Disable lte and force HSDPA on aosp - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Hello i am enduring the hurricane and I lost power, peco statement says it could be out for days. I really need to disable lte so I can get data without killing my battery. I already burned a good amount of my battery searching on how to do this but couldn't find anything yet
I'm on aosp so dialing *#2263*# does nothing.
When I try selecting my old HSDPA APN (att) it won't connect to anything. And I when I switch my network mode in data settings it just won't let me select wcdma.
Seriously I need a miracle. I don't have much juice left.. if I don't make it.... send help
Jk I'm not flooded or anything lol i just need internet.

Dial *#*#4636#*#* and choose wcdma preferred.

This doesn't work for me. It just pops right back to lte. I'm on tasks aokp.
Sent from my SGH-I747 using xda app-developers app

Settings>Wireless 7 Networks (More...)>MobileNetworks>Network Type> Choose the one without HSPA one without LTE. Should say something like GSM/HSPA. If this doesn't work then you will need to try something else...

Under those settings I have lte/gsm/wcdma and gsm/wcdma.
I can't switch off the lte one. It just goes back. There is another setting "use 2g networks only" and this also does not work. I am using tasks latest aokp ROM and toonz latest kernel. Maybe i should try another radio?
Using uclh9 radio.
Sent from my SGH-I747 using xda app-developers app

Bump. Does anybody know how I can disable LTE? Tried both methods in this post and i can't disable it.

To do this you also have to set the phone and mms APN. I rememebr a few times on my Note getting it to switch and stay after switching APNs to phone then choosing wCDMA otherwise it just goes back to LTE. PTA will lock you to LTE. Also it may lock to LTE in the radio load.

shansmi said:
To do this you also have to set the phone and mms APN. I rememebr a few times on my Note getting it to switch and stay after switching APNs to phone then choosing wCDMA otherwise it just goes back to LTE. PTA will lock you to LTE. Also it may lock to LTE in the radio load.
Click to expand...
Click to collapse
Where can I set the MMS APN?
Changing my APN to wap.cingular won't connect to anything. I'm not 100% sure but I could of sworn I used to be able to just select the wap.cingular and it would connect to hspa. Not sure what happened mabey at&t cracking down

jefferson9 said:
Where can I set the MMS APN?
Changing my APN to wap.cingular won't connect to anything. I'm not 100% sure but I could of sworn I used to be able to just select the wap.cingular and it would connect to hspa. Not sure what happened mabey at&t cracking down
Click to expand...
Click to collapse
To change the APN you go to settings > under network click "more" > click Mobile Networks > Access Point Names
But you need to know the APN Settings. Idk what they are for no LTE.
And I have same issue, select wap.cingular and I get no data

geoldr said:
To change the APN you go to settings > under network click "more" > click Mobile Networks > Access Point Names
But you need to know the APN Settings. Idk what they are for no LTE.
And I have same issue, select wap.cingular and I get no data
Click to expand...
Click to collapse
Wap Cingular is the no lte apn, but like you've found out its not working anymore for some people. Works for me, but my hsdpa is one quarter its normal speed.
Sent from my SGH-I747 using Tapatalk 2

jefferson9 said:
Hello i am enduring the hurricane and I lost power, peco statement says it could be out for days. I really need to disable lte so I can get data without killing my battery. I already burned a good amount of my battery searching on how to do this but couldn't find anything yet
I'm on aosp so dialing *#2263*# does nothing.
When I try selecting my old HSDPA APN (att) it won't connect to anything. And I when I switch my network mode in data settings it just won't let me select wcdma.
Seriously I need a miracle. I don't have much juice left.. if I don't make it.... send help
Jk I'm not flooded or anything lol i just need internet.
Click to expand...
Click to collapse
How do I turn lte back on after dialing that? Redialing it does nothing.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

xavierpunkreno said:
How do I turn lte back on after dialing that? Redialing it does nothing.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Hey guys, if you would like the correct HSPA+ APN to switch to on AT&T, please see my signature and use the APN in the OP of my thread.

Related

Data issues

Seems like my phone is fluctuating on edge and 4G signals ways too much as compared to other phone I had on the network.
Is it me or others are having the same issue as well
Sent from my SGH-T999 using xda app-developers app
vikramdhani said:
Seems like my phone is fluctuating on edge and 4G signals ways too much as compared to other phone I had on the network.
Is it me or others are having the same issue as well
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I do too. Pisses me off. It does it in full 4g areas too. Also, it drops data connection. Was trying to watch the Olympics earlier and it kept kicking off data. :banghead:
Sent from my SGH-T999
same plus
vikramdhani said:
Seems like my phone is fluctuating on edge and 4G signals​ ways too much as compared to other phone I had on the network.
Is it me or others are having the same issue as well
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Me too plus crazy force restarts about three a day
vikramdhani said:
Seems like my phone is fluctuating on edge and 4G signals ways too much as compared to other phone I had on the network.
Is it me or others are having the same issue as well
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Your not the only one
http://forum.xda-developers.com/showthread.php?t=1759785
http://forum.xda-developers.com/showthread.php?t=1756280
If you want to stay just on 4g and eliminate the phone going edge completely, you can dial *#*#4636#*#* or download an app called "phone info", select Device Information", then halfway down there's a dropdown (currently on GSM auto). Select WCDMA only.
There's also a new radio if you don't already have it that is supposed to be better at holding on to 4g longer
http://forum.xda-developers.com/showthread.php?t=1825112
i thought i was the only one. talked to tmobile and got a replacement. it still does it on occasion. One thing i did was to change the APN of the phone to a known T-Mobile alternate. it seems to have fixed the issue. if you change your APN to these settings, no more drops, and no more high ping issues.
Name : T-Mobile US 2
APN : internet2.voicestream.com
Proxy : not set
Port : not set
User name : not set
Password : not set
Server : not set
MMSC : http://mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy : not set
MMS port : not set
MCC : 310
MNC : 260
Authentication type : not set
APN type : default,mms,supl
APN protocol : IPv4
Enable/disable APN : APN enabled
Bearer : Unspecified
those settings were for my old unlocked iphone. same speeds, lower ping, no more drops.
aznmode said:
Your not the only one
http://forum.xda-developers.com/showthread.php?t=1759785
http://forum.xda-developers.com/showthread.php?t=1756280
If you want to stay just on 4g and eliminate the phone going edge completely, you can dial *#*#4636#*#* or download an app called "phone info", select Device Information", then halfway down there's a dropdown (currently on GSM auto). Select WCDMA only.
There's also a new radio if you don't already have it that is supposed to be better at holding on to 4g longer
http://forum.xda-developers.com/showthread.php?t=1825112
Click to expand...
Click to collapse
Thanks i will try the new radio and i was wondering if there a way i can cancel the all time 4G mode if i dont need it ?
vikramdhani said:
Thanks i will try the new radio and i was wondering if there a way i can cancel the all time 4G mode if i dont need it ?
Click to expand...
Click to collapse
Just change it back to GSM auto(default) or WCDMA preferred.
Sent from my SGH-T999 using Tapatalk 2

No LTE (Ktoonsez AOKP)

Hello,
I'm having an issue with the rom I have (AOKP Ktoonsez) when I turn on data I get H+ at the top. How do I get LTE? I went into that menu by putting in *#*#4636#*#* in the dial pad and putting it into GSM/LTE, but I still get H+. I'm with Virgin Mobile Canada. Here's my APN info:
Name: Bell
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port:80
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mms.bell.ca/mms/wapenc
MMS Proxy: web.wireless.bell.ca
MMS Port: 80
MCC:302
MNC: 610
Authentication Type: Not set
APN Type: Not set
Anything missing? This rom does have LTE and I went into the FAQ page, the dial pad method was the only way we could turn LTE on. Thanks.
Sent from my SGH-I747 using xda app-developers app
I'm on att so I'm not entirely useful in the regard to the fact tour on virgin, but are you absolutely sure that apn set up is for lte, that's the first thing I would check.
Sent from my SGH-I747 using Tapatalk 2
Yea I know you can get lte working just do a search there is a thread on it and it has everything you need to get it working.
Sent from my SGH-I747M using xda app-developers app
Delete all your apns. Do a new one for bell lte. Then changed preferred network to lte/gsm. Restart phone right after. You should be able to start seeing 4G now. Make sure you remember to restart phone after you change the settings.
Sent from my SGH-I747 using xda app-developers app
Alright, I think I'm going to call them to get the LTE APN in case I am actually missing something. Otherwise I may need a SIM card change.
Papaniz said:
Alright, I think I'm going to call them to get the LTE APN in case I am actually missing something. Otherwise I may need a SIM card change.
Click to expand...
Click to collapse
In the *#*#4636#*#* menu under phone information, try setting it to LTE only and see what happens. I keep getting H+ or less on my CM10 rom unless I do that even when I'm in an LTE area.
Make sure you have LTE/HSPA enabled in Settings>Wireless and Networks (More...)>MobileNetwork>Network Mode. Sometimes when I flash a new rom it changes. I have it HSPA only because saves battery.
Lessaj said:
In the *#*#4636#*#* menu under phone information, try setting it to LTE only and see what happens. I keep getting H+ or less on my CM10 rom unless I do that even when I'm in an LTE area.
Click to expand...
Click to collapse
DarthDerron said:
Make sure you have LTE/HSPA enabled in Settings>Wireless and Networks (More...)>MobileNetwork>Network Mode. Sometimes when I flash a new rom it changes. I have it HSPA only because saves battery.
Click to expand...
Click to collapse
When I set it to LTE only, I lose signal to my carrier does that mean anything at all? And for the options under settings I only have a choice between two, GSM/WCDMA/LTE and GSM/WCDMA preffered.
Papaniz said:
When I set it to LTE only, I lose signal to my carrier does that mean anything at all? And for the options under settings I only have a choice between two, GSM/WCDMA/LTE and GSM/WCDMA preffered.
Click to expand...
Click to collapse
Pick the lte mode and click the lte apn and restart your phone right away. It should work right after. Btw if it says 4g,it means lte is working
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Also a Virgin Mobile Canada customer and my S3 has NEVER said 4G or LTE in the signal bar.... H+ is what it displays on stock touchwiz, AOKP CM10...
I'm a Virgin Mobile Canada customer as well. I've set my preferred network type to LTE/GSM auto (PRL) by accessing the "Testing" menu (dial *#*#4636#*#*) and have selected LTE/GSM/WCDMA by going into my mobile network settings. The only two modes I can select from are LTE/GSM/WCDMA and GSM/WCDMA preferred
I've noticed the following:
-most of the time I'm on either the HSPA or HSPA+ network
-there are times at which my notification bar shows 4G (which I assume is LTE) but it definitely isn't as frequent as when my phone was unrooted and on stock
-this one is weird: occasionally I lose total mobile and data connection for about a few seconds and a "warning" icon shows up in the top left corner of the notification bar. When I expand notifications it says that the connection to the VIRGIN mobile network has been lost..or something along those lines. I'm usually able to reconnect automatically within a few seconds but this is definitely a weird one since I've noticed it only after flashing Task&Ktoonsez AOKP. Anyone encounter anything similar to this?
Deoxlar said:
Pick the lte mode and click the lte apn and restart your phone right away. It should work right after. Btw if it says 4g,it means lte is working
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
hedphones said:
Also a Virgin Mobile Canada customer and my S3 has NEVER said 4G or LTE in the signal bar.... H+ is what it displays on stock touchwiz, AOKP CM10...
Click to expand...
Click to collapse
OmarRaza91 said:
I'm a Virgin Mobile Canada customer as well. I've set my preferred network type to LTE/GSM auto (PRL) by accessing the "Testing" menu (dial *#*#4636#*#*) and have selected LTE/GSM/WCDMA by going into my mobile network settings. The only two modes I can select from are LTE/GSM/WCDMA and GSM/WCDMA preferred
I've noticed the following:
-most of the time I'm on either the HSPA or HSPA+ network
-there are times at which my notification bar shows 4G (which I assume is LTE) but it definitely isn't as frequent as when my phone was unrooted and on stock
-this one is weird: occasionally I lose total mobile and data connection for about a few seconds and a "warning" icon shows up in the top left corner of the notification bar. When I expand notifications it says that the connection to the VIRGIN mobile network has been lost..or something along those lines. I'm usually able to reconnect automatically within a few seconds but this is definitely a weird one since I've noticed it only after flashing Task&Ktoonsez AOKP. Anyone encounter anything similar to this?
Click to expand...
Click to collapse
Hmm maybe this is just Virgin Mobile problem? Thing is the ROM I was on before, (Team Insomnia JB Touchwiz) it showed 4g when I turned on the mobile data but I was getting no where near LTE speeds. I also tried switching to LTE mode and clicking the LTE APN and reboot, but all it does is go back to WCDMA Preferred mode. I got a SIM replacement from Virgin Mobile but still no luck after this.
EDIT: I think I got it, if you recently were on a Virgin Mobile Supertab or changed from an older phone that didn't have LTE, make sure that Virgin Mobile systems know that you own a Galaxy S3. I went into my Virgin Mobile "My Account' and it showed my phones it only listed the HTC Legend I had few months ago, but not the S3 itself, and beside it saying this device runs on a HSPA+ network. I'm getting this fixed on Monday so I'll see what happens then. If somebody can do it sooner though if they have the same issue, that would be great too.

LTE/CDMA in ro.radio.networkmode screws up phone.

Hi, guys I recently ran into an issue with the build prop modification in regards to network selection. If I enable the network selection as pointed out in one of the other threads and select LTE /CDMA my phone will lock on LTE however no phone calls can be made out or recieved. I had to reflash to 10k then reroot and then change the build prop to CA/TLS and finally hardreset via stock recovery. Anybody else have this issue?
UPDATE... looks like as long as i dont try to make a call the option to switch it back to auto is still there. One a call is attempted and fails the option to set to auto disappears.
fastwanabe said:
Hi, guys I recently ran into an issue with the build prop modification in regards to network selection. If I enable the network selection as pointed out in one of the other threads and select LTE /CDMA my phone will lock on LTE however no phone calls can be made out or recieved. I had to reflash to 10k then reroot and then change the build prop to CA/TLS and finally hardreset via stock recovery. Anybody else have this issue?
Click to expand...
Click to collapse
Most carriers Phone calls and Texts dont go through LTE...... If your setting it to LTE only thats why.
hyelton said:
Most carriers Phone calls and Texts dont go through LTE...... If your setting it to LTE only thats why.
Click to expand...
Click to collapse
I understand but after it's been on LTE for a while it doesn't give you the option to switch back.
fastwanabe said:
Hi, guys I recently ran into an issue with the build prop modification in regards to network selection. If I enable the network selection as pointed out in one of the other threads and select LTE /CDMA my phone will lock on LTE however no phone calls can be made out or recieved. I had to reflash to 10k then reroot and then change the build prop to CA/TLS and finally hardreset via stock recovery. Anybody else have this issue?
Click to expand...
Click to collapse
fastwanabe said:
I understand but after it's been on LTE for a while it doesn't give you the option to switch back.
Click to expand...
Click to collapse
Depending on what rom your using under mobile networks there is network selections with
LTE/WCDMA/GSM
GSM Only
WCDMA Only
and LTE only
hyelton said:
Depending on what rom your using under mobile networks there is network selections with
LTE/WCDMA/GSM
GSM Only
WCDMA Only
and LTE only
Click to expand...
Click to collapse
Right, thats what normally the options are however after about 5 min after selecting LTE/CDMA the only options that appear were.
LTE/CDMA
CDMA
thats it.
fastwanabe said:
Right, thats what normally the options are however after about 5 min after selecting LTE/CDMA the only options that appear were.
LTE/CDMA
CDMA
thats it.
Click to expand...
Click to collapse
How are you changing it? Changing it via Build.Prop? Then there is your problem, JUST change it using the setting under mobile networks..
hyelton said:
Most carriers Phone calls and Texts dont go through LTE...... If your setting it to LTE only thats why.
Click to expand...
Click to collapse
hyelton said:
How are you changing it? Changing it via Build.Prop? Then there is your problem, JUST change it using the setting under mobile networks..
Click to expand...
Click to collapse
I'm changing it under mobile networks.
Stop changing it to lte/cdma and you're phone will no longer mess up. Leave it on gsm/wcdma/lte auto. You're phone will switch when the appropriate network is available!!!
Sent from my LG-E980 using XDA Premium 4 mobile app
fastwanabe said:
Hi, guys I recently ran into an issue with the build prop modification in regards to network selection. If I enable the network selection as pointed out in one of the other threads and select LTE /CDMA my phone will lock on LTE however no phone calls can be made out or recieved. I had to reflash to 10k then reroot and then change the build prop to CA/TLS and finally hardreset via stock recovery. Anybody else have this issue?
Click to expand...
Click to collapse
Simple fix. Just select airplane mode for a few and then toggle it off and you'll see your network options come back once data roaming turns off and your carrier logo appears. I typically run lte/CDMA to get consistent lte speed bit when a callsade I have the same issue as you. But I just gave your the fix so your good
Sent from my LG-E980 using Tapatalk 2
Jammol said:
Stop changing it to lte/cdma and you're phone will no longer mess up. Leave it on gsm/wcdma/lte auto. You're phone will switch when the appropriate network is available!!!
Sent from my LG-E980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks a lot captain obvious, the point of the thread wasn't to "not switch it" dude, it's finding a work around and make everybody aware of what happens.
fastwanabe said:
Thanks a lot captain obvious, the point of the thread wasn't to "not switch it" dude, it's finding a work around and make everybody aware of what happens.
Click to expand...
Click to collapse
It would happen on any phone!!!!!

Flashed darthstalker and now I can't get LTE signal.

This seems to be the only issue. Do I need to change some settings somewhere after flashing or should I just try to reflash the whole thing.
ramethorne said:
This seems to be the only issue. Do I need to change some settings somewhere after flashing or should I just try to reflash the whole thing.
Click to expand...
Click to collapse
Look in your APN settings.
Settings, more, mobile networks, access point names, make sure apn is fast.t-mobile.com
Sent from my SM-N900T using Tapatalk 4
AdmiralCF420 said:
Look in your APN settings.
Click to expand...
Click to collapse
T-mobile lte is selected and the settings are filled out. What could have caused the lte to stop working? It doesn't seem to matter what I do.
When I flashed it, network mode was set to 4G. Changed it back to LTE and got back my LTE.
Settings>More>Mobile Networks>Network Mode
Sent from my SM-N900T using Tapatalk now Free
Ok I am back on the stock rom and I am still stuck on the edge network and my apn settings are greyed out but look ok. The network mode is on lte/wcdma/gsm and the status bar says 4g but I have no signal bars and extremely slow spped unless I am on wifi. I can get calls and texts though. Anything else important to solve this?
Sorry for double post but my imei number is 15 digits long if that matters.
LTE GONE
Bump... Having the same problem! Tried everything with respect to network mode, APNs, *#2263# and flashing different roms.
Although it worked at first, LTE disappeared on me out of the blue. Any ideas?

[Q] ATT signal troubles on H815 US

I purchased my phone (h815 US model) online from swappa and I love the feel and look of the phone, Love the camera, BUT my phone wants to stay on hspa all the time. Where i had 3 or 4 bars on my s5 active I get HSPA unless I go in to settings and sellect ATT:LTE from network operators which only last until my phone goes to sleep then im back on hspa. Anyone else experiencing this? Or anything i should try? Thanks in advance for any help!
Bumpers just in case someone who knows didn't see it. Sorry won't bump it again!
Craleb said:
Bumpers just in case someone who knows didn't see it. Sorry won't bump it again!
Click to expand...
Click to collapse
Maybe with hidden menu access via dialer,you can permanently enabled it...I don't know the actual code that might work for your device..but you can find it through here..In general threads maybe
I had to set the proper APNs on my H815, additionally I had to tell it to use GSM/WCDMA/LTE Auto under Network Mode in the Mobile Networks settings.
AT&T APN settings
www.att.com/esupport/article.jsp?sid=KB424489&cv=820
Pic of Mobile Networks
http://imgur.com/UtrfVUZ
After that, it's been using LTE where available.
Daptonic said:
I had to set the proper APNs on my H815, additionally I had to tell it to use GSM/WCDMA/LTE Auto under Network Mode in the Mobile Networks settings.
AT&T APN settings
www.att.com/esupport/article.jsp?sid=KB424489&cv=820
Pic of Mobile Networks
http://imgur.com/UtrfVUZ
After that, it's been using LTE where available.
Click to expand...
Click to collapse
Thank you @Daptonic . I was attempting to use the "ATT nxtgenphone" APN because it works better on ATT devices but I guess the ATT Phone APN is needed for non ATT devices. Rebooted phone and it went straight to 4g. Thanks for responding.
Edit: dammit, it went back to hspa again......

Categories

Resources