I would like to thank for all help and support
morfic, interloper, chris41g and talustus
Now to the kernel.
This kernel is for TW (stock based) JB roms only.
It will not work/boot with any of AOSP/AOKP/CM roms.
Current version is 0.4.3
This kernel is based on Samsung latest MA06 JB source
I'll be adding more features to and and will update thread as I go.
Flashed it on my phone. So far everything working.(2 hrs and counting).
- Upgraded to Linux version 3.0.71
- Available Schedulers
NOOP, CFQ, NOOP, DEADLINE, ROW, SIO - init.d support
- custom bootanimation support
- WiFi confirmed working.
- Added AGAT initlogo.lre
- Added Hotplug support. CPU1 is offline when is not needed.
- Available governors.
Adaptive, Lagfree, Ondemand, Performance, Hotplug, Userspace, Knoonservative - 64 GB SD Card support (don't have card to test it tho). Hope you guys can confirm it's working.
- OC'd to 1.97 GHz
- May be something else I can't recall.
Link:
v0.4.3
http://d-h.st/Wqb
Updated to Linux version 3.0.71. Fixed bootanimation support. It's working now.
v0.4.1 (MA06 source)
AGAT_JB_v0.4.1.zip
Added ROW and SIO I/O schedulers. Hotplug governor. Some source clean up.
Upgrade to Linux version 3.0.68
Edits for better deep sleep.
v0.4.0 (MA06 source)
AGAT_JB_v0.4.0.zip
v0.3.2
Small edits, clean up. Added SIO and VR schedulers
AGAT_JB_v0.3.2.zip
v0.3.1
added UC/UV/UC support.
AGAT_JB_v0.3.1.zip
v0.3.0
Updated to Linux version 3.0.48
AGAT_JB_v0.3.0.zip
v0.2.0
Added hotplug support and few governors. Updated to Linux 3.0.35
AGAT_JB_v0.2.0.zip
v0.1.0
AGAT_JB_v0.1.0.zip
If anyone wanna try to compile here link to my github:
https://github.com/agat63/AGAT_JB_kernel
I'll try to keep it up to date as I add features to it.
Enjoy.
reserved just in case I need it.
Thanks AGAT, can't wait to see this thing oc'd:beer: i'm hoping for 2.1GHz fingers crossed...
Can't wait. Your kernel kept me from jumping to the JB leaks until clark44 just released his rom.
Sent from my SPH-L710 using xda premium
Will this work on at&t running dragon Rom base on sprint leak jb?
Sent from my htc_jewel using xda premium
sgs2_1.6 said:
Will this work on at&t running dragon Rom base on sprint leak jb?
Sent from my htc_jewel using xda premium
Click to expand...
Click to collapse
I don't know.
If sprint's rom/kernels running on it this might run as well
But try it at your own risk.
Already yes
tmcwilliam01 said:
Can't wait. Your kernel kept me from jumping to the JB leaks until clark44 just released his rom.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Same here, I was really just waiting for source so I knew a custom kernel was close behind the roms
Version 0.2.0 is up and running,
Added few governors, hotplug support, Updated to linux 3.0.35.
Enjoy.
Does this support custom voltages? If so, what would be the recommended app for adjusting them
Sent from my SPH-L710 using xda app-developers app
JBakey said:
Does this support custom voltages? If so, what would be the recommended app for adjusting them
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
+1?
Sent from my SPH-L710 using Tapatalk 2
I tried ktoonservative and deadline and was getting some weird "hot restarts". Not sure how to explain it.
Compusmurf said:
I tried ktoonservative and deadline and was getting some weird "hot restarts". Not sure how to explain it.
Click to expand...
Click to collapse
Did you clear cache/Dalvik after flashing and then fixing permissions?
Ramondel said:
Did you clear cache/Dalvik after flashing and then fixing permissions?
Click to expand...
Click to collapse
Hey there Ramon... And thanks Agat!
Sent from my SPH-L710 using Tapatalk 2
OC UV Support?
Agat, will you be updating this so that we can OC and UV in the future, I know that this is just the second version on JB but I loved what you did with the ICS version. Thanks in Advanced TIA.
Ramon
Ramondel said:
Did you clear cache/Dalvik after flashing and then fixing permissions?
Click to expand...
Click to collapse
Of course and that's the only governor that exhibits it so far in my testing.
So does this give better battery?
Samsung Galaxy S III
Compusmurf said:
Of course and that's the only governor that exhibits it so far in my testing.
Click to expand...
Click to collapse
Have you tried Ktoonservative and Noop? This is what I am using and it is working fine. I am currently running a stress test using SetCPU and after 126891ms there were no errors from the CPU.
Ramon
Upstreammiami said:
So does this give better battery?
Samsung Galaxy S III
Click to expand...
Click to collapse
Supposed to, please try and report, the more the merrier... Thanks
Sent from my SPH-L710 using Tapatalk 2
Upstreammiami said:
So does this give better battery?
Samsung Galaxy S III
Click to expand...
Click to collapse
It should because if you use the correct governor it will ensure that the second CPU is in sleep mode unless it is needed to process phone requests. I have used Agat's kernel with ICS Roms like FreeGS3 and it has run great.
Ramon
Related
This kernel is for CM7, but should work on any AOSP Rom.
I am maintaining this kernel from now on.
Known bugs
None
If any bugs are found I will add it here
Stable V1.0.0.1
Features: New Smartass governor, Undervolted, SLUB unqueued allocater, BFQ v2, BFS 404, Readahead buffer increased to 1040, Optimized compiler (compiled with neon and cortex flags) , Lagfree Governor, swap support, bfs tweaks, smoothass governor, backported conservative and ondemand govs from 3.0 rc7, backported wifi driver from 3.0 rc7, cpuidle code from 3.0 rc6, minmax governor, interactiveX governor, vdd leves interface (supports scriptfusion from the tbolt forum and vipermod from the tbolt forum), call recording, other various tweaks and optimizations.
Click to expand...
Click to collapse
V4
Re based on official cm source, backport 3.0 rc6 cpuidle code, backport 3.0 rc7 wifi driver, remove call recording, add minmax governor, interactive gov is MIa
Click to expand...
Click to collapse
Features: New Smartass governor, Undervolted, SLUB unqueued allocater, BFQ v2, BFS 404, Readahead buffer increased to 1040, Optimized compiler (compiled with neon and cortex flags) , Lagfree Governor, Kernel now supports swap, smoothass governor, bfs tweaks, smoothass governor, backported conservative and ondemand govs from 2.6.39, backported wifi driver from 2.6.39, call recording support.
Click to expand...
Click to collapse
Stable 1.0.0.1
DOWNLOAD
md5
c8e40626e821c9ed7e2950d32cb503ad
V4
DOWNLOAD
md5
99f05f2aa5848d3e21ad52a050aa13f5
SOURCE
To keep with the latest updates, you can also purchase the JDkernel update app JDkernel downloader
I was playing around with this this morning, and installed it over my MIUI ROM. I wiped Dalvik first, and flashed it. MIUI didn't really like it, even though I was using jcase's 1.8 ghz CM7 kernel with it. It caused it to bootloop (or what appeared to be a bootloop), but came out of it and loaded the ROM after about 6 loops. It ran fine after that, but then on a reboot, caused a ton of lag.
I now have it running on CM7 fine. I didn't overclock it, and am getting 2200 Quadrant scores running the 'lagfree' gov. Very snappy.
I know this is probably a pretty general question, but how does this kernel compare to the stock CM7 kernel?
Sent from my Incredible 2 using XDA App
v2 is out.
Updated with version 3.
This looks great. I will try it out. Smart ass governor did wonders on my dinc1.
So let me be sure here, Im running the current CM7 offered here, I can just run this zip in recovery over my current Rom.
Its from jdkoreclipse, I won't be downloading
Sent from my Incredible 2 using XDA App
Bobby Buggs said:
So let me be sure here, Im running the current CM7 offered here, I can just run this zip in recovery over my current Rom.
Click to expand...
Click to collapse
Yes sir.
Sent from my ADR6350 using Tapatalk
Snappyts said:
Its from jdkoreclipse, I won't be downloading
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
No one is forcing you to. Bye bye.
Sent from my ADR6350 using Tapatalk
Snappyts said:
Its from jdkoreclipse, I won't be downloading
Click to expand...
Click to collapse
WTF is that butthurt all about
can anyone explain what the differences are bw the governors offered by this kernel?
DroidDont said:
The man with a million accounts returns!
Click to expand...
Click to collapse
Excuse me?
trock79 said:
No one is forcing you to. Bye bye.
Sent from my ADR6350 using Tapatalk
Click to expand...
Click to collapse
He constantly got bashed on incredible 1 forums for stealing work, he was banned for awhile
Sent from my Incredible 2 using XDA App
In case you are wondering whether or not to download this kernel, hopefully this will help.
Take a look at this guy's signature here:
http://forum.xda-developers.com/member.php?u=2355353
That sig highlights the conquests of user JDKoreclipse aka rr12106, droidhacker26, m0rt4l s0ul, romflash, & k_chupe.
This is relevant because the kernel in this thread is being hosted at jdkoreclipse.com.
Snappyts said:
He constantly got bashed on incredible 1 forums for stealing work, he was banned for awhile
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
I understand that, but I have been working with him for over 6 months and he has helped me learn when most people wouldn't even respond. He has been trying to make good with all he did in the past but no one will give him a chance. Well hell I don't need to apologize for him- so read this POST Now back to the kernel. I will be taking over development of this very soon, maybe this weekend.
thenickisme said:
In case you are wondering whether or not to download this kernel, hopefully this will help.
Take a look at this guy's signature here:
http://forum.xda-developers.com/member.php?u=2355353
That sig highlights the conquests of user JDKoreclipse aka rr12106, droidhacker26, m0rt4l s0ul, romflash, & k_chupe.
This is relevant because the kernel in this thread is being hosted at jdkoreclipse.com.
Click to expand...
Click to collapse
Exactly, it seems he has apologized for his actions in the past, non the less everyone should be aware of the history before flashing one of his builds
Sent from my Incredible 2 using XDA App
Okay everyone, and let's get this thread back on topic. Has anyone else tried this with MIUI?
Sent from my Incredible 2 using XDA App
capcoward said:
Okay everyone, and let's get this thread back on topic. Has anyone else tried this with MIUI?
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
I was just about to ask the same thing.
This should work on any AOSP Rom.
IceandFire and eXistZ presents Apocalypse-Talon kernel.
Features
Backlight and screen dimmer, touch wake patch.
Voodoo Sound V10
Voodoo Color
Can be overclocked and allow undervolted.
Lazy governor.
Overclockable to 1440MHz
Overclocked to 1100MHz by default.
Uses Koush's Any kernel.
Sched_autogroup patch.
BLN for both i9020 and i9023
init.d scripts for Ezekeel's mod.
Added Deep Idle mod
etc
Changelog:
All the bug fixes for deep idle included.
Deep idle not active by default.
BLD, touch wake, screen dimmer fixes.
Added VR I/O scheduler and set it as default.
Tuned VR scheduler for better performance.
Battery can charged to 100%
BLX removed.
Installation:
Use CWM recovery to flash from sdcard.
Download:
Code:
http://www.multiupload.com/7JNNVCDC8C
Notes:
Works on Nexus S 4G.
Supports every rom.
For optimal performance, try it with iceandfire roms.
Thanks to:
Cyanogenmod team for sources.
eXistZ for helping me out.
Supercurio for voodoo patches.
Ezekeel for his mods and lazy governor.
Koush for any kernel template.
KalimochoAZ for battery charging tweak.
Morifc for helping me out.
RSVP...
Looking very interesting, I'll have to take this for a spin.
thanks
iceandfire said:
IceandFire and eXistZ presents Apocalypse-Talon kernel.
Features
Backlight and screen dimmer, touch wake patch.
Voodoo Sound V10
Voodoo Color
Can be overclocked and allow undervolted.
Lazy governor.
Overclockable to 1440MHz
Overclocked to 1100MHz by default.
Uses Koush's Any kernel.
Sched_autogroup patch.
BLN for both i9020 and i9023
init.d scripts for Ezekeel's mod.
Battery life eXtender.
Etc
Installation:
Use CWM recovery to flash from sdcard.
Download:
Code:
http://www.multiupload.com/8CVF5RTHZA
Notes:
Works on Nexus S 4G.
Supports every rom.
For optimal performance, try it with iceandfire roms.
Thanks to:
Cyanogenmod team for sources.
eXistZ for helping me out.
Supercurio for voodoo patches.
Ezekeel for his mods and lazy governor.
Koush for any kernel template.
Click to expand...
Click to collapse
so far so good! thanks Ice! im looking at undervolting it now and see how it performs. using it with petes 2.3.7 now. want to try it with your rom but want to keep google wallet running on a 2.3.7 rom lol! awesome work again!
I've only recently switched to the Nexus and have been getting dismal battery life (literally, 6 hours or so with light usage.)
Anyway, I will certainly be trying this out! Thanks for all your hard work!
Only got bootlooping
Sent from my Nexus S 4G using Tapatalk
anderson620 said:
I've only recently switched to the Nexus and have been getting dismal battery life (literally, 6 hours or so with light usage.)
Anyway, I will certainly be trying this out! Thanks for all your hard work!
Click to expand...
Click to collapse
I had same issue when I first got my ns4g, but after settling in on a rom and conditioning my battery, I'm consistantly getting about 18 hours of usable time. And I consider myself a fairly heavy user.....streaming Pandora and MLB, lots of browsing, texts, twitter etc..... and averaging about 4 hours of screen on time.
Cm nightlies
Matr1x 8.0 cfs
Clocked @ 1000 & 200 smartass v2
ahhhhh...........gone todash..............
enik_fox said:
Only got bootlooping
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Sounds like a bad download. Try redownloadingbit again see if that works.
Sent from my Nexus S 4G using xda premium
flashed this morning just fine, everything else seems aok. great addition to the nexus legacy.
thanks
Just flashed awhile ago and so far so good. I like the additional governors
First boot takes a while people so be patient.
Running CM7-Stable.
Is this a CM 2.6.35.14 based kernel?
Anyone got a working link? Thanks in advance.
Sent from my Nexus S 4G using xda premium
Comment:
Running this on CM7 Stable RC 7.1.0 and using the stock setting of SmartAssv2 governor I had to bump the bottom Mhz from 100 to 200 to stop lockups on my device....
Of course we know kernels can vary from device to device but it seems like it didn't like having to wake from 100 Mhz.
Looks interesting!
Question: How does the touch-wake feature impact the battery life? Anybody notice a significant difference?
zackandethan said:
Anyone got a working link? Thanks in advance.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Nevermind I got it finally
Sent from my Nexus S 4G using xda premium
so far so good i roasted it on top of kushdeck's 1.3e rom.
Edit: 200-800 MHz smart ass v2
Sent from my Nexus S 4G using xda premium
Works just as well as matrix does, great job!
derekwilkinson said:
Works just as well as matrix does, great job!
Click to expand...
Click to collapse
Lol
Sent from my HTC Sensation 4G using XDA App
mathkid95 said:
Lol
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
derekwilkinson said:
Works just as well as matrix does, great job!
Click to expand...
Click to collapse
you could almost say they are practically the same kernel
chalan30 said:
you could almost say they are practically the same kernel
Click to expand...
Click to collapse
Hmmmmmm lol
Sent from my Nexus S 4G
chalan30 said:
you could almost say they are practically the same kernel
Click to expand...
Click to collapse
They aren't.
Sent from my Nexus S using Tapatalk
GLaDOS for ICS
Based on GLaDOS V1.9 + Koush's ICS kernel patches.
Comes with all features of GLaDOS V1.9 plus debugging enabled and init.d support (thanks Flo).
Known issues:
1. BT is activated on boot and not soft blocked with rfkill when disabled. This causes only the DEEP IDLE state with TOP=ON to be used. You can manually disabled BT with 'echo 1 > /sys/devices/platform/bt_rfkill/rfkill/rfkill0/soft' using the terminal or adb shell, however this will break the BT switch until the next reboot. This is a problem with the ICS alpha ROM and I have informed Koush about it.
2. USB mass storage might not work on Linux machines or older OS without making some configurations on the OS side first; it did work ootb with Windows 7.
I am currently running this kernel with Koush's ICS CM9 alpha 11 release as my daily driver and I cannot guarantee it will work on other ROMs (chances are good
though).
As always I do not support OC/UV and if you decide to do so, you are on your own, however try raising the bus/GPU with Live OC (I currently use an OC value of 125) and with the new hardware-acceleration in ICS you can see the UI fly.
Download: http://www.multiupload.com/5AHEB0DJQ5
Sources: https://github.com/Ezekeel/GLaDOS-nexus-s/tree/glados + https://github.com/CyanogenMod/samsung-kernel-crespo/tree/ics
Update #1:
Added support for data usage limits (thanks Franco for sending me his .config).
Download: http://www.multiupload.com/DCIP6G25R6
Update #2:
Added DRAM scaling to Live OC.
Flash memory I/O tweaks.
Added Tiny Preemptive RCU.
Updated the optimized CRC32 algorithm.
Removed CFQ I/O scheduler.
Download: http://www.multiupload.com/9Z86UNGP4L
Update #3:
Added Bigmem option (increases RAM available for the system by 26MB).
Download: http://www.multiupload.com/2Z7D4WPXRP
Update #4:
Improved Bigmem option (increases available RAM by 27.5MB now).
Download: http://www.multiupload.com/5HOQB8LS3X
E Thanks for posting over here. I'm already using your kernel now.
Sent from my Android 4.0.1 Linux S 4G using xda premium
Thanks!
Follow the leader @corythug
This Kernel has all the goodies. Runs smooth and stable with great battery life. If you haven't tried it, you should. Thanks E, great ICS kernel.
Sent from my neXus s 4G
Whooo!!!!! Ezekeel's a recognized dev! Ya go ezekeel!
Thanks E its Rocking on AOSP's ROM
I'm getting a long pause on io dba writes with the quadrant benchmark. Not sure if its me or the kernel. I'm on aosp 13.
obsanity said:
I'm getting a long pause on io dba writes with the quadrant benchmark. Not sure if its me or the kernel. I'm on aosp 13.
Click to expand...
Click to collapse
Also data limit doesn't work.
mathkid95 said:
Whooo!!!!! Ezekeel's a recognized dev! Ya go ezekeel!
Click to expand...
Click to collapse
Thanks. Yeah. It just has been approved today.
obsanity said:
Also data limit doesn't work.
Click to expand...
Click to collapse
Hmm. I got all of Koush's patches and it should be fixed. Maybe I also need to activate something in .config. I will look into it.
Ezekeel said:
Thanks. Yeah. It just has been approved today.
Hmm. I got all of Koush's patches and it should be fixed. Maybe I also need to activate something in .config. I will look into it.
Click to expand...
Click to collapse
You need ipv6 iptables enabled in the config.
how does this compare with Matr1x?
how does this compare with Matr1x?
ztaccardi said:
how does this compare with Matr1x?
Click to expand...
Click to collapse
All personal preference so flash it and compare yourself. I used both kernel and they're awesome can't say anything bad about either.
Sent from my Android 4.0.1 Linux S 4G using xda premium
4g working?
is the 4g working on this rom?
dargwe said:
is the 4g working on this rom?
Click to expand...
Click to collapse
This is a kernel not a ROM.
Sent from my Android 4.0.1 Linux S 4G using xda premium
info[]box1 said:
This is a kernel not a ROM.
Sent from my Android 4.0.1 Linux S 4G using xda premium
Click to expand...
Click to collapse
Hahahahaha really people even the title of the thread says KERNEL
Sent from my neXus s 4G
FL0OD said:
Hahahahaha really people even the title of the thread says KERNEL
Sent from my neXus s 4G
Click to expand...
Click to collapse
Hey flood, Things are getting out of hand round here geessh lol.
Sent from my a Bugless Beast Linux S 4G using xda premium
info[]box1 said:
Hey flood, Things are getting out of hand round here geessh lol.
Sent from my a Bugless Beast Linux S 4G using xda premium
Click to expand...
Click to collapse
I think there are a lot of new folks that don't like to read.
Sent from my neXus s 4G
Added support for data usage limits (thanks Franco for sending me his .config).
Download: http://www.multiupload.com/DCIP6G25R6
Ezekeel said:
Added support for data usage limits (thanks Franco for sending me his .config).
Download: http://www.multiupload.com/DCIP6G25R6
Click to expand...
Click to collapse
Thanks Ez.
Request can you number the test zips? It's getting mixed up your previous ICS test builds. Really no sweat just a request.
Sent from my a Bugless Beast Linux S 4G using xda premium
Ezekeel, I have a couple questions for you, and sorry for a slight off-topic: which of the NS i9020s do you own (T/A/4G)? And is there any specific reason why you're using radio image KD1, as shown in your signature, which is not the most up-to-date?
IML74K Kernel
Credits: turl, isaacj, Michael Huang, erasmux, Mathieu Desnoyers, ezeekiel
Special thanks to:
- cyanogen,firefart,trock79 for the JDkernel app.
- Ziggy for teaching me how to patch kernels.
- Imoseyon for general help here and there.
So, its finally here! After rigorous testing, my testers and I feel that this kernel is acceptable for release. I spent the last few days squashing bugs and optimizing the kernel, testing it, and making sure it works well on the Maguro and Toro
Features:
JDKernel Updater App
CIFS
Optimized Smartass2 Cpufreq governor
Hotplug Cpufreq governor
Optimized LagFree Cpufreq governor
Patched as close to mainline as possible (3.0.14)
Overclock to 1.35ghz
CFQ IOSCHED
Undervolted a nice amount
removed some bloat
Using EXT4 for EXT2/3
GPU O/C
FAIR_SLEEPERS
Optimized makefile
Lowered default_dirty_ratio to 10
Lowered vfs_cache_pressure to 50
Swap enabled
SLQB slab allocater
other mods too small for me to remember.
CHANGELOG:
v1.1.2: Re-did source, removed some bloat, changed to CFQ, changed to SLQB, Undervolted, optimize smartass and Lagfree govs, removed interactiveX
v1.0.0.5: Initial release
DOWNLOAD: http://db.tt/lmbJ2nT6
Source: https://github.com/jdkernel/android-omap-tuna_3.0
PS:
There are 3 ways to donate for this work (whichever works for you):
1) Donate to Michael Huang by buying SetCpu
2) Donate to your favorite charity
3) Donate to me here: http://jdkoreclipse.net/donate.php
If you have any problems and need to hit me up in real time, go to my IRC channel here: http://jdkoreclipse.net/irc.php
so, just to make sure .... this kernel is NOT working with 4.0.2 or?
Thx for your work!
Use this Kernel with MONACO r8 and it runs like hell!
GTA 3 is working!
Sent from my Galaxy Nexus using xda premium
lordofcamster said:
Thx for your work!
Use this Kernel with MONACO r8 and it runs like hell!
GTA 3 is working!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Runs like hell? I don't quite know what to make of that!? I take it the phone gets quite hot?
Regards.
He means fast
Few pointers: why do you have swap? We don't need bloody swap in this devices. BFQ scheduler? BFQ is for rotational devices, we have flash devices. Why SLAB and no SLQB or SLUB? Why smartass2? Smartass2 isn't working good, even after changing the tunables for SMP. Why interactiveX? We already have interactive and it already has a built-in sysfs screen off freq parameter. Lagfree governor? It looks like Minmax to me.
Merry christmas!
i don't have any tech knowledge about kernels and such so i can't comment on franco's input but i have to agree with lordofcamster;
i'm too running the latest MCR release and together with this kernel the thing is really smooooth; oc'ed at 1350 ( 1125 uv ) with interactiveX governor
batterylife seems pretty ok too; i'm trying to drain the battery to see how much screen time i can get...
so far 2hrs + some minutes screen on and i'm down to 56% battery;
( in between i restarted the phone 5 times )
Sorry if this is a stupid question, but what does tuna refer to?
Sent from my Galaxy Nexus using Tapatalk
brian6685 said:
Sorry if this is a stupid question, but what does tuna refer to?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
see here
Battery is not at that great isnt it ?
leoaudio13 said:
Battery is not at that great isnt it ?
Click to expand...
Click to collapse
Well, the kernel is rather new. So no rapports yet. So stating the battery life isnt great, is premature
Heppieboeddah said:
Well, the kernel is rather new. So no rapports yet. So stating the battery life isnt great, is premature
Click to expand...
Click to collapse
Just my 2 cents . No offence here. Totally agree that still premature. Im testing it now
Sent from my Galaxy Nexus using xda premium
franciscofranco said:
Few pointers: why do you have swap? We don't need bloody swap in this devices. BFQ scheduler? BFQ is for rotational devices, we have flash devices. Why SLAB and no SLQB or SLUB? Why smartass2? Smartass2 isn't working good, even after changing the tunables for SMP. Why interactiveX? We already have interactive and it already has a built-in sysfs screen off freq parameter. Lagfree governor? It looks like Minmax to me.
Click to expand...
Click to collapse
Its the tone that creates the music.....My conclusion is: youre not really a person with musical skills.
justmy2cents
---------- Post added at 05:36 PM ---------- Previous post was at 05:31 PM ----------
leoaudio13 said:
Just my 2 cents . No offence here. Totally agree that still premature. Im testing it now
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Testing it as well. I am using Setcpu to UV a bit...Stolen from Franco...
http://rootzwiki.com/topic/13200-ke...x-mas-release/page__view__findpost__p__323808
franciscofranco said:
Few pointers: why do you have swap? We don't need bloody swap in this devices. BFQ scheduler? BFQ is for rotational devices, we have flash devices. Why SLAB and no SLQB or SLUB? Why smartass2? Smartass2 isn't working good, even after changing the tunables for SMP. Why interactiveX? We already have interactive and it already has a built-in sysfs screen off freq parameter. Lagfree governor? It looks like Minmax to me.
Merry christmas!
Click to expand...
Click to collapse
We've got this cool thing called PM (Private Message) on this great board. Give it a go sometime
Sent from my Galaxy Nexus
Heres my opinion: with this kernel, lags all over Settings, switching apps, market. But scrolling pages in menu is fine. Cant test battery atm as im almost out and need a recharge
OVERALL: u defo getting there but we need some minor tweaks here and there. Im so sorry that i cant help much as im not a kernel master but those r just my 2 cents
Sent from my Galaxy Nexus using xda premium
ScooterG said:
We've got this cool thing called PM (Private Message) on this great board. Give it a go sometime
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
This is a dev forum, not a chat board. I gave him my input to help him, I got nothing to hide from the users.
Sent from my Galaxy Nexus using xda premium
bk201doesntexist said:
see here
Click to expand...
Click to collapse
Gotcha, thanks
Sent from my Galaxy Nexus using Tapatalk
franciscofranco said:
This is a dev forum, not a chat board. I gave him my input to help him, I got nothing to hide from the users.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I know it might not sound like it, but Franco means well.
Sent from my Galaxy Nexus using xda premium
I've got lag in settings menu in every rom with every kernel...imho it's not a problem with this kernel
i agree franco or any other kernel lags in this situation..
With morfic's blessing, here's the continuation of the Trinity kernel in another form for AOSP Jellybean 4.2.
This was originally mainly developed for the Verizon SGS3, but some requests for a different versions were sent in. This is a blind build as I do not have a T-Mobile unit to test with. However, it has been tested and should work on T-Mobile.
Some highlights:
Code:
- Based on CM10.1 source
- Built with latest Linaro GCC 4.7 with optis
- Ramdisk tweaked (init.d support, unsecure)
- OC up to 1.836Ghz
- Stock GPU (OC makes no difference)
- Undervolted
- User voltage control
- Trinity colors
- Defaults to tweaked ondemand governor and row scheduler.
-- Available for user
--- Governor
---- msm-dcvs, interactive, conservative, ondemand, performance, wheatley, smoothass2, badass, asswax, dancedance, smartmax, ondemandplus
--- Scheduler
---- noop, deadline, row, cfq, sio, sioplus, bfq, zen
- USB Fast Charge (credit to imoseyon and chad)
- fsync control (credit Ezekeel)
- Removal of mpdecision, uses tweaked auto_hotplug driver (credit to thalamus)
- Removal of thermald
- fix_permissions added to zip
- CM wifi tether WPA/WPA2 secure support
- Faux sound mod support
To install (no need to wipe anything):
- Download .zip below and place on your internal or external sdcard
- Reboot into CWM or the recommended TWRP
- Flash .zip
- Reboot
Notes:
- If you do not default to ondemand/row, check your /system/etc/init.d/ for startup scripts or the /system/etc/init.qcom.post_boot.sh file to see if it's writing interactive/cfq to the scaling_governor and the scheduler.
I've pushed my build towards battery savings and it's been handling duties pretty well. Let me know how it works out for you. As with all things custom, please take all precautions (backups). Tested against CM, AOKP, BB7 and Carbon so far. Please let me know if you run into any issues.
Feel free to use your preferred kernel app for adjustments.
3.0.y Source - https://bitbucket.org/gideonx/bms_jb
3.4.y Source - https://bitbucket.org/gideonx/bms-jb-3.4.y
***** PLEASE CHECK WHICH ROM YOU ARE RUNNING. 3.0.y based roms can't use 3.4.y kernels and vice versa. *****
Download latest 3.0.y Build d2tmo - HERE
Download latest 3.4.y Build d2tmo - HERE
Thanks to morfic and all the devs! And to TheSeanTeam for posting and supporting this as long as they were able.
XDA:DevDB Information
BMS AOSP Kernel for d2tmo, Kernel for the T-Mobile Samsung Galaxy S III
Contributors
GideonX
Kernel Special Features:
Version Information
Status: Stable
Created 2013-11-11
Last Updated 2014-08-03
[KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo 3.0.y + 3.4.y 2013-05-12 Build
I am not the Dev of this kernel. I am simply a fan who wishes to share this awesome kernel with my fellow T-mobilites. GideonX has graciously agreed to 'port' us a version he originally created for the Verizon GS3 for our devices.
I've been using it for about two days and it's been very responsive and very battery friendly.
As I stated, I am just the messenger and not the Developer. Give all the thanks, donations and kudos to him. Please post and bugs and feedback and I will pass them on to him. He is quite busy so no etas please. Please treat this as a development thread. Thank you.
So without any further ado, I present the awesome BMS Kernel...
---
MOD Edit: Original OP
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-13]
First! Thanks OP and morfic and GideonX!
Sent from my SGH-T999 using xda app-developers app
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-13]
Always loved morfics work... Willing to try.
Sent from my SGH-T999 using Tapatalk 2
Got some good news!
GideonX said:
Voltage control will be available in the next version. Along with some more governors and more battery saving tweaks.
Click to expand...
Click to collapse
No ETA, but a new update is incoming. Can't wait as it sounds pretty great!
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-13]
About to flash, and will report findings. Been on stock cm kernel 4.2.2 for 3 days now with no issues (apart from cm issues) so changes will be obvious. Seriously looking forward to seeing Trinity color again. Thanks to op, morfic and GideonX
Sent from my SGH-T999 using xda premium
This Kernel has been working great with Liquid's 4.2.2. Only one that hasn't given me some type of annoying bug/problem. Anxious for the new version with voltage control. Thanks for your hard work :good:
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-13]
behappy said:
This Kernel has been working great with Liquid's 4.2.2. Only one that hasn't given me some type of annoying bug/problem. Anxious for the new version with voltage control. Thanks for your hard work :good:
Click to expand...
Click to collapse
Heads up... Got some good news. A new version with voltage control and additional governors coming real soon!
Woo Hoo! New version...
GideonX said:
The "Electrifying Posterior" Build 2013-02-20 - http://goo.gl/rTstL
- Sync'd to latest CM source
- User voltage control
- Added Wheatley, Smoothass2, Badass, Asswax
- cpu1 offlining/onlining adjustments via auto_hotplug
- Removal of debug and sec_debug, kernel went on a small diet.
Click to expand...
Click to collapse
O.P. Updated. Enjoy~
On a side note, the Dev suggested Wheatley/Row for governor settings... I've been using it for the last day or so and it's working really well.
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-20]
How can I enable fast charge after I've flashed the kernel? Thanks!
Sent from my SGH-T999 using xda premium
niphoet said:
How can I enable fast charge after I've flashed the kernel? Thanks!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Easiest way is to use a kernel app. I'm using Trickstermod from the play store, works just fine.
Edit: You can also turn it off and on by using terminal emulator and issuing either:
echo 1 > /sys/kernel/fast_charge/force_fast_charge (on)
or
echo 0 > /sys/kernel/fast_charge/force_fast_charge (off)
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-20]
GideonX said:
Easiest way is to use a kernel app. I'm using Trickstermod from the play store, works just fine.
Click to expand...
Click to collapse
I can't seem to get the setting to stick on boot with trickster mod "no frillz works fine"
Outside of that I'm running the kernel with Wheatley and row with tls's root box and couldn't be happier.
This is the only kernel I've flashed that I haven't had issues with .
So thanks again
Sent from my SGH-T999 using xda app-developers app
tdizzle404 said:
I can't seem to get the setting to stick on boot with trickster mod "no frillz works fine"
Outside of that I'm running the kernel with Wheatley and row with tls's root box and couldn't be happier.
This is the only kernel I've flashed that I haven't had issues with .
So thanks again
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
No frillz it is then
Hello friends... I just flashed this having Liquid 4.2.2 and I am still getting the T-Mobile page when using the tethering. Any suggestions? Thanks in advance.
BTW I have been doing some research and this seemed to be a possible solution but no luck.
tdizzle404 said:
I can't seem to get the setting to stick on boot with trickster mod "no frillz works fine"
Outside of that I'm running the kernel with Wheatley and row with tls's root box and couldn't be happier.
This is the only kernel I've flashed that I haven't had issues with .
So thanks again
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I'm using the exact same set-up. Very happy with everything so far.
latinsbest said:
Hello friends... I just flashed this having Liquid 4.2.2 and I am still getting the T-Mobile page when using the tethering. Any suggestions? Thanks in advance.
BTW I have been doing some research and this seemed to be a possible solution but no luck.
Click to expand...
Click to collapse
Check out this thread: http://forum.xda-developers.com/showthread.php?t=1931992
That should resolve your issue.
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-20]
Stupid question might get stupid answer but... How does this kernel work with the newest PACman ROM? I've been wanting to see what this baby is capable of and are there stock kernels out there just in case?
Sent from my SGH-T999 using xda premium
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-20]
Gorjira said:
Stupid question might get stupid answer but... How does this kernel work with the newest PACman ROM? I've been wanting to see what this baby is capable of and are there stock kernels out there just in case?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Should work. Back your stuff up just in case.
Re: [KERNEL][JB42][AOSP] ¤ BMS ¤ d2tmo [2013-02-20]
Gorjira said:
Stupid question might get stupid answer but... How does this kernel work with the newest PACman ROM? I've been wanting to see what this baby is capable of and are there stock kernels out there just in case?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
It'll work.
Sent from my SCH-I535