flashed the tar found here:
http://forum.xda-developers.com/showthread.php?t=1737859
Aaron R said:
I flashed the tar found here:
http://forum.xda-developers.com/showthread.php?t=1737859
Click to expand...
Click to collapse
do you get a pass message or anything? try booting into stock recovery and wiping.
kaos420 said:
do you get a pass message or anything? try booting into stock recovery and wiping.
Click to expand...
Click to collapse
Wipe data/factory reset, okay. Do I wipe cache partition?

[Q] Straight Talk (Tracfone) Sprint Galaxy S3 SCH-S960L flashed wrong modem

I use the Sprint SlimBean ROM and I had no issues with it on my SCH-S960L. I had no issues with my mobile connection except for the fact that it it took some time to connect to mobile data services or even required a restart or Airplane mode toggled. This along with it sometimes did not switch between 3G and LTE when it should. Because of this I attempted to flash a newer Sprint Galaxy S3 modem. This completely disestablished any connection to services. It has 0 bars and cannot make calls, send texts, or use data. I have tried to reflash the ROM but of course, it did not help at all.
Now in the light of hope, I made a backup of the efs and firmware folders before flashing. I'm not sure how I can fix my issue with this but it was suggested to do so before flashing.
My baseband version was S960LWYAMD6. While I could reflash the old modem, (with help) I would prefer a better modem. (if there are any)
Any help is appreciated.
With best regards,
SirBenjamin
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
prboy1969 said:
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
Click to expand...
Click to collapse
chxnugs said:
i know this is sprint galaxy s3 section, but the straight talk s3 is basically the same phone and there is no section for it.
if you own this particular model, then you would know that its pure hell trying to find ANY files. this is the stock MD6 modem.bin ripped from my phone. ive seen people ask for this modem because they flashed the MD4 modem in hopes of getting their MSL and/or for the benefits of being able to use the 16-digit password. (which reminds me.. i have read of ways to port the 16-digit password from a .dll file in the phone? i have done loads of searching, but the password is NO WHERE to be found) and needed the stock modem. so for anyone that needs it here it is.
hopefully us ST S3 users will eventually gather up all the odin files to completely restore our phones when needed
Click to expand...
Click to collapse
I tried to flash the file chxnugs provided. I used both Mobile Odin and replaced the modem file in another flashable ZIP. Neither of them worked and I still get 0 bars/unknown baseband.
Honestly I have no idea what to do to fix this but it needs to work.
Again I say, all help is appreciated.
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
chxnugs said:
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
Click to expand...
Click to collapse
chxnugs said:
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Click to expand...
Click to collapse
I got the same results. I extracted the .bin but renamed it to NON-HLOS.bin since Mobile Odin would not accept it as modem.bin. Am I flashing this wrong?
Sent from my SCH-S960L using Tapatalk
Did you try any of my other suggestions form post #2 ?
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
prboy19648801865 said:
Did you try any of my other suggestions form post #2 ?
Click to expand...
Click to collapse
chxnugs said:
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
Click to expand...
Click to collapse
Proby, I tried to do the other things you suggested. I can't update the PRL/Profile since I'm on a custom ROM. That is unless there is another way. I did not understand what you meant with the number you mentioned. If you wanted me to call that it did nothing.
As for chx, unfortunately it still did not fix it. This quick little modem update is turning into a nightmare. Not only that, but no sound plays, the microphone does not work, and DSP Manager crashes whenever I try to play media.
I really appreciate both of your support though.
Yay! I used Mobile Odin Pro and flashed a file from another thread. It may have been the file or using Mobile Odin Pro since it downloaded the correct driver. I appreciate all of your help, though.
Sent from my SPH-L710 using Tapatalk

Categories

Resources