Backdoor wont fit - T-Mobile Samsung Galaxy Note II

Anybody else having problems with the backdoor not closing all the way and making creaky sounds?!
Sent from my SGH-T889 using xda app-developers app

I had the same issue, one side did not fit the way it should making that squeek sound when you held it a certain way. Tried a different cover the one with the flap and issue is gone.

I have the flip cover as well its just a shame how the oem backdoor is terrible
Sent from my SGH-T889 using xda app-developers app

The problem I noticed is that some of the little tabs that click on are pointing in opposite directions. I had the most luck placing the long side that has the volume rocker on first and then nudging the rest of it on in the direction of the side with the power button.
Sent from my SGH-T889 using xda premium

I'm a diehard fan of samsung phones, but my biggest beef with them has always been how cheaply made their back covers are. 650.00 phone should have some metal on it.
Sent from my SGH-T889 using xda premium

Exactly my phone... the back covers are too cheap excluding the nfc support... by really why not backs like the agalxy nexus with texture or better fitting to the actual phone it self
Sent from my SGH-T889 using xda app-developers app

phreshjoker said:
Anybody else having problems with the backdoor not closing all the way and making creaky sounds?!
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I did that until i figured out how to insert it correctly. push in the sides (towards you) (each side / area at a time) so the notch goes behind, then push out as you push down. I couldn't get one side to sit flush before I figured this out.
---------- Post added 8th November 2012 at 12:00 AM ---------- Previous post was 7th November 2012 at 11:58 PM ----------
drewtang said:
I'm a diehard fan of samsung phones, but my biggest beef with them has always been how cheaply made their back covers are. 650.00 phone should have some metal on it.
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
their back covers are high-tech stuff, I believe it can bend about 180 degrees / in half, and still not break.

Related

DIY Case from Book

I just finished making this case for my N8013. I used an old hard cover book, with pages carefully cut out, a thin piece of clear plastic, from the craft store (the kind used for tables and chair covers), and a LOT of duct tape. The bottom tabs which hold the tablet are made of duct tape and the top strap is of the clear plastic. The plastic clings to the tablet giving added security. I also made the stylus-holder from duct tape. Very convenient.
It's not drop-proof, of course, but it is pretty cool.
Methaq
Sent from my SGH-I777 using xda app-developers app
farken what??
cheetah2k said:
farken what??
Click to expand...
Click to collapse
Oh watch your language, there are kids reading XDA.
Sent from my SGH-I777 using xda app-developers app
are the corners the only things holding your note??
Also why is it blue!??!?!
ugotproblemz said:
are the corners the only things holding your note??
Also why is it blue!??!?!
Click to expand...
Click to collapse
It's held on the bottom corners by the tape and across the top by the clear plastic strip. It's secure as the plastic hold and adheres to the screen (bezel area).
Regarding the blue (?) my note is grey, but I took the pics in a room with fluorescent lighting.
Sent from my SGH-I777 using xda app-developers app
So gloriously ghetto. I love it. Nothing like putting a $500 tablet in a taped up old book.
You are aware that really nice cases are available on Amazon for less than $20?
Sent from my GT-N8013 using Tapatalk 2
mitchellvii said:
So gloriously ghetto. I love it. Nothing like putting a $500 tablet in a taped up old book.
You are aware that really nice cases are available on Amazon for less than $20?
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
I am and I had one. I am not afraid of spending money for a case. Since I got my TF201, I have been wanting to make a case. I made this one and I love it. It completely disguises my SGN10.1.
Sent from my GT-N8013 using xda app-developers app
You should be safe unless you are unlucky enough to run into a book thief
Sent from my GT-N8013 using Tapatalk 2
mitchellvii said:
You should be safe unless you are unlucky enough to run into a book thief
Sent from my GT-N8013 using Tapatalk 2
Click to expand...
Click to collapse
Lol :thumbup:
Sent from my SGH-I777 using xda app-developers app

Anyone smooth/sanded a TPU case before?

Received this case:
http://www.ebay.com/itm/160881769645?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
I like it alot so far but the tpu has rough edges, wondering if anyone knows how I could attempt to fix it? I know I could just try sandpaper but would hate to ruin a new case if the sandpaper doesnt work
What part of it is too rough?
Sent from my SPH-L710 using xda app-developers app
I haven't done it on neoprene, but possibly a lapping kit may work. For example, when I lap a cpu or water block, I can usually find a lapping kit which includes various types/levels of roughness of sandpaper. Obviously it would be on the other spectrum as a cpu but one of the pieces should work, it usually includes about 10 different kinds. I'll see if I have any left, cause I usually use the second softest to polish, which may work
ChrisM0678 said:
What part of it is too rough?
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
The front lip....You can feel it when holding the phone and when talking
Nizda1 said:
I haven't done it on neoprene, but possibly a lapping kit may work. For example, when I lap a cpu or water block, I can usually find a lapping kit which includes various types/levels of roughness of sandpaper. Obviously it would be on the other spectrum as a cpu but one of the pieces should work, it usually includes about 10 different kinds. I'll see if I have any left, cause I usually use the second softest to polish, which may work
Click to expand...
Click to collapse
Nice
bob2300nx said:
The front lip....You can feel it when holding the phone and when talking
Nice
Click to expand...
Click to collapse
you may have gotten a fake one.
1. its from ebay
2. i think they are made in Korea (could be wrong)
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
bob2300nx said:
The front lip....You can feel it when holding the phone and when talking
Nice
Click to expand...
Click to collapse
lol i just found this in the description of the item
"High quality (very good)
Made in China
This item is not genuine SGP"
I knew it was fake when I bought it. This is a discontinued case. It's pretty nice other than a few flaws. Looks stylish. I know it's fake and from eBay, if you read my first post I'm not complaining just want to make the case better than it already is
bob2300nx said:
I knew it was fake when I bought it. This is a discontinued case. It's pretty nice other than a few flaws. Looks stylish. I know it's fake and from eBay, if you read my first post I'm not complaining just want to make the case better than it already is
Click to expand...
Click to collapse
Well that's why the build quality is crappy because its fake.
Sent from my SPH-L710 using Tapatalk 2
Not just on the fake ones...... I've got a genuine lumi with a hideous sharp lip all round. Took the wife's nail file to it and now is much improved.
Sent from my GT-I9300 using xda premium
daniel4653 said:
Well that's why the build quality is crappy because its fake.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
No ****. Your really good at stating the obvious.
Mr Woolf said:
Not just on the fake ones...... I've got a genuine lumi with a hideous sharp lip all round. Took the wife's nail file to it and now is much improved.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nice so filing with the nail file didnt make it look weird? I was just worried by sanding that the finish would get messed up
Worked fine with mine....
Sent from my GT-I9300 using xda premium
http://item.mobileweb.ebay.com/viewitem?itemId=170946339302
Those guys sold me a real one. Good case but prefer my tpu.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Screen cracked... What can I do?

Dropped from like a foot of the ground with a Samsung flip cover. Landed face down chipped screen in 2 corners and got a crack across the screen.
How do I get it fixed? Or can I do it myself? Anyone have any experience or suggestions? Thanks.
Send it to Samsung. Gonna be out as much as the phone cost you though. Get a good case to keep it from happening again
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
https://www.youtube.com/watch?v=bxgZeb5QytM&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I317 using xda premium
the "glass" is replacable seperately.. same as on the galaxy s3. it isnt worth it though in my opinion. it doesnt respond exactly the same. the replacements dont come with the contrast enhancing adhesive that is installed in the OE oled displays. and you can get specs of dust under it during the install, or potentially ruin it entirely. it's just easier to let sammy replace it professionaly with OE parts and have it done correctly.
believe me, i tried.
Rub some bacon on it?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
There is 3m doublesidded clear adhisive u can get for it ......no dust.....I thibk u can also get the digitizer and glass together online,, more money though
Sent from my SAMSUNG-SGH-I317 using xda premium
---------- Post added at 11:08 PM ---------- Previous post was at 11:05 PM ----------
Honestly I hate hearing this... but I still rock no case ...the way I look at it im such a nerd and just get the next big thing anyway
Sent from my SAMSUNG-SGH-I317 using xda premium
Thanks. Week look into Samsung service. Really fragile this glass. Wish the edges protected the glass better.
Sent from my GT-N7105 using Tapatalk 2

[Q] galaxy loose buttons?

hey guys, is it me or are the galaxy power and volume rockers a tad bit loose? not very loose but just loose enough to move around?
i just got it and im sorta frightened for it being a little loose
Nope firmly in place better go in and exchange it.
Sent from my SGH-T999 using Tapatalk 2
It's slightly loose but I put an otterbox on it. It's not very loose but it just moves when it is not pressed
Sent from my SGH-T999 using xda app-developers app
What if it is slightly loose. Just a mere wiggle?
Sent from my SGH-T999 using xda app-developers app
GalaxyBoi14 said:
What if it is slightly loose. Just a mere wiggle?
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Mine is like that, I was thinking of going to exchange it but then I checked my brother's s3 and it was the same.. Only the power button is like that for me though.. It also makes a creaking noise at times when I press it, which is a little annoying
Sent from my SGH-T999 using xda premium
Yeah just notice the power button moves a little I guess they just have it. But my volume buttons are firms.
Sent from my SGH-T999 using xda app-developers app
Thanks and maybe it's built like it. I'm thinking if taking it to make them tighter. So you have a case on it?
Sent from my SGH-T999 using xda app-developers app
Yeah I have a TPU case on it. I think it came like this from day one
Sent from my SGH-T999 using xda app-developers app
It did? Because I was thinking that the case did it. Are you worried it might fall off too?
Sent from my SGH-T999 using xda app-developers app
No I'm not listen don't worry so much I doubt a case is going to cause that. Doubt is going to fall off if that was the case it's a major flaw by Samsung which I doubt they did. Then again I have a year warranty so I'm not worried about it. You have warranty on it right?
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 09:57 PM ---------- Previous post was at 09:52 PM ----------
I did further research and people are reporting on the Verizon forums that is pretty common multiple people confirming that power is loose. Again just Samsung being pretty cheap building their phones with everything plastic, just a poor build. Even brand new coming like that, also sprint s3 same thing.
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 10:01 PM ---------- Previous post was at 09:57 PM ----------
http://forum.xda-developers.com/showthread.php?t=1939564
Link from research, I don't think they can replace it just because is loose I would though if it's off like some users reported theirs were.
Sent from my SGH-T999 using xda app-developers app
Thanks man! Really made me feel better that my device is not a defect
Sent from my SGH-T999 using xda app-developers app
Over time, did it eventually fail off?
Sent from my SGH-T999 using xda app-developers app
GalaxyBoi14 said:
hey guys, is it me or are the galaxy power and volume rockers a tad bit loose? not very loose but just loose enough to move around?
i just got it and im sorta frightened for it being a little loose
Click to expand...
Click to collapse
i just got mine on april 3 2014. tmobile. both power and volume rocker are loose. I accidentally press the volume rocker and can hear the phone beep after i put it in a thick leather horizontal case. I'll have a black s-line TPU case soon. Never noticed before, never paid attention in stores. Now i want to return it because of this. Don't want to play around with buttons. I had LG and tab 3 8.0 that have stiff buttons and rockers. WTF is wrong with this company???!!! They always fk something up in an otherwise very good device.
You are still within the buyers remorse period. (I think that's what it's called).
Never had any issue with mine. Take it back to a store and ask to compare to another, then exchange for another s3 or different device altogether.
Sent from my SM-N900T using Tapatalk
DocHoliday77 said:
You are still within the buyers remorse period. (I think that's what it's called).
Never had any issue with mine. Take it back to a store and ask to compare to another, then exchange for another s3 or different device altogether.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
a thick case with vol rocker cutout fixes it so i'm not too upset. expected things to be perfect for this expensive flagship phone. ordered another phone but not because of the loose buttons, different provider under tmobile, so i'll compare but its going to be the same white tmobile sgh-t999l.

Any one tried this case with their nexus? Fonsom

http://www.amazon.com/gp/product/B00E8Q067O/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A19R3BN6ZSO9A1 its cheap,not sure anyone using it or not.. If you happen to be using this case please give ur input about it. Many thanks =)
Sent from my Nexus 7 using xda app-developers app
Looks good for the price, might be a bit bulky though.
I have a standard Fosmon TPU case. It was also very cheap but surprisingly good quality.
Sent from my Nexus 7 using Tapatalk
Yeah,its a bit bulky..but im buying for the stand and without the cover that cover the screen region. Coz currently I'm using rock case which the cover is annoying when u tried to take picture or one handed operation ...
Sent from my Nexus 7 2013 using xda app-developers app
I went with this one:
http://www.amazon.com/Fosmon-SLIM-F...qid=1390424268&sr=1-1&keywords=fosmon+nexus+7
Provides enough protection for peace of mind, but as bulk-free as a case can be. Might even make the tablet easier to handle (adds a little dimension along the lip of the bezel).
Steven How said:
http://www.amazon.com/gp/product/B00E8Q067O/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=A19R3BN6ZSO9A1 its cheap,not sure anyone using it or not.. If you happen to be using this case please give ur input about it. Many thanks =)
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I like this one better. http://www.ebay.com/itm/Trident-Aeg...es_Covers_Keyboard_Folios&hash=item2a363f14fa
It has rubber bumpers in the corners, just like Ballistic cases. Plus, read the reviews for the one you linked to. Seems kind of cheap-made.
---------- Post added at 05:25 PM ---------- Previous post was at 05:19 PM ----------
DaveRichardson said:
I went with this one:
http://www.amazon.com/Fosmon-SLIM-F...qid=1390424268&sr=1-1&keywords=fosmon+nexus+7
Provides enough protection for peace of mind, but as bulk-free as a case can be. Might even make the tablet easier to handle (adds a little dimension along the lip of the bezel).
Click to expand...
Click to collapse
I have that one too, but I don't expect it to protect as well as the Trident case I linked to above.
Trident is expensive..but the back looks cool
Sent from my Nexus 7 using xda app-developers app
Steven How said:
Trident is expensive..but the back looks cool
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
You get what you pay for though. The case offers exceptional drop protection.
DaveRichardson said:
I went with this one:
http://www.amazon.com/Fosmon-SLIM-F...qid=1390424268&sr=1-1&keywords=fosmon+nexus+7
Provides enough protection for peace of mind, but as bulk-free as a case can be. Might even make the tablet easier to handle (adds a little dimension along the lip of the bezel).
Click to expand...
Click to collapse
That's the one I have. It's a basic TPU case but is good quality, it's much better than the Juppa case I also have
I have that case. The stand works well. The cutouts are well placed and it feels good in the hands.
Sent from my Nexus 7 using XDA Premium HD app
tgmotoman said:
I have that case. The stand works well. The cutouts are well placed and it feels good in the hands.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Really? Will it fall if u use it while with the stand expended? Does it add alot of weight?
Send from my NTT Docomo Xperia AX SO-01E
The stand has a second part that click into place when opened all the way. This makes it rigid so it does not collapse. It is a little flimsy but so far I haven't had any issues with it.
As far as weight is concerned, yeah it isn't the lightest case there is but the protection it give seems to be worth the weight to me.
Sent from my Nexus 7 using XDA Premium HD app
tgmotoman said:
The stand has a second part that click into place when opened all the way. This makes it rigid so it does not collapse. It is a little flimsy but so far I haven't had any issues with it.
As far as weight is concerned, yeah it isn't the lightest case there is but the protection it give seems to be worth the weight to me.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Cool,just order mine..might reach in 3-4 weeks =/
Sent from my Nexus 7 using xda app-developers app
Just got my case. Here's some pic
Send from my NTT Docomo Xperia AX SO-01E

Categories

Resources