Hi Xda
I upgraded the hboot to 1.28 to try out arhd 12.0, Previous to the upgrade it was something like 0.48 or .98 etc running the latest paranoid android rom
I wanted to go back to the PA rom however when I restored my backup had process errors on start up so thought i needed to reflash the boot img, however for some reason even though adb can see my phone, when i look to flash the boot.img it cannot find it and says cannot load?!
I have tried searching and i have read a few things regards to the 1.28 bootloader.. but nothing specific to my issue, is this the reason why? could some please advise how to enable me to flash boot.img again
Many thanks
Michael
What CID does your phone have?
That hboot only works with very specific CIDS...
Hi peedub, thanks for the reply.
It is HTC_001 or 01. It was in the list of availble CIDs that the hboot works on.
As mentioned it has upgraded successfully and I have ARHD now installed, my issue is that I cannot either restore to previous ROM (Paranoid Android) via CWM due to when it does reboot after restore it comes up with android process failed or something similar.
When trying to reflash the boot.img for Paranoid Android to overcome these issues my ADB/Fastboot/SDK will not recognise the boot.img
however when i type in fastboot devices it recognises my phone.
Has anyone experienced this and can shed some light on a fix?
Many thanks again
I will get there said:
Hi Xda
I upgraded the hboot to 1.28 to try out arhd 12.0, Previous to the upgrade it was something like 0.48 or .98 etc running the latest paranoid android rom
I wanted to go back to the PA rom however when I restored my backup had process errors on start up so thought i needed to reflash the boot img, however for some reason even though adb can see my phone, when i look to flash the boot.img it cannot find it and says cannot load?!
I have tried searching and i have read a few things regards to the 1.28 bootloader.. but nothing specific to my issue, is this the reason why? could some please advise how to enable me to flash boot.img again
Many thanks
Michael
Click to expand...
Click to collapse
Code:
fastboot flash boot path/to/boot.img
Hi Matt
Thanks for your reply, could you explain your post a little more. Is that a diagnostic command to see if Adb is working or would that actually flash the boot.img?
Many thanks
You can't use AOSP/CM/AOKP based ROMs with 1.28 HBOOT and above. Most devs do warn you it's a one way street when upgrading to 1.28 in terms of flashing ROMs.
I'm not sure if running a RUU will work, or not, to downgrade the HBOOT.
Though you could try what matt95 suggested. His suggestion would just flash the boot.img for the ROM you're trying to use.
Thanks Harrysoon
Unfortunately It didnt stipulate this on ARHD as I would have reconsidered. I have seen a link posted somewhere to get around this.
I would have thought however that adb would have at least attempted to flash it and then failed but to not recognise it?
With regards to the path from Matt is that exactly as i type it?
If you can flash a boot.IMG it has to be a special one for 1.28 or 1.31. I'll find it for you
Sent from my HTC One X using xda app-developers app
---------- Post added at 03:43 PM ---------- Previous post was at 03:37 PM ----------
Go to the IceColdJelly page and scroll down till you see the OP specifically say that you can use this boot. IMG for 1.28 or 1.31. Then repack it for your ROM?
Sent from my HTC One X using xda app-developers app
Top man Tom, thank you!
Just checking on repacking a kernal, and I have seen the automated packer tool, however i do not understand how to tie it all in.
http://nibble.cc/repack/
could someone explain steps 2 - 5 with paranoid android being the ROM I want please
I will get there said:
Hi Matt
Thanks for your reply, could you explain your post a little more. Is that a diagnostic command to see if Adb is working or would that actually flash the boot.img?
Many thanks
Click to expand...
Click to collapse
the pc cannot load the file cause you don't tell him where the file is...so follow my command and you should be good
Related
i searched many many sites but didn't find anything.
im trying restore my wfs to stock rom and stock recovery.
s-on or s-off don't important.
ruu didn't work, i get error messages.
what i must do?
There is many how to's if you look
Try this...
http://forum.xda-developers.com/showthread.php?p=21891784
If I helped hit thanks
Sent from my HTC Wildfire S A510e using XDA
As my first post here, I wanted to make it something helpful. Anyway, you will need to find the stock recovery and use fastboot to put it on. Sorry, don't know where you would look to find one, maybe someone has one here?
Raidillon said:
i searched many many sites but didn't find anything.
im trying restore my wfs to stock rom and stock recovery.
s-on or s-off don't important.
ruu didn't work, i get error messages.
what i must do?
Click to expand...
Click to collapse
well as i understand you need to revert to device's stock condition
as far as i know only way to do it is by RUU or individually flashing every image. RUU is easily done but as you mentioned you get error messages try finding out what those error messages mean
common messages are
cant connect to device----ensure you are in fastboot usb mode
version problems----check weather you are using the right RUU (RUU is different for diferent regions) one RUU can have more than one versions so be sure which one you need
and you also need to lock you bootloader before running RUU
let me know if anything works
take a complete backup and make a goldcard just in case..you never know what may happen
Raidillon said:
s-on or s-off don't important.
Click to expand...
Click to collapse
Actually, this 's-on' and 's-off' is very much important. You can flash any stock rom with s-off but not that easily with s-on. I'm a noob so I can't really explain further. Search for it!
Raidillon said:
i searched many many sites but didn't find anything.
im trying restore my wfs to stock rom and stock recovery.
s-on or s-off don't important.
ruu didn't work, i get error messages.
what i must do?
Click to expand...
Click to collapse
which one do you need ?
http://115.com/file/e7471cfo TW2.33(download password:adbflash.com)
http://115.com/file/e7xci55n TW2.35
http://115.com/file/dpucqwbo CN2.35
just one key flash recovery(3e)and stcock rom,follow this:
http://forum.xda-developers.com/showthread.php?t=1664533&highlight=no+recovery
Raidillon said:
i searched many many sites but didn't find anything.
im trying restore my wfs to stock rom and stock recovery.
s-on or s-off don't important.
ruu didn't work, i get error messages.
what i must do?
Click to expand...
Click to collapse
i got same problem some days ago.cant port ruu and remove cwm.
so first of all you find your ruu from football's marvel collection or search on internet.if its in .zip file its very good extract it,you ll find recovery.img,boot.img and system.img
or if its in .exe file.first try installation wizard if its fail.again start installation wizard and then keep it on dont update bootloader just go to temp folder.(C:\Users\[LoginName]\AppData\Local\Temp\{82B23FCD-D5D0-45CA-A3A2-5350D3926551}) in this you will have see rom.zip file extract it.you ll find
recovery.img,boot.img and system.img then,
remove battery (power +volume down) to going in hboot then click on fastboot then plug your phone usb with computer open cmd and type:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
you can see fastboot file in your extracted zip.by this way you manually port stock rom.i tried it and it successfully possible.but i use my original stock rom,ages when i used europe rom it failed.
and please be careful in type commands it ll brick your phone if you doing anything wrong..maybe it ll help you
and yes one thing read this thread carefully i recommand third method which i mentioned here.
http://androidforums.com/htc-wildfi...arvel-a510e-gsm-software-version-2-3-5-a.html
good luck.
---------- Post added 3rd June 2012 at 12:06 AM ---------- Previous post was 2nd June 2012 at 11:54 PM ----------
crossfire77 said:
i got same problem some days ago.cant port ruu and remove cwm.
so first of all you find your ruu from football's marvel collection or search on internet.if its in .zip file its very good extract it,you ll find recovery.img,boot.img and system.img
or if its in .exe file.first try installation wizard if its fail.again start installation wizard and then keep it on dont update bootloader just go to temp folder.(C:\Users\[LoginName]\AppData\Local\Temp\{82B23FCD-D5D0-45CA-A3A2-5350D3926551}) in this you will have see rom.zip file extract it.you ll find
recovery.img,boot.img and system.img then,
remove battery (power +volume down) to going in hboot then click on fastboot then plug your phone usb with computer open cmd and type:
http://forum.xda-developers.com/images/icons/icon4.gif
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
you can see fastboot file in your extracted zip.by this way you manually port stock rom.i tried it and it successfully possible.but i use my original stock rom,ages when i used europe rom it failed.
and please be careful in type commands it ll brick your phone if you doing anything wrong..maybe it ll help you
and yes one thing read this thread carefully i recommand third method which i mentioned here.
http://androidforums.com/htc-wildfi...arvel-a510e-gsm-software-version-2-3-5-a.html
good luck.
Click to expand...
Click to collapse
and s-on or s-off.there are many difference between twos.i dont know much i m also noob here.but with s-off you can change your hboot,radio and many customization but with s-on its difficult i think.so i recommand you to flash your orginial stock rom if you are s-on.i have s-on phone so my phone wont remove cwm with any other stock roms and its got failed.so mind this thing.and know more about s-on and s-off read this.
http://forum.xda-developers.com/showthread.php?t=1564650
I solved my problem using flashy program. it's very useful. I get the recovery.img from a stock rom's .zip, then flashed.
I exploited some messages in this thread, thanks guys!
Sincerely,
Kagan
Sent from my HTC Wildfire S A510e using XDA
I am still running the .92 bootloader. I am running cm10.1. Is there any benefits to upgrading?
Sent from my ADR6300 using xda app-developers ap
zombolt said:
I am still running the .92 bootloader. I am running cm10.1. Is there any benefits to upgrading?
Sent from my ADR6300 using xda app-developers ap
Click to expand...
Click to collapse
Only benefit is that you can unlock it, and are then able to fastbot flash recoveries and boot images.
thankful
cmlusco said:
Only benefit is that you can unlock it, and are then able to fastbot flash recoveries and boot images.
Click to expand...
Click to collapse
I'm so thankful that cmlusco had these simple words listed here. I was trying without success to flash a recovery via hboot.92 to no avail. I am s-off and rooted running tinys cm10.1. The problem started when i wanted to use twrp as a recovery. I tried installing that in android itself with goomanager. It said it was successful so tried to reboot into recovery. no dice. it now doesn't even have cwm recovery which was what i was trying to replace. it just goes back into hboot. so i thought, "ok, i'll just adb it" again either with shell in android or via fastboot in hboot it says remote failed. this one line he just wrote tells me that despite everything i have, i cannot install via hboot. The only thing that works is having a pb31img file to install it. the problem is, most recoveries come in .img. so I thought i could just repackage it as a zip and use the txt from another twrp i had previously gotten to work by way of a pb31img and create my own new pb31img with the newest version (the old one i had was already made by someone else and installs flawlessly). basically now i'm curious if i should just ask how to make the newest twrp into a proper pb31img file to flash (since i know this works) or is there an easy way to upgrade hboot.092 to 1.07? Any help on either of these or both subjects would be greatly appreciated. Just for the record cmlusco, am i right in thinking the reason i can't fastboot flash my recovery is because my loader is locked somehow despite being rooted and s-off? will upgrading to hboot 1.07 enable all of what i want to do? Also, what's the best way to go about doing this? I have everything i need backed up so no worries there. Thanks in advance to any and all help!
thejase said:
I'm so thankful that cmlusco had these simple words listed here. I was trying without success to flash a recovery via hboot.92 to no avail. I am s-off and rooted running tinys cm10.1. The problem started when i wanted to use twrp as a recovery. I tried installing that in android itself with goomanager. It said it was successful so tried to reboot into recovery. no dice. it now doesn't even have cwm recovery which was what i was trying to replace. it just goes back into hboot. so i thought, "ok, i'll just adb it" again either with shell in android or via fastboot in hboot it says remote failed. this one line he just wrote tells me that despite everything i have, i cannot install via hboot. The only thing that works is having a pb31img file to install it. the problem is, most recoveries come in .img. so I thought i could just repackage it as a zip and use the txt from another twrp i had previously gotten to work by way of a pb31img and create my own new pb31img with the newest version (the old one i had was already made by someone else and installs flawlessly). basically now i'm curious if i should just ask how to make the newest twrp into a proper pb31img file to flash (since i know this works) or is there an easy way to upgrade hboot.092 to 1.07? Any help on either of these or both subjects would be greatly appreciated. Just for the record cmlusco, am i right in thinking the reason i can't fastboot flash my recovery is because my loader is locked somehow despite being rooted and s-off? will upgrading to hboot 1.07 enable all of what i want to do? Also, what's the best way to go about doing this? I have everything i need backed up so no worries there. Thanks in advance to any and all help!
Click to expand...
Click to collapse
You don't even need to go through all that trouble. Just use the PB31IMG.zip here:
PB31IMG.zip - 3.61 MB
It's also in the TWRP thread on one of the last few pages, TWRP 2.4.1.0.
thejase said:
I'm so thankful that cmlusco had these simple words listed here. I was trying without success to flash a recovery via hboot.92 to no avail. I am s-off and rooted running tinys cm10.1. The problem started when i wanted to use twrp as a recovery. I tried installing that in android itself with goomanager. It said it was successful so tried to reboot into recovery. no dice. it now doesn't even have cwm recovery which was what i was trying to replace. it just goes back into hboot. so i thought, "ok, i'll just adb it" again either with shell in android or via fastboot in hboot it says remote failed. this one line he just wrote tells me that despite everything i have, i cannot install via hboot. The only thing that works is having a pb31img file to install it. the problem is, most recoveries come in .img. so I thought i could just repackage it as a zip and use the txt from another twrp i had previously gotten to work by way of a pb31img and create my own new pb31img with the newest version (the old one i had was already made by someone else and installs flawlessly). basically now i'm curious if i should just ask how to make the newest twrp into a proper pb31img file to flash (since i know this works) or is there an easy way to upgrade hboot.092 to 1.07? Any help on either of these or both subjects would be greatly appreciated. Just for the record cmlusco, am i right in thinking the reason i can't fastboot flash my recovery is because my loader is locked somehow despite being rooted and s-off? will upgrading to hboot 1.07 enable all of what i want to do? Also, what's the best way to go about doing this? I have everything i need backed up so no worries there. Thanks in advance to any and all help!
Click to expand...
Click to collapse
Correct you can not fastboot flash unless your bootloader is unlocked. Since your s-off you can update the bootloader by flashing this file http://dinc.does-it.net/Hboots/Hboot_1.07/PB31IMG.zip, thru hboot. Once updated, you can unlock it and then flash img files with fastboot.
However, here is the TWRP 2.4.1.0 PB31IMG.zip http://dinc.does-it.net/Recoveries/TWRP_2.4.1.0/PB31IMG.zip, if you dont want to update the bootloader. You may need to flash it two or three times to get it to take.
---------- Post added at 01:43 PM ---------- Previous post was at 01:37 PM ----------
tiny4579 said:
You don't even need to go through all that trouble. Just use the PB31IMG.zip here:
PB31IMG.zip - 3.61 MB
It's also in the TWRP thread on one of the last few pages, TWRP 2.4.1.0.
Click to expand...
Click to collapse
Beat me to it lol, i took to long to type.
cmlusco said:
Correct you can not fastboot flash unless your bootloader is unlocked. Since your s-off you can update the bootloader by flashing this file http://dinc.does-it.net/Hboots/Hboot_1.07/PB31IMG.zip, thru hboot. Once updated, you can unlock it and then flash img files with fastboot.
However, here is the TWRP 2.4.1.0 PB31IMG.zip http://dinc.does-it.net/Recoveries/TWRP_2.4.1.0/PB31IMG.zip, if you dont want to update the bootloader. You may need to flash it two or three times to get it to take.
---------- Post added at 01:43 PM ---------- Previous post was at 01:37 PM ----------
Beat me to it lol, i took to long to type.
Click to expand...
Click to collapse
Thanks to you and tiny for such a quick and simple response. pb31img used and updated perfectly! Just curious, cmlusco, in your signature i noticed you on hboot 1.07 but it's locked. Any particular reason for having it locked? I have yet to update mine but i did download and organize the pb31 hboot img you gave me for possible future use ( if i feel the need). Other than the aformentioned advantage of flashing hboot via fasboot and adb, is there any other advantage of hboot 1.07? Thanks again guys, you make my life easier.
thejase said:
Thanks to you and tiny for such a quick and simple response. pb31img used and updated perfectly! Just curious, cmlusco, in your signature i noticed you on hboot 1.07 but it's locked. Any particular reason for having it locked? I have yet to update mine but i did download and organize the pb31 hboot img you gave me for possible future use ( if i feel the need). Other than the aformentioned advantage of flashing hboot via fasboot and adb, is there any other advantage of hboot 1.07? Thanks again guys, you make my life easier.
Click to expand...
Click to collapse
Not really, S-OFF should get you what you need. You only miss the ability to flash via fastboot without an unlocked HBOOT. PB31IMG.zip works fine with S-OFF.
thejase said:
Thanks to you and tiny for such a quick and simple response. pb31img used and updated perfectly! Just curious, cmlusco, in your signature i noticed you on hboot 1.07 but it's locked. Any particular reason for having it locked? I have yet to update mine but i did download and organize the pb31 hboot img you gave me for possible future use ( if i feel the need). Other than the aformentioned advantage of flashing hboot via fasboot and adb, is there any other advantage of hboot 1.07? Thanks again guys, you make my life easier.
Click to expand...
Click to collapse
I have never had the need to unlock it yet, but like having the ability if needed.
Hey dudes,
im working on flashing the dhd for various hours.
It is the german version T-Mobile branded.
I had rooted via aahk.
After some problems, i think there is a chance by trying again, also i relooked the bootloader.
In the end it was possible to flash a custom rom.
So I flasht this beautiful: http://forum.xda-developers.com/showthread.php?t=2113047
But now all my Phone is showing to me is the T-Mobile branded screen. no boot to rom.
So my Phone is:
S-On
Bootloader relocked.
rooted (?)
i can't boot into android and i don't have any idea what is to do.
Maybe installing a stock rom via CWM as .zip oder flashing via ADB.
please give me your help
greetz
You are not S-Off, so either you got rid of it or AAHK didn't work properly. Your phone can't be both S-Off and have an unlocked bootloader. Re-unlock and flash a ROM from recovery.
okay thanks i get it, but it isn't much better
I flashed a custom rom, no result.
only T-Mobile-Screen
-unreal- said:
okay thanks i get it, but it isn't much better
I flashed a custom rom, no result.
only T-Mobile-Screen
Click to expand...
Click to collapse
Because you are S-On, each time you flash a ROM you need to
Code:
fastboot flash boot boot.img
i need this after flashing a .zip in the recovery?
what boot.img is this and where to get?
how can i bring my phone s-off?
sorry for my questions ;* ^^
-unreal- said:
i need this after flashing a .zip in the recovery?
what boot.img is this and where to get?
how can i bring my phone s-off?
sorry for my questions ;* ^^
Click to expand...
Click to collapse
Yes, after zip in recovery. It is in the ROM zip. You need to S-Off manually now; there are instructions at AAHK's old site.
bananagranola said:
Yes, after zip in recovery. It is in the ROM zip. You need to S-Off manually now; there are instructions at AAHK's old site.
Click to expand...
Click to collapse
Big Thanks, the Rom works.
But the last problem is I don't get a mobile signal.
APN is okay.
I'm in germany aren't some roms working with gsm?
I had reinstalled with full wipe ? no result.
Or should I simply try another rom?
my bootloader show me this message. (added File)
how to fix it?
thanks guys <3
It would be nice if somebody could help
the bootloader is looking for PD98IMG if an sd card is mounted.
I tried a lot of PD98IMG files, but none of this are working.
it's very difficult to get them, because the most of these files are down.
additional i have no idea which is the right file for me and how i can fix this problem.
please help
You need to flash a radio from bootloader and a ril from recovery
Sent from my HTC Desire HD using xda app-developers app
---------- Post added at 10:02 PM ---------- Previous post was at 09:53 PM ----------
Take this radio zip and extract it an flash on bootloader from your pc and the ril flash it in recovery.
https://www.dropbox.com/home/radio and ril from my HTC Desire HD using xda app-developers app
hi.
i tried flashing a rom yesterday, and after my failed attempt on repacking kernel my phone wont flash anything.
i tried relocking and unlocking bootloader again and reinstalled the recovery.
also tried formatting most of the stuff.
tried following a solution to a similar issue here without any luck.
anyone have a clue on how to fix this?
i put the recovery log in attachments.
thanks in advance.
- svennp
Whats your hboot number ?
Mr Hofs said:
Whats your hboot number ?
Click to expand...
Click to collapse
It's 0.43. I know 'cuz I'm a wizard.
Ah the wizzard of codes in tha house :thumbup:
Edit : i overlooked that part.....i seem to do that a lot lately
Well then thats too low to flash JB roms. You need to update the hboot first.
Whats your main number
Fastboot getvar version-main
Mr Hofs said:
Ah the wizzard of codes in tha house :thumbup:
Edit : i overlooked that part.....i seem to do that a lot lately
Well then thats too low to flash JB roms. You need to update the hboot first.
Whats your main number
Fastboot getvar version-main
Click to expand...
Click to collapse
1.26.401.2
Download this file
http://bugsylawson.com/index.php/fi...12-radio-2120413520-release-274900-signedexe/
Put the phone in the bootloader and relock it
Fastboot oem lock
Then run the ruu with admin right and it will flash the phone to full stock ics hboot 1.12. After that you can update with official ota's to jellybean !
thanks for the help! works fine now
Good mate ! :thumbup:
Another CASE CLOSED ! tonight
Alright, so here's my issue. I'm running into a similar problem while working on a friend's One XL.
EVITA PVT SHIP S-ON RL
HBOOT-1.09.0000
RADIO-0.16.32.09.19_2
OpenDSP-v28.1.0.32.0504
eMMc-boot
Apr 2 2012,21:08:24
I've tried downloading various AT&T RUU's and have gotten the same error listed above. Any ideas here?
---------- Post added at 06:09 PM ---------- Previous post was at 06:02 PM ----------
Mr Hofs said:
Download this file
http://bugsylawson.com/index.php/fi...12-radio-2120413520-release-274900-signedexe/
Put the phone in the bootloader and relock it
Fastboot oem lock
Then run the ruu with admin right and it will flash the phone to full stock ics hboot 1.12. After that you can update with official ota's to jellybean !
Click to expand...
Click to collapse
By the way, bugsylawson RUU's were ones that I used.
Christopher3712 said:
Alright, so here's my issue. I'm running into a similar problem while working on a friend's One XL.
EVITA PVT SHIP S-ON RL
HBOOT-1.09.0000
RADIO-0.16.32.09.19_2
OpenDSP-v28.1.0.32.0504
eMMc-boot
Apr 2 2012,21:08:24
I've tried downloading various AT&T RUU's and have gotten the same error listed above. Any ideas here?
---------- Post added at 06:09 PM ---------- Previous post was at 06:02 PM ----------
By the way, bugsylawson RUU's were ones that I used.
Click to expand...
Click to collapse
You are actually in the wrong forum. This forum is for the HTC one X codename endevoru, you have to be in the HTC one XL evita forum
(assert failed: getprop("ro.bootloader"))
bro..i hav htc one x
when i am trying to install viper x rom it showing an error
hboot-1.36.000
when im trying to relock the bootloder and flash old rom through
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_India_1.29.720.11_Radio_1.1204.105.14_release_261615_signed_2.exe
it is showing 12 signature error
plz help
raaaaaaj00007 said:
bro..i hav htc one x
when i am trying to install viper x rom it showing an error
hboot-1.36.000
when im trying to relock the bootloder and flash old rom through
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_India_1.29.720.11_Radio_1.1204.105.14_release_261615_signed_2.exe
it is showing 12 signature error
plz help
Click to expand...
Click to collapse
What error ? And im not talking about the ruu error !
Sent from my HTC One X using XDA Premium 4 mobile app
I was hoping someone could help me, I just downloaded the Resurrection Remix ROM (from this thread for my HTC One X. I have root, unlocked the bootloader and installed TWRP about 8 months ago, and finally decided to flash a custom ROM onto the phone. I have been following the guide found in this forum post in order to flash the rom. However when I go to install the zip package, I receive the error:
assert failed: getprop("ro.bootloader") == "1.28.0000" || getprop("ro.bo[TEXT ENDS HERE, CAN'T SEEM TO SCROLL RIGHT IN THE LOG)
E:Erroer in filepath/Resurrection_remix..
(Status 7)
If anyone could please provide some assistance it would be much appreciated, its a UK phone, so should be the international version of the One X right? I can't seem to work out where I have gone wrong and don't want to take any more steps in case I brick the phone
Thanks.
Edit: OK so I followed the "restore" option in TWRP, and restored a backup of my phone's ROM so at least it's safe now. But if someone could still point out where I'm going wrong or has any advice it would be welcomed, I'm sure it's probably something obvious that I am missing. Perhaps something to do with the kernel?
1day said:
I was hoping someone could help me, I just downloaded the Resurrection Remix ROM (from this thread for my HTC One X. I have root, unlocked the bootloader and installed TWRP about 8 months ago, and finally decided to flash a custom ROM onto the phone. I have been following the guide found in this forum post in order to flash the rom. However when I go to install the zip package, I receive the error:
assert failed: getprop("ro.bootloader") == "1.28.0000" || getprop("ro.bo[TEXT ENDS HERE, CAN'T SEEM TO SCROLL RIGHT IN THE LOG)
E:Erroer in filepath/Resurrection_remix..
(Status 7)
If anyone could please provide some assistance it would be much appreciated, its a UK phone, so should be the international version of the One X right? I can't seem to work out where I have gone wrong and don't want to take any more steps in case I brick the phone
Thanks.
Edit: OK so I followed the "restore" option in TWRP, and restored a backup of my phone's ROM so at least it's safe now. But if someone could still point out where I'm going wrong or has any advice it would be welcomed, I'm sure it's probably something obvious that I am missing. Perhaps something to do with the kernel?
Click to expand...
Click to collapse
Flash latest twrp 2.7.1 it is for kitkat roms o;der will not work
Thant said:
Flash latest twrp 2.7.1 it is for kitkat roms o;der will not work
Click to expand...
Click to collapse
Thanks Thant. The latest version of TWRP for endeavoru appears to only be 2.6.3 though? techerrata.com/browse/twrp2/endeavoru
After a search I managed to find this file: androidfilehost.com/?fid=23329332407577118
However after flashing it, it now just hangs on the splash page when entering recovery. I have tried clearing the cache but it still hangs.
Also I accidentally installed a recovery for another phone model earlier today, through TWRP recovery. Is there any way I can remove this in case it is causing problems? Thankfully my device still seems to function fine.
I've just flashed 2.6.3.0 and attempted to install both CyanogenMod & the previous ROM mentioned, however I am still receiving the same error.
UPDATE: I flashed the unofficial TWRP 2.7.x from here, however I am receiving USB-OTG errors, I guess because my hboot is only version 1.12.00. Are there are any alternatives?
1day said:
Thanks Thant. The latest version of TWRP for endeavoru appears to only be 2.6.3 though? techerrata.com/browse/twrp2/endeavoru
After a search I managed to find this file: androidfilehost.com/?fid=23329332407577118
However after flashing it, it now just hangs on the splash page when entering recovery. I have tried clearing the cache but it still hangs.
Also I accidentally installed a recovery for another phone model earlier today, through TWRP recovery. Is there any way I can remove this in case it is causing problems? Thankfully my device still seems to function fine.
I've just flashed 2.6.3.0 and attempted to install both CyanogenMod & the previous ROM mentioned, however I am still receiving the same error.
UPDATE: I flashed the unofficial TWRP 2.7.x from here, however I am receiving USB-OTG errors, I guess because my hboot is only version 1.12.00. Are there are any alternatives?
Click to expand...
Click to collapse
post the result from command fastboot getvar all and delete your S/N and IMEI from the info
Hello,
I've been recently trying to install few times the Android Revolution HD 10.2 ROM however I always fail. Same happened with previous version.
After the ROM installs, i hit reboot and then nothing. It just freezes on the htc logo (with "developer" text) and nothing happens.
So my question is, what am I doing wrong?
I have no problems with installing ViperOne and all of the non-stock based ROMs.
I can't get S-OFF, so I hope it isn't neccessary
Please keep in mind that I'm pretty new at using HTC One m8, however I have experience with android.
If you have the HTC__001 cid or any which is WWE/ Europe you can and MUST flash the firmware.zip for 2.22.401.4 ...otherwise it won't boot or many things will be broken...all necessary things can be found in each Rom thread, how to flash things and what you need etc...Also which recovery do you use and did you flashed a few mods or so afterwards?
One-M8-Master said:
If you have the HTC__001 cid or any which is WWE/ Europe you can and MUST flash the firmware.zip for 2.22.401.4 ...otherwise it won't boot or many things will be broken...all necessary things can be found in each Rom thread, how to flash things and what you need etc...Also which recovery do you use and did you flashed a few mods or so afterwards?
Click to expand...
Click to collapse
Ok, so I don't really know what this CID is. I've seen people talking about this but can't really tell what it is for. Is this some kind of ID a device, for which country it's meant?
You said "flash 2.22.401.4" firmware. Now I would have to find out how to do that (after I do that, will I be able to normally downgrade to 4.4.2 or will there be some problems?)
There's flashtool for Xperia's, Odin for Samsungs and is there a simillar software for HTC devices (I have something called All-In-One_Kit)?
I've seen also something like RUU, but I would need to fix fastboot, as it isn't working after fresh install of Windows.
My CID: HTC_032
Recovery: TWRP 2.7.1.0
Kernel: Unknown, the one that comes with ViperOne (Already tried flashing ARHD with elementaX kernel)
Current version of firmware: 1.54.401.5
mr.loverlover said:
Ok, so I don't really know what this CID is. I've seen people talking about this but can't really tell what it is for. Is this some kind of ID a device, for which country it's meant?
You said "flash 2.22.401.4" firmware. Now I would have to find out how to do that (after I do that, will I be able to normally downgrade to 4.4.2 or will there be some problems?)
There's flashtool for Xperia's, Odin for Samsungs and is there a simillar software for HTC devices (I have something called All-In-One_Kit)?
I've seen also something like RUU, but I would need to fix fastboot, as it isn't working after fresh install of Windows.
My CID: HTC_032
Recovery: TWRP 2.7.1.0
Kernel: Unknown, the one that comes with ViperOne (Already tried flashing ARHD with elementaX kernel)
Current version of firmware: 1.54.401.5
Click to expand...
Click to collapse
Go and read all important guides to how to do that and what you have to do...you really now nearly nothing about those things...so to be in the safe side read all those guides!
One-M8-Master said:
Go and read all important guides to how to do that and what you have to do...you really now nearly nothing about those things...so to be in the safe side read all those guides!
Click to expand...
Click to collapse
Agreed. Messing with things like firmware, without the proper knowledge is a surefire way to brick the phone.
---------- Post added at 02:42 PM ---------- Previous post was at 02:37 PM ----------
mr.loverlover said:
There's flashtool for Xperia's, Odin for Samsungs and is there a simillar software for HTC devices (I have something called All-In-One_Kit)?
I've seen also something like RUU, but I would need to fix fastboot, as it isn't working after fresh install of Windows.
Click to expand...
Click to collapse
RUU isn't going to help you with any of this (s-off, flashing firmware packages, etc.). Its just to restore to a stock image (ROM, radio, hboot, recovery).
I really recommend you get fastboot working. You need adb/fastboot to get s-off anyway.
Toolkits are only of limited use. They don't do anything you can't do manually with a few adb or fastboot commands. And many would say if you can't handle doing these things manually, you shouldn't be messing with the phone at all.
redpoint73 said:
Agreed. Messing with things like firmware, without the proper knowledge is a surefire way to brick the phone.
---------- Post added at 02:42 PM ---------- Previous post was at 02:37 PM ----------
RUU isn't going to help you with any of this (s-off, flashing firmware packages, etc.). Its just to restore to a stock image (ROM, radio, hboot, recovery).
I really recommend you get fastboot working. You need adb/fastboot to get s-off anyway.
Toolkits are only of limited use. They don't do anything you can't do manually with a few adb or fastboot commands. And many would say if you can't handle doing these things manually, you shouldn't be messing with the phone at all.
Click to expand...
Click to collapse
Yeah, I would need RUU to get to stock 4.4.3.
I can't get s-off, firewater isn't working with my phone, and I don't want to choose the paid method, as I will probably soon change this device anyway.
mr.loverlover said:
Yeah, I would need RUU to get to stock 4.4.3.
Click to expand...
Click to collapse
I see what you're saying: RUU to stock, OTA to 4.4.3 to get the firmware package, then unlock bootloader again, install custom recovery and install ARHD.
Exactly, or RUU already to 4.4.3 skipping the ota.
Sent from HTC One m8, or maybe not anymore
mr.loverlover said:
Exactly, or RUU already to 4.4.3 skipping the ota.
Click to expand...
Click to collapse
Are there any 4.4.3 RUUs? More importantly, is there a 4.4.3 RUU for your version?
redpoint73 said:
Are there any 4.4.3 RUUs? More importantly, is there a 4.4.3 RUU for your version?
Click to expand...
Click to collapse
There is no ruu just system dumps/ recovery flashable zip of stock Rom
---------- Post added at 06:30 PM ---------- Previous post was at 06:28 PM ----------
Also there is no need of using a RUU... You can just download the stock Rom zip, flash back stock kernel and stock recovery...but only if that Rom matches your cid...If not you have to take a nandroid backup from Mr hofs collection thread...
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Aaaand to get ota running there is no need for relocked boot loader it will still work
One-M8-Master said:
Aaaand to get ota running there is no need for relocked boot loader it will still work
Click to expand...
Click to collapse
But you do for RUU, which is what I was referring to.
redpoint73 said:
But you do for RUU, which is what I was referring to.
Click to expand...
Click to collapse
Yea okay that's right but as long as there isn't any ruu available we don't need to reliving if we aren't s-off
One-M8-Master said:
Yea okay that's right but as long as there isn't any ruu available we don't need to reliving if we aren't s-off
Click to expand...
Click to collapse
But I want to keep talking about imaginary RUUs
But really, fair enough.
One-M8-Master said:
There is no ruu just system dumps/ recovery flashable zip of stock Rom
---------- Post added at 06:30 PM ---------- Previous post was at 06:28 PM ----------
Also there is no need of using a RUU... You can just download the stock Rom zip, flash back stock kernel and stock recovery...but only if that Rom matches your cid...If not you have to take a nandroid backup from Mr hofs collection thread...
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
Aaaand to get ota running there is no need for relocked boot loader it will still work
Click to expand...
Click to collapse
Thank You, You gave me so much information I needed to know more about this device.
I've found a link like this but I can't find my cid
So for example flashing "CID HTC__001" file would brake my device?
P.S. I'm currious what would happen if I flashed wrong CID firmware. Could You tell me more about flashing wrong one. Would it work normally, had some issues, wouldn't boot or wouldn't I be even able to flash this?
EDIT: Hehe, the link I provided is Mr hofs thread. So what now, if my CID isn't there? Can I just use any version that is for Europe, like eg. germany?
EDIT 2: Flashed stock, deodexed ROM 4.4.3, but still no luck with ARHD
mr.loverlover said:
Thank You, You gave me so much information I needed to know more about this device.
I've found a link like this but I can't find my cid
So for example flashing "CID HTC__001" file would brake my device?
P.S. I'm currious what would happen if I flashed wrong CID firmware. Could You tell me more about flashing wrong one. Would it work normally, had some issues, wouldn't boot or wouldn't I be even able to flash this?
EDIT: Hehe, the link I provided is Mr hofs thread. So what now, if my CID isn't there? Can I just use any version that is for Europe, like eg. germany?
EDIT 2: Flashed stock, deodexed ROM 4.4.3, but still no luck with ARHD
Click to expand...
Click to collapse
If you are now s-off just get super cid with fastboot oem writecid 1111111 I hope enough ones xD or just write a cid like HTC__001 ... If you have further questions write me a pm and we can talk over hangouts or pm here... easier to follow the progress
Ok, finally got it.
I had to flash "SkyDragon+M8+Sense+444+Kernel+V2.0.1".
Now it's testing time.
Let's see if this ROM is so good.
EDIT: There's nothing cool in this ROM
Going back to skydragon.
Yea arhd is like stock Rom and yea nothing special about it
Hahaha aww man, do you not read what each ROM does before installing it so you know beforehand what you're getting yourself into?
Nah, I didn't. I saw many people were using it so I thought it must be good, but it isn't (no special features).
However I wanted to learn how to make it work, and I must say that the htc is the weirdest phone I ever had. Flashing a rom can't be done logically, here nothing works as it should in theory
Sent from HTC One m8, or maybe not anymore
I often see people who aren't able to get arhd working...but I really don't know why..the normal cwm recovery doesn't work as it should...use instead twrp or Philz...both are working foo and with Philz backup and restore is working where in twrp most of the m8 are having problems :/ I really don't have problems to install a custom Rom.
I got the phone, tried it one day stock, wanted to get a custom Rom, unlocked boot loader flashed custom recovery and afterwards Rom and elementalx kernel...without problems.. few months later was able to do s-off with sunshine and after that most things where again easier
mr.loverlover said:
Nah, I didn't. I saw many people were using it so I thought it must be good, but it isn't (no special features).
However I wanted to learn how to make it work, and I must say that the htc is the weirdest phone I ever had. Flashing a rom can't be done logically, here nothing works as it should in theory
Sent from HTC One m8, or maybe not anymore
Click to expand...
Click to collapse