Related
I cannot wait for the official galaxy S3 wireless charging kit to come out.
I got inspired by the Galaxy mod that was done by using parts from a Palm Touchstone cover.
ww.qianqin.de/2011/09/28/high-waf-inductive-charging-mod/
I am pretty sure, that I don't need to do an intrusive operation as the one in the link - I believe that Samsung made pins ready for it under the cover.
Does anyone know what the two 'pins' that are exposed to the left of the battery are for?
Thanks!
There are countless threads regarding the "pins", wireless charging kits, and that mod.
I have a touchstone. And a back, and would like to see if anyone has applied this to the S3 and made it work
Sent from my GT-I9300 using xda premium
I have a feeling the wireless charging module will interact somehow with the two pins next to the battery. I was planning on attempting this mod using these pins but without a multimeter i am unable to tell whether these pins can be used and which way round to wire them up. If anyone can assist i would be grateful.
BungeBash said:
There are countless threads regarding the "pins", wireless charging kits, and that mod.
Click to expand...
Click to collapse
Yes. Countless threads about the mod for the Galaxy S, but I haven't been able to find anything about pins on the Galaxy SIII.
- Maybe I'm just bad at searching, believe me I have tried!
I also would love to know if and how someone gets their sgs3 working with the palm touchstone! Hope it is not too difficult!
pcyyijb said:
I have a feeling the wireless charging module will interact somehow with the two pins next to the battery. I was planning on attempting this mod using these pins but without a multimeter i am unable to tell whether these pins can be used and which way round to wire them up. If anyone can assist i would be grateful.
Click to expand...
Click to collapse
I have finally managed to find a page that claimt that the two pins next to the battery indeed are for wireless charging.
ww.trustedreviews.com/samsung-galaxy-s3_Mobile-Phone_review
Only problem is, I don't know Trusted Reviews - so I don't know how 'Trusted' they are?
All I need now is to find out which pin is 0V and which is +5V. (I'm pretty sure that the current is the same as the Palm cover provides.
Every accessories are always made for on pin, hdmi,wireless kit etc. Always Samsung market tactics.
I wish you'll do it.
Upper pin is plus, lower minus - and it has also be done!
http://www.android-hilfe.de/zubehoe...-samsung-galaxy-s3-ohne-kabel-aufladen-6.html
I'm also trying to do that, hopefully it works
N23 said:
Upper pin is plus, lower minus - and it has also be done!
http://www.android-hilfe.de/zubehoe...-samsung-galaxy-s3-ohne-kabel-aufladen-6.html
I'm also trying to do that, hopefully it works
Click to expand...
Click to collapse
Yes it works, it will be a little slower, im only seeing 450mah going in as opposed to about 1000mah
But that doesnt matter in the slightest as i mostly charge overnight
that is great news! That does not look too difficult and it looks as NFC is not touched. Just the translation is difficult and not knowing what samsung wireless charging is about.
I also wonder how snug the fit is after adding the magnets from the touchstone back cover?
I will post details soon when i am back home
Sent from my GT-I9300 using xda premium
I'm still waiting for my touchstone and palm battery cover to arrive...
I found this! He looks like he did a great job. I am just curious if he had to solder anything to the phone?
http://www.youtube.com/watch?v=uAqP3T_Mbzg
yes he did, i'm gonna try it with just tape - his solder blobs seems to be huge and because of the the cover makes this bulge... maybe then it will fit perfectly
the samsung wireless charger looks nice but i like the idea with the magnets of the touchstone!
please post pictures and a possible video. This is so interesting!
i'll do as soon i get the touchstone kit and have some spare time to do this (hopefully on sunday...)
what happens when you place an induction charging compatible device on an induction cooking range? Will it charge the battery, or will it overload the circuitry and destroy the phone\battery?
I wonder what happens when you plug in the phone with usb while it's inductively charging.
Zabalba said:
I wonder what happens when you plug in the phone with usb while it's inductively charging.
Click to expand...
Click to collapse
I would think they would work together or one would be disabled by the other. Don't think they would allow both if it could cause damage.
Sent from my SPH-D710 using Tapatalk 2
Which is one feature i really would have liked.. but popping the back open, I see the two leads for NFC, but the two leads near the right side of the battery for inductive charging on the international version is not on the Sprint version.. sad panda face
-- UPDATE -- Successful mod
I had to order a Sprint specific backplate from ebay
So I got the Nexus Wireless Qi Charging Orb.. and I drilled two small holes in the spare Sprint backplate I had.. I then proceeded to use some copper foil, folded it up a few times, and placed them in the hole with the sticky part on the housing. I then made sure the bottom of the folded copper was down enough to make contact with the contacts on the motherboard. Closed it up and then placed the receiver in the holes with the copper foil. Placed on the Qi charger and boom.. Wireless charging..
I did it this way so I can replace the middle housing and it won't look like I modded the phone if I need to take it in for repair.. Also, I can charge it with the Seidio Surface case on.
If the pics don't show up you can go to http://imgur.com/a/CuEE5
Titanium Housing - http://www.ebay.com/itm/OEM-Housing...135?pt=LH_DefaultDomain_0&hash=item2327224ab7
White Housing - http://www.ebay.com/itm/OEM-Housing...686?pt=LH_DefaultDomain_0&hash=item2579c11fd6
Copper Tape I used - http://www.amazon.com/gp/product/B000UZ8SJK/ref=wms_ohs_product?ie=UTF8&psc=1
What was the inductive charging supposed to do?
Sent from my SPH-L900 using xda premium
mrush said:
What was the inductive charging supposed to do?
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
similar to wireless charging, but you lay the phone on a Charing Mat, and without the cords, the phone starts to charge .
Though OP, you're saying that it can't be easily fixed, with a Replacement of the cover? is that it isn't literaly on the phone itself?
Kikoshi said:
similar to wireless charging, but you lay the phone on a Charing Mat, and without the cords, the phone starts to charge .
Though OP, you're saying that it can't be easily fixed, with a Replacement of the cover? is that it isn't literaly on the phone itself?
Click to expand...
Click to collapse
If I understand correctly it's on the phone itself.
Kikoshi said:
similar to wireless charging, but you lay the phone on a Charing Mat, and without the cords, the phone starts to charge .
Though OP, you're saying that it can't be easily fixed, with a Replacement of the cover? is that it isn't literaly on the phone itself?
Click to expand...
Click to collapse
If you see in this picture http://dl.xda-developers.com/attach.../1/6/5/4/0/uploadfromtaptalk1350732279172.jpg you can see two pins on the right of the battery. Those were on the S3 for wireless charging. They are not on the Sprint Note 2
jyan_osu said:
If you see in this picture http://dl.xda-developers.com/attach.../1/6/5/4/0/uploadfromtaptalk1350732279172.jpg you can see two pins on the right of the battery. Those were on the S3 for wireless charging. They are not on the Sprint Note 2
Click to expand...
Click to collapse
Can't see the image :/, wouldn't a replacement cover, add this utility just like the NFC?
Kikoshi said:
Can't see the image :/, wouldn't a replacement cover, add this utility just like the NFC?
Click to expand...
Click to collapse
Think you need the contacts.. or maybe a third party can come up with a solution
Are you saying that only Sprint GN2 version missing it? What about other version, eg international, T-mo and etc.
I dont know about the other versions. I only have the sprint one
Sent from my SPH-L900 using Tapatalk 2
jyan_osu said:
I dont know about the other versions. I only have the sprint one
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
I have the T-mobile and am about to modify mine for wireless charging just like my Verizon S3 is... It has already been confirmed working so I know that the T-mobile version has the same pins as the International does (which is GREAT) but I think it may require some stronger magnets this time around. LOL
shojus said:
I have the T-mobile and am about to modify mine for wireless charging just like my Verizon S3 is... It has already been confirmed working so I know that the T-mobile version has the same pins as the International does (which is GREAT) but I think it may require some stronger magnets this time around. LOL
Click to expand...
Click to collapse
wow.. so sprint screwed us up all over again with the their own phone mods?... after my 2 years are up.. i think i might take leave.. wtf.
need pics
Kikoshi said:
wow.. so sprint screwed us up all over again with the their own phone mods?... after my 2 years are up.. i think i might take leave.. wtf.
Click to expand...
Click to collapse
I think this can still be done I have to ask some folks I think you can run a connecting line to the battery connections through using copper tape, if this is so we just need someone with electronic know how but google copper tape you will see its thin conductive tape that can lead anywhere Im wondering if this mod can be done that way..
Ps can someone take detailed pics of the back of the phone with cover off, with the battery in and out thanks Im trying to think of a solution
randy2 said:
I think this can still be done I have to ask some folks I think you can run a connecting line to the battery connections through using copper tape, if this is so we just need someone with electronic know how but google copper tape you will see its thin conductive tape that can lead anywhere Im wondering if this mod can be done that way..
Ps can someone take detailed pics of the back of the phone with cover off, with the battery in and out thanks Im trying to think of a solution
Click to expand...
Click to collapse
Here are pics
They are there they moved them up see the connection pos and neg are there just in different places top right next to speaker or is that nfc only someone let me know I don't have the device yet if so maybe you can run two leads from the battery connection pins on the phone but that's just a theory I don't know if the connection will charge your the battery once I get my phone I will attempt to mod with battery connection pin hijack to copper tape to induction coil.
Sent from my SPH-L710 using xda app-developers app
randy2 said:
They are there they moved them up see the connection pos and neg are there just in different places top right next to speaker or is that nfc only someone let me know I don't have the device yet
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
That is NFC. .. on the International and Tmobile ones, they have those and two more to the right of the battery.. if you look on the back cover inside there are two pins for the NFC that connects to the back of the phone in that location.
jyan_osu said:
That is NFC. .. on the International and Tmobile ones, they have those and two more to the right of the battery.. if you look on the back cover inside there are two pins for the NFC that connects to the back of the phone in that location.
View attachment 1432476
Click to expand...
Click to collapse
I'll try the battery connection pins hijack then but I won't be able to until best buy gets the device in so where there's a will there's a way
Sent from my SPH-L710 using xda app-developers app
so, crippled world phone, crippled charging and no SVDO. Anything else to add to the list?
dbpaddler said:
so, crippled world phone, crippled charging and no SVDO. Anything else to add to the list?
Click to expand...
Click to collapse
I dont know but sprint really *ucked this model up if they would have left it alone like tmobile we would have been fine Im looking for a solution to the wireless charging but i dont know if its going to be possible all because sprint wants to be different and difficult. Ive been with sprint for 15 years but my patience is wearing thin.
Im still going to attempt a wireless fix though
whats this need yall help
Can someone help me, I dont have the phone yet so im trying everything in theory, to get wireless charging going. so I have questions!
What is this box
Whats the box for it doesnt look like nfc or a speaker or a microphone so Im hoping its tied to some sort of wireless charging, maybe a cover with the charging pins underneath (wishful thinking)
Personally I think wireless charging is overrated. There's a cable plugged in somewhere to get the pad going. And you can't use the phone while it's charging. Well, inconveniently you can. And it charges quicker via a cable.
Hey guys, don't know if people have done this already, but I just got a T-mobile S4 for testing this weekend and I wanted to find out if the wireless charging port was enabled since I've done the touchstone wireless charging mod on my S3 and note 2.
It was especially a PIA on the note 2 since T-mobile, in all of its corporate and engineering wisdom, decided to disable the feature for the Note 2, even though it was enabled for the S3. So for those of you who don't like to dissemble your new phone and solder on a tiny PCB, you'll be happy to know that I confirmed that wireless charging ports on the S4 is indeed enabled.
I took a pack of 4x AAA battery assembly, which provides ~4.7v of DC power, and connected to the charging port in the back. The small pair on the left is the charging port, the pair on the right is supposedly NFC, even though the NFC antenna is located on the battery for S4.
As you can see from the pics, the "the phone is now charging wirelessly" notification pops up when the circuit is live, which is pretty annoying IMO and can't be disabled (that's why we have custom roms right?)
I haven't gotten a chance to install the actual touchstone wireless charging receivers on the back yet, as this is a test unit that I have to return, but I don't imagine this to be too different than on the S3. There will be a slight bulge, but it'll be worth it.
How do I put this mod in use
Sent from my SGH-M919 using xda app-developers app
Tried it with my Qi charger from Energizer and it's doing absolutely nothing.
RonDigital828 said:
How do I put this mod in use
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Just follow the instructions from this thread (it's for an S3). The design for S3 is pretty similar, so it should work. Remember the positive pin is on the left, negative (ground) is on the right.
Also note that the touchstone mechanism is not Qi compatible, so it wont work with the newer charging mats for Nokia or HTC.
And always remember to perform these mods at your own risk.
mattlgroff said:
Tried it with my Qi charger from Energizer and it's doing absolutely nothing.
Click to expand...
Click to collapse
Did you install any receiver on the S4?
I didn't mean to confuse anyone, I only confirmed that it is POSSIBLE to perform the mod. I used a 4.7v DC power supply to test if the wireless charging pins on the back are live, which wasn't the case for T-mobile note 2 so I had to check to make sure.
If you already have a Qi charger, you can get one of these receivers and connect it to your phone, then you'll be able to charger with your mat
http://www.ebay.com/itm/qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item51abef6de9
But I would argue that the touchstone method is superior to qi if you plan on using it in a car, as the magnets keep the phone in place is it's really convenient to connect/disconnect when you're driving.
ncc1701k said:
Did you install any receiver on the S4?
I didn't mean to confuse anyone, I only confirmed that it is POSSIBLE to perform the mod. I used a 4.7v DC power supply to test if the wireless charging pins on the back are live, which wasn't the case for T-mobile note 2 so I had to check to make sure.
If you already have a Qi charger, you can get one of these receivers and connect it to your phone, then you'll be able to charger with your mat
http://www.ebay.com/itm/qi-Wireless...l_Phone_PDA_Chargers&var=&hash=item51abef6de9
But I would argue that the touchstone method is superior to qi if you plan on using it in a car, as the magnets keep the phone in place is it's really convenient to connect/disconnect when you're driving.
Click to expand...
Click to collapse
I was under the impression the S4 had wireless charging built in, whoops.
Me too!!!
That was a disappointment!!! :banghead:
DEVICES:
NEXUS 7 32GB STOCK
(NO ROOT)
T-MOBIL LG G2X (LG-P999)
STOCK (ROOTED)
Sent from my LG-P999 using xda premium
mattlgroff said:
I was under the impression the S4 had wireless charging built in, whoops.
Click to expand...
Click to collapse
Samsung will be officially supporting wireless charging for the S4 through accessories. The ad for the pad and back wireless charging cover is already listed on the promo S4 accessories page. http://www.samsung.com/global/microsite/galaxys4/
Though there seems to be no price or date yet.
Of course there will be 3rd party wireless charging solutions as well.
ive got a palm touchstone but what receiver do i need to buy to have my GS4 work with it ?
also;
can anyone confirm or deny wether or not the palm touchstone + receiver will trickle charge the GS4 after it is fully charged ? (or does it completely cease charging until the phone is physically picked up and replaced ?)
wavrunrx said:
ive got a palm touchstone but what receiver do i need to buy to have my GS4 work with it ?
also;
can anyone confirm or deny wether or not the palm touchstone + receiver will trickle charge the GS4 after it is fully charged ? (or does it completely cease charging until the phone is physically picked up and replaced ?)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1877191
the link above is the thread with a tutorial on how to do the mod for S3, should apply to S4 as well.
I can confirm that it trickle charge S3 and Note 2 ( if I understood you correctly, it will keep the phone charged as long as it's on the touchstone base), shouldnt be any different for S4.
ncc1701k said:
http://forum.xda-developers.com/showthread.php?t=1877191
the link above is the thread with a tutorial on how to do the mod for S3, should apply to S4 as well.
I can confirm that it trickle charge S3 and Note 2 ( if I understood you correctly, it will keep the phone charged as long as it's on the touchstone base), shouldnt be any different for S4.
Click to expand...
Click to collapse
ok cool;
but.
i did the mod for the s3....... twice.
it didnt work out; so id rather just buy a pre-made module; do you know what one i can use fro the s4 ?
wavrunrx said:
ok cool;
but.
i did the mod for the s3....... twice.
it didnt work out; so id rather just buy a pre-made module; do you know what one i can use fro the s4 ?
Click to expand...
Click to collapse
I havent tried the premade modules yet, but the do look quite a bit thinner
try this
http://www.ebay.com/itm/Samsung-Gal...S_Cell_Phone_PDA_Chargers&hash=item232a7f9413
yeah it's not the easier mod to do and def took me quite a few tries too
Took the Qi wireless receiver pad from my Galaxy S3, had to slightly tear it apart to reverse the little gold inserts that create the contact points for the wireless battery charging and now have a fully functioning wireless charging Galaxy S4 !
Saved myself quite a bit of money doing that.
alexnader said:
Took the Qi wireless receiver pad from my Galaxy S3, had to slightly tear it apart to reverse the little gold inserts that create the contact points for the wireless battery charging and now have a fully functioning wireless charging Galaxy S4 !
Saved myself quite a bit of money doing that.
Click to expand...
Click to collapse
Can you post some pictures.
Thanks in advanced.
Sent from my SGH-M919 using xda app-developers app
it is not easy for nomal people to change the phone like this. if there's no official support,
most of people will not care that.
although , i like wireless charging very much
michaeljimmy said:
it is not easy for nomal people to change the phone like this. if there's no official support,
most of people will not care that.
although , i like wireless charging very much
Click to expand...
Click to collapse
It seriously only took 5~10 minutes once I'd figured out which way to put what.
I have the photos set up and just need to put notes on them explaining what I did.
Will post them when I get home tonight (12am CT)
Ummmm, from everything I read the pins you have it hooked up to are NOT the ones for inductive charging, the gold ones on the right are......
I could be mistaken however. I remember the s3 used those pins, but I've read in a couple places that the ones made specifically for inductive charging are the ones on the right above the battery.
TeknoGodz said:
Ummmm, from everything I read the pins you have it hooked up to are NOT the ones for inductive charging, the gold ones on the right are......
I could be mistaken however. I remember the s3 used those pins, but I've read in a couple places that the ones made specifically for inductive charging are the ones on the right above the battery.
Click to expand...
Click to collapse
What ARE all the other pins back there for? I figured one set (had no idea which one) was for inductive charging, but couldn't figure a reason for the others..
coyttl said:
What ARE all the other pins back there for? I figured one set (had no idea which one) was for inductive charging, but couldn't figure a reason for the others..
Click to expand...
Click to collapse
the smaller set is wireless charging, the larger set is presumably for additional NFC antenna (although I measured no resistance in the circuit with my voltmeter), as the back cover seemed to have a carved out area for a NFC like the Note 2 did.
Although the S4 battery says "NFC" on it, which seems like samsung made a last minute decision to put NFC on the battery instead of the back cover... oh samsung ¯\_(ツ)_/¯
ncc1701k said:
the smaller set is wireless charging, the larger set is presumably for additional NFC antenna (although I measured no resistance in the circuit with my voltmeter), as the back cover seemed to have a carved out area for a NFC like the Note 2 did.
Although the S4 battery says "NFC" on it, which seems like samsung made a last minute decision to put NFC on the battery instead of the back cover... oh samsung ¯\_(ツ)_/¯
Click to expand...
Click to collapse
Nope, the NFC is in fact in the battery, the same way Samsung has been doing it for years now. They made no change.
Oh false information from people that don't know what they're talking about ¯\_(ツ)_/¯
I have been reading some very interesting posts about adding wireless charging capabilities to a Samsung Galaxy Nexus. Although it seems like every mod requires a touchstone coil, which also requires a larger back cover. Browsing ebay I ran across a "patch" of sorts that goes between the case and the battery to add the inductive charging. I was wondering before I buy it and rip apart my beloved phone. Could I just solder the "patch" to the pogo pins on the side of the phone and would it charge? Or am I missing a component? Thanks in advance for any help!
On Ebay it is called "Qi Wireless Charger Charging Pad + Receiver Kit for Samsung Galaxy S4 S IV i9500"
Also this is my first post, so any comments would be helpful too!
Isn't it for the s4? So I assume it doesn't work on the Galaxy Nexus..
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
Isn't it for the s4? So I assume it doesn't work on the Galaxy Nexus..
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
That's what mods are all about, people have successfully mod the palm touchstone coil into their phone and it works flawlessly.
In theory this would work, but how OP are going to connect it to the pogo pins, that's another problem.
Beamed from my Grouper
Oho Thank you. it very good
Well I was thinking that if you take the phone apart there is a spot where the pogo plugs connect to the circuit board. I thought I could just solder a thin gage wire to the leads, but does that patch have the correct circuits to supply 5v with the right amount of amps?
Sent from my Galaxy Nexus using xda app-developers app
mjz2207 said:
Well I was thinking that if you take the phone apart there is a spot where the pogo plugs connect to the circuit board. I thought I could just solder a thin gage wire to the leads, but does that patch have the correct circuits to supply 5v with the right amount of amps?
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Check the specs of the induction charger.
Anyway for the touchstone mod, others used a copper tape instead of a wire.
Beamed from my Maguro.
I have a s3 a couple of the s3 qi cards. I have my gnex as a backup and did the mod myself. If you peal the top label off the card around the pins you'll be able to desolder the s3 connector and solder a couple wires. I used a couple fine wires I removed from a old ide cable. I then used a dremel tool to cut a small rectangle under the battery door and behind the pogo pins to connect the wires. I used a very small cut off wheel, took my time, and cut shallow and never took the phone apart. The pins are easy to solder to and much safer. This did disable my pogo pins, but I have no dock so I don't care. I have the Samsung OEM 2000mah extended battery and back cover. This leaves me a small gap to lay my wires without any battery door bulge. My ditztronic case still fits perfect and the wireless charging works great. Its worth noting that the qi pad will provide around 600ma, which is fine since the dock pins charge in USB mode anyway.
BTW, while I think the safest and easiest way to get to the phone's circuitry is to cut that small hole, you are putting a dremel to your phone so I am in no way responsible if you somehow kill your phone.
Sent from my Nexus 7 using Tapatalk 2
I got wireless charging on my gnexus
I struggled with this issue for a VERY LONG TIME and I got it down now. I made a video on how I get wireless charging on my G.Nexus easily. I even posted the links to the stuff in the description. The method is universal. I can't post links to outside sources so heres how you get to my video.
In Google search type in : #mynameisterrance. The find my profile on G+ (Terrance Johnson) and go to my Youtube videos.
mynameisterrance said:
I struggled with this issue for a VERY LONG TIME and I got it down now. I made a video on how I get wireless charging on my G.Nexus easily. I even posted the links to the stuff in the description. The method is universal. I can't post links to outside sources so heres how you get to my video.
In Google search type in : #mynameisterrance. The find my profile on G+ (Terrance Johnson) and go to my Youtube videos.
Click to expand...
Click to collapse
Sounds good, let me check and give and try.
I just got an S3, and was excited about the ability to use wireless charging. While looking for QI gear on eBay, I ironically stumbled across an item that will add that very same feature on my old SII, without any permanent hardware mod needed.
The item in question is this: http://www.ebay.com/itm/200963522572?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
It's basically a QI charging inlay thing that has a very tiny microUSB connector, allowing you to connect it to essentially anything that charges via microUSB. I bought one just to try it out, and sure enough, it works like a charm with my old S II. I have a cheap (but great) TPU case on my S II, and the QI inlay fit absolutely perfectly between the case and the phone's actual back cover.
I used the SII for more than a year and a half, and I frankly hope that this was just invented a few weeks ago, as I hate to think that wireless charging for my S II was $16 away all that time >.<
Hey, *thanks* so much for this, it is just about exactly what i was looking for (and not able to track down on the net). Much appreciated and can't wait to try it out on my SGS2!
Where can I get the charging pad to lay it on? It's not in the link
0ftal said:
Where can I get the charging pad to lay it on? It's not in the link
Click to expand...
Click to collapse
QI is a standard. Throw a rock and you will hit a compatible charger : p
Thanks, this was very useful info.
Will it work with PowerMat charging pad or I need to buy new one?
Sent from my GT-I9100 using XDA Premium 4 mobile app
caliber2001 said:
Will it work with PowerMat charging pad or I need to buy new one?
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's for the QI standard, so if PowerMat is QI, it will work. If not, it wont
Cant find qi logo, so probably i gonna need new mat
Sent from my GT-I9100 using XDA Premium 4 mobile app
brilliant. I've been searching for this for ages. Thanks
that is an interesting stuff.
No more cable.
Enviado do meu GT-I9100 através de Tapatalk
Just one question: can u still use the micro usb or do u have to remove it when you want to plug an usb cable in? For example for transferring stuff?
0ftal said:
Where can I get the charging pad to lay it on? It's not in the link
Click to expand...
Click to collapse
Charching pad is for s4 i think but from zens there is one with cover for s3 i owned it both ???
Sent from my GT-I9505G using XDA Premium 4 mobile app
great stuff, but what will i do if i need to charge it by cable?
With "Android Tuner Free" you can see the incoming mAh when charging (at battery stats).
With standard wallcharger from samsung I get ~640mAh
Does anybody got the incoming mAh stats about wireless charging?
Anyway, I think cable is better because you can move and use your phone.
GreekBlood said:
With "Android Tuner Free" you can see the incoming mAh when charging (at battery stats).
With standard wallcharger from samsung I get ~640mAh
Does anybody got the incoming mAh stats about wireless charging?
Anyway, I think cable is better because you can move and use your phone.
Click to expand...
Click to collapse
the wireless charging is ~600mAh