Develop Bugs

[ROM] Cow ROM v7 (Bionic Cow 2)

Version 7 of Cow ROM: Bionic Cow 2.
- For arco68
It's basically an update to Bionic Cow using latest firmware from Sammy - I8150DXLC1. Features:
1) The OC kernel has been rewrote. It should be more stable and graphic score improved.
2) Bionic Scorpion Optimization library. Using NEON instructions for faster memory operations. Learned from arco68 github for ICS.
3) CowPanel 2 - use this util to configure VSYnc on/off. For speed, use VSync off. For smooth, use VSync on + triple buffering. Read more here. You also may configure zRam option here. zRam is off by default. Read more here.
4) Many CPU governors: Default using OnDemandX for best battery; 80% left in 24 hours. Use "Performance" for benchmarking.
5) More RAM - 358Mb available, compare to 351Mb in stock ROM.
6) Using a super light Zeam Launcher. Thanks cloakt for permission to use.
7) Internal / external sd card swap, CRT screen off effect, Low Memory Killer Tweaked, OnDemandX tweaked, Custom Bootup animation and Larger SD Card cache, Voice Search, etc.
8) Based on arco68 GB kernel. Without which, none of this is possible.
Special thanks to arco68, tch9, andynroid and pinkyunki, Murny Umairah, Myrule Anarki, Santos San Martin and Mohd Fazrin Daud from SGW group.
*WARNING*: Don't use OC ROM unless you know what you are doing. The ROM will automatically reset to 1.4ghz - OnDemandX after reboot as a safety precaution. I only set to 1.8ghz OC for short time during Cheat Engine hacks, zip / unzip, benchmark, etc. I always reset back to max 1.4ghz for normal used. I strongly recommend you to set a temperature profile if CPU ever get above 50C you should lower max clock back to 1.4ghz.
So, here is the link:
None Overclock:
Part 1: http://www.mediafire.com/?b0hcu82bpq9cu9n
Part 2: http://www.mediafire.com/?6qy19q4995g75w0
Overclock:
Part 1: http://www.mediafire.com/?7k7ei26n46e44bb
Part 2: http://www.mediafire.com/?e368mc427y19611
Here is how to install the ROM:
1. Enable recovery.
2. Use 7zip, right click on xxxx.001, extract. It will create the zip file required for flashing. Copy this zip into your phone. (Don't extract xxx.002)
3. Boot into ClockWorkMod / RZRecovery, backup your current ROM using nandroid (just in case).
4. If you are upgrading from my previous ROM;
- BEFORE installing the ROM, Uninstall CowPanel: Setting, Application, Cowpanel, uninstall
- Wipe Dalvik-cache. All your settings and app will remained. Theme will changed though.
5. If you are installing from stock or from other custom ROM, best to wipe everything using CWM, including your USB and external sd card. Reinstall everything from fresh, don't restore anything from Titanium Backup or anything.
Google Map? Missing apk? Original theme? If you want to restore to stock theme, get all the apk here.
Report Problem: If you encounter FC or any problem, please provide logcat so I may trace it:
1. Connect phone to USB
2. adb logcat > log.txt
3. In your phone, reproduce the crash / FC / etc
4. Kill all adb process in your PC
5. Zip and send me the log.txt
Update Radio Firmware
I8150DXLC1 comes with an updated Radio firmware. This should improve voice call quality. Check if you need to update this, go to Check "Setting", "About phone", "Baseband version". If you already have I8150DXLC1 or newer you dont need this. If not, use Odin to flash this. This will only update the Radio firmware, nothing else will change. You can do this before or after install Bionic Cow 2 ROM.
1. Get Odin.
2. Get ancora.ops.
3. Get radio firmware.
4. Boot into "download mode". Connect phone to PC. Start Odin
5. Select OPS file = ancora.ops. Select One Package = radio firmware, check "One package", "Auto reboot", "Protect OPS".
6. Start and wait till it complete.
Old Bionic 1
Non-oc:
Part 1: http://www.mediafire.com/?6994bk9qhxkde8w
Part 2: http://www.mediafire.com/download.php?gvc1j2da6c51u5a
- Refer to this guide on how to extract this. Thanks andynroid.
OC: (link fixed)
Part 1: http://www.mediafire.com/?cr5nc6zb1k5w0ye
Part 2: http://www.mediafire.com/download.php?u1xp01yr15saujw
Disclaimer: I am not responsible if you brick your phone I tried it, it work on my phone and a few others.

wow. downloading, will try and post feedback. did you add any languages? do you know a way to do so? thanks

cowithgun said:
This is my 6th ROM! It has all the benefit from all my previous ROM and more. Featuring Bionic Theme created specifically for this ROM! This ROM is a result from group of friends helping each other. Without it, it would be so bore and this ROM may never exist. Thanks pinkyunki, Murny Umairah, Myrule Anarki, andynroid and all the friends from our SGW group.
Click to expand...
Click to collapse
Awww Yeaaah! Just what i need! Hehehe what a coincidence when i said about theme-ing just now. Currently downloading your Bionic ROM!
Btw, is the scale-old-tv present in this ROM, Cow? HAHA! xDD

The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium

andynroid said:
The Six Million Dollar Man...This Is The Six Million ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
Thanks! I did spent more time on this ROM than in any other ROM.

andynroid said:
The Six Million Dollar Man...This Is The Six Million Dollar ROM !
Congratulations CWG.....!
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
You're one of the respected members in building this ROM, right? Wish i could be as great as you guys, developing something. Haih. :/

Downloading noww.!!!!xD
sent from another space

Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!

As now, i'm using your Bionic, Cow. Love the green-ish theme, seems smoothly smart!
A few things btw :
1. When booting up, there is still sound of the boot animation. How to disable it?
2. When locking the phone, the transition is somewhat like distortion-type, not like the scale-old-tv in your previous ROM. Is it supposed to be that way or my phone goes wrong?
3. The "3G icon" in status bar alternately goes from small to big and vice versa. Also is this meant to be as such? :/
Apart of those, it is indeed a GREAT and SUPERB ROM.
Sent from my GT-I8150 using xda premium

Arrgh at 58% DL.......Part-2....
CRT......The ROM is too fast for it to execute...
Sent from my GT-I8150 using xda premium....Using CWG V6 TestBuild

TuxBrothers said:
Thanks for this wonderfull rom cow!!
Antutu 5067 on 1,8GHz !
I really love the theme, very nice!!
Thanks my friend!!
Click to expand...
Click to collapse
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium

This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )

Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium

MAMUTHcz said:
This ROM looks absolutely incredible
I envy you guys...i would love to use this rom, but unfortunately i need swype in czech, so this rom is not for me I wish you'd use European rom as a base for your roms ( maybe in the future? )
Click to expand...
Click to collapse
i would like my little brother try this rom but no italian.
Inviato dal mio GT-I9100 usando Tapatalk

andynroid said:
Why is everybody awake here...looks like somebody will be on MC due to COW BIONIC FOBIA.....
Its 4am here....bye guys be extracting n zipping n CWM.....BRB !
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
it's 9:53 pm here in czech republic + I have night shift so no sleep for me right now

When im at home i will download and flash... Huhuhuh.
Sent from my GT-I8150

My Antutu none OC...
Sent from my GT-I8150 using xda premium

SyzwnFrzRdz said:
For benchmarking, you set to 1.8GHz for both minimum and maximum right? What governor did you use when using Antutu?
Sent from my GT-I8150 using xda premium
Click to expand...
Click to collapse
min speed ? ondemand or ondemandx ?

I must be dumb.
I download xxx.7z.001 and xxx.7z.002.
Right click on 001: extract here puts META-INF, data and system folders and the other files in the folders I am working in. If I right click and extract to GT-I8150-BIONIC it just puts those files in a folder. No sign of a flashable zip.
What am I doing wrong?
Bomoh, an user who doesn't have permission to post in Dev section yet, told me this solution and it's working. Thanks to him!
Extract 001 in a folder > select all the files > right click > 7-zip > add to archive.
In 7-zip window, change "Archive format" option from "7z" to "zip" then click OK.
Click to expand...
Click to collapse

Btw. This rom have portuguese on it?
Sent from my GT-I8150

[MOD] PIMP MY ROM v2.1.2 - Make Your Phone Awesome

READ 1ST BEFORE ASK
tested by my self using CM9 by arco B3
IM NOT RESPONSIBLE IF YOUR PHONE BRICKED.
This is not a ROM
this is tweaks/MODS/Hacks etc. for your phone
this is compatible with STOCK or AOSP ROMS
as long as you rooted your phone and init.d support i mean custom kernel
and CWM or any other recovery
Watch this for more info.
http://www.youtube.com/watch?feature=player_embedded&v=YpdGuj2oDkA
DOWNLOAD FOR GALAXY W
ORIGINAL DL LINK:
http://goo.im/devs/Androguide/Pimp%20my%20Rom/HDPI/PIMP_MY_ROM-v2.1.2-by-Androguide.fr-HDPI.zip
MIRROR MF:
http://www.mediafire.com/?f1yxzf99bndc685
INSTRUCTIONS
Make sure you are running a custom recovery (CWM or TWRP)
- Make sure you have busybox installed, if you don't or if you're not sure, download Busybox Installer from the Play Store (free)
- Make a nandroid backup of your current ROM, just in case
- Wipe cache and dalvik cache in recovery
- Flash PmR in recovery
- A wonderful touchscreen interface will pop-up
(devices need different touchscreen calibration, if the touchscreen doesn't work, use the menu button of your device, select "Calibration Tools" and follow the instructions)
- Follow the on-screen instructions, make your choices between all the different features to Pimp your Rom
- Select "Reboot my device" on last screen (or reboot from recovery) and enjoy
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Encountering installation issues ?
Do the following to fix most errors you might get on some devices :
Open the zip of the rom you are running with winrar or 7zip or whatever (the .zip file that you flash in recovery)
Inside this zip, navigate to : META-INF/com/google/android
Extract the file called "update-binary" and rename it to "update-binary-installer" then close your rom's zip
Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.5.3-by-Androguide.fr.zip)
Do not unzip it, inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
Now copy the "update-binary-installer" file you extracted & renamed from your rom to Pimp My Rom's zip (still in META-INF/com/google/android). Simply drag and drop it into PmR's zip to add it.
Close the zip and flash it
original thread PLEASE OPEN THIS LINK AND HIT THANKS TO HIM
http://forum.xda-developers.com/showthread.php?p=32086131#post32086131131
THANK YOU

Hello thank you for your effort, but please could you tell us what is the difference between this version and the original version??
i have tested the original pimp my rom version on CM9 build3 by arco, and it runs good as long as i don't install any init.d scripts tweaks!! cause if i put it the phone lags to much!!
anyway i will give a try
thank you

Someday, I will try it. Thanks for shared PMR
Sent from my GT-I8150 using xda premium

omid900 said:
Hello thank you for your effort, but please could you tell us what is the difference between this version and the original version??
i have tested the original pimp my rom version on CM9 build3 by arco, and it runs good as long as i don't install any init.d scripts tweaks!! cause if i put it the phone lags to much!!
anyway i will give a try
thank you
Click to expand...
Click to collapse
well there is no differences becuase this is the original file this is not modded version of PMP i just post it here so other can try it,,..
well i tested it by my self i install init.d script in it but my phone is still normal not lagging...its even more smooth <-- for me i guess
also battery life improves i test this 3 days ago before i posted this thread here so.. yeah no problem until now..
im using only CM9 B3 by arco no tweaks except this PMP i love this tweaks LOL..
sorry for the bad english...

Yeah i see, So yesterday i flash it again, and my Phone simply freezs all the time and i cant do nothing except force reboot and resto é my backup!
So i have nstaled nstools program runing conservative governator and noop sheduller! Can it be a conflit because of this? Sorry can you tell me what init.d tweaks haver you turn one?
And Just one Last (noob) question, we can turn on tweaks on init.d and build.prop at the same time right?
Thank you
Sent from my GT-I8150 using Tapatalk 2

omid900 said:
Yeah i see, So yesterday i flash it again, and my Phone simply freezs all the time and i cant do nothing except force reboot and resto é my backup!
So i have nstaled nstools program runing conservative governator and noop sheduller! Can it be a conflit because of this? Sorry can you tell me what init.d tweaks haver you turn one?
And Just one Last (noob) question, we can turn on tweaks on init.d and build.prop at the same time right?
Thank you
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
1. 1st i dont know if they gonna conflict conser. gov. and noop :/
2. in init.d just tick you want to improve or change..
3. yep you can turn on tweaks at the same time
tip dont use GPS fix thingy ex. your rom is for europe firmware and your in asia dont turn it on
might end up on a bootloop just like me (or im missing something well didnt know all the answer)
just dont forget to backup all your files...

omid900 said:
Yeah i see, So yesterday i flash it again, and my Phone simply freezs all the time and i cant do nothing except force reboot and resto é my backup!
So i have nstaled nstools program runing conservative governator and noop sheduller! Can it be a conflit because of this? Sorry can you tell me what init.d tweaks haver you turn one?
And Just one Last (noob) question, we can turn on tweaks on init.d and build.prop at the same time right?
Thank you
Sent from my GT-I8150 using Tapatalk 2
Click to expand...
Click to collapse
you may already installed many app that can interact with hardware. like setcpu, swap or other.
yes you can turn on tweak on init.d and build.prop

Ok guys, yes I have installed nstools, and some others things like acid audio mod and wifix and some others system fonts! So what I did? Wipe everything on my phone, and flash again the cm9 build, and then I have flashed PmR again, and with most of the things, and now I am a happy user again heheh, it's working really good!
So I recommend this thing for at least give it a try
Sent from my GT-I8150 using Tapatalk 2

I need this asap!
How do you guys download things from goo.im?
I tried but it just keep reloading the page and never even start a download...
Can you guys give a mirror?
THe mediAfire mirror isn't workin'...
Dropbox maybE?
Please i need this pretty much BADLY..

TiTAN-O-One said:
How do you guys download things from goo.im?
I tried but it just keep reloading the page and never even start a download...
Can you guys give a mirror?
THe mediAfire mirror isn't workin'...
Dropbox maybE?
Please i need this pretty much BADLY..
Click to expand...
Click to collapse
PMR is out in the playstore as well, try to search for it in the playstore
Sent From Inverted Wonder w/ Xparent ICS Tapatalk

I got it but it does boot loops after I apply and restart the tweaks...
Sent from my GT-I8150 XperiaICE using xda app-developers app

TiTAN-O-One said:
I got it but it does boot loops after I apply and restart the tweaks...
Sent from my GT-I8150 XperiaICE using xda app-developers app
Click to expand...
Click to collapse
One thing you should know, I've tried the flashable version and haven't succeed yet. But I tried the app from Play Store, it works and easier to use

I tried that method and it got me to the bootloop...
Sent from my GT-I8150 using xda app-developers app

work as expected.. :good:
- [ROM][4.1.2] Paranoid Android 2.99 Galaxy W
- [KERNEL] Forfivo kernel Galaxy W KERNEL v2 OC-UV-CFS 06-12-2012
thanks

doesnt work on paranoid jelly bean by camcory, bootloop and app keep fc.

[guide]safest way to over clock sgy merruk 2.5

HELLO AGAIN ALL MY FELLOW galaxy y USERS
Till day before yesterday I had some paranoid thoughts regarding overclocling ... but finally came did some logical thinking and decided to overclock sgy (running Hyperion 8)
As it was my first oc I decided to follow this great guide made by
BiswajitBarman
http://forum.xda-developers.com/showthread.php?p=33879798
Although it is a really nice guide it didn't work properly on Hyperion 8 . I also searched many other guides and videos regarding this but none of them really worked 100% (although one guide did work almost perfectly on Hyperion 7 it failed to work on h8)
Following were the bugs I was experiencing
*root access denied by super su
*unable to underclock below 1.2 ghz
*link to SD problems and root denied
*random reboots
*hot reboot doesn't work and screen freezes if u hit on it and had to pull battery etc etc
So after a whole day of research, trial and error, some suggestions from deadly and others, bricking unbricking flashing via Odin etc etc I finally deviced a fully working easy guide with no bugs to flash meeruk kernel 2.5 on h8 and overclock it to 1.2Ghz :victory:
All the problems stated above are eliminated by this method except for the hot reboot function
Phone still freezes if u hit on it but the reboot works just fine and the phone doesn't take that long to reboot either (about 30seconds )
Other than that no other bugs afaik
NOTE- ALTHOUGH THE METHOD WAS DESIGNED FOR HYPERION .... IF U ARE HAVING SOME PROBLEMS WITH OC ON ANY OTHER ROM ... TRY THIS METHOD IT MAY WORK IF IT (IF IT DOESNT U CAN TELL UR PROBLEM ALONG WITH THE ROM NAME HERE (NOT PM) AND ME IR SOMEONE HERE WILL TRY TO HELP
OK to the procedure now (it may be long but its easy and works perfectly
Note that if u do not follow my instructions properly bricking is guaranteed (or it may not work properly)
THINGS U NEED
superuser.apk (use only this super user)
Kernel Update.zip
Merruk technology2.0.tar
Elite modules.zip
Ext4-Converter-signed.zip
I assume u already have root explorer installed on ur phone (flashing stock is not really necessary but ur choice)
INSTALLATION PROCEDURE
Part 1
*download the paste all the files given above and paste it in the root of your SD card
*copy the super user.apk and paste it in \system\apps\here and set permissions to rw-r-r using root explorer
*now in the same place where u pasted superuser.apk search for the super su.apk (or any other equivalent that u were using) and delete it
*reboot phone
*now open superuser
*go to settings and UNCHECK outdated binary notification
*do not update the version of superuser I provided
Part 2
*go to SD card in root explorer and search for the MerrukTechnology_Pre-2.0.tar I u just downloaded and extract it (hope u pasted all downloaded files directly in SD)
*u will get the boot.img (before that make sure u do not have any other boot.img on the root of ur SD)
*now boot into cwm
*make a backup (imp)
Part 3
*now go to mounts and storage make sure system,data,SD,cache,sdext all are mounted (if not mount them all)
*go back and hot install zip from SD and select the kernel update.zip
*it search for boot.img and install it
*after that go back and check if everything is mounted (this time its 100% necessary that all are mounted so mount them all if they are not mounted)
*now go back and choose install zip from SD and choose Ext4_Converter-signed.zip
*after success wait for a while (30 secs) and hit back (if u get an error, pull battery boot into recovery and do the part 3 again but its unlikely that u will get one)
*now wipe cashe (marok recommends this)
*reboot system
*if u enter a boot loop, awesome go to part 4
If u do not enter a boot loop and if ur system boots..! Something has gone wrong do part 3 again
Part 4
*pull battery and boot to recovery
*u will notice u r in meeruk kernal's cwm recovery
*mount everything
*go rom backup and restore and simply restore the backup u just made
*trust me ur old kernel will not be restored and u will still have meeruk kernel 2.5
*after everything is restored reboot
*u should phone should boot now
*wait and if u r in a boot loop do 3,4 parts again (its unlikely if u followed my procedure carefully)
Part 5
*after phone is booted and all media scanning is complete
*set ur require settings in CPU controle and Chek apply on boot and apply
*u may NOT get a notification saying CPU control has been granted super user permission but it says values applied ... that's fine
*reboot to recovery
*mount everything
*choose zip from SD
*select 1-EliteKernelModules.zip
*reboot system after completion
*now after boot u will notice that link to SD ,CPU control and all root apps are asking superuser permission (lol) grant them
*NOTE- ALWAYS SET MINIMUM FREQUENCY TO 312 MHz (this eliminates random reboots)
* and enjoy
The over clock works like charm for me with the following settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and I can play games like air penguin, subway surfers,raging thunder 2 and many more without lag and without cf3d... I also player armv6 ported nfs shift with just texture reduced without lag
Thanks to marok os for such awesome work on the kernel
pleez consider donating to sir MAROC OS so he can make the kernel even better
=========HOLO-UBUNTU========theme

Also guys overclock only when needed ie while playing games etc or it may cause reboots (although not very often)
=========HOLO-UBUNTU========theme

This worked....thanks for sharing this.....

Nice to know
=========HOLO-UBUNTU========theme

hey sanny,if i have successfully flash the kernel,can i update the superuser?
Sent by a Schoolar Boy ​Question? Better go to [Help Thread] by Deadly

Droid_beginner_student said:
hey sanny,if i have successfully flash the kernel,can i update the superuser?
Sent by a Schoolar Boy ​Question? Better go to [Help Thread] by Deadly
Click to expand...
Click to collapse
Hmm OK I'm not but u can try ... btw use only super user not super su and other equivalents ...
Also this superuser is the best free version right now
Lol even I'm surprised at how crazy the guide seems
=========HOLO-UBUNTU========theme

sanny5 said:
Hmm OK I'm not but u can try ... btw use only super user not super su and other equivalents ...
Also this superuser is the best free version right now
=========HOLO-UBUNTU========theme
Click to expand...
Click to collapse
hmm,i prefer supersu actually..
okay then,i'm starting to flash nao
Sent by a Schoolar Boy ​Question? Better go to [Help Thread] by Deadly

There is a reason why I asked u to replace supersu ... don't use it with this kernel and rom together... u will completely mess up
Added- r u using nemesis???
=========HOLO-UBUNTU========theme

sanny5 said:
There is a reason why I asked u to replace supersu ... don't use it with this kernel and rom together... u will completely mess up
Added- r u using nemesis???
=========HOLO-UBUNTU========theme
Click to expand...
Click to collapse
okay boss,good news here,flawlessly flashed and working
and yes,i'm using "banned custom rom",im a criminal
to do nao,backup,and then try to update binary
Sent by a Schoolar Boy ​Question? Better go to [Help Thread] by Deadly

Droid_beginner_student said:
okay boss,good news here,flawlessly flashed and working
and yes,i'm using "banned custom rom",im a criminal
to do nao,backup,and then try to update binary
Sent by a Schoolar Boy ​Question? Better go to [Help Thread] by Deadly
Click to expand...
Click to collapse
I feel both happy and sorry for u
=========HOLO-UBUNTU========theme

Only bug I found doing this was wifi hotspot no longer works either from the rom settings or by using my normal 3rd party app foxfi
update - fixed by reflashing stock wifi driver

marcussmith2626 said:
Only bug I found doing this was wifi hotspot no longer works either from the rom settings or by using my normal 3rd party app foxfi
update - fixed by reflashing stock wifi driver
Click to expand...
Click to collapse
thanks,i just realized that too
btw sanny,thanks for feel sorry to meh
and check ur pm please
Sent by a Schoolar Boy ​Question? Better go to [Help Thread] by Deadly

So iv tested this for a day now and my findings are as follows
installation - no problems installing
root - works fine
random restarts -none
phone freezes - quite a few times
lag - when loading apps phone stays on black screen for a while sometimes
bugs - when in phone call & screen turns off it will not turn on again through use of proximity sensors and hard to turn back on with buttons it's a bit hit & miss
when phone is in deep sleep or been off a while when you wake it the screen flashes on & off again and takes a few attempts to keep on
recommendations - stay on hells fusion #50 with ext4 file system
to install hells fusion #50 from merruk
Goto cwm
make sure system is mounted
flash hells fusion #50 (just step 2 install hells fusion)
Restart to recovery
goto advanced restore
restore system (you only need to restore system not data boot or cache) from nandriod backup you did before you you flashed merruk
restart
failing to restore system will mean you will not have root

Lol u just reported ur issues with the kernel
If u have issues with guide or non kernel related bugs after installation (like root access denied etc) report here ..
If u have issues with kernel report to the kernel dev
U should know that the kernel is not a stable oc and the Dev is working really hard to make it more stable for us
So instead of suggesting different kernels (against rules) y don't u encourage the dev by appertaining his hard work
And this is one and the only oc kernel that is there for sgy right now! !! Do u want to loose that development too?
Pleez be supportive to devs here
=========HOLO-UBUNTU========theme

I'm afraid to overclock 1,2Ghz, what effect after overclocking.....? effect positive n negative...
:good:

Well even though there is a popular misconception that oc reduces the durability of the processor ... I dont think its entirely true
because ur phone is not constantly running on the Max frequency ... it only uses wat is needed
Also the processors are tested to run very much beyond the specified frequency without frying up.. well atleast good processors are tested like that
Samsung has used a good processor itself in all its phones so oc will not fry up the processor
However it may or may not reduce the life of processor of phones of local campanies like micomax etc
Also reat the previous post (the post above yours
=========HOLO-UBUNTU========theme

After tried your steps in hyperion in about phone it says merruk kernel....but i am seeing only two frequency values in cpu control which 312 and 832....what i have done wrong????? Can u tell me plz...
Sent from my GT-S5360 using Tapatalk 2

Suresh9488 said:
After tried your steps in hyperion in about phone it says merruk kernel....but i am seeing only two frequency values in cpu control which 312 and 832....what i have done wrong????? Can u tell me plz...
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Reflash the kernel - make sure system is mounted before you flash

marcussmith2626 said:
Reflash the kernel - make sure system is mounted before you flash
Click to expand...
Click to collapse
Still no luck.....same thing
Sent from my GT-S5360 using Tapatalk 2
---------- Post added at 05:31 PM ---------- Previous post was at 04:52 PM ----------
Is sdcard ext4 is compulsary to flash the kernel.....????
Sent from my GT-S5360 using Tapatalk 2

Suresh9488 said:
Still no luck.....same thing
Sent from my GT-S5360 using Tapatalk 2
---------- Post added at 05:31 PM ---------- Previous post was at 04:52 PM ----------
Is sdcard ext4 is compulsary to flash the kernel.....????
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
Yes its compulsory! !!
Now obvious that u didn't follow my steps :sly:
=========HOLO-UBUNTU========theme

[ROM]Micromax A210 Canvas 4 Stock ROM (Rooted)

Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed GAPPS since it's size was too large to upload with the ROM but that too is uploaded as patch in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery.
Clockwork Mod Recovery
Good news, CWM recovery is now available for Canvas 4, here is the thread to download it, I have already tested it and it works, just copy to SD Card, then flash with Mobile Uncle Tools..
Or see the full tutorial here.
As soon as you flash CWM recovery, enter it and Make a nandroid backup of your phone only then try this ROM.
WARNING/Disclaimer -
Flash on your own responsibility. I do not own this phone so am not able to test it.
I am not responsible if you brick your device!
Only Advanced people who can recover from soft bricks are recommended to flash this!
Click to expand...
Click to collapse
Flashing Instructions:
Download the Zip files given below then place the zip file in SD Card
Reboot to CWM recovery
Wipe Data/Factory Reset
Wipe Cache
Install zip from SD Card and Select the ZIP file given here
Install GAPSS Patch given here
Goto-Advanced and Clear Dalvik Cache
Reboot...
Done and enjoy:good:
Click to expand...
Click to collapse
Credits to droidiser for providing the download link.
Original ROM link
Click to expand...
Click to collapse
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM (Updated)
GAPPS Patch
No need to replace script anymore, i have updated the ROM's zip file and re-uploaded...
I have fixed the Updater script, so now you can flash this zip through CWM.
You just need to replace the updater-script & update-binary in the Downloaded zip file with the ones attached.
How-To:
Download the ROM's zip file, then open with WinRar
Goto-> META-INF -> com -> google -> android -> and there you will see the old updater-script
Now download the new updater script & update-binary attached here, extract both to your computer then drag it to this location of the zip file, In the message that appears, click OK you are done.
Now you can flash the Zip file as mentioned above.

flash in Canvas HD
hi Bro, can I flash this stock rom of Canvas 4 in my Canvas HD??

Not tested on Canvas HD, but you can give it a try since both phones have exactly same hardware including the chipset.. but make sure you make a Nandroid backup of your phone and then try this..
Flashing instructions would be:
Download and copy zip to sd card
Reboot to CWM recovery
Wipe Data/Factory reset
Wipe Cache
Goto mounts & storage and format System
Goto advanced and clear dalvik cache
Apply zip from sd card and flash this rom
Once done, clear dalvik cache again
Reboot
All the best let me know what happens... :good:
Sent from my Micromax A110 (Canvas 2) using xda developers app

CWM Recovery for CANVAS 4 A210
ibshar said:
Not tested on Canvas HD, but you can give it a try since both phones have exactly same hardware including the chipset.. but make sure you make a Nandroid backup of your phone and then try this..
Flashing instructions would be:
Download and copy zip to sd card
Reboot to CWM recovery
Wipe Data/Factory reset
Wipe Cache
Goto mounts & storage and format System
Goto advanced and clear dalvik cache
Apply zip from sd card and flash this rom
Once done, clear dalvik cache again
Reboot
All the best let me know what happens... :good:
Sent from my Micromax A110 (Canvas 2) using xda developers app
Click to expand...
Click to collapse
Hello,
I just saw this today only It was reported that there is no custom recovery. I do not know whether it is available here and did not google it. I used "MTK tool and obtained the recovery image and I am porting here both the custom recovery and Patched up boot.img files provided by the MTK Droid tool 2.4.8.
It may be useful for cooking custom Roms. The CWM provided is 5.5.0.4.. You. have to flashed through SP Flashable Tool by ticking only the recovery. and again only boot.img the remaining items except preloader has to unticked.
After Rooting with Zen701hd root tool I used the MTK Droid tool 2.4.8 to Re-Root the phone and istall the Super Su as the Zen tool only rooted the p;hone and failed to install the super user. Latter I updated it with Update 1.51 SuperSu. My phone is superbly functioning.
When I ported the zip file XDA server says no security token and I could not port it I am Porting the url. here
https://docs.google.com/file/d/0B6mi3aQy8tz9MldBYUlCdkxIRW8/edit?usp=sharing
https://docs.google.com/file/d/0B6mi3aQy8tz9XzhyZmFmQUtqWVk/edit?usp=sharing
---------- Post added at 09:46 AM ---------- Previous post was at 09:18 AM ----------
ibshar said:
Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed NFSS_EADRM apk since it's size was too large to upload with the ROM but will soon upload that too in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery, but unfortunately there is no custom recovery available for Canvas 4 yet, hopefully you can use it once it's out.. For now only advanced users may use it through fastboot.
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM
Click to expand...
Click to collapse
Hello,
I am getting error zero when I flashed this Rom and == ( Error status 0).
Any further guidance please.
Regards,

Could you take a logcat of the error please and post it here..
Sent from my Micromax A110 (Canvas 2) using xda developers app

IMEI Vanished
ibshar said:
Could you take a logcat of the error please and post it here..
Sent from my Micromax A110 (Canvas 2) using xda developers app
Click to expand...
Click to collapse
I have downloaded and used the custom firmware.
I used the MTK tool to root and install custom recovery.some weeks before.
When I installed this rom soft brick happened to my phone, it could not boot. It stopped for nearly 30 minutes in the boot lago. Then I used the Customback up to restore my phone.
This is my experience.
My IMEI also vanished. Somehow I could restore the IMEI by copy and paste procedure using the Root explore of the Device/nvram file.
May be is it because I was having 5.5.0.4 recovery as installed by the MKDroid Tool 2.4.8 or by any other means.
Any similar experience.

ibshar said:
Could you take a logcat of the error please and post it here..
Sent from my Micromax A110 (Canvas 2) using xda developers app
Click to expand...
Click to collapse
How to take a log cat and port here I am just a learner. Please .
send from Spice Mi- 535

puduraja said:
How to take a log cat and port here I am just a learner. Please .
send from Spice Mi- 535
Click to expand...
Click to collapse
Hi, I think i found the cause of the error you got. No need for logcat, can you just tell me the mount partitions for /system directory. It needs to be updated in the updater-script of the zip file.
Use this for reference: http://forum.xda-developers.com/showthread.php?t=2377989

mount partitian
ibshar said:
Hi, I think i found the cause of the error you got. No need for logcat, can you just tell me the mount partitions for /system directory. It needs to be updated in the updater-script of the zip file.
Use this for reference: http://forum.xda-developers.com/showthread.php?t=2377989
Click to expand...
Click to collapse
Dear Brother,
It is to big for me to digest and follow. I can us the MkDroid tool to get the block. It is ok. I am not finding any fault with the Rom. I narrated my experience. Many user of the phone is like me. Just I attempted and failed. I will send you the Droid tool block copy to night when
I am free.
Thanks

puduraja said:
Dear Brother,
It is to big for me to digest and follow. I can us the MkDroid tool to get the block. It is ok. I am not finding any fault with the Rom. I narrated my experience. Many user of the phone is like me. Just I attempted and failed. I will send you the Droid tool block copy to night when
I am free.
Thanks
Click to expand...
Click to collapse
Actually all i need is for you to open terminal emulator or through ADB to run the following commands and post the result here.
Commands:
Code:
mount
Code:
cat /proc/partitions
:good:

ibshar said:
Actually all i need is for you to open terminal emulator or through ADB to run the following commands and post the result here.
Commands:
Code:
mount
Code:
cat /proc/partitions
:good:
Click to expand...
Click to collapse
Dear Brother,
Find below the attached terminal emulator output.
At this time of mount I am in stock Rom . Rooted with Zentool and by MTK DROID TOOL. SUPERSU was updated from 1.51
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my A210 using xda app-developers app

You need to add a space after cat command then /proc/partitions
Sent from my Canvas 2 using XDA Developers App

ibshar said:
You need to add a space after cat command then /proc/partitions
Sent from my Canvas 2 using XDA Developers App
Click to expand...
Click to collapse
Please find the log cat as desired by you.
Sent from my A210 using xda app-developers app

Sorry but still dont see the mapping.. can u also post the output of:
ls -l /
Sent from my Canvas 2 using XDA Developers App

ibshar said:
Sorry but still dont see the mapping.. can u also post the output of:
ls -l /
Sent from my Canvas 2 using XDA Developers App
Click to expand...
Click to collapse
Please find the log. Sorry I just get time only on Sundays.
Sent from my A210 using xda app-developers app

CWM Recovery for canvas 4
ibshar said:
Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed NFSS_EADRM apk since it's size was too large to upload with the ROM but will soon upload that too in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery, but unfortunately there is no custom recovery available for Canvas 4 yet, hopefully you can use it once it's out.. For now only advanced users may use it through fastboot.
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM
Click to expand...
Click to collapse
CWM Recovery for Canvas 4 Here
http://forum.xda-developers.com/showthread.php?t=2412817

Hi,
Can we use A116 Custom rom for Canvas 4 ? it is possible ?
Thanks

puduraja said:
Please find the log. Sorry I just get time only on SundaysView attachment 2195282.
View attachment 2195285
Sent from my A210 using xda app-developers app
Click to expand...
Click to collapse
Thanks, got what i needed,I will upload the modified file tomorrow.. And it seems there is a working CWM recovery available, so users are advised to make a nandroid backup of the system before flashing this rom.

puduraja said:
Please find the log. Sorry I just get time only on SundaysView attachment 2195282.
View attachment 2195285
Sent from my A210 using xda app-developers app
Click to expand...
Click to collapse
I have fixed the installation script, read the first post and download the new updater-script, follow the instructions and it will work.. Let me know how it goes.. :good:

ibshar said:
Hi,
I have uploaded the ROOTED Stock ROM of Micromax A210 Canvas 4 (JB 4.2.1). I have just removed NFSS_EADRM apk since it's size was too large to upload with the ROM but will soon upload that too in a flashable zip.
What i did was cook it with Android Kitchen, added Root & Busybox & zipalign all the APK. That's it. :angel:
This is a flashable zip which can be applied from recovery.
Clockwork Mod Recovery
Good news, CWM recovery is now available for Canvas 4, here is the thread to download it, I have already tested it and it works, just copy to SD Card, then flash with Mobile Uncle Tools..
Or see the full tutorial here.
As soon as you flash CWM recovery, enter it and Make a nandroid backup of your phone only then try this ROM.
So people who have bought this phone and wanna experiment with it, try this and let me know how it works out for you.. :fingers-crossed: :good:
Download
Canvas 4 ROM
I have fixed the Updater script, so now you can flash this zip through CWM.
You just need to replace the updater-script in the Downloaded zip file with this one: Updater-Script
How-To:
Download the ROM's zip file, then open with WinRar
Goto-> META-INF -> com -> google -> android -> and there you will see the old updater-script
Now download the new updater script given above, and drag it to this location of the zip file, In the message that appears, click OK you are done.
Now you can flash the Zip file as mentioned above.
Click to expand...
Click to collapse
I couldnt flash your rom in my Micromax canvas 4 (A210)... it says Update aborted..... Plz help me.. I messed up with my camera and i cant get it back.. please upload working rom...

[ROM][JB 4.2.2][JULY 26] AoCP 5.8 - The Collective

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOCP 6
Android Open Collective Project​
This ROM was ported from the Xperia Neo forums. It has been created by arch_saiful. I just ported this amazing work so we can enjoy it's rich experience on our device. I have briefly tested the ROM on my device and found out great performance and speed. The ROM must be extremely stable and has big performance potential. I share it as a beta. It's good for everyday use but you are testing it as a beta in the current stage. Please test and report bugs so I can improve the ROM and bring it to it's fully optimal potential on our device. It is based on CM10.1 compiled for the Xperia Neo V. It has been succesfully ported today to our device. The ROM uses Coderzs 3.0.62 kernel (Thanks ).​
Original ROM for the Sony Ericsson Xperia Neo V here.
Bugs:
:fingers-crossed:Please PM me with bugs. I have briefly tested it due to lack of time. Bugs will be posted here.
WiFi issue spotted. It looks like the wifi option is grayed out on some handsets. Working on it. - Fixed in v6​
Root access is denied on many handsets. Issue solved. Just install UPDATE-SuperSU-v1.34.zip via recovery (see downloads).​
How to install:
For S-OFF:
1. Boot to Recovery
2. Factory Data reset
3. Wipe Dalvik
4. Format System
5. Install ROM Zip from Sdcard
6. Install Google Apps​
7. Install UPDATE-SuperSU-v1.34.zip for root access (see downloads).
For locked Bootloaders:
1. Boot to Recovery
2. Factory Data reset
3. Wipe Dalvik
4. Format System
5. Install ROM Zip from Sdcard
6. Install Google Apps
7. Flash kernel (inside zip "boot.img") via fastboot.
8. Install UPDATE-SuperSU-v1.34.zip for root access (see downloads).​
​
Downloads:
AoCP v6
Google Apps
To gain root access install: UPDATE-SuperSU-v1.34.zip
MD5 Hashes for the ROM's zip:
(lol not yet)​

Credits and Thanks
Google For Android and AOSP
CyanogenMod
The Android Collective Project for creating this amazing rom
Arch_Saiful Who Made this for the Xperia Neo V
CedArctic Who Ported this to the Desire HD
Cnote74 who basically taught me how to port
Coderzs for helping me port and for his kernel
Elginsk8r for the kernels
Johnsondr80
...Awesome... for his Awesome Beats Package
Team Inferno:
Saranhai (Thanks for testing btw )
0.0
Synthetic.Nightmare
Albinoman887 (for his CyanogenMod Base)
Mickeyaso (Tester)
Mymeatb18 (Tester)
＿ⅠSmile™^_^ (for the .69 kernel)
WeekendsR2short (For helping me
Chainfire (For his SuperSU)
AuxLV (for his fstrim file)
I annoyed lot of people. Give them thanks because without them this ROM wouldnt be working lol.​

BUGS / NOTES
- You have to install to internal memory, apps 2 sd doesn't work, its a kernel issue
Do this to install to internal memory all the time
> Install Rom toolbox from the Play Store
> Open it and press apps2sd
> Pick internal storage
> This works for some reason.... I don't even know, it just did.
- No headset overheat (Thanks to coderzs)
- Kernel is a bit outdated and unstable, but I'll update it with a newer one later (People help me out by flashing kernels and tell me if wifi works)
- You have to flash that supersu package for root rights
- Battery life is decently good.
- Should be fast and smooth
This Includes ...Awesome...'s AwesomeBeats v5 premium
- Awesome Beats is working, execpt I dunno what happened to the equalizer lol.
- You have to activate the Beats though
> To activate
>Go to terminal
> Type "su"
> Type "sysrw"
> Type "awesome"
> After the Awesome Picture text or whatever shows up, Reboot
> Enjoyyyy
- HOPEFULLY Everyone enjoys this!​

KERNELS!
I think this is the .58 kernel, someone try it please --> http://goo.gl/NflO9f ---> Random Reboots
This is coderzs .61 kernel --> http://goo.gl/70fk4i ---> Phone and other things keep crashing + Wifi doesnt work.
I dunno if any of these are flashable, I tried making them into a flashable zip but havent tried cause I suck
TESTING THINGYS
Someone open up the rom, then delete the "boot.img"
Then paste this boot.img there --> http://goo.gl/hpt9Ub
Then re-flash the rom. If it boots up YAY!
If it does boot up, then tell me if wifi works. If yes, then every single thing works on this rom. If not then, I gotta keep messing aroud

Looks pretty good!!!

Can someone test out the battery life. The guy who ported this to the dhd said after 2 days of light usage he was still at 75
Sent from my HTC Glacier using xda app-developers app

Awesome Bro and thanks for the shout out. Must feel good to start a thread in the dev section
Sent from my HTC Glacier using xda app-developers app

mymeatb18 said:
Awesome Bro and thanks for the shout out. Must feel good to start a thread in the dev section
Sent from my HTC Glacier using xda app-developers app
Click to expand...
Click to collapse
lol yeah it does
And If anyone is using this rom, can they test out some things for me? Like flashing other kernels and seeing if the wifi works?

WiFi works perfectly for me actually don't see any bugs other than usual 4.2.2 things. Great job Bro its nice too I like the theme
Sent from my HTC Glacier using xda app-developers app

mymeatb18 said:
WiFi works perfectly for me actually don't see any bugs other than usual 4.2.2 things. Great job Bro its nice too I like the theme
Sent from my HTC Glacier using xda app-developers app
Click to expand...
Click to collapse
lol yeah wifi works, but if you flash another kernel, it won't work

Good job on the port, N_otori0us_!
Im surprised you got this rom booting with the 62 kernel. Im wondering how did you?

arch_saiful doesn't "own the rights" to this lol. The Collective maintains the source
Sent from my SGH-T999 using Tapatalk 4 Beta

Brightness 0 - Plz help
I flashed this devil y'day and it's been great so far, everything works for DD.
It just happened to me that I mistakenly changed the brightness to 0 and my USB Debugging hasn't turned on.
So, I'm in fix, please help me with this, maybe a flashable to just override the brightness setting or something.

rushfunn said:
I flashed this devil y'day and it's been great so far, everything works for DD.
It just happened to me that I mistakenly changed the brightness to 0 and my USB Debugging hasn't turned on.
So, I'm in fix, please help me with this, maybe a flashable to just override the brightness setting or something.
Click to expand...
Click to collapse
Reflash the ROM. A dirty flash though.
Can someone try the coderzs .61 kernel... I dunno if I'm allowed to make a flashable zip, so just replace the boot.IMG in the ROM zip
Sent from my HTC Glacier using xda app-developers app

Doughnut643 said:
Good job on the port, N_otori0us_!
Im surprised you got this rom booting with the 62 kernel. Im wondering how did you?
Click to expand...
Click to collapse
By annoying the living hell out of people with questions
Sent from my HTC Glacier using xda app-developers app

N_otori0us_ said:
Can someone try the coderzs .61 kernel... I dunno if I'm allowed to make a flashable zip, so just replace the boot.IMG in the ROM zip
Sent from my HTC Glacier using xda app-developers app
Click to expand...
Click to collapse
I flash that kernel, the rom works fine, no random reboots, no screen tearing, it works great, Iam only missing halo.

What is the benefit of flashing .61 kernel here? ROM already comes with .62.
Does .61 heats with headphone or not?
Sent from my myTouch 4g
---------- Post added at 12:09 PM ---------- Previous post was at 12:07 PM ----------
Well I just got lucky without any flash. I did screen clicks at approximate locations for several times and finally put it in auto
Sent from my myTouch 4g
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
Does FM Radio work for anyone? FC for me ...
Sent from my myTouch 4g

tested...man hell of a job!
I knew u will release one rom which fixes all annoying bugs becouse u are true daily user of our phone and you know what people want!:good:
I will report if something pops up

leo32x said:
I flash that kernel, the rom works fine, no random reboots, no screen tearing, it works great, Iam only missing halo.
Click to expand...
Click to collapse
Ill see if i could mess around with that
rushfunn said:
What is the benefit of flashing .61 kernel here? ROM already comes with .62.
Does .61 heats with headphone or not?
Sent from my myTouch 4g
---------- Post added at 12:09 PM ---------- Previous post was at 12:07 PM ----------
Well I just got lucky without any flash. I did screen clicks at approximate locations for several times and finally put it in auto
Sent from my myTouch 4g
---------- Post added at 12:19 PM ---------- Previous post was at 12:09 PM ----------
Does FM Radio work for anyone? FC for me ...
Sent from my myTouch 4g
Click to expand...
Click to collapse
i forgot I even had spirit in there .
The .61 has no headset heat, it has no apps to SD problems like the .62
And it also doesn't have the screen brightness issue. You can try and replace it by swapping boot.imgs with Team Infernos ShenduOS ROM.
JukiCro said:
tested...man hell of a job!
I knew u will release one rom which fixes all annoying bugs becouse u are true daily user of our phone and you know what people want!:good:
I will report if something pops up
Click to expand...
Click to collapse
Thanks man!
Sent from my HTC Glacier using xda app-developers app

Someone Delete the boot.img in the rom zip and replace it with this one --> http://goo.gl/hpt9Ub
Tell me if WIFI works; or even if it boots up Thanks random person.