Hello everbody
I tried to update my galaxy Nexus to 4.1.2 but it only shows me the 4.1 update which i already installed like 6 times or so... Did anybody else experience this kind of problem? The phone's id is JRN84D takju.
Related
Hi
I have purchased Galaxy Nexus GSM from Ebay recently. System was updated to 4.0.4 ICS till now and suddenly yesterday I got
new update is available and downloaded notification. I think its 4.1.1 JB
I am upgrading my system now... and yes its upgraded !
New 4.1.1 JB
Have a look at the attachment for more details on baseband , kernel version and F/W version... I'm too lazy for typing..
We know. Rollout started a couple days ago.
Do you think there is a difference between the yakju build and the yakjuxw ?
Sent from my Galaxy Nexus using Tapatalk 2
Droid Firmwares
ZSDME1 Android 4.1.2 Jelly Bean Official Firmware for Galaxy Note 2 N7100
may 31, 2013 by suhani mistry
Translate:
Samsung Galaxy Note 2 GT-N7100 received another* Android 4.1.2 Jelly Bean official firmware update recently. Samsung is rolling out an OTA update about the ZSDME1 Android 4.1.2 Jelly Bean firmware for Galaxy Note 2 N7100. Many of Galaxy Note 2 N7100 users live in the supported countries including Hong Kong already received this firmware update on their device through OTA update. The official Samsung utility KIES is currently unavailable to install the update. Now, if you don’t received any OTA update notification to update your Galaxy Note 2 N7100 To ZSDME1 Android 4.1.2 Jelly Bean firmware then follow our tutorial for a manual update. Please note, this tutorial don’t require a custom recovery such as CWM recovery or a rooted Galaxy Note 2 N7100 because to install this firmware we will use ODIN utility. After installing official firmware ZSDME1 Android 4.1.2 Jelly Bean you can always root your Galaxy Note 2 N7100 with the help of proper rooting method.
Continue reading this page to install ZSDME1 Android 4.1.2 Jelly Bean official firmware update in Galaxy Note 2 N7100 using ODIN. However, before moving towards installation of firmware we recommend you to backup your apps and other personal data. Although, installing official firmware restore everything if your Android device was running on official firmware before flashing this latest ZSDME1 Android 4.1.2 Jelly Bean firmware but it always better to have a backup. Also manual backup let you move your personal data from one manufacturer to another; for example you can use Samsung Galaxy Note 2 data to HTC Butterfly. In below written tutorial we not only direct you towards a step-by-step guide to update Galaxy Note 2 N7100 to ZSDME1 Android 4.1.2 Jelly Bean using Odin but also give you necessary tips to safe guard your data.
Android 4.1.2 Jelly Bean ZSDME1 Firmware Details:
PDA: N7100ZSDME1
CSC: N7100OZSDME1
Version: 4.1.2
Date: May, 2013
Warning!
We at Droid Firmwares write tutorial to help out fellow Android users but all this guide are educational purpose only. You should try this guide at your own risk. Neither we nor the developer should be responsible if your Android device experience a damage after following this tutorial. Also remember,this guide is only applicable for Galaxy Note 2 N7100. Don’t try this guide in any other Android device. It may hard brick your device.
Pre Requisites:
As there is always some risk involve while you install anything other than what you have presently. It’s always recommended to follow our pre-requisites to stay safe.
Backup your important data such as SMS, Call Log, Contacts, APN and MMS settings. You can follow our Android backup guide for this. It’s also a good idea to backup your internal memory content to external SD card, specially if you need to perform any wiping task during or after installation process.
If your device turn off during the installation process unless explicitly mentioned on this tutorial then it may experience a hard brick. That’s why, it’s good idea* to check battery percentage before following this tutorial. Usually, the phone should have 60% or more power when you flash a custom ROM or firmware. Firmware installation can be done with 25% or more power when the device is connected to computer using USB and get charge through it. It will be fine to have 30% or more if you going to root a firmware. Learn How to Check Battery Percentage in Android phones.
USB Debugging mode should be turned of if it’s disabled otherwise you can’t transfer file using USB cable. Learn: How to Enable/Disable USB Transfer on Android Devices.
Another thing you should note that nearly all our tutorial at Droid Firmwares is for carrier unlocked and bootloader unlocked devices. You shouldn’t try to install it on a locked device unless explicitly mentioned anywhere in tutorial.
Download Galaxy Note 2 N7100 Latest USB Drivers
Since you will need to connect your smartphone to your PC, so you will need to have your Galaxy Note 2 N7100 drivers installed on your computer. Visit our USB Driver Download page. If you can access your mobile content in your PC when both are connected then you already have it.
So, you have done everything that we mentioned above, right! Now, as you have taken necessary precaution, you are ready to move towards next page where we summed up detail instruction on how to install ZSDME1 Android 4.1.2 Jelly Bean official firmware update on Galaxy Note 2 N7100.
Pages: 1 2
Related posts:
XXDME1 Android 4.1.2 Jelly Bean Official Firmware for Galaxy Note 2 N7100
Update Galaxy Note 2 N7100 To XXDMC3 Android 4.1.2 Jelly Bean Firmware
How To Root Galaxy Note 2 N7100–Easy Tutorial
Custom Firmware for Galaxy Note 2 N7100 via SentinelROM Build 4.30
tagged with: android 4.1.2 jelly bean, gt-n7100, samsung galaxy note 2
Latest Updates
Update Android 4.2.2 SlimBean Build 6 Custom Firmware on LG Nexus 4 E960
Update Galaxy S2 I9100G to ZQLT4 Android 4.1.2 Jelly Bean Official Firmware
Install Android 4.2.2 Jelly Bean LiquidSmooth Build 2.5 Custom Firmware on Galaxy Nexus I9250
Android 4.2.2 ParanoidAndroid Build 3.56 Custom Firmware for Galaxy Nexus I9250
Update Galaxy Nexus I9250 via PACman RC1 Android 4.2.2 Custom Firmware
Update T-Mobile Galaxy S2 T989 via Android 4.2.2 AvatarROM Custom Firmware
Update CM10.1 Latest Nightly Android 4.2.2 Jelly Bean Custom Firmware on T-Mobile Galaxy S2 T989
CM10.1 Android 4.2.2 Jelly Bean Custom Firmware for HTC Amaze 4G
Update Galaxy S2 I9100G to DXLS8 Android 4.1.2 Jelly Bean Official Firmware
DDMD1 Android 2.3.6 Gingerbread Official Firmware for Galaxy Y Duos S6102
Return to top of page
Copyright © 2013 Droid Firmwares | About | Contact Us | Disclaimer
Sent from my SGH-T889 using xda premium
No changelog, eh?
jpeps, the fastest copy/paste in the west lol
Sent from my SGH-T889 using Tapatalk 4 Beta
I use the samsung galaxy nexus from google, and my android is stuck at 4.2.1 , is there any way to update it to at least 4.3? Thank you.
I saw all over internet that every note 8.0 is updated to 4.2. But I have connected to kies and no update. I am in Korea and was wondering is it my note or here in Korea there they aren't still updating to jelly bean 4.2.....does any one have any information to this. I am really annoyed with the Samsung slow update. The whole world got 4.2 and I am still stuck with this old 4.1!
Is any one else having this update problem?
Thanks in advance.
http://www.sammobile.com/firmwares/
Type in gt-n5110 in the search box and you can see if there is an update for your region. If not you can just flash other versions through Odin.
Sent from my GT-N5110 using Tapatalk
i have samsung galaxy nexus and labeled google on the back
android os running JB 4.1.1
build number J3O03C
How to update it to official 4.2.2 or 4.3 without rooting or using custom roms .
HEEEEELLLLLLLLLLLLLLPPPPPPPPPP!!!!!
See this post for instructions. Although it explains how to root, it also shows you how to do it without root.