Hi all,
Trying to figure out why every tarball I download from Goo.IM for the I747M d2can gives a checksum error when trying to apply it through Odin. Has anyone else experienced this?
Thanks!
Ate you changing the name of the tar file before you try to Odin it?
mrhaley30705 said:
Ate you changing the name of the tar file before you try to Odin it?
Click to expand...
Click to collapse
Unfortunately learned that the hard way with CWM backups, but no I downloaded it directly and put it right onto C:\, so its not a renaming problem. Thanks for the suggestion though!
Related
So I followed the sticky on rooting my friends SGS3 but I cannot get odin 3.04 to read the CWM-Recovery-LTE-SGS3-Sprint-v5.zip file. It doesnt even show up at all when I open the pda section to select the file. I even tried to rename it from .zip to .tar and .tar.md5 but even with .tar it detects it but it wont flash it it has an error. On the phone it has red letters that say something like unsupported dev_type.
i used this..
http://forum.xda-developers.com/showthread.php?t=1746680
try it.
Did houbtry to open the zip and see if there was a tar inside?? I have had that happen a few times.
Sent from my SPH-L710 using xda app-developers app
Eric-1987 said:
So I followed the sticky on rooting my friends SGS3 but I cannot get odin 3.04 to read the CWM-Recovery-LTE-SGS3-Sprint-v5.zip file. It doesnt even show up at all when I open the pda section to select the file. I even tried to rename it from .zip to .tar and .tar.md5 but even with .tar it detects it but it wont flash it it has an error. On the phone it has red letters that say something like unsupported dev_type.
Click to expand...
Click to collapse
Hello. Do yourself a BIG favor and click http://www.youtube.com/watch?v=XoEVDgjTTdg&list=PL7011CD883D5201B8&index=12&feature=plpp_video. Follow the video by QBKing77. This is what I followed to ROOT my Samsung Galaxy S III. :good:
Have Fun.
Wolfbeef123 said:
i used this..
http://forum.xda-developers.com/showthread.php?t=1746680
try it.
Click to expand...
Click to collapse
Ghost Protocol said:
Hello. Do yourself a BIG favor and click http://www.youtube.com/watch?v=XoEVDgjTTdg&list=PL7011CD883D5201B8&index=12&feature=plpp_video. Follow the video by QBKing77. This is what I followed to ROOT my Samsung Galaxy S III. :good:
Have Fun.
Click to expand...
Click to collapse
I would personally go with this method. I never use QBKing's videos, but I'm thinking its the same one he uses.
I'm to lazy to look up the file names but you are either trying to load a .zip into Odin when you need to extract a .tar file, or you are trying to load a .zip file meant to be flashed in recovery instead of Odin.
EDIT: Actually, I used this method. At the time I tried it was by far the easiest I saw. Just download the .zip in that thread, unzip it, load it in Odin, root.
gpgorbosjr said:
I would personally go with this method. I never use QBKing's videos, but I'm thinking its the same one he uses.
I'm to lazy to look up the file names but you are either trying to load a .zip into Odin when you need to extract a .tar file, or you are trying to load a .zip file meant to be flashed in recovery instead of Odin.
EDIT: Actually, I used this method. At the time I tried it was by far the easiest I saw. Just download the .zip in that thread, unzip it, load it in Odin, root.
Click to expand...
Click to collapse
I was on lg8.. unrooted using odin 3.04... reflashed using 3.04 and epic recovery... all qbkingg77 tips with no problem
Eric-1987 said:
So I followed the sticky on rooting my friends SGS3 but I cannot get odin 3.04 to read the CWM-Recovery-LTE-SGS3-Sprint-v5.zip file. It doesnt even show up at all when I open the pda section to select the file. I even tried to rename it from .zip to .tar and .tar.md5 but even with .tar it detects it but it wont flash it it has an error. On the phone it has red letters that say something like unsupported dev_type.
Click to expand...
Click to collapse
Could you link us to the method you are using, or pick one of the many methods we suggested and we'll try and get you through it?
Hello Again. I suggest, if you DO NOT WANT TO BRICK YOUR PHONE, following the video by QBKing77. Also, this http://forum.xda-developers.com/showthread.php?t=1726558 (link) will help you feel at home.
Hi there
Back in September, there was a leaked rom of the JB update for Bell. I flashed it successfully and everything went smoothly. But in November, Bell released the official JB update, and I'd like to flash that.
I downloaded Samsung-Updates.com-SGH-I747M_BMC_1_20121121150017_8dyms8nejb.zip from Samsung-Updates.com, but not sure what to do with it. When I put it on the phone, and try and instal it from the recovery screen, it fails.
I've looked at various posts, but can't find the answer to my 2 questions.
- Am I using the proper update from the site mentioned above?
- And how do I go about flashing this onto the phone? (I tried ODIN, but in the PDA, there are options for md5, tar, gz, etc, but not .zip files. I'm just being cautious so that I don't brick my phone.
Thanks in advance...
xboarder said:
Hi there
Back in September, there was a leaked rom of the JB update for Bell. I flashed it successfully and everything went smoothly. But in November, Bell released the official JB update, and I'd like to flash that.
I downloaded Samsung-Updates.com-SGH-I747M_BMC_1_20121121150017_8dyms8nejb.zip from Samsung-Updates.com, but not sure what to do with it. When I put it on the phone, and try and instal it from the recovery screen, it fails.
I've looked at various posts, but can't find the answer to my 2 questions.
- Am I using the proper update from the site mentioned above?
- And how do I go about flashing this onto the phone? (I tried ODIN, but in the PDA, there are options for md5, tar, gz, etc, but not .zip files. I'm just being cautious so that I don't brick my phone.
Thanks in advance...
Click to expand...
Click to collapse
there should be a tar file in the zip just unzip the file you downloaded
jerrycoffman45 said:
there should be a tar file in the zip just unzip the file you downloaded
Click to expand...
Click to collapse
There are only 2 files in the zip file.
KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
SS_DL.dll
Thanks for replying.
Can I flash the md5 file with ODIN? What's the purpose for the dll then?
xboarder said:
]KIES_HOME_I747MVLDLK4_I747MOYCDLK4_538866_REV04_user_low_ship.tar.md5
Click to expand...
Click to collapse
^^^ This is what you want to use in the PDA section. You can ignore the DLL.
Yeah just flash the md5 file in odin as PDA. I have no idea what the dll file is for
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I just flashed the .md5 with ODIN, and it's working great.
Thanks to all of you for your quick response and help. Very much appreciated.
Hello all. I have posted this problem/question before but received no help. So im posting it again. I recently rooted my S3 and installed cyanogenmod and decided I like touchwiz so I decided to unroot it. So I installed triangle away to delete any traces of root and the process was completed nicely. Then I flashed a stock rom that I downloaded online. Then I did a stock factory reset. But it doesnt feel right. There are slight graphics glitches with opening some apps. Like opening facebook messanger will display white and black lines untill it loads up. I tried the whole reinstall thing and no help. There are other similar glitches. Can anyone help me? I want my s3 fully stock like it was straight from att.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
dima470 said:
Then I flashed a stock rom that I downloaded online.
Click to expand...
Click to collapse
I would try another file download location (which you did not specify where you downloaded from). You might also try and redownload and ensure to do an MD5 check. Of course this means factory resetting again and ODIN.
If nothing else, download rooted ROM from Mr.Robinson's post and unroot it. This will keep your flash counter as is.
aybarrap1 said:
I would try another file download location (which you did not specify where you downloaded from). You might also try and redownload and ensure to do an MD5 check. Of course this means factory resetting again and ODIN.
If nothing else, download rooted ROM from Mr.Robinson's post and unroot it. This will keep your flash counter as is.
Click to expand...
Click to collapse
Thank You for your quick responce. I downloaded the rom from a video i found on YouTube.(doesn't seem reliable huh...) How do i do an MD5 check?
dima470 said:
Thank You for your quick responce. I downloaded the rom from a video i found on YouTube.(doesn't seem reliable huh...) How do i do an MD5 check?
Click to expand...
Click to collapse
Follow this thread for downloading stock roms: http://forum.xda-developers.com/showthread.php?t=1968625. After unzipping most should end with the file name .md5. ODIN will do the md5 check automatically for you. Just pay attention to the prompts.
If you find that this does not work, go here and download rooted rom to be flashed via ODIN. You can then remove root.
If the file is not ODIN flashable with an md5 at the end, look for a long string of digits and letters that should be right by the download. A good example to know what I am talking about is to take a look at the site for rooted stock roms. Notice the md5 under the Old image AT&T file download link. Download and extract this file and follow the directions.
aybarrap1 said:
Follow this thread for downloading stock roms: http://forum.xda-developers.com/showthread.php?t=1968625. After unzipping most should end with the file name .md5. ODIN will do the md5 check automatically for you. Just pay attention to the prompts.
If you find that this does not work, go here and download rooted rom to be flashed via ODIN. You can then remove root.
If the file is not ODIN flashable with an md5 at the end, look for a long string of digits and letters that should be right by the download. A good example to know what I am talking about is to take a look at the site for rooted stock roms. Notice the md5 under the Old image AT&T file download link. Download and extract this file and follow the directions.
Click to expand...
Click to collapse
I tried Mr. Robinson's rooted stock rom, and it has the exact same issue.... Is it all just in my head? Please do help. My S3 isn't perfect anymore and i'm really OCD about it. I regret ever rooting.
I'm trying to flash back to the Stock firmware with TWRP. I have the zip file on my SD card but when I try to flash it is reporting that it is unable to open the zip. I confirmed that the file is downloaded correctly and not corrupt as I am able to access/extract it on my PC without issue. Any ideas on how to get past this?
Its probobly an ODIN zip not a CWM zip. Extract the zip and if it has a .pda in it then you have to use ODIN on your PC
mrevankyle said:
Its probobly an ODIN zip not a CWM zip. Extract the zip and if it has a .pda in it then you have to use ODIN on your PC
Click to expand...
Click to collapse
It has an md5 in it...
danmanca said:
It has an md5 in it...
Click to expand...
Click to collapse
An MD5 is just an integrity check file. What is the name of the zip and where did you get it?
mrevankyle said:
An MD5 is just an integrity check file. What is the name of the zip and where did you get it?
Click to expand...
Click to collapse
The name of the Zip file is
SGH-I317_ATT_I317UCAMA4_I317ATTAMA4.zip
I downloaded it from a couple locations that listed it as the stock AT&T firmware for this phone. Each location same error.
danmanca said:
The name of the Zip file is
SGH-I317_ATT_I317UCAMA4_I317ATTAMA4.zip
I downloaded it from a couple locations that listed it as the stock AT&T firmware for this phone. Each location same error.
Click to expand...
Click to collapse
Im pretty sure that the one you downloaded is just zipped factory firmware and not flashable zip. You will need to extract tar file inside if there is one and flash Via Odin. If you are using it for att there is one that you can flash via twrp from link below.
http://forum.xda-developers.com/showthread.php?t=2274854
Sent from my SGH-I317M
Ah thanks for the help, I think thats my problem. Testing with the link you provided. Thanks.
I wonder why we see a lot of people asking questions here about install errors from files they got at some random (and often unheard of) sites around the Internet? Don't people know that xda has all the files they could need?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
Hi Guys!
I need some help here. I have a galaxy s3 I747M . After I loaded the lastest 4.3 Jellybean I lost use of my USB port. I've tried everything I can do to make it work. Nothing has worked. I was on the phone with Samsung for 2 hours trying to fix this issue. I can charge my phone using the port, but that's all I can do. A house hold of Samsung phones, so I have tried all 6 other cables in the house etc. PC's don't see my phone(I've tried 5 different pc's btw) Nothing has worked. The highest Tech support Samsung can offer didn't help either. Seems under my Application manager under all apps. The USB setting is doing absolute nothing. Sitting at 0.00B... Tech guys says something went wrong with the loading of the 4.3 firmware. So he regrets to tell me that my phone is no longer under warranty and there isn't anything he can do. Like I mention I have hard reset to factory settings 4-5 times and nothing works. I know someone is going to say did you check off the Debugging... Yes I have. So there you go. I am unable to use ODIN to reflash firmware because the usb port doesn't work.
If someone can help me, that would be terrific. I should mention that I also tried using the SD Card and tried loading some firmware that I downloaded and tried using the Recovery Option boot to try to load the firmware that I got but I keep getting a error of "E Signature verification failed"
Samsung Galaxy S3
SGH-I747M
4.3 firmware
I747MVLUEMK5
Rogers Network Canada
Did you try different operating systems? You won't be able to load any custom software with a custom recovery.
I haven't no, I'm not sure how I would go about this. Like I mentioned, I've tried to put a md5 on my SD Card and tried to update that way, but keep getting an error. "E Signature verification failure" If I'm way off on how'd I'd do this, please do tell. I'm desperate and am willing to try anything...
BigPapaDune said:
I haven't no, I'm not sure how I would go about this. Like I mentioned, I've tried to put a md5 on my SD Card and tried to update that way, but keep getting an error. "E Signature verification failure" If I'm way off on how'd I'd do this, please do tell. I'm desperate and am willing to try anything...
Click to expand...
Click to collapse
can anyone help me on this???
If you are rooted, and were previously updated to 4.3 firmware, and if im reading correct are just trying to reflash that firmware, you can try using Mobile Odin. It won't flash the full firmware, but will do the kernel, modem, system and cache. Might be worth a shot. Otherwise look for a recovery flashable zip for the firmware. The .tar.md5 can only be used by Odin or Mobile Odin.
DocHoliday77 said:
If you are rooted, and were previously updated to 4.3 firmware, and if im reading correct are just trying to reflash that firmware, you can try using Mobile Odin. It won't flash the full firmware, but will do the kernel, modem, system and cache. Might be worth a shot. Otherwise look for a recovery flashable zip for the firmware. The .tar.md5 can only be used by Odin or Mobile Odin.
Click to expand...
Click to collapse
Hey Thanks for the reply "DocHoliday"
I am not rooted. I wish I was. I've poked around and I'm not sure how to use an .img file. I tried to put it on a micro SD and open it. I get a "E: Signature verification failed" Now all I did was throw the whole zip file on the SD card. Not sure if I have to extract it or what. If you can shed some light on how to do this I'd be a happy camper. All I can find is a JB 4.1.1 flashable zip.. I know i'm 4.3...Will this one work?
No. Do not flash older firmware over 4.3. It'll brick. Older roms are ok, but not the firmware. Can you link to what you are trying to flash? You said you were using an .md5 file earlier, but now you said you tried an .img and a .zip? I'm kinda confused as to exactly what you are trying to flash at this point. Zip files are for flashing in recovery. .tar.md5 files are for Odin. .img files are used differently.
DocHoliday77 said:
No. Do not flash older firmware over 4.3. It'll brick. Older roms are ok, but not the firmware. Can you link to what you are trying to flash? You said you were using an .md5 file earlier, but now you said you tried an .img and a .zip? I'm kinda confused as to exactly what you are trying to flash at this point. Zip files are for flashing in recovery. .tar.md5 files are for Odin. .img files are used differently.
Click to expand...
Click to collapse
Well Doc, I'm kinda confused as well, LOL... I was using odin files at first. not really knowing what i'm doing. I'm kind of starting to understand a few things like, .tar & .md5 files are used with Odin. I can't use odin because my usb on my S3 isn't working. So i'm trying to flash my firmware to either earlier(which I can't because i'm not rooted) or the same. In hopes to try to fix my usb port. My firmware is corrupted. So i've tried to put a stock 4.1.1 recovery zip on my sd card. But when I restart the s3 in recovery mode, and choose the zip file I get "E;signature verification failed" and it does nothing. I can't find a stock img zip file for i747M Rogers canada 4.3... I'm thinking i'm doomed here. What do you think??