Develop Bugs

WiFi Tethering Issue

I rooted my Droid Incredible today using Unrevoked's one-click rooting process. The whole purpose of doing so was so I could use the wireless tethering feature. However, now that I have successfully rooted the device, I cannot get ANY application to work. I have used numerous programs found within the Android Market (Barnacle, etc etc) and have also tried the tether application that comes pre-installed with Android 2.2.
When I activate the wireless tether, the wireless network does not appear so other devices can connect to it.
I have searched the forums inside and out. I have tried the ##778 method suggested in this forum: http://forum.xda-developers.com/showthread.php?t=752687 and it did not fix my problem.
Any and ALL help is deeply appreciated! Thanks in advance for your time.

drumcrazy said:
I rooted my Droid Incredible today using Unrevoked's one-click rooting process. The whole purpose of doing so was so I could use the wireless tethering feature. However, now that I have successfully rooted the device, I cannot get ANY application to work. I have used numerous programs found within the Android Market (Barnacle, etc etc) and have also tried the tether application that comes pre-installed with Android 2.2.
When I activate the wireless tether, the wireless network does not appear so other devices can connect to it.
I have searched the forums inside and out. I have tried the ##778 method suggested in this forum: http://forum.xda-developers.com/showthread.php?t=752687 and it did not fix my problem.
Any and ALL help is deeply appreciated! Thanks in advance for your time.
Click to expand...
Click to collapse
I checked that thread you mentioned and it didn't seem very thorough. Here's something that I wrote on Android Forums that works for non-rooted Incredibles:
This works great on my Incredible. No rooting required, but you must have the 2.2 update which enables the 3G Mobile Hotspot on the device.
1. Select "Phone"
2. Dial "##778"
3. Select "Edit Mode" on pop-up dialog box
4. Enter "000000" for Please Enter Password (unless you manually changed your password to something else)
5. Select "Security"
6. Select "S.IP DUN User Name"
7. Delete the "dun." part of the number (ie: it should read as: [yourmobilenumber]@vzw3g.com)
8. Select "OK"
9. Press the "BACK" button
10. Select "M.IP Default Profile"
11. Select "DUN NAI"
12. Delete the ".dun" part of the number (ie: it should read as: [yourmobilenumber]@vzw3g.com)
13. Select "OK"
14. Press the "MENU" button
15. Select "Commit Modifications"
16. The phone will reset
17. Once booted, go into "All Programs", select the "3G Mobile Hotspot", Adjust your "Router Name" and "Password" (if you desire, but recommmended), and change the security to WPA(TKIP) (this is the only setting I've tried so far-other posts said the WPA2 is buggy)
18. Select "3G Mobile Hotspot - Press to turn on" (It will prompt you that you need the Verizon Mobile Hotspot Feature- just hit "Do not remind me again" and "OK") (Also, I am using Windows 7x64, and the wifi picked up the signal right away, but it took a moment to identify-but it connected to the internet cleanly and the connection is fast).
It can't hurt.

paulmz said:
I checked that thread you mentioned and it didn't seem very thorough. Here's something that I wrote on Android Forums that works for non-rooted Incredibles:
This works great on my Incredible. No rooting required, but you must have the 2.2 update which enables the 3G Mobile Hotspot on the device.
1. Select "Phone"
2. Dial "##778"
3. Select "Edit Mode" on pop-up dialog box
4. Enter "000000" for Please Enter Password (unless you manually changed your password to something else)
5. Select "Security"
6. Select "S.IP DUN User Name"
7. Delete the "dun." part of the number (ie: it should read as: [yourmobilenumber]@vzw3g.com)
8. Select "OK"
9. Press the "BACK" button
10. Select "M.IP Default Profile"
11. Select "DUN NAI"
12. Delete the ".dun" part of the number (ie: it should read as: [yourmobilenumber]@vzw3g.com)
13. Select "OK"
14. Press the "MENU" button
15. Select "Commit Modifications"
16. The phone will reset
17. Once booted, go into "All Programs", select the "3G Mobile Hotspot", Adjust your "Router Name" and "Password" (if you desire, but recommmended), and change the security to WPA(TKIP) (this is the only setting I've tried so far-other posts said the WPA2 is buggy)
18. Select "3G Mobile Hotspot - Press to turn on" (It will prompt you that you need the Verizon Mobile Hotspot Feature- just hit "Do not remind me again" and "OK") (Also, I am using Windows 7x64, and the wifi picked up the signal right away, but it took a moment to identify-but it connected to the internet cleanly and the connection is fast).
It can't hurt.
Click to expand...
Click to collapse
doesnt work for me, sorry

don't use the verizon wifi hotspot application. you need to install the corresponding kernel (Hydra stock undervolt is a good one for Sense) and Wireless Tether.apk to get it to work properly.

Knightslugger said:
don't use the verizon wifi hotspot application. you need to install the corresponding kernel (Hydra stock undervolt is a good one for Sense) and Wireless Tether.apk to get it to work properly.
Click to expand...
Click to collapse
I ran unrevoked, rooted my Incredible, and installed Wifi Tether and it has been working flawlessly for me. I didn't do anything with a custom kernel.
What I had to do to get the app to work, is I had to go grab an older version of wifi tether from the developers site and install the apk manually. After that, the newer market version started to work properly.

is ##778 a sense only thing? when I call that or ##778+ on miui I just get a call cannot be completed message

bucwylde23 said:
I ran unrevoked, rooted my Incredible, and installed Wifi Tether and it has been working flawlessly for me. I didn't do anything with a custom kernel.
What I had to do to get the app to work, is I had to go grab an older version of wifi tether from the developers site and install the apk manually. After that, the newer market version started to work properly.
Click to expand...
Click to collapse
check your kernel version. is it the stock HTC kernel?

Knightslugger said:
check your kernel version. is it the stock HTC kernel?
Click to expand...
Click to collapse
Yep,
2.6.32.17-g9a2fc16
[email protected]#1
All I did was run unrevoked and then get the wifi tether app.

Same here
Ran unrevoked then wireless tether-works great
Also did #778 - works fine too (only about 500k on either one)

huh, must have fixed the issue with the kernel since the last update. i remember that was one of the first things i did when i rooted was get the wireless tether working and i had to download Hydr kernel to get it going.

bucwylde23 said:
I ran unrevoked, rooted my Incredible, and installed Wifi Tether and it has been working flawlessly for me. I didn't do anything with a custom kernel.
What I had to do to get the app to work, is I had to go grab an older version of wifi tether from the developers site and install the apk manually. After that, the newer market version started to work properly.
Click to expand...
Click to collapse
i will try this because Wifi tether works flawlessly on my Eris

bucwylde23 said:
What I had to do to get the app to work, is I had to go grab an older version of wifi tether from the developers site and install the apk manually. After that, the newer market version started to work properly.
Click to expand...
Click to collapse
That worked perfectly! Thank you!
Thanks to everyone for suggestions

FIXED: Can't send MMS? Sprint / Boost / Virgin Mobile APN Settings Problem!

I think there's something wrong w/ my APN settings. I can send/receive SMS, voice, and data. I can only receive MMS. The only way I've been able to send MMS out is by installing Go SMS Pro and manually putting in APN in the app.
My stock messaging or Handcent can't send out MMS, so I'm thinking perhaps my APN got messed up. How can I verify/correct this?
See fix below! :thumbup:

Please DO NOT QUOTE this post in your reply. Just post your questions or comments if you have any. I DON'T CHECK OR RESPOND TO PM'S.
5/31/2014 Update - The Palm Treo Pro 850 and HTC Touch Pro's MMS are now working again as well.
5/20/2014 Update - As of 5/19/2014, Sprint has removed the HTC Touch Pro2 from the list of decommissioned picture mail phones. MMS is now working again on the HTC Touch Pro2.
5/1/2015 Update - As of 4/30/2014, if you have a flashed phone, Sprint has decommissioned a bunch of older phones as far as MMS functionality is concerned. For more info, look here: https://community.sprint.com/baw/co.../2014/01/31/picture-mail-decommissioning-faqs and https://community.sprint.com/baw/thread/152977?start=0&tstart=0. This affects lots of donor phones including, but not limited to HTC Diamond, HTC Touch Pro, HTC Touch Pro2, Palm Treo 850 Pro, etc. The only way to get your MMS back on your flashed phone is to replace your donor. For Sprint legacy plans such as SERO, the Sprint Sanyo Incognito still works. For Boost, the Boost Sanyo Incognito works as well. Boost phones can't be activated with Sprint, but select Sprint phones can be activated with Boost. None of the mentioned methods below will fix your MMS if your donor phone's MMS has been decommissioned by Sprint.
Background: I bought 2 Galaxy S3's. One had the problem out of the box, and the other was just fine. A friend had a problem as well. It seems some Galaxy S3's may have shipped with a defective APN config setting. Method 1 and Method 3 are the "real" fixes, but they require a rooted phone. Method 2 is more of a work around and doesn't require a rooted phone. You must use 8sms app instead of the stock messaging app for SMS/MMS messages.
If you'd like to thank me, please click on the "Thanks" button instead of posting a thank you note. Let's save storage and bandwidth. And please, please, please...DO NOT QUOTE THIS POST IN YOUR REPLY JUST TO THANK ME!
Method 1 - (the real fix, but requires a rooted phone):
***UPDATE***
I've confirmed that this method works on ICS (4.0.4), Jellybean (4.1.1, 4.1.2, 4.2.2, 4.3) , and KitKat ( 4.4.2) . Tested and working on Galaxy S3, S4, Note 2, and Note 3.
1a) Download this working Sprint APN xml file: https://www.box.com/s/40x5ac2c6u0ckzfz59ig (click on download button at the top)
OR
1b) For Boost, download this xml file: https://www.box.com/s/o9folfrq00ee9p2qj5pv (click on download button at the top)
OR
1c) For Virgin Mobile, download this xml file: https://www.box.com/s/9itl21drpp84enqeszc9 (click on download button at the top)
2) Download and install "APN Backup & Restore" from the Google Play Store to your phone: https://play.google.com/store/apps/details?id=com.riteshsahu.APNBackupRestore&hl=en
3) Convert the "APN Backup & Restore" into a system app by either using Titanium Backup, or simply use Root Explorer/ES File Explorer (root enable it) to move the APK from /data/app to /system/app. For KitKat, move it to /system/priv-app.
4) Reboot the phone.
5) Launch the app, click on menu, then click on "Disable ICS Check".
6) In the main app menu, click on "Backup APNs". This will create a directory called "ApnBackupRestore" in your /mnt/sdcard.
7) Copy the xml file from step 1 to the /mnt/sdcard/ApnBackupRestore folder.
8) Go back to the main app menu, click on "Delete APNs" and confirm it.
9) Go back to the main app menu, click on "Restore APNs".
10) Choose the file you downloaded from step 1 and confirm it.
11) Reboot your phone.
12) Done.
NEW Method 2 (work around, doesn't require rooted phone) - Uses 8sms app which is lightweight unlike other 3rd party bloated messaging apps such as Go SMS Pro, Handcent, etc. More details about the extra features of this app can be found here: http://forum.xda-developers.com/showthread.php?t=2398767
1) Download and install 8sms app to your phone from the Google Play Store here or from the developer's site here.
2) Launch 8sms app.
3) Press Menu button on your phone.
4) Choose Settings
5) Choose MMSC Settings
6) Press "MMSC".
7a) Type in "http://mms.sprintpcs.com" - do not include the double quotes. Press OK button.
OR
7b) Type in "http://mm.myboostmobile.com" for Boost
OR
7c) Type in "http://mmsc.vmobl.com:8088/mms?" for Virgin Mobile
8) Press "MMS PROXY".
9) Type in "68.28.31.7" (Sprint & Boost) OR "205.239.233.136" (Virgin Mobile) - do not include the double quotes. Press OK button.
10) Press "MMS PORT".
11) Type in "80" (Sprint & Boost) OR "81" (Virgin Mobile) - do not include the double quotes. Press OK button.
12) (optional) Press "MMS over WiFi". I know this works for Sprint. Not sure if it works for Boost or Virgin Mobile.
13) Press phone's back button.
14) Choose "Phone Number" under the Extra Settings section and enter your 10 digit phone number.
15) Press OK button.
16) Press phone's back button.
17) Send/receive a few SMS/MMS messages to test.
18) (optional) You can also configure the app's extra settings such as enabling EMOJI, etc.
19) Done.
Hidden below is the OLD Method 2 - Uses Go SMS Pro which is too bloated and doesn't work well with apps such as Avast Mobile Security
OLD Method 2 - Uses Go SMS Pro which is too bloated and doesn't work well with apps such as Avast Mobile Security - (work around, doesn't require rooted phone)
1) Download and install Go SMS Pro to your phone from the Google Play Store.
2) Launch Go SMS Pro and skip through the intro message screens.
3) Skip the Go Chat Service offer unless you really want that.
4) Press Menu button on your GS3.
5) Choose Settings.
6) Scroll down the menu and choose Set default SMS program.
7) Press each entry in the list and put a check mark on "Use by default for this action" then choose Go SMS Pro. When both are done, press the back button on your phone.
8) Up on top, press "Advanced"
9) Scroll down the list and press "MMS Settings"
10) Scroll down the list and put a check mark on "Fill APN configuration manually"
11) Press "MMSC".
12a) Type in "http://mms.sprintpcs.com" - do not include the double quotes. Press OK button.
OR
12b) Type in "http://mm.myboostmobile.com" for Boost
OR
12c) Type in "http://mmsc.vmobl.com:8088/mms?" for Virgin Mobile
13) Press "MMS PROXY".
14) Type in "68.28.31.7" (Sprint & Boost) OR "205.239.233.136" (Virgin Mobile) - do not include the double quotes. Press OK button.
15) Press "MMS PORT".
16) Type in "80" (Sprint & Boost) OR "81" (Virgin Mobile) - do not include the double quotes. Press OK button.
17) Press back button on phone twice.
18) Send/receive a few SMS/MMS messages to test.
19) Done.
Method 3 - (also a "real fix", but requires a rooted phone and custom recovery such as TWRP, ClockWorkMod, etc.) PLEASE LEAVE FEEDBACK IF THIS METHOD WORKED FOR YOU!
Disclaimer: I'm not responsible if this breaks your phone. Proceed at your own risk! These scripts will replace your old apns-conf.xml file in /system/etc and will delete your telephony.db. When your phone reboots, the telephony.db will get recreated according to the content of your apns-conf.xml file. Thanks to oakieville for the script!
1) Boot into your custom recovery.
2) (optional, but highly recommended) Perform a nandroid backup using your custom recovery before you apply this fix just in case!
3) Not sure if this is necessary, but go ahead and wipe cache and dalvik cache.
4) Flash ONE of these:
Sprint (original, stock, working MMS for Sprint): https://app.box.com/s/m2pq7sesi6aexwa9zu3g
Boost: https://app.box.com/s/dt16cd44hsix3n2dl0mf
Virgin Mobile: https://app.box.com/s/395osivovclbbr44p5w1
5) Reboot your phone.
6) Done.
7) Please leave feedback if this method worked for you!!!
If you'd like to thank me, please click on the "Thanks" button instead of posting a thank you note. Let's save storage and bandwidth. And please, please, please...DO NOT QUOTE THIS POST IN YOUR REPLY JUST TO THANK ME!

AlpineMan said:
Background: I bought 2 Galaxy S3's. One had the problem out of the box, and the other was just fine. A friend had a problem as well. It seems some Galaxy S3's may have shipped with a defective APN config setting.
To fix:
1) Download this working Sprint APN xml file: http://www.mediafire.com/view/?jx41lw4w5107frt
2) Download "APN Backup & Restore" from the Google Play Store.
3) Convert the "APN Backup & Restore" into a system app by either using Titanium Backup, or simply use Root Explorer/ES File Explorer (root enable it) to move the APK from /data/app to /system/app.
4) Reboot the phone.
5) Launch the app, click on menu, then click on "Disable ICS Check".
6) In the main app menu, click on "Backup APNs". This will create a directory called "ApnBackupRestore" in your /mnt/sdcard.
7) Copy the xml file from step 1 to the /mnt/sdcard/ApnBackupRestore folder.
8) Go back to the main app menu, click on "Delete APNs" and confirm it.
9) Go back to the main app menu, click on "Restore APNs".
10) Choose the file you downloaded from step 1 and confirm it.
11) Reboot your phone.
12) Done.
Click to expand...
Click to collapse
Thanks Alpineman! You are the man and a great help to the android community. Without you, I wouldn't have been able to get my Galaxy S3 to work on my Legacy SERO plan and now you have helped me get my MMS working again. Thanks!

Think this should be posted on both original / or Android Dev side
Good stuff bro. Thanks for this quick and easy tutorial!! :good:

I am unable to receive MMS from anyone that doesn't own a sprint phone. I am however able to send M M S. Do you think this will help with that.
Sent from my SPH-L710 using xda app-developers app

AlpineMan said:
Background: I bought 2 Galaxy S3's. One had the problem out of the box, and the other was just fine. A friend had a problem as well. It seems some Galaxy S3's may have shipped with a defective APN config setting.
To fix:
1) Download this working Sprint APN xml file: http://www.mediafire.com/?jx41lw4w5107frt
2) Download "APN Backup & Restore" from the Google Play Store.
3) Convert the "APN Backup & Restore" into a system app by either using Titanium Backup, or simply use Root Explorer/ES File Explorer (root enable it) to move the APK from /data/app to /system/app.
4) Reboot the phone.
5) Launch the app, click on menu, then click on "Disable ICS Check".
6) In the main app menu, click on "Backup APNs". This will create a directory called "ApnBackupRestore" in your /mnt/sdcard.
7) Copy the xml file from step 1 to the /mnt/sdcard/ApnBackupRestore folder.
8) Go back to the main app menu, click on "Delete APNs" and confirm it.
9) Go back to the main app menu, click on "Restore APNs".
10) Choose the file you downloaded from step 1 and confirm it.
11) Reboot your phone.
12) Done.
Click to expand...
Click to collapse
Thank you very much, now my phone to work properly.

cant do it says does not support 4.1

I have not tried this on Android 4.1...Only on ICS. You can downgrade to ICS first, apply the fix, then upgrade to 4.1. The fix should carry over.
Sent from my SPH-L710 using Xparent SkyBlue Tapatalk 2

Tried this method on AOKP 4.1 and lost the ability to receive any SMS or MMS. I then Odined back to stock Touch Wiz 4.04, rooted and tried again. I still can't receive any SMS/MMS at all since trying it, but I can send SMS just fine... Probably gonna Odin back to stock and take my phone to the store tomorrow as I have no idea what to try next and no SMS is no cool

meatflaps said:
Tried this method on AOKP 4.1 and lost the ability to receive any SMS or MMS. I then Odined back to stock Touch Wiz 4.04, rooted and tried again. I still can't receive any SMS/MMS at all since trying it, but I can send SMS just fine... Probably gonna Odin back to stock and take my phone to the store tomorrow as I have no idea what to try next and no SMS is no cool
Click to expand...
Click to collapse
Did you try reflashing the aokp rom? I tried this fix earlier and it didn't work for me either and I also could not send or receive afterwards. I then wiped and just flashed aokp again like a new install and all was well after that. I would try that before deciding to take your phone back to the store.

Anastayja said:
Did you try reflashing the aokp rom? I tried this fix earlier and it didn't work for me either and I also could not send or receive afterwards. I then wiped and just flashed aokp again like a new install and all was well after that. I would try that before deciding to take your phone back to the store.
Click to expand...
Click to collapse
I didn't try reflashing AOKP because I still couldn't receive any texts at all, SMS or MMS. I'm in the process of Odining back to stock, maybe I'll re-root, try the fix, and reflash AOKP before the night is over.
Does Odin not return the APNs back to stock? My phone worked fine (minus MMS a known issue w/ AOKP) until I tried this fix.

meatflaps said:
I didn't try reflashing AOKP because I still couldn't receive any texts at all, SMS or MMS. I'm in the process of Odining back to stock, maybe I'll re-root, try the fix, and reflash AOKP before the night is over.
Does Odin not return the APNs back to stock? My phone worked fine (minus MMS a known issue w/ AOKP) until I tried this fix.
Click to expand...
Click to collapse
You didn't need your apn settings to work in order to reflash aokp. What wiping (cache, dalvik, system and factory reset) then reflashing would have done would have restored aokp to your phone as a fresh install and reset your apn settings.

Anastayja said:
You didn't need your apn settings to work in order to reflash aokp. What wiping (cache, dalvik, system and factory reset) then reflashing would have done would have restored aokp to your phone as a fresh install and reset your apn settings.
Click to expand...
Click to collapse
Ok, rooted once more, wiped cache/dalvik, did a factory data reset, then flashed AOKP 9-11, sent a regular old SMS to my gf who is sitting right next to me. She got the text within 2-3 seconds and replied back. It's now been just over 5 minutes and I haven't received her reply SMS.
I've been rooting my phones for 3+ years now, always carefully following instructions from XDA and I've never had an issue that I couldn't fix myself. I just have no idea what else to try =/

Deleted

Thanks, using gosms fixed the problem on my jellybean device

Deleted. :sly:

I'm going to have to try this later.. I'm on CREDO mobile..bit the phone did come with sprint 4g splash screen when I received it from * the company.. hah. So perhaps it will work? Who knows.
Running aokp/jb milestone 1 w/PMR on el26.
Thank you!
Sent from my SPH-D710 using xda app-developers app

fix mms
my method only works on rooted phones but is quite simple i have sprint gnex on verizon pp mms working through native app
download apn manager
install root explorer or equivalent take apn manager and place in system apps folder set permissions reboot open apn manager in app drawer set your apn done

Just tried this method and it worked for me on my e4gt running aokp jb m1
Sent from my SPH-D710 using xda app-developers app

Method 1 worked great, thank you!
Sent from my SPH-D710 using xda app-developers app

[Q] note ii only Edge working (tmobile)

So here's the story, I followed these instructions to allow tethering to my rooted note ii (stock rom, no flashing, no counter trip), which all worked fine until yesterday morning I now have only Edge, which barely works. I tried flashing the APN below again, to no avail. I had to call tmobile and do a new APN with their settings, which I will post under the 1-30 instructions. After doing that, 4G worked, but after reflashing the APN for tethering I have no data. After doing the t-mobile instructions, I still only have Edge again. Help anyone?!:
01. Have a T-Mobile T889 Samsung Galaxy Note 2
02. Download these files: http://forum.xda-developers.com/atta...1&d=1351716949
03. Extract files to folder on Desktop
04. Root your T-Mobile T889 Samsung Galaxy Note 2
05. Once rooted, make a COMPLETE backup using CWM or Titanium Backup (I did BOTH just in case, I like to be double sure I have a backup)
06. Once backed up, go to Google Play Market and download "APN Backup & Restore"
07. Once installed, open APN Backup & Restore and press on "OK" on the warning message that comes up
08. Close APN Backup & Restore (from task manager too, just in case)
09. Open Titanium Backup and press on Backup/Restore
10. Find the application "APN Backup & Restore" and long press with your finger on it
11. Once menu comes up, press on "Convert to System App"
12. Once done, close Titanium Backup (from task manager too, just in case)
13. Open APN Backup & Restore and press on "OK" on the warning Message that comes up
14. Press on the menu button on the phone and press on "Disable ICS Check"
15. Close APN Backup & Restore (from task manager too, just in case)
16. Open APN Backup & Restore and press on "Backup APNs"
17. Select a name or leave the one in there
18. Once backed up, close APN Backup & Restore (from task manager too, just in case)
19. Connect your phone to your computer
20. Once connected, navigate to your phone drive in My Computer and go to "Phone > ApnBackupRestore" > Copy the created XML file to your computer (once again, just in case)
21. While still in the "Phone > ApnBackupRestore" folder copy/cut/paste the "T-Mobile-APN.xml" file to that folder
22. Once the file has been copied to the "Phone > ApnBackupRestore" folder, open up APN Backup & Restore application on your phone
23. Once open, press on "Delete APNs" and press "Yes"
24. Once deleted, press on "Restore APNs" and select the T-Mobile-APN.xml (the one we originally copies from the zip folder that needed to be downloaded/extracted to a folder on your Desktop, and press "OK"
25. It will then restore the newly modified APN file
26. Close APN Backup & Restore (from task manager too, just in case)
27. Go to Google Play Market and download "Tethering Widget"
28. Once installed, go to the APPS icon on your phone and select Widgets tab on top and drag the Tethering Widget to a new page
29. You should now be able to successfully enable native tethering via the Widget
30. MISSION COMPLETE
*NOTE: DO NOT GO INTO THE ACTUAL T-MOBILE HOTSPOT APPLICATION AS IT WILL OVERWRITE THE APNS AND TETHERING WILL NO LONGER WORK. IF THAT HAPPENS, REPEAT STEPS 23-30.
Here are the APN settings from tmobile:
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 261.155.165.050
MMS Port: 8080
MMS Protocol: WAP 2.0 (don't know if this is important)
MCC: 310
MNC: 260
APN Type: (leave this blank)

I am having data issues period. Horrible download speeds inside my house and at work. Works fine outside well deoends where you are as well. I have called tmobile several timesbon this issue. Its not you its tmobile. Its been like this for almost a month for me.
Sent from my SGH-T889 using xda premium

it's worked fine all week. literally been just the last day. has this happened the whole time?

theromanone said:
it's worked fine all week. literally been just the last day. has this happened the whole time?
Click to expand...
Click to collapse
Mine was working fine then just poops out. Like right now im at work and I know I have great data speeds here at least 10-15 now since yesterday max 300kpbs. Dont know why. But I have been calling tmobile for almost 3 weeks. You should call and let them know so that im not the only one with this problem calling. Its been happening even before my note2. I had sensation 4g and that was getting poor data all the sudden. Not sure what's going on.
Sent from my SGH-T889 using xda premium

[HOW-TO] Flash Sprint Galaxy S3 to metropcs with 3G speeds..

Hi there every one I have been flashing phones to metro PCS for a while now But this is my first How to. I'm going to show you how to flash your sprint/Verizon Galaxy S3 to metropcs or cricket, with 3g data working.
What you'll need:
DFS demo mode will do. But if you can, make a small donation.
Samsung drivers. Just download keys from http://www.samsung.com/us/kies/
metropcs Prl 3032 from here http://metroprl.blogspot.com/
WARNING!! YOUR PHONE MUST BE IN METROPCS INVENTORY IN ORDER TO GET SERVICE, YOU CAN FLASH YOUR PHONE ALL DAY BUT IF YOU DO NOT HAVE YOUR ESN IN METROPCS DATA BASE THEN YOU WON'T GET SERVICE NO MATER WHAT YOU DO. UNDERSTOOD?
One of the first things you'll need is to get your phones MSL number, this is the number you'll need to get access to your phones secret menu. The method i am about to show you was discovered by billard412 this post, http://metroprl.blogspot.com/ if you have a verizon your MSL is 000000
Now lets get that MSl (you must be rooted) download terminal emulator or the, Get my msl app from market. Now on your dial pad type ##3282# now you'll have a screen with vie or edit click on edit, now open terminal emulator or the app, if you are using terminal type: su then enter---now type-- getprop ril.MSL then enter you might get a nothing back or you might get the number.
ps: if you are on JL13 you won't be able to get it downgrade your base-band.
if you didn't get nothing back go the the screen that asks for your msl and type any 6 digit number when it sais wrong code go back to the terminal and re type the comand and wala. If you use the app same steps just whith the app.
Now that you have your MSL open DFS, now go to your phones dial pad and dial *#7284# and select qualcome USB Setting, now select the last option DM+MODEM+ADB and plug in your usb to your pc. I normally open device manager to see what port my phone is, I sugest you do the same.
Now that you know what port your phone is on DFS click on the port tab and select your port now find the MSL or SPC space and enter your MSL then hit the play button to the left, now that your phone is unlocked we are ready to make changes.look at my images so you can compare.
Click on the programming Tab
Now hit the read button and change the MIN number MIN D , SPC, and MND number for the one provided by metropcs.
Now look to the right is the PRL section click on the load button look for the prl the click on the write button, now on the reset button and your phone will reset, I like to do it one step at a time. Now test out the PRL by going to settings about. or just dial *611 from phone and you should get metropcs. If you didn't, make sure that the mid has changed.
Onece you have that Down re hook up your phone to DFS like before click on te program tab and now on the Data tab. Change settings to match my pics and to get your password use this http://www.whiterabbit.org/android/ to calculate your metropcs MSL just type in your ESN . Once you have it hit write.
Now click on the mobile ip tab and hit read change setting to match pic in the AAA and the HA put in your metropcs MSL ,then hit both of the write buttons, and then the reset button, wala your almost done.
next step set data setting within the phone to stream youtube, Pandora and other multimedia apps that need streaming with in cricket or metropcs
dial ##data# press on edit and enter the spc code you wrote down press on others press on multimedia rtsp proxy port to 0 then press on back.
MMS: follow this guide by Max_pain: http://forum.xda-developers.com/showthread.php?t=1875760 you will need a file from there make sure to thank him.
This is the biggest hurdle, which very few people have successfully gotten to work. It is not a perfect solution but it works very well for us.
Download the following Zip file (not flashable):
Follow these instructions carefully:
1. Download and install Titanium Backup. You will also need the PRO version, so you'll need to shell out a couple of bucks if you don't already own it. It's well worth it anyways.
2. Download and install APN Backup & Restore from the Market.
3. Open APN Backup & Restore, ignore the ICS warning, and click on "Backup APNs". Exit out of APN Backup & Restore.
4. Place this folder in your SD Card.
5. Copy MetroPCS_MMS_Send_APN.xml from this folder to the APN Backup folder in the root of the SD Card.
6. Open Titanium Backup, go under Backup/Restore, and find APN Backup & Restore, press and select "Make system app."
7. Open APN Backup & Restore, ignore the ICS warning, press menu, and disable ICS check. Exit APN Backup & Restore.
8. Open APN Backup & Restore again, and now there should not be an ICS warning!
9. Click on "Delete APNs."
10. Click on Restore APNs and select "MetroPCS_MMS_Send.APN.xml".
10a. Press Ok after selecting the above.
10b. Press No when you get the message asking Yes or No.
11. Using Root Explorer or a similar app, copy the SecMMS.apk file from this folder to your /system/app/ folder.
11a. Make sure you are in R/W mode and click Yes to overwrite existing file if you get the message.
11b. Make sure to delete/overwrite any existing SecMms.apk from the /system/app directory. You should only have one SecMms.apk file.
11c. Make sure to delete any SecMms.odex if you're on the stock or an odexed rom.
12. Set permissions to RW-R--R--
13. Reboot.
14. Open the Messaging app and under Settings make sure to check (enable) "SMS split".

Help
kipster3001 said:
Hi there every one I have been flashing phones to metro PCS for a while now But this is my first How to. I'm going to show you how to flash your sprint/Verizon Galaxy S3 to metropcs or cricket, with 3g data working.
What you'll need:
DFS demo mode will do. But if you can, make a small donation.
Samsung drivers. Just download keys from http://www.samsung.com/us/kies/
metropcs Prl 3032 from here http://metroprl.blogspot.com/
WARNING!! YOUR PHONE MUST BE IN METROPCS INVENTORY IN ORDER TO GET SERVICE, YOU CAN FLASH YOUR PHONE ALL DAY BUT IF YOU DO NOT HAVE YOUR ESN IN METROPCS DATA BASE THEN YOU WON'T GET SERVICE NO MATER WHAT YOU DO. UNDERSTOOD?
One of the first things you'll need is to get your phones MSL number, this is the number you'll need to get access to your phones secret menu. The method i am about to show you was discovered by billard412 this post, http://metroprl.blogspot.com/ if you have a verizon your MSL is 000000
Now lets get that MSl (you must be rooted) download terminal emulator or the, Get my msl app from market. Now on your dial pad type ##3282# now you'll have a screen with vie or edit click on edit, now open terminal emulator or the app, if you are using terminal type: su then enter---now type-- getprop ril.MSL then enter you might get a nothing back or you might get the number.
ps: if you are on JL13 you won't be able to get it downgrade your base-band.
if you didn't get nothing back go the the screen that asks for your msl and type any 6 digit number when it sais wrong code go back to the terminal and re type the comand and wala. If you use the app same steps just whith the app.
Now that you have your MSL open DFS, now go to your phones dial pad and dial *#7284# and select qualcome USB Setting, now select the last option DM+MODEM+ADB and plug in your usb to your pc. I normally open device manager to see what port my phone is, I sugest you do the same.
Now that you know what port your phone is on DFS click on the port tab and select your port now find the MSL or SPC space and enter your MSL then hit the play button to the left, now that your phone is unlocked we are ready to make changes.look at my images so you can compare.
Click on the programming Tab
Now hit the read button and change the MIN number MIN D , SPC, and MND number for the one provided by metropcs.
Now look to the right is the PRL section click on the load button look for the prl the click on the write button, now on the reset button and your phone will reset, I like to do it one step at a time. Now test out the PRL by going to settings about. or just dial *611 from phone and you should get metropcs. If you didn't, make sure that the mid has changed.
Onece you have that Down re hook up your phone to DFS like before click on te program tab and now on the Data tab. Change settings to match my pics and to get your password use this http://www.whiterabbit.org/android/ to calculate your metropcs MSL just type in your ESN . Once you have it hit write.
Now click on the mobile ip tab and hit read change setting to match pic in the AAA and the HA put in your metropcs MSL ,then hit both of the write buttons, and then the reset button, wala your almost done.
next step set data setting within the phone to stream youtube, Pandora and other multimedia apps that need streaming with in cricket or metropcs
dial ##data# press on edit and enter the spc code you wrote down press on others press on multimedia rtsp proxy port to 0 then press on back.
MMS: follow this guide by Max_pain: http://forum.xda-developers.com/showthread.php?t=1875760 you will need a file from there make sure to thank him.
This is the biggest hurdle, which very few people have successfully gotten to work. It is not a perfect solution but it works very well for us.
Download the following Zip file (not flashable):
Follow these instructions carefully:
1. Download and install Titanium Backup. You will also need the PRO version, so you'll need to shell out a couple of bucks if you don't already own it. It's well worth it anyways.
2. Download and install APN Backup & Restore from the Market.
3. Open APN Backup & Restore, ignore the ICS warning, and click on "Backup APNs". Exit out of APN Backup & Restore.
4. Place this folder in your SD Card.
5. Copy MetroPCS_MMS_Send_APN.xml from this folder to the APN Backup folder in the root of the SD Card.
6. Open Titanium Backup, go under Backup/Restore, and find APN Backup & Restore, press and select "Make system app."
7. Open APN Backup & Restore, ignore the ICS warning, press menu, and disable ICS check. Exit APN Backup & Restore.
8. Open APN Backup & Restore again, and now there should not be an ICS warning!
9. Click on "Delete APNs."
10. Click on Restore APNs and select "MetroPCS_MMS_Send.APN.xml".
10a. Press Ok after selecting the above.
10b. Press No when you get the message asking Yes or No.
11. Using Root Explorer or a similar app, copy the SecMMS.apk file from this folder to your /system/app/ folder.
11a. Make sure you are in R/W mode and click Yes to overwrite existing file if you get the message.
11b. Make sure to delete/overwrite any existing SecMms.apk from the /system/app directory. You should only have one SecMms.apk file.
11c. Make sure to delete any SecMms.odex if you're on the stock or an odexed rom.
12. Set permissions to RW-R--R--
13. Reboot.
14. Open the Messaging app and under Settings make sure to check (enable) "SMS split".
Click to expand...
Click to collapse
i tried this and dont know why my s3 keep saying Sprint and it dosent receive calls o text...
Can you please please help me if i do something wrong

Working Talk Text and Data
I literally got my talk text and data working 2 min ago. I have a Verizon Samsung Galaxy S3 that I now am using on Metro PCS.
What I did,
Step 1.
Install Samsung Drivers
Install Kies (To update: I was on 4.1.1 now I'm running 4.1.2)
Step 2.
Root Samsung Galaxy S3. I used Casual one click (It's literally one click)
- Google search key phrase 'root verizon samsung galaxy s3 casual one click'
Step 3.
Now you should have SuperSU
Download
1. APN Manager- I have APN Manager Pro
2. Titanium Backup
Step 4.
I used Titanium Backup to uninstall all the Verizon bloatware, and overall junk I don't use. With removing bloatware click on backup/restore then select and hold APN Manager Pro (or whatever) and select convert to system app.
Step 5.
If not updated to 4.1.2, do so. - You'll need to have the ability to add an APN, only possible with 4.1.2.
I bypassed setting the language etc. with the four corners technique. Google Keyword: 'android four corners trick'
Step 6.
I went out and activated a MetroPCS plan, and got a simcard. At this point I could make and receive calls and text, but no data or mms.
Step 7.
From APN Manager Pro I clicked insert new APN. this can also be done from settings -> More settings -> Mobile Networks -> Access Point Names -> More options soft key: Add new access point. (Updating from phone settings in my opinion is simpler)
Step 8.
New APN
Name: "fast.t-mobile.com" (You can put whatever you want)(without quotes)
APN : "fast.t-mobile.com" (without quotes)
MMSC: "htetep:mms.msg.eng.t-mobile.com/mms/wapenc" (without quotes.Sorry i think you understand what i mean, please put in the letters and not htetep)
MCC: 310
MNC: 260
make sure APN is enabled is checked
Everything else has 'Not set', my APN protocol also says IPv4
Step 9.
Close settings completely
Go back to settings --> Access Point Names to make sure it is still there. Select it if not selected already.
Step 10.
Power off
pull out battery and sim card
wait 10 sec
power on
Step 11.
Enjoy data and mms.

Thank you guys for the instructions, I think I'm about to do the same for my Verizon S3.
But before I do, can you guys post what kind of speed you're getting on the new Metro(GSM)/T-Mobile 3G network?
I remember MetroPCS original 3G on CDMA was horrible and I just want to make sure the Verizon S3 won't suffer the same faith.
Thanks again in advance for you input!

Has anyone tried this with either JB? My phone is on the 4.3 update and I was wondering if it will work.

trinibmw said:
I literally got my talk text and data working 2 min ago. I have a Verizon Samsung Galaxy S3 that I now am using on Metro PCS.
Click to expand...
Click to collapse
Your post is very promising to me since I'm looking to do the exact same thing and not looking forward to the complicated process detailed in the OP. I have a few clarifying questions I hope you don't mind answering for me:
1) Are you limited to 2G and 3G only, or are you able to have 4G/LTE connections?
2) Sorry to oversimplify your method, but boiled down, it sounds like you accomplished exactly what I want to do more or less by simply rooting, debloating, and changing the APN settings. Is this accurate? (Yes I've read your post all the way through five times+, I get there are certain important details to follow, but is my summary correct?)
3) I get the feeling you won't be able to answer this one, but worth a shot: Do you have any idea if this will work if the Verizon S3 came with KitKat (4.4.2) installed? Exhaustive research tells me it's impossible to downgrade android versions from this version.
Thanks for sharing this, and hopefully any answers you can give me. I'll be updating my post on whether or not it works for me when I try later

You are correct, root + debloat, change APN settings. When I had the phone I was limited to 3g speeds. I was still able to use maps, and surf without pulling my hair out. Although, most everywhere I went had wifi so I just ended up using that. As far as number 3, I am not sure. I no longer have the phone. Does the APN show up in network settings now? Could you just try the settings above? You could check if casual one click supports 4.4.2. If it does, you could give it a shot. I didn't have to use it, but if anything goes wrong use ODIN to restore your phone.

My sprint Samsung s3 has no card slot, and I'm with metro, can I use this method and get my metro plan on my s3??? Please need help!!!

[Q] CM 11 data connection troubleshooting (RESOLVED)

I have been running CM 11 Nightly builds, and everything has been working out pretty good, until just a day or so ago.
Now suddenly I find that I never get a data connection (3G, etc) - works fine on Wi-Fi of course though.
Using the FC09 multiboot, I am able to prove that it is not an issue with my phone hardware or my Sprint account.
FC09 has data connection and everything is cool, until I reboot into latest CM 11 (right now = cm-11-20140305-NIGHTLY).
(Since I don't have enough posts yet to ask this in the development thread, I thought I'd try here and see if I had any luck.)
In trying to research this, I see some talk of "APN settings" - but I cannot for the life of me figure out how to access those settings to change them
(Some advice said to speak "Open APN" into the voice dialer? But that is not doing anything for me...)
I guess I am also curious if this is happening to anyone else using CM 11 Nightly builds?
Again, the data connection works when I "multiboot" FC09, but cannot get it to work on latest CM 11 Nightly.
Any help or suggestions on things to check/tweak are highly appreciated - thank you in advance.

Yap... that append to me also, i'm on a GT-I9000 with the same NIGHTLY version. That must be a rom problem, because with the previous version, worked ok.

Getting closer to a solution (?)
Same problem (currently running cm-11-20140306-NIGHTLY)
I did finally figure out how to acces the "Open APNs" screen.
My mistake was trying to say "Open APN" from the regular phone dialer, which just threw the voice command to Google.
Then it suddenly clicked - they meant the separate application that is named "Voice Dialer".
(thought I would post that in case it saves anybody else some headache)
So then I found this buzzmobile link that lists "Sprint APN Settings for Android (US)"
http://buzzmobile.us/sprint-apn-settings-android-us/
I thought I was just about to get this all taken care of... BUT, now here is the problem:
No matter how many times I have tried to enter and re-enter the APN settings, they are not being saved.
I don't know if anyone has any experience with this issue, but if you have any advice, I am all ears - thank you.

Arson Smith said:
No matter how many times I have tried to enter and re-enter the APN settings, they are not being saved.
Click to expand...
Click to collapse
Boot into the temporary FC09 installation and try the "##DATA#" dialer code. If thats not the right code then its gotta be another one that allows you to access these settings. You may also need your MSL.

My journey
OK, so I'm back in business again, and thought I would share...
1) Booted into the "multiboot" FC09 and installed 'APN Backup & Restore' app
2) Made a backup .xml file from there
3) Rebooted back into CM11
4) Installed 'APN Backup & Restore' app - BUT - could not restore the APN .xml file yet - special steps needed to get this to work with KitKat
5) Installed 'ES File Explorer File Manager' app
6) Followed instructions in this article to change 'APN Backup & Restore' to a system app:
How To Install Any App As A System App On Android [Guide]
NOTE FOR KITKAT: where it says to move the app to /system/app, you actually have to move it to /system/priv-app
7) After following that, I opened up 'APN Backup & Restore' app, but I was confused that it still said "Unfortunately APNs cannot be restored or deleted on this device because Android 4.0+ does not allow 3rd party apps to Write APN Settings."
8) Then I realized that I still needed to go into the settings of the app and click 'Disable ICS Check'
9) Then the app was recognized as a system app and I could do a restore from my .xml file
[EDIT: attaching a .zip of the .xml file that I snagged from booting into FC09]