Develop Bugs

[Q] HBOOT 2.02 S-Off, now what?

So I have achieved S-OFF on my new EVO, and my HBOOT is version 2.02.0000
Radio - 2.15.00.09.01
During the process, i have tried to restore my operating system, but have failed to do it correctly...
What is the simplest method to get the phone booted back up? Should I be able to flash a custom ROM to restore the OS?
If yes, what Roms should I be able to use? it seems most of the ones I look at are not for hboot 2.02.0000
Sorry for the total noob post, I didn't really know unrevoked wasn't working for hboot 2.02.0000 until it was too late... I've rooted prior evos with no problems.
Update...
I have tried to flash a fresh rom, and when it is "Writing boot.img" i receive an error: "assert failed: write_raw_image("/tmp/boot.img","boot")
E: Error in /sdcard/fresh-evo-3.4.0.1.zip
(Status 7)

Assert failed

Hi, i'm trying to flash a miui rom but it's giving the below error:
assert failed: getprop('ro.product.device') =="bravo"
E:Error in /sdcard/Pays Desire gmiui.zip
(status 7)
Installation aborted.
I have try different miui rom but all of them is giving me this error. Long time ago i had install one and it was ok. Last week i had a usb bricked. I have follow the thread in this forum and was able to unbrick my desire. But now i can't install any miui rom. Pls can someone advice me what can be done.
HTC Desire
Rom: RCMixHD v3.0
baseband version: 32.44.00.32U_5.09.05.30_2

HTC Desire Nightmare

Hi guys, I'm having a nightmare today, I've searched various threads and tried numerous things to resolve these problems but i'm having no luck.
Currently I have a rooted HTC desire running HBOOT 0.75 and a LeeDroid Rom 3.0.6-R2 using apps2sd++ if I remember.
I've been trying to move over to the CyanogeMod 7 rom.
I have ClockWorkMod installed from the market, but it seems to have stopped working. Ive used the app and flashed ver 5.0.2.0 but when entering recovery it goes to the black screen with the red triangle.
Pressing UP+Power and installing the update.zip takes me to clockworkmod 2.5.0.7.
When trying to install CM-7 from here I get the following error:
Installing update...
assert failed: getprop("ro.product.device") == "
encore" || getprop("ro.build.product") == "encore"
|| getprop("ro.product.board") == "encore"
E:Error in /sdcard/update-cm-7.0.3-encore-signed.zip
(Status 7)
Installation Aborted
I've tried running this install with the 'toggle script asserts' option which also fails.
I've tried flashing a RUU to start fresh but I keep running into 171 and 170 errors and cant seem to find a way around this.
Is this just due to the old version of clockworkmod which appears to be running on my device? if so is it possible to update it? another way?
thanks for the help guys this is driving me mad.
EDIT:
Forgot to add I've tried running unrEVOked 3.32 and that fails on one of the last steps, maybe because my device is already rooted? Everything I've read said this should work.

You can make s-off and then flash whatever recovery you want.
Your can try running Unrevoked with custom recovery enabled and making root precess disabled. For both processes you need your phone working with some rom installed.
Swyped from SGS2.

I looked at S-Off but I'm not sure it will work on my Hboot;
Supported Devices
Revolutionary currently supports the following Android phones and HBOOT versions:
HTC Desire (bravo) 0.93.0001, 1.02.0001
My desire is 0.75 Hboot, I've restored the previous ROM and its up and running, just the old Leedroid.

make a goldcard and flash latest WWE RUU
actually you can just use this to S-OFF

A note to bortak's post: if your phone was not branded, you don't need to create goldcard. But having a goldcard is very good, just in case.
To get rid of the errors 170/171 (usb connection) errors, I recommend to flash the ruu via the PB99IMG.zip method:
http://forum.xda-developers.com/showpost.php?p=10509780&postcount=102

oh great, I'm getting errors when trying to S-off and after a quick google it looks like its because my phone has apps2sd+++ or similar which messes with the s-off process.
I'm going to look into flashing a different RUU somehow.
Error:
Just as Stage 3 says, waiting for Hboot flash.
Line 331 [-eq: unary opertator expected
Line 343 [-eq: unary opertator expected
Line 361 [-eq: unary opertator expected
Line 366 [-eq: unary opertator expected

Are you on a Gingerbread custom rom when running alpharev? If yes, change to a froyo one like DeFroST. Alpharev has problems with gingerbread sometimes.

Installing update...
assert failed: getprop("ro.product.device") == "
encore" || getprop("ro.build.product") == "encore"
|| getprop("ro.product.board") == "encore"
E:Error in /sdcard/update-cm-7.0.3-encore-signed.zip
(Status 7)
Installation Aborted
Click to expand...
Click to collapse
By the way, u was installing the cm7 for the wrong device!
The codename for our desire is bravo!!!!!!!!
try using the update-cm-7.0.3-bravo-signed.zip next time (or even better the latest nightly)

Problem solved.
We have sat 3 hours but phone is s-off'ed and running CM7 for bravo.
Swyped from SGS2.

Problem solved.
Because of the apps2sd partition on my SD card the s-off method would not work, and installing a RUU over the top was failing with my first goldcard. I managed to find my old 4gb gold card which I used to root the device 18 months ago.
Resolution:
Insert gold card, flashed an old Stock Modaco RUU.
Unrevoked - re-rooted.
Alpha-Rev - Boot CD S-off
fastboot flash recovery recovery.img
fastboot flash radio radio.img
Boot into recovery then install CM-7 from the correct zip, The encore zip was downloaded using Rom Manager, and I had just assumed(first mistake) it was the correct file.
A huge thank you goes out to kl_arnet who helped me out via Gtalk for 3hours+ while getting this sorted.
Seriously this guy has the patients of a saint and knows his stuff.

merlin051 said:
Problem solved.
Because of the apps2sd partition on my SD card the s-off method would not work, and installing a RUU over the top was failing with my first goldcard. I managed to find my old 4gb gold card which I used to root the device 18 months ago.
Resolution:
Insert gold card, flashed an old Stock Modaco RUU.
Unrevoked - re-rooted.
Alpha-Rev - Boot CD S-off
fastboot flash recovery recovery.img
fastboot flash radio radio.img
Boot into recovery then install CM-7 from the correct zip, The encore zip was downloaded using Rom Manager, and I had just assumed(first mistake) it was the correct file.
A huge thank you goes out to kl_arnet who helped me out via Gtalk for 3hours+ while getting this sorted.
Seriously this guy has the patients of a saint and knows his stuff.
Click to expand...
Click to collapse
Yes he has
Sent from my HTC Desire using XDA Premium App

Back to stock problem

Hi. My friends asked me to bring a stock software to his Wildfire. Unfortunately I have a few problems I can't solve. Wildfire is on CM 7.2.0 RC1, Baseband version 13.55.55.24H_3.35.20.10, Kernel 2.6.35.14-nFinity [email protected] #1. I suspect he installed CM 7 using ClockWorkMod v5.0.2.8 (this version is istalled).
In bootloader menu I have this info:
Revolutionary
buzz pvt ship s-off
hboot-6.01.1002
microp-0622
radio-3.35.20.10
I tried to install stock software using .exe file from this thread, but after verification it shows me USB connection error - phone is not connected.
So I decided to flash a zip file from this thread. But after wiping and selecting a zip file in update menu, CMW shows me this message:
amend scripting (update-script) is no longer supported. Amend scripting was deprecated by google android 1.5. It was necassery to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery. Please switch Edify scripting (updater-script and update-binary) to create working update zip packages. Installation aborted.
Click to expand...
Click to collapse
I don't know what to do now. Can anyone tell me what should I do to bring back this phone to stock software?

noc123 said:
Hi. My friends asked me to bring a stock software to his Wildfire. Unfortunately I have a few problems I can't solve. Wildfire is on CM 7.2.0 RC1, Baseband version 13.55.55.24H_3.35.20.10, Kernel 2.6.35.14-nFinity [email protected] #1. I suspect he installed CM 7 using ClockWorkMod v5.0.2.8 (this version is istalled).
In bootloader menu I have this info:
Revolutionary
buzz pvt ship s-off
hboot-6.01.1002
microp-0622
radio-3.35.20.10
I tried to install stock software using .exe file from this thread, but after verification it shows me USB connection error - phone is not connected.
So I decided to flash a zip file from this thread. But after wiping and selecting a zip file in update menu, CMW shows me this message:
I don't know what to do now. Can anyone tell me what should I do to bring back this phone to stock software?
Click to expand...
Click to collapse
Flash this file inside your recovery, it will give you a temporary 2.5 recovery which will allow you to flash the .zip file.

nejc121, thank you very much. Wildfire has a stock software now.

Lesicnik1 said:
Flash this file inside your recovery, it will give you a temporary 2.5 recovery which will allow you to flash the .zip file.
Click to expand...
Click to collapse
could you help me for this please

Status 7 error installing SuperSU

Hi everybody, big problem.
I unlocked the device with HTCdev, all ok.
Flashed the custom recovery philz_touch_6.19.3-endeavoru (when using it says PhilZ Touch 6.19.3 Clockworkmod v6.0.4.7)
It can boot and works, made a backup of custom ROM before doing everything.
Tried to install cwm-SuperSU-v0.94.zip
It starts and then get out some logs telling mounting /system and rootfs, removing old files, creating space, extracting files, restoring files, setting permissions here goes KO:
set_perm: some changes failed
E:ERROR in /storage/sdcard00/CWM-SuperSU-v0.94.zip
(Status 7)
Installation aborted
Now my phone in fastboot mode tells
*** UNLOCKED ***
EBDEAVORU PVT SHIP S-ON RL
HBOOT-1.72.0000
CPLD-None
MICROP-None
RADIO-5.1204.167.31
eMMC-bootmode: disabled
CPU-bootmode: disabled
HW secure boot: enabled
MODEM PATH: OFF
I tried to google a lot but not found where I am doing something wrong, tried also different versions but no one working.
Please give me some help and suggestions what could be wrong ?
How can I get root permissions to install custom ROM? (I tried even to install Venom ViperX however but it does not recognize the phone, i think, the log tells:
>>> Checking model ID
assert failed: getprop("ro.product.device") == "endeavoru" || getprop("ro.build.product") == "endeavoru" || getprop("ro.product.board") == "endeavoru"
and then finish.
Waiting your suggestions, many thanks!

Downgrade your recovery using Philz Recovery version 5.x and flash again.
Sent via Endeavoru

https://www.dropbox.com/s/qp21ubo10xetcvn/Philz recovery 5.15.9.img

THANKS
khairulez said:
Downgrade your recovery using Philz Recovery version 5.x and flash again.
Sent via Endeavoru
Click to expand...
Click to collapse
Many thanks with PhilZ 5 it works!
SuperSU installed correctly and now Venom ViperX is flashing...
Just to understand better, why with 6.19.3 version nothing more was working??

It's a kitkat based recovery and that brings some issues. But why did you install superuser before flashing viper x, viper x is already rooted and has su onboard.

Mr Hofs said:
It's a kitkat based recovery and that brings some issues. But why did you install superuser before flashing viper x, viper x is already rooted and has su onboard.
Click to expand...
Click to collapse
Honestly I did not thought about it... I was following a guide and was telling to install SU at the end to have root access... then I just read instal instructions of Venom but did not crosschecked them.
Thanks again!

It's fine to install SU on stock rom to have root access but v0.94 is too old.Like Mr Hofs says viper x is already have SU,no need to flash other SU.
Sent via Endeavoru

To root the stock rom yeah that's great, but when you flash the viper over stock you need to full wipe anyway so the stock rom you rooted is gone. To clarify something that might be confusing......the rom gets rooted, not the phone. That's a common mistake people make.