does anybody have a slight clue where i can get it??? just like the blackberry or similar.
Did you even look around before you posted? Look for IMSMS.
Reeg said:
Did you even look around before you posted? Look for IMSMS.
Click to expand...
Click to collapse
yea i looked around the post and yea i seen it..i dont like that one...
There are others, but they suck. IMSMS kicks ass.
If you don't like it, youmight want to watch the tutorial videos on the site that made it first, then you'll know how to use it.
The other Threader programs out there are...
These.
REDZ, you're pathetic.
Here you go bud:
http://trianglepowers.com/PPC/ViewApp.aspx?ID=60
Aside from some minor bugs, this app kicks IMSMS's arse!
I couldn't get IMSMS to catch sms messeges when they came in.
I read the recomended registry tweeks that they say should fix this problem but they say that it happens when you upgrade to winmob6 from winmob5.
My dash came with version 6 installed. Should I still try the tweaks?
I'd try them. I upgraded from WM5 to WM6, then to the new HTC rom, and this IMSMS has worked fine on both WM6 roms I've had on, no problems.
You went and checked all of the settings?
I WAS using Triangle Powers threader before, but it's buggy, likes to hang, and doesn't have some of the nice options that IMSMS has.
If trying to help folks learn to search for their own answers is pathetic, consider me the King.
Triangle Powers is better then IMSMS because it sometimes doesnt catch the messages and when it does it shows up both on the phone SMS and in IMSMS which is annoying... Is there anyway to fix this and my phone came with WM6 installed on it but I flashed it with HTC rom.
Really? I've never once had IMSMS miss a text, but Triangle Powers would miss one or two a day. Triangle powers likes to freeze up, and if you got 2 incoming messages from one person before you read the first one, the screen after you looked at it would be screwed up. Triangle Powers would leave DOZENS of copies of the same message thread in the task manager, and if you get a message in the middle of replying to one, you have to start all over.
IMSMS has a TON of options, and the best support site I've ever seen for software like this. If you haven't gone through all of the options on the program, or haven't at least watch the tutorial videos on the site, then you shouldn't be complaining. IMSMS is a bit more involved, but when mastered, a much better program all around.
Ok, i have loads of questions that i have been meaning to look up and hope i can just get some quick yes, no or "download this cab sucka" replies to my questions of today. Thanks much
Ok, I just got my phone a few weeks ago and have not really played with it till i went to London 2 weeks ago.
So what happened to your pictures going into landscape mode when you turn the phone? Has this been disabled?
Is it just my phone or is YouTube slow as all hell, if it even works at all.
Has anyone found a fix for S2U2 when it starts up in landscape, the screen is all messed up 90% of the time requiring me to close the phone to unlock it.
Has there been a Sony Panels cab made that works yet or has that idea gone away like the second coming of bell bottoms?
Anyway to get the 3d version of the stock tab back?
Why cant i get Skype to work?
And WHY does my dogs breath smell like boiled cabbage?!?! (yuck)
Is there a Tube station app someplace, for all of the London Underground?
My wife and I each purchased Tilt2's earlier this week. We both come from Windows Mobile 6.1 phones and are generally happy with WinMo products and comfortable with tweaking them.
We're both having some trouble with the Tilt2 and I'm hoping that someone here might be able to help.
1) Bluetooth sound quality - we each use Bluetooth headsets and have noticed lots of crackling unless the phone is turned with the back facing the headset. This didn't happen with our previous phones (same headsets) unless we got 15-20 feet away from the phone.
2) Dropped calls - I've noticed a ton of dropped calls when I'm talking on the phone and driving along my normal work commute. There are 1-2 holes along the route where my previous phone would drop, but this one drops 5-6 times. I found these radio updates in the ROM forum. Would that help?
3) General performance - The phone seems a little bit laggy and slow to react. Nothing like what we saw in demo videos on sites like wmexperts.com. My wife even reports that hers has completely locked up on her before. And I've noticed a severe lag waiting for the phone to come back after I've flipped the keyboard out. I assume that installing a custom ROM would help with this as it's helped on previous phones we've owned. However, there isn't a 100% working AT&T ROM to revert to yet (only one that appears to work is missing radio and bootsplash at this point) in case the custom ROM doesn't perform better, so I'm a little leary of doing it. Should I be worried? Or will the custom ROMs here help get rid of the lagginess.
4) Switching to landscape mode - My wife told me that her phone isn't always switching to landscape mode. She doesn't have any apps installed yet so I'm assuming it's in all of the default screens. Should everything work in landscape mode?
Thanks in advance!
e_dogg said:
My wife and I each purchased Tilt2's earlier this week. We both come from Windows Mobile 6.1 phones and are generally happy with WinMo products and comfortable with tweaking them.
We're both having some trouble with the Tilt2 and I'm hoping that someone here might be able to help.
1) Bluetooth sound quality - we each use Bluetooth headsets and have noticed lots of crackling unless the phone is turned with the back facing the headset. This didn't happen with our previous phones (same headsets) unless we got 15-20 feet away from the phone.
2) Dropped calls - I've noticed a ton of dropped calls when I'm talking on the phone and driving along my normal work commute. There are 1-2 holes along the route where my previous phone would drop, but this one drops 5-6 times. I found these radio updates in the ROM forum. Would that help?
3) General performance - The phone seems a little bit laggy and slow to react. Nothing like what we saw in demo videos on sites like wmexperts.com. My wife even reports that hers has completely locked up on her before. And I've noticed a severe lag waiting for the phone to come back after I've flipped the keyboard out. I assume that installing a custom ROM would help with this as it's helped on previous phones we've owned. However, there isn't a 100% working AT&T ROM to revert to yet (only one that appears to work is missing radio and bootsplash at this point) in case the custom ROM doesn't perform better, so I'm a little leary of doing it. Should I be worried? Or will the custom ROMs here help get rid of the lagginess.
4) Switching to landscape mode - My wife told me that her phone isn't always switching to landscape mode. She doesn't have any apps installed yet so I'm assuming it's in all of the default screens. Should everything work in landscape mode?
Thanks in advance!
Click to expand...
Click to collapse
As for #4: Not all programs have a landscape mode natively.
jlczl said:
As for #4: Not all programs have a landscape mode natively.
Click to expand...
Click to collapse
Thanks. I figured that she might be using an app that doesn't work in landscape since I haven't come across it yet.
Also, regarding #2, I should have mentioned that I have 4.48.25.20 as my current radio.
1) I use Jabra 2nd gen and mine is working great. A little crackling sound but nothing major.
2) Depend on the area you live and coverage, you might want to try different radio. I have stock radio and mine is working great. Better than my fuze was actually. I can get 1 or more bar than Fuze and call quality is super clear. No drop calls yet while I had like 2-3 drop calls with my fuze.
3) I am still running on stock rom and yes indeed it's slow and sluggish. I have to reset the phone physically sometimes. I am not too happy about moving the battery cover just to reset as well. With custom rom, the phone will be snappy since some people are running custom rom with their Tilt2 already. I am in the same boat as you. Waiting for the complete stock rom dump. Until then.
4) Not all the landscape work as you have already found out.
I use a BlueAnt and my BT reception is good.
I thought mine was slow at first but as I tweaked it a bit, turning off alerts and pop ups, it SEEMS to be more of what I expected.
Haven't had a dropped call issue.
But, I am thinking that I will flash the ROM when something comes along.
Thanks for the replies.
FWIW, my wife uses a Jawbone 2 and the crackling is noticable on both ends of the call. I use a first-gen Jawbone and have nocticed the crackling as well. It seems that it works better when the phone is on the same side of my body as the headset. I did not notice this crackling on my Dash and Blackjack 2 nor her Dash.
I think the dropped calls problem is definitely area related. My wife is currently out of town and it hasn't dropped her calls at all that I know of. And when I'm at home, it's no problem. It's just that on my regular commute, it drops 5-6 times where my previous Dash and Blackjack 2 only dropped once or twice occasionally. I've only made my commute once since I got the Tilt2, so maybe there were some coincidental network issues. That said, call quality has been very good.
I just turned off the new SMS notifications. I've also removed a couple of tabs that I know I'm never going to use (stocks, AT&T, and music) at that seems to have made things a little snappier too.
HAH! Not more than 1-2 minutes after I posted my last message (from my laptop), I went to use the internet connection on my Tilt2 and it locked up. A message appeared asking if I wanted to send error details to MS and then my phone turned off.
Another thing I've noticed is that Opera takes a *really* long time to switch from landscape to portrait. And it seems to be significantly slower than Opera Mini was on my Dash and Blackjack 2. Maybe because Opera Mini is Java-based on those platforms?
My wife is now reporting that her Tilt2 won't unlock unless she slides open the keyboard. Her Exchange connection requires the phone to automatically lock and require a PIN entry. I suggested tapping the power button but that doesn't wake it up, either.
Any suggestions? I'm thinking she might have a bum unit since mine isn't having nearly the trouble hers is.
As far as the lockups, I think there was a thread somewhere about that. Mine doesn't actually lock up but it hangs horribly. Give it 5min or so and it figures itself out, usually involves opening the keyboard at the same time it is launching something, sms in my case.
Suggestion? Hard reset hers and if it continues swap it out.
SoapDoctor said:
As far as the lockups, I think there was a thread somewhere about that. Mine doesn't actually lock up but it hangs horribly. Give it 5min or so and it figures itself out, usually involves opening the keyboard at the same time it is launching something, sms in my case.
Suggestion? Hard reset hers and if it continues swap it out.
Click to expand...
Click to collapse
Thanks for the tip. Unfortunately, she's out of town right now so I actually haven't seen the things she's complaining about first-hand (except for a couple of things that have happened on mine too).
I'll send her instructions for a hard reset and see if she's adventurous enough to try it on her own. The AT&T store near where she's at is exceptionally good - they really know Windows Mobile there and were a big help in getting the phone initially set up. So, worst case, she can go there and have them do it.
e_dogg said:
Thanks for the tip. Unfortunately, she's out of town right now so I actually haven't seen the things she's complaining about first-hand (except for a couple of things that have happened on mine too).
I'll send her instructions for a hard reset and see if she's adventurous enough to try it on her own. The AT&T store near where she's at is exceptionally good - they really know Windows Mobile there and were a big help in getting the phone initially set up. So, worst case, she can go there and have them do it.
Click to expand...
Click to collapse
Don't run to fast with my advice, I'm a complete noob but hard reset would be the first thing I would try. It is a microsoft product after all and I'm pretty dman lazy to run to the store first.
FWIW- I have a Jawbone 2 and have cracking in the audio. Had it with my Fuze also and have always wondered if it was the headset or phone. I don't think I could keep my fuze in the holster because of the crackling.
I have some slight performance issues, but it's not to bad. Seems mostly relating to minimizing a program and starting a new one.
I have a strange problem with the TF3D photo tab. It's slow to get the image clear. I select an image and then try to scroll through them. It hangs on one, then flips it's orientation (I haven't moved the phone though). Anyone else have issues with the photo tab?
e_dogg said:
My wife and I each purchased Tilt2's earlier this week. We both come from Windows Mobile 6.1 phones and are generally happy with WinMo products and comfortable with tweaking them.
We're both having some trouble with the Tilt2 and I'm hoping that someone here might be able to help.
3) General performance - The phone seems a little bit laggy and slow to react. Nothing like what we saw in demo videos on sites like wmexperts.com. My wife even reports that hers has completely locked up on her before. And I've noticed a severe lag waiting for the phone to come back after I've flipped the keyboard out. I assume that installing a custom ROM would help with this as it's helped on previous phones we've owned. However, there isn't a 100% working AT&T ROM to revert to yet (only one that appears to work is missing radio and bootsplash at this point) in case the custom ROM doesn't perform better, so I'm a little leary of doing it. Should I be worried? Or will the custom ROMs here help get rid of the lagginess.
4) Switching to landscape mode - My wife told me that her phone isn't always switching to landscape mode. She doesn't have any apps installed yet so I'm assuming it's in all of the default screens. Should everything work in landscape mode?
Thanks in advance!
Click to expand...
Click to collapse
#3 I am running NRG ROM Photon date 10/17 and it is insane on my tilt 2. No radio change either. Stupid fast, eye candy, and never a dropped call or sluggish issues. Link below (5k plus thread, really read the first page to see the versions and Faq's)
http://forum.xda-developers.com/showthread.php?t=553506
I'd like to add that I'm also having some issues with sound and response time.
My phone starts fresh with about 65% of resources used up. After regular phone/contacts usage for an hour I'm at around 70% and after Opera, the phone is done. I can browse or use file explorer or music but there goes the multi-tasking.
I haven't flashed a ROM yet. I just wanted to see what AT&T did with this thing 1st.
One more thing, why did they switch the FN and Shift keys? My brain is having a hard time getting used to it, especially when the shortcuts that require the Fn key are on the bottom row.
I can't really help you out too much, but I haven't been experiencing many of these problems at all, and I'm still on the stock rom, just cleaned it up a bit. Spend some time on the forums and you'll find some good quick hacks to try before you try a new rom.
superrrguy said:
I'd like to add that I'm also having some issues with sound and response time.
My phone starts fresh with about 65% of resources used up. After regular phone/contacts usage for an hour I'm at around 70% and after Opera, the phone is done. I can browse or use file explorer or music but there goes the multi-tasking.
I haven't flashed a ROM yet. I just wanted to see what AT&T did with this thing 1st.
One more thing, why did they switch the FN and Shift keys? My brain is having a hard time getting used to it, especially when the shortcuts that require the Fn key are on the bottom row.
Click to expand...
Click to collapse
Touch FLO 3D uses up quite a bit of RAM. I unloaded it and restarted, and my phone is down from 65% to 49%. Unfortunately, I'm kind of liking Touch FLO 3D
Linear2202 said:
FWIW- I have a Jawbone 2 and have cracking in the audio. Had it with my Fuze also and have always wondered if it was the headset or phone. I don't think I could keep my fuze in the holster because of the crackling.
I have some slight performance issues, but it's not to bad. Seems mostly relating to minimizing a program and starting a new one.
I have a strange problem with the TF3D photo tab. It's slow to get the image clear. I select an image and then try to scroll through them. It hangs on one, then flips it's orientation (I haven't moved the phone though). Anyone else have issues with the photo tab?
Click to expand...
Click to collapse
Good info about your Jawbone issues. I have an old Plantronics headset that I'm not really using anymore. Maybe I'll give that one a try to see if it's just that Jawbones don't like these new versions of HTC phones (it worked great on her Dash).
As for the photos tab, it seems to work ok. Though the first "flip" through the pictures seems to be slower than subsequent flips.
I found that hiding tabs I won't be using like the "AT&T" tab seems to help speed things up. I think I have 3 or 4 hidden.
amurch said:
#3 I am running NRG ROM Photon date 10/17 and it is insane on my tilt 2. No radio change either. Stupid fast, eye candy, and never a dropped call or sluggish issues. Link below (5k plus thread, really read the first page to see the versions and Faq's)
http://forum.xda-developers.com/showthread.php?t=553506
Click to expand...
Click to collapse
Thanks - good to hear of your sucess with the NRG ROM. That's the one I'm planning on trying since I really like the 6.5.1 changes.
redpoint73 said:
Touch FLO 3D uses up quite a bit of RAM. I unloaded it and restarted, and my phone is down from 65% to 49%. Unfortunately, I'm kind of liking Touch FLO 3D
Click to expand...
Click to collapse
Yeah, Touch FLO 3D sure is purty. And, now that I have the tabs sorted and hidden the way I like, it's very easy to use.
Just an update...the Energy ROM seems to have cured the dropped calls. With the stock AT&T ROM, calls dropped about 5-6 times on my regular commute. With the Energy ROM, not a single one!
Something that has happened to me now a few times...I get a call on the phone. Caller ID and picture show up fine. Screen turns off..later i turn the screen on and the phone number is not accurate any longer and the picture is gone..
Anyone had this happen to them?
Linear2202 said:
Something that has happened to me now a few times...I get a call on the phone. Caller ID and picture show up fine. Screen turns off..later i turn the screen on and the phone number is not accurate any longer and the picture is gone..
Anyone had this happen to them?
Click to expand...
Click to collapse
Yep - happened quite often with the stock AT&T ROM. I don't recall seeing it after switching to the Energy ROM.
Hey all,
I have my GF's KF which she gave me to flash full fledged android on for her. Everything went well but I notice that sometimes the touch screen doesnt register touches. I sometimes have to touch an icon like 4 or 5 times before it registers it. Is this a common thing with CM 10 on the KF or could the screen just be going bad? I've done some searching and found some people used an app for touch response. Scrolling and stuff is working fine and the screen is very responsive to swipes just not to touches.
TIA
Usually that happens to me on the browser when I have too many tabs open. Does it sound like that could be your problem?
soupmagnet said:
Usually that happens to me on the browser when I have too many tabs open. Does it sound like that could be your problem?
Click to expand...
Click to collapse
No, I dont have any browser tabs open, no apps really installed either. It's a clean install. I will have to sometimes touch an icon on the homescreen or app drawer a few times before it registers that I touched it
In the past there were issues but most are resolved when I had problems I used sgs touchscreen booster seems to work pretty well the keyboard and the browser are the goofiest at this point everything else seems solid... It would truly be a bummer if it were hardware related..
Edit: You have raised my curiosity though.. before flashing CM10 what wipes did you perform and in what order? I know stupid question but different devices different methods...
graffixnyc said:
Hey all,
I have my GF's KF which she gave me to flash full fledged android on for her. Everything went well but I notice that sometimes the touch screen doesnt register touches. I sometimes have to touch an icon like 4 or 5 times before it registers it. Is this a common thing with CM 10 on the KF or could the screen just be going bad? I've done some searching and found some people used an app for touch response. Scrolling and stuff is working fine and the screen is very responsive to swipes just not to touches.
TIA
Click to expand...
Click to collapse
Settings -> Advanced -> Touchscreen filter level.
Set it to 50 for a start. That should help.
You guys are never going to believe this. hahha I will have to take a video to show you. It was actually Nova launcher! For sh*ts and giggles when I was trying to figure it out I thought "well let me try trebucket or apex.. doubt it will make a difference but let me try" So I changed it to apex, and it registered every touch the first time. I switched it back to Nova and it would start acting up again, switched to trebucket and it was working fine again, switched back to nova and it started acting up again. I finally ended up using trebucket because I couldnt get the grid size to look right with Apex even after messing with it. I seriously couldnt believe it. I will post a video sometime today showing it.. It was very very odd