Develop Bugs

Please help, EVO 4G connectivity goes in and out after rooting

Hi guys,
Please help me out here:
After I rooted and unlocked NAND on my EVO by following the guides on this forum (part 1 and part 2), my 4g connectivity is totally unreliable.
The connection switches between 4g and 3g a couple of times a minute. Sometimes the EVO will have a full 4g signal and an ip address (according to the settings app), but when I open the browser it says that there is no network connection. Switching the phone to 3g fixes the connectivity issue.
I live on the 14th floor of a high-rise and had full 4g signal before rooting. I have tried the stock ROM as well as the Bugless Beast ROM and I get the same results.
Does rooting and unlocking NAND somehow mess with the 4g radio in the EVO, anyone have this issue in the past? Please help, I don't want to take this thing back to Sprint and go for the iPhone

Have you updated the radio? Go to settings and see if you baseband is 1.39.00.05.31

4G Radio
What is your current baseband at?
you should be at 1.39.00.05.31 or higher. If you look for the Fresh .2 Rom, they have the Radio zip. reboot into recovery and flash with the new Zip it will update your Baseband radio will be updated.
I had issues with 4G connectivity I updated my radio and I am all set.
-Joshonekenobi

Yes, I just updated to the latest baseband and it's still doing the same thing.
The phone shows full signal on 4g and all of the sudden switches to 3g and back to 4g again. This occurs several times a minute.
Is there some way I can flash it back to completely stock ROM?
Thanks,
Rayden1000

i'm rooted via unrevoked and my 4g is spotty. rooted or not. for me I think its 4g not set up yet. It is a work in progress. I'm in St. Louis. Speeds suck as well.
Avg. 1.2 download 4g
Avg. 0.5 download 3g

I am in Baltimore, the first 4G market. I really don't think it has to do with coverage....before rooting (and even after rooting, when on 4G), I get about 3.6 down and 1 up (upload is capped at 1 by Sprint).
I also live in a high rise that's half a mile from Clearwire's 4G tower........my issue is that after rooting, the EVO is not locking to 4g, it keeps switching back and forth between 3g and 4g.
Rayden1000

rayden1000 said:
Yes, I just updated to the latest baseband and it's still doing the same thing.
The phone shows full signal on 4g and all of the sudden switches to 3g and back to 4g again. This occurs several times a minute.
Is there some way I can flash it back to completely stock ROM?
Thanks,
Rayden1000
Click to expand...
Click to collapse
Same issue here... Try this: go to settings and disable mobile networks (i.e. turn 3G off). When I do this, speed test works fine, but as soon as I try to do something real it disconnects and says there is no connection, even if it had a strong signal... not terribly useful!

L_Mo said:
Same issue here... Try this: go to settings and disable mobile networks (i.e. turn 3G off). When I do this, speed test works fine, but as soon as I try to do something real it disconnects and says there is no connection, even if it had a strong signal... not terribly useful!
Click to expand...
Click to collapse
L_Mo,
Were you having this issue before rooting (I am just assuming that you did root)? I swear that I did not have this issue before doing the full root and Nand unlock. When I just had Unrevoked root, I was using my Evo as my internet connection for my laptops for a full week with no issues and as a result I disconnected my Comcast cable internet.
I am just at a loss here, if I can't get this fixed, I will have to either flash the phone back to stock or take it back to Sprint for an exchange.
Rayden1000

I had the same problem after rooting. I am having better luck with Flipz stock rooted rom. I am using Flipz ota 1.32.651.6 rooted rom with the 1.39.00.05.31 radio. I wiped cache and delvic before flashing.
If this doesn't work for you you can get the stock RUU and reflash to unrooted stock.

jgarozzo said:
i'm rooted via unrevoked and my 4g is spotty. rooted or not. for me I think its 4g not set up yet. It is a work in progress. I'm in St. Louis. Speeds suck as well.
Avg. 1.2 download 4g
Avg. 0.5 download 3g
Click to expand...
Click to collapse
Unrevoked is a ***** root and couldn't possibly mess with your 4G, sorry to say!
And, to the rest of you, rooting would not mess with your signal at all unless you dropped your phone or some ****. Installing the newest radio would be my only recommendation. Or you can unroot it and try to exchange it for a different EVO.

erikjonpeterson said:
I had the same problem after rooting. I am having better luck with Flipz stock rooted rom. I am using Flipz ota 1.32.651.6 rooted rom with the 1.39.00.05.31 radio. I wiped cache and delvic before flashing.
If this doesn't work for you you can get the stock RUU and reflash to unrooted stock.
Click to expand...
Click to collapse
Thanks erikjonpeterson,
I am going to to download that ROM now.... I knew I wasn't crazy when I said that 4G worked fine before rooting. I am finding more and more info online about many people having the same issue
Rayden1000

rayden1000 said:
Thanks erikjonpeterson,
I am going to to download that ROM now.... I knew I wasn't crazy when I said that 4G worked fine before rooting. I am finding more and more info online about many people having the same issue
Rayden1000
Click to expand...
Click to collapse
I had the same issue. Reflashed the RUU and still had connection problems (good 4g signal, but use the internet and it drops and switches to 3g). Didn't have problems with my 4g data card though.
edit: I actually thought I messed something up myself before I even rooted. I was in a bad area and kept roaming even though I could get a weak Sprint signal so I switched it to Sprint only and I think I mightve messed with some other settings under that mobile network tab. What are the default settings?

So basically, something in the full rooting process (not the unrevoked one), f's up the baseband or access to the baseband? I am not an electronic engineer, but it's obvious that doing the full root messes up 4G.
Any senior members in the know have a fix for this? I already exchanged my Evo once because of several stuck pixels, it would look suspicious if I went back to the store again...
Rayden1000

rquinn19 said:
I had the same issue. Reflashed the RUU and still had connection problems (good 4g signal, but use the internet and it drops and switches to 3g). Didn't have problems with my 4g data card though.
edit: I actually thought I messed something up myself before I even rooted. I was in a bad area and kept roaming even though I could get a weak Sprint signal so I switched it to Sprint only and I think I mightve messed with some other settings under that mobile network tab. What are the default settings?
Click to expand...
Click to collapse
Default settings under Mobile Networks: Every option is checked.
Rayden1000

rayden1000 said:
So basically, something in the full rooting process (not the unrevoked one), f's up the baseband or access to the baseband? I am not an electronic engineer, but it's obvious that doing the full root messes up 4G.
Any senior members in the know have a fix for this? I already exchanged my Evo once because of several stuck pixels, it would look suspicious if I went back to the store again...
Rayden1000
Click to expand...
Click to collapse
Don't take what I said as a definite Evo or root problem. I'm curious as to if it's a 4g here in Philly problem. When I first bought the 4g card it was great, but wasn't using it so I returned it. Bought it again 4 months later and I returned that one because the 4g was terrible. I'm thinking 4g where I'm at sucks and is getting worse with more and more people jumping on it. I was a 3g early adopter so I'm not worried yet.
edit: I'm gonna go down to an area that's known to have a good 4g signal after work and sit around and do some "testing".

Which market are you in? Sprint has been doing a ton of testing in markets that aren't officially live yet.

I don't think it has anything to do with the ROM.
If when you are connected to 4G you can access the internet, only suddenly 4G it drops for no reason and switch to 3G and then reconnects to 4G and goes on and on, below is the solution. if when you are connected to 4G you can not access the internet at all, the below wont fix it for you and it is probably a problem with your rom.
You will need your msl code to fix this, loop up in the forums to to obtain your msl code from Sprint:
hit ##DATA# > Edit mode.
Put in your msl code
Chose WIMAX
Scroll down to Wimax_Idle_Sleep
Change the value from 10 to 300.
Click menu, commit changes and restart the phone.
This fixed it for me and i never drop 4g (when in good coverage) again.
Basically Sprint has some STUPID setting that tells 4g to go into "sleep mode" of no data is passed on the 4g connection after 10 seconds which is essentially disconnecting 4g.
The problem is it goes into sleep mode (disconnecting), but then rescans and look for a 4G signal > reconnects to 4g and if no data will be passed in 10sec it will do the same again in an endless loop.
10sec to put a connection into sleep mode is really low so change it to 300sec.
The odd thing is that this is only happening in certain locations and with certain towers.
I tried to call Sprint and explain about this issue but my attempts fell on death ears.
Go ahead and try the above. if it helps you please someone make this a sticky as you are not the first i see having the issue.

Valicore said:
Which market are you in? Sprint has been doing a ton of testing in markets that aren't officially live yet.
Click to expand...
Click to collapse
I am in baltimore, the first 4G market.

I have to tend to agree that something in "Part 2" is messing up something with 4G. I've done Part 1 and successfully "upped" the radio with no 4G loss. Living in $G Vegas, I would get solid 2 bars inside my office. Once I did Part 2 and redid the phone, I would get "jumping" from 3G to 4G...
I still have to wonder, when flashing the new radio, why (after Part 2) it gets "stuck" in formatting cache and you get no "confirmation" of an upgrade. I am an AnooBroid...but this just doesn't seem right to me.

(Edited) - This post is now obsolete... Teaches me to refresh the page on the Evo before posting!

Help. No LTE on rogers

Flashed touchwiz jellybean Rom. Had no lte. Flashed back to rogers original 4.0.4 and no longer have lte or 4g. Do I have to get into an lte area before It registers? I have my tab with me and it's getting 1 bar lte 4g in a weak area. Please help.

VarioIII said:
Flashed touchwiz jellybean Rom. Had no lte. Flashed back to rogers original 4.0.4 and no longer have lte or 4g. Do I have to get into an lte area before It registers? I have my tab with me and it's getting 1 bar lte 4g in a weak area. Please help.
Click to expand...
Click to collapse
Go into your Mobile Network settings, check "Access Point Name" and see if you're on the LTE apn.

kamandor said:
Go into your Mobile Network settings, check "Access Point Name" and see if you're on the LTE apn.
Click to expand...
Click to collapse
Yup. Could I have disabled lte?

same problem on 3 other roms
VarioIII said:
Flashed touchwiz jellybean Rom. Had no lte. Flashed back to rogers original 4.0.4 and no longer have lte or 4g. Do I have to get into an lte area before It registers? I have my tab with me and it's getting 1 bar lte 4g in a weak area. Please help.
Click to expand...
Click to collapse
I've had the same experience with three other roms I've flashed on my roger gs3. I have been through apn settings on all of the roms, but I still dont get LTE. When I recover the stock rom it goes back to 4g/lte every time. So, I'm sticking with the stock rom until there is a definitive fix. I'm nowhere near good enough at this to figure it out myself.
I suggest, if you want to keep receiving lte service, that you restore your stock rogers rom.
From what I've been reading on xda threads; it seems that this problem is central to the at&t/rogers/bell phones.
Roms I have tried:
d2can OTA keeproot
aokp_JB_d2att-ota-eng.task650-ktoonsez-10.3.2012c (this one is so bad ass; I might just put up with no lte)
Liquid smooth d2att jb v.2.0
NexusMod-Triune-II-(UX)-20120918-NIGHTLY

Are you basing the no lte status solely on the icon in your notification bar, or have you ran speed tests to confirm your network speed?

speed tested everytime
mrhaley30705 said:
Are you basing the no lte status solely on the icon in your notification bar, or have you ran speed tests to confirm your network speed?
Click to expand...
Click to collapse
No, unfortunately, when experiencing these 3g/h+ instead of 4g/lte problems, on the flashed jb roms, my download speeds are consistently under 5mb/s. When restored to stock rom they go up to almost 10mbs on 4g. I haven't been able to test the lte speeds yet because rogers towers somehow manage to miss my street, but are covering the college five blocks from here. I'll test again next time I'm on campus and see how they both fare.
There seem to be so many variables involved. I'm just trying to eliminate them one by one, so as not to confound the results.

I was thinking that the aosp roms don't usually have an lte icon.

Update:
mrhaley30705 said:
I was thinking that the aosp roms don't usually have an lte icon.
Click to expand...
Click to collapse
I had to give up on ktoonsez &task rom and go with CM10 nightly. This is after trying out cm cfx official rom, to no avail.
I was able to get 4g with cfx, task 650&ktoonsez,but only for a short time then they would automatically either lose signal, or switch to a different APN all together. Now I have around 13 mbps on CM10 with H+. I'll settle for that instead of sketchy hit or miss with the others. I'd like to figure out how to fix Task650&ktoonsez rom. I prefer that one so far after playing around with them all a bit.

Internet not working.

For the past week and a half, I've had internet issues when I'm on 3g. It works fine on wifi. I've switched between ROMs, kernels, modems, etc. I'm currently on Goodness with the MA6 firmware modem AIO and the anthrax kernel. I've tried updating the profile & prl. I have between 2-4 bars of 3g and yet it still gives me the webpage not available sign. I tried clearing the cache/ fixing the permissions. But the internet simply won't work. I'm in Maryland, between Baltimore and Frederick. What could the problem be? Maybe the phone itself is defective or Sprint's network died in my area?

I'd see if they're doing work i that area. I know in areas of Baltimore 4G is there, I believe. You could try using build prop tweaks ect for signal if you wanted.

Zin0 said:
For the past week and a half, I've had internet issues when I'm on 3g. It works fine on wifi. I've switched between ROMs, kernels, modems, etc. I'm currently on Goodness with the MA6 firmware modem AIO and the anthrax kernel. I've tried updating the profile & prl. I have between 2-4 bars of 3g and yet it still gives me the webpage not available sign. I tried clearing the cache/ fixing the permissions. But the internet simply won't work. I'm in Maryland, between Baltimore and Frederick. What could the problem be? Maybe the phone itself is defective or Sprint's network died in my area?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1815580&page=3
http://forum.xda-developers.com/showthread.php?t=2154344
Misery loves company.
The 2nd post is a thread I started regarding the same problem. The first post is to a thread I thought could help me. I tried some things mentioned in there but none of them worked. Then someone posted in the thread who is having the same problem.
Here's what I've been running into and what I tried. I am on FreeGS3, Anthrax kernel, and recently updated to MA6 when I started having problems. I use a battery saver so my internet connection turns off when my screen is off. I started noticing a week or so ago that when I woke up my phone, the 3g icon would appear but only the up arrow flashed. The download arrow wasn't doing anything. I would toggle it off and on and eventually get it to work. I'm in the Raleigh-Durham area and we are just starting to get LTE. My 4G works whenever I go through 4G areas and my wifi works. I have restored a working backup, wiped my phone, flashed back to stock unrooted, called Sprint (they refreshed my signal and had me do an OTA activation), manually changed my PRL, upgraded to MA6, updated profile (when I could get it work).........and I think that about sums it up. The one thing I've noticed is my phone works flawlessly when the network mode is set to CDMA. At this point I'm clueless. I really don't think it's a phone issue because 3g works on CDMA. It's like when the phone is set to CDMA/LTE and it doesn't have an LTE signal, it doesn't know what to do. That up arrow flashes in such a rhythm that it's like the code is stuck in a loop.

[Q] Bell Canada i747m losing connection

hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.

itrunner said:
hey gang i'm running the latest aokp task650 build on my S3 I747m. Everything works awesome, except i occasionally lose my data connection. I'll notice my connection status bars are gray, and typically a reboot will fix it. I'm sure going into airplane mode and back out from that would re-establish the connection too.
my APN is set correctly, i compared it to a friends nexus which is not rooted.
Right now i'm set as pda.bell.ca
I've flashed the latest bell modem file (that i'm aware of).
Anyone have any suggestions? i'm pretty new to all of this.. not sure what to do to troubleshoot.
Click to expand...
Click to collapse
I've been having problems lately when I have poor 4G (LTE) signal. My phone would rather hang around on the LTE network with little to no signal before it switches over to 3G. It's been doing this for a while on the Rogers network for me. I can see when I check the battery stats just how much time is spent without signal which is a lot. At work I get full bars 3G when at my desk but very poor 4G. The only thing causing me to loose signal is the poor transition back and forth between the two networks. Changing modems has absolutely no affect on this matter and I've put the APN's and network modes through the ringer with no change either. I've tried it all and nothing improved it. When I walk outside I immediately hit full bars 4G. Just when I'm inside my work and at home, I get poor lingering 4G. I wish the thresholds for when it switches over were better. I usually just turn off LTE all together which sucks but oh well.
I don't think we are the only people with this either. I've read grumblings about others noticing the same thing.
If curious, I'm running the latest CM10.1 nightly with Ktoonsez kernel on the Rogers network in Ottawa.

Interesting, that could very well cooincide with what i'm seeing. I tend to bounce from 4G to H+ or 3G, i wonder if it's trying to hang onto 4G.
Is there a way to force it to stay on 3G? that might be a good test

I was getting the same issue.
I did a factory reset and reinstalled my ROM plus GAPPs and the issue resolved itself.
I am using the latest modern right now and not my bell one. I think it's from a south American carrier, but bit 100% sure of the top of my head. But it is in the current modern thread
Sent from my SGH-I747 using xda app-developers app

[Q] I need help with my signal!

I have been in many many roms with my galaxy, from Touchwiz to cyanogenmode and liquidsmooth and many others, but one day, I recognize that my signal was really poor. I broke my screen and i replacement by my self i was really careful about didnt touching any other thing that was not part of the screen, but maybe, just maybe i scratch my antenna? There is anyway to check if my signal it's not good as before because of that? Also there are places where i have signal like my house and the speed is really fast, but there are also places where i have full signal and my speed is crap, and there are places were i lose my signal too frequently. I feel like my signal have been deplore slowly. Or it's just.. that sprint LTE is really bad?

first try updating your prl
next if youre on a MD4 TW rom, flash the md4 modem
also try updating your profile
if nothing works try one of the signal refresh apps from the play store
also it may be the rom
if none of the above helps its probably hardware related or it could just be that sprint is upgrading their towers and the one nearest to you is offline for the upgrade...

All AOSP based roms show's your true signal in the noti bar ( Data Bars )
TW JB has an extra signal so it looks like you have good signal but you don't.
Checking signal strength is in
About Phone > Status > Signal Strength.
Usually -75 to -99 is good to really good signal.
But if you think your actual signal is a little far-fetched. Download SpeedTestNET from
Google Play and look at your ups and downs.
My signal is around -80 dbm and my ups are 1 mb and my downs are 3-5 mbs ( It shucks :3 )
There are 3g / Wifi Speed Tweaks you can find around xda or google.
And if it has to come to it, if your on TW JB Rom, Turn off or Freeze your Sprint Connections Optimizer.
That auto connects to frequent used Networks, Wifi Terminals and towers that had the best connections for you before
and sometimes it'll connect to a good tower that's located really far ( I don't know why but I've experienced it... )
Use apps that recalibrate your Radio as well if it helps, A lot of people say it's not worth it, and sometimes it IS just a placebo
and it tricks ya but if it works it works.

Verizon PRL but only for talk.
Hey guys, I was wondering is there a way I can switch to Verizon's towers when I make a call, but only use Sprint's towers for data? didn't want to make a new thread about this in the Q&A since I can't actually post where the Sprint PRLs are yet, but I have horrible reception in my house. I roamed to Verizon's towers constantly when I switched PRLs a couple months ago and I got in trouble because I went over 300MB of data. Thank you all.

eisawi99 said:
first try updating your prl
next if youre on a MD4 TW rom, flash the md4 modem
also try updating your profile
if nothing works try one of the signal refresh apps from the play store
also it may be the rom
if none of the above helps its probably hardware related or it could just be that sprint is upgrading their towers and the one nearest to you is offline for the upgrade...
Click to expand...
Click to collapse
I am gonna try this.. but what it's profile? i really dont get it..

Ambkor said:
I am gonna try this.. but what it's profile? i really dont get it..
Click to expand...
Click to collapse
This. Menu > settings > System update

CNexus said:
This. Menu > settings > System update
Click to expand...
Click to collapse
it's there is anyway to do that on Cyanogenmode or an AOSP rom?

sadly no... but your signal might be because your on an aosp rom... they arent as stable as touchwiz roms...

There's a few unofficial ported AOSP roms that have the sprint update feature, I'm not to sure which ones but i've seen them.
They only updates profile, im not to sure about PRL. It's best to update on a TW based Rom because it's easier, it takes
awhile switching between the two just to update though.
On a stock TW JB Rom, on home screen press your menu button.
Select Settings or System Settings.
Scroll all the way down and select System Updates.
Select Update PRL.
Wait for it to be done.
Select Update Profile.
Wait for that to be done.
Reboot your phone.
Make sure your data is connected, if it's slow be patient let it take time to update Profile and PRL.
Noted that as long as your on the Rom based on what firmware it is. ICS or JB. It doesn't matter which
modem you choose, just as long as its based on one or the other.
For example. Being on an MD4 Rom you'll still be able to have 3g / 4GLTE Data with an LJ7 Modem, or
LI3 rom with an LF9 modem. Remember changing your modem YMMV, or Your Mileage May Vary, almost everyone
who switches modems that have the best stability for them they either have better data speeds. Or They're not
being dropped as often or not at all when near a tower.
For me, around my area, using an MD4 Rom, I'm using the LJ7 modem, because all the other modems I have tried either
dropped my data ( Not connected to towers even though there's one near me. ) Or I'd have to reboot my phone just to get it back.
and when im on an AOSP Rom, I'm usually using LF9, Because i've tested my data speeds on it and that's the highest out of all i've used
+ I don't get my data cut off or dropped.
@ eisawi99
Most AOSP Roms have 3G and WiFi tweaks to help with stability. But the downer part of using AOSP Roms is it doesn't get along with
trying to connect to 4G LTE, I have 4G LTE in my area, when using a TW rom it'll instantly connect when ever it's got a strong signal.
While on an AOSP Rom, It rarely ever does even if im almost sitting next to it.
Sometimes it's also the APN's that are being configured via script tweaks. I usually just remove all my old APN's and use all of sprint's
APNs when ever i can't send or recieve a text or mms, but it'll also help with data connection stability too.