htc one x problem - HTC One X

hello
i use the one click method to root my device and the the supersu icon appear but the program cant get super user like orbot and other
so i try other methods and the first step is to unlock bootloader i do all steps but in the end nothing happen
any ideas plz

malnazzal said:
hello
i use the one click method to root my device and the the supersu icon appear but the program cant get super user like orbot and other
so i try other methods and the first step is to unlock bootloader i do all steps but in the end nothing happen
any ideas plz
Click to expand...
Click to collapse
so you have unlocked your bootloader? however wrong section where to ask

im new i cant post any where and the bootloader dosnt unlock coz the final step dosnt appear to me

malnazzal said:
im new i cant post any where and the bootloader dosnt unlock coz the final step dosnt appear to me
Click to expand...
Click to collapse
change the browser to get into the htcdev.com

look i enter the site and i do all steps but when i write
fastboot flash unlocktoken Unlock_code.bin
this message appear in dos
sending 'unlocktoken' (0 KB)...
OKAY [ 0.008s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.222s]
finished. total time: 0.230s

malnazzal said:
look i enter the site and i do all steps but when i write
fastboot flash unlocktoken Unlock_code.bin
this message appear in dos
sending 'unlocktoken' (0 KB)...
OKAY [ 0.008s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.222s]
finished. total time: 0.230s
Click to expand...
Click to collapse
that's ok, you need now to select yes on your phone by using vol up and press power

that is the problem nothing happen in the phone it still in fastboot screen
i know it must appear a message and chose yes but there no message

malnazzal said:
that is the problem nothing happen in the phone it still in fastboot screen
i know it must appear a message and chose yes but there no message
Click to expand...
Click to collapse
how could it be possible? you should try again all the steps provided in the htcdev site

Related

EVO 3D unlocking help

when i get to the last step on htcdev.com to unlock the bootloader. i type "fastboot flash unlocktoken Unlock_code.bin" but when i got back to my phone i dont have the disclaimer to unlock the phone. im following directions correctly and everything says on computer that it went through. any ideas??
C:\android>fastboot flash unlocktoken unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.156s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ -0.000s]
finished. total time: 0.156s
i get this but nothing on my phone....
Same problem.
This is also happening to me. I unlocked my own Evo 3D with this method and had no problems, but ran into this same issue trying to unlock my son's, which he just got for Christmas. I've confirmed Hboot version is 1.5. Any help with this would be much appreciated.
*Update* Fixed!
I did some research and found the solution! I've confirmed that this works for me. Basically, you have to install the old RUU version 2.08.651.2 because something in 2.08.651.3 borks the HTC unlock. Here is the original post I found:
http://htcevohacks.com/htc-evo-3d-cheat-sheet/#comment-31513
...and here is a link to a thread with the RUU 2.08.651.2 download:
http://forum.xda-developers.com/showthread.php?t=1225737
OK this is not the answer but I can confirm that htc dev unlocking method is working perfectly for hboot 1.53.0007

[Q] Can't unlock

I got back my phone yesterday from HTC and the device sais "Locked" rather than "Relocked".
I tried to unlock my phone again, but I can't.
If I type fastboot devices I get response that my phone is connected, however if I type "fastboot oem get_identifier_token" or anything else I get an error:
E:\androidflash\Fastboot>fastboot oem get_identifier_token
... FAILED (remote: (00000008))
finished. total time: 0.002s
Click to expand...
Click to collapse
or
E:\androidflash\Fastboot>fastboot flash unlocktoken Unlock_code.bin
sending 'unlocktoken' (0 KB)... OKAY [ 0.009s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.220s
Click to expand...
Click to collapse
Can anyone help me?
Sil
Don't laugh, but try plugging into a different USB. It could be that simple.
requiem11 said:
Don't laugh, but try plugging into a different USB. It could be that simple.
Click to expand...
Click to collapse
Oh wow, it really worked. Thanks!
Silgrond said:
Oh wow, it really worked. Thanks!
Click to expand...
Click to collapse
I know, crazy. Glad it worked out.

Can you please help me?

Hello here is my problem.
I run my HOX on hboot 1.39 and the latest CMW but i cant enter it from bootloader i get the Red triangle and power+volume up just reboots the phone again. I took factory reset in bootloader the phone loads normal but after i unlock the lock screen i get white backround with HTC text. I dont know what to do can you give me some advices?
Reflash the custom CWM recovery or TWRP recovery
Fastboot flash recovery name-of-recovery.img
Fastboot erase cache
C:\Users\Simon\Desktop\htc one x cyanogenmod>fastboot devices
HT23WW136148 fastboot
C:\Users\Simon\Desktop\htc one x cyanogenmod>fastboot flash recovery openrecover
y-twrp-2.3.1.0-endeavoru.img
sending 'recovery' (6470 KB)...
OKAY [ 0.831s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.043s
It fails everytime i try to flast new/same recovery, and i still get the red trianle. Now phone works normal when i took factory reset in bootloader but the signal and wifi doesnt work.
Is the bootloader unlocked?
Sent from my One X using xda premium
I bet its locked
Its says that bootloader is relocked. And then i tried to get the new unlock code, but when i try to get the token it say command error.
Fastboot flash unlocktoken unlock_code.bin
OKAY [ 0.126s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Unknown error))
finished. total time: 49.707s
Check successfully.....did you see on the phones screen the option to unlock the bootloader ?
Yes, thank you so much for your help! :victory:
Good ... now you can continue

just wanted to update hboot

hey guys i just wanted to update hboot and now im stuck -.-
im german and my english is not the best...sry for that
but i hope one of you guys is able to help me with my phone:good:
phone is a One X brandet O2 ger
Cid is O2___102
Hboot is 0.94
radio 1.1204.90.13
i had a venom rom viper x (from oct 2012)
i wanted to update hboot and there was a step which said relock the device. yeah that was done no prob..
now i´ve a locked device (but i´ve got the unlock token from htc)
how to use that? already tried to put that into my phone via fastboot but there comes a error message
sending 'unlocktoken' (0 KB)... OKAY [ 0.009s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.224s
Click to expand...
Click to collapse
i think im not able to figure that out without any help
first i think to unlock the device again and after that just update hboot and then flash cm 10.1
thx for your help
To upgrade your Hboot... You first need to lock your device and then flash the firmware.zip!
After than unlock your device and then flash custom recovery and then install CM10.1
Post the result of the following code:
Code:
fastboot getvar version-main
If there's a RUU for your device, then you can go back to stock and then update to JB via OTA update if you want..?!
sending 'unlocktoken' (0 KB)... OKAY [ 0.009s]
writing 'unlocktoken'... FAILED (remote: unlock token check failed)
finished. total time: 0.224s
Click to expand...
Click to collapse
Generate a new unlock_code.bin file from htcdev.com and then try again!
vin4yak said:
To upgrade your Hboot... You first need to lock your device and then flash the firmware.zip!
After than unlock your device and then flash custom recovery and then install CM10.1
Post the result of the following code:
Code:
fastboot getvar version-main
If there's a RUU for your device, then you can go back to stock and then update to JB via OTA update if you want..?!
Generate a new unlock_code.bin file from htcdev.com and then try again!
Click to expand...
Click to collapse
+1 .. Here's the firmware thread >> http://forum.xda-developers.com/showthread.php?t=1957376 <<

finding the correct RUU

hello,
I own a 32 GB HOX and I need to completly stocked my phone using the RUU
I just dont know which one I have to choose
my CID is : HTC_044
Thank you !
Stop making threads with different stories. Its confusing.
Who wins a hox that does not work. Return it and get a new one !!!
http://forum.xda-developers.com/showthread.php?t=2374320
Mr Hofs said:
Stop making threads with different stories. Its confusing.
Who wins a hox that does not work. Return it and get a new one !!!
http://forum.xda-developers.com/showthread.php?t=2374320
Click to expand...
Click to collapse
I meant 'own'
I just noticed it .
That clears things up !
Fastboot getvar version-main
That will tell you the number of the ruu you need
Mr Hofs said:
That clears things up !
Fastboot getvar version-main
That will tell you the number of the ruu you need
Click to expand...
Click to collapse
Ok than
I already used the right RUU and Run it
Now after using in the RUU the HOX immediately boots into bootloader
I tried to flash a new boot with no success
C:\Users\Shavit\Desktop\One_X_All-In-One_Kit_v2.3\Data>fastboot flash boot boot.
img
sending 'boot' (5200 KB)...
OKAY [ 0.651s]
writing 'boot'...
FAILED (remote: not allowed)
finished. total time: 0.854s
Click to expand...
Click to collapse
But what is now exactly your goal, i see so many different things everywhere....
But to answer this question :
A boot.img (the kernel) can't be flashed with a locked/relocked bootloader, after you ran the ruu your bootloader is either locked or relocked and you need to unlock it first to be able to flash anything !
Mr Hofs said:
But what is now exactly your goal, i see so many different things everywhere....
But to answer this question :
A boot.img (the kernel) can't be flashed with a locked/relocked bootloader, after you ran the ruu your bootloader is either locked or relocked and you need to unlock it first to be able to flash anything !
Click to expand...
Click to collapse
First of all thank you !
my goal is just to be able to use the DAM PHONE
Currently my bootloader is LOCKED and I can't manage to unlock it
C:\Users\Shavit\Desktop\One_X_All-In-One_Kit_v2.3\Data>fastboot flash unlocktoke
n Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.130s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Unknown error))
finished. total time: 4.747s
Click to expand...
Click to collapse
THis happens after choosing the 'YES' option in the HOX
And it stays relocked after a reboot ?
Then get a new code at the HTC dev site ....maybe that helps
Mr Hofs said:
And it stays relocked after a reboot ?
Then get a new code at the HTC dev site ....maybe that helps
Click to expand...
Click to collapse
Even after a reboot it stays ***LOCKED***
I tried to get a new code
A different error this time
C:\Users\Shavit\Desktop\One_X_All-In-One_Kit_v2.3\Data>fastboot flash unlocktoke
n Unlock_code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.011s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
FAILED (status read failed (Too many links))
finished. total time: 3.501s
Click to expand...
Click to collapse
I tried agagin with another Unlock_Code.bin and I get a different every time
FAILED (status read failed (Unknown error))
FAILED (status read failed (Too many links))
every time a different one
Any help with that ?
Well actually no ! If the token get flashed to the phone and you see the unlock screen its all correct. If it stays unlocked like yours do then i can't do anything unfortunately

Categories

Resources