GLaDOS for ICS
Based on GLaDOS V1.9 + Koush's ICS kernel patches.
Comes with all features of GLaDOS V1.9 plus debugging enabled and init.d support (thanks Flo).
Known issues:
1. BT is activated on boot and not soft blocked with rfkill when disabled. This causes only the DEEP IDLE state with TOP=ON to be used. You can manually disabled BT with 'echo 1 > /sys/devices/platform/bt_rfkill/rfkill/rfkill0/soft' using the terminal or adb shell, however this will break the BT switch until the next reboot. This is a problem with the ICS alpha ROM and I have informed Koush about it.
2. USB mass storage might not work on Linux machines or older OS without making some configurations on the OS side first; it did work ootb with Windows 7.
I am currently running this kernel with Koush's ICS CM9 alpha 11 release as my daily driver and I cannot guarantee it will work on other ROMs (chances are good
though).
As always I do not support OC/UV and if you decide to do so, you are on your own, however try raising the bus/GPU with Live OC (I currently use an OC value of 125) and with the new hardware-acceleration in ICS you can see the UI fly.
Download: http://www.multiupload.com/5AHEB0DJQ5
Sources: https://github.com/Ezekeel/GLaDOS-nexus-s/tree/glados + https://github.com/CyanogenMod/samsung-kernel-crespo/tree/ics
Update #1:
Added support for data usage limits (thanks Franco for sending me his .config).
Download: http://www.multiupload.com/DCIP6G25R6
Update #2:
Added DRAM scaling to Live OC.
Flash memory I/O tweaks.
Added Tiny Preemptive RCU.
Updated the optimized CRC32 algorithm.
Removed CFQ I/O scheduler.
Download: http://www.multiupload.com/9Z86UNGP4L
Update #3:
Added Bigmem option (increases RAM available for the system by 26MB).
Download: http://www.multiupload.com/2Z7D4WPXRP
Update #4:
Improved Bigmem option (increases available RAM by 27.5MB now).
Download: http://www.multiupload.com/5HOQB8LS3X
E Thanks for posting over here. I'm already using your kernel now.
Sent from my Android 4.0.1 Linux S 4G using xda premium
Thanks!
Follow the leader @corythug
This Kernel has all the goodies. Runs smooth and stable with great battery life. If you haven't tried it, you should. Thanks E, great ICS kernel.
Sent from my neXus s 4G
Whooo!!!!! Ezekeel's a recognized dev! Ya go ezekeel!
Thanks E its Rocking on AOSP's ROM
I'm getting a long pause on io dba writes with the quadrant benchmark. Not sure if its me or the kernel. I'm on aosp 13.
obsanity said:
I'm getting a long pause on io dba writes with the quadrant benchmark. Not sure if its me or the kernel. I'm on aosp 13.
Click to expand...
Click to collapse
Also data limit doesn't work.
mathkid95 said:
Whooo!!!!! Ezekeel's a recognized dev! Ya go ezekeel!
Click to expand...
Click to collapse
Thanks. Yeah. It just has been approved today.
obsanity said:
Also data limit doesn't work.
Click to expand...
Click to collapse
Hmm. I got all of Koush's patches and it should be fixed. Maybe I also need to activate something in .config. I will look into it.
Ezekeel said:
Thanks. Yeah. It just has been approved today.
Hmm. I got all of Koush's patches and it should be fixed. Maybe I also need to activate something in .config. I will look into it.
Click to expand...
Click to collapse
You need ipv6 iptables enabled in the config.
how does this compare with Matr1x?
how does this compare with Matr1x?
ztaccardi said:
how does this compare with Matr1x?
Click to expand...
Click to collapse
All personal preference so flash it and compare yourself. I used both kernel and they're awesome can't say anything bad about either.
Sent from my Android 4.0.1 Linux S 4G using xda premium
4g working?
is the 4g working on this rom?
dargwe said:
is the 4g working on this rom?
Click to expand...
Click to collapse
This is a kernel not a ROM.
Sent from my Android 4.0.1 Linux S 4G using xda premium
info[]box1 said:
This is a kernel not a ROM.
Sent from my Android 4.0.1 Linux S 4G using xda premium
Click to expand...
Click to collapse
Hahahahaha really people even the title of the thread says KERNEL
Sent from my neXus s 4G
FL0OD said:
Hahahahaha really people even the title of the thread says KERNEL
Sent from my neXus s 4G
Click to expand...
Click to collapse
Hey flood, Things are getting out of hand round here geessh lol.
Sent from my a Bugless Beast Linux S 4G using xda premium
info[]box1 said:
Hey flood, Things are getting out of hand round here geessh lol.
Sent from my a Bugless Beast Linux S 4G using xda premium
Click to expand...
Click to collapse
I think there are a lot of new folks that don't like to read.
Sent from my neXus s 4G
Added support for data usage limits (thanks Franco for sending me his .config).
Download: http://www.multiupload.com/DCIP6G25R6
Ezekeel said:
Added support for data usage limits (thanks Franco for sending me his .config).
Download: http://www.multiupload.com/DCIP6G25R6
Click to expand...
Click to collapse
Thanks Ez.
Request can you number the test zips? It's getting mixed up your previous ICS test builds. Really no sweat just a request.
Sent from my a Bugless Beast Linux S 4G using xda premium
Ezekeel, I have a couple questions for you, and sorry for a slight off-topic: which of the NS i9020s do you own (T/A/4G)? And is there any specific reason why you're using radio image KD1, as shown in your signature, which is not the most up-to-date?
Related
IceandFire and eXistZ presents Apocalypse-Talon kernel.
Features
Backlight and screen dimmer, touch wake patch.
Voodoo Sound V10
Voodoo Color
Can be overclocked and allow undervolted.
Lazy governor.
Overclockable to 1440MHz
Overclocked to 1100MHz by default.
Uses Koush's Any kernel.
Sched_autogroup patch.
BLN for both i9020 and i9023
init.d scripts for Ezekeel's mod.
Added Deep Idle mod
etc
Changelog:
All the bug fixes for deep idle included.
Deep idle not active by default.
BLD, touch wake, screen dimmer fixes.
Added VR I/O scheduler and set it as default.
Tuned VR scheduler for better performance.
Battery can charged to 100%
BLX removed.
Installation:
Use CWM recovery to flash from sdcard.
Download:
Code:
http://www.multiupload.com/7JNNVCDC8C
Notes:
Works on Nexus S 4G.
Supports every rom.
For optimal performance, try it with iceandfire roms.
Thanks to:
Cyanogenmod team for sources.
eXistZ for helping me out.
Supercurio for voodoo patches.
Ezekeel for his mods and lazy governor.
Koush for any kernel template.
KalimochoAZ for battery charging tweak.
Morifc for helping me out.
RSVP...
Looking very interesting, I'll have to take this for a spin.
thanks
iceandfire said:
IceandFire and eXistZ presents Apocalypse-Talon kernel.
Features
Backlight and screen dimmer, touch wake patch.
Voodoo Sound V10
Voodoo Color
Can be overclocked and allow undervolted.
Lazy governor.
Overclockable to 1440MHz
Overclocked to 1100MHz by default.
Uses Koush's Any kernel.
Sched_autogroup patch.
BLN for both i9020 and i9023
init.d scripts for Ezekeel's mod.
Battery life eXtender.
Etc
Installation:
Use CWM recovery to flash from sdcard.
Download:
Code:
http://www.multiupload.com/8CVF5RTHZA
Notes:
Works on Nexus S 4G.
Supports every rom.
For optimal performance, try it with iceandfire roms.
Thanks to:
Cyanogenmod team for sources.
eXistZ for helping me out.
Supercurio for voodoo patches.
Ezekeel for his mods and lazy governor.
Koush for any kernel template.
Click to expand...
Click to collapse
so far so good! thanks Ice! im looking at undervolting it now and see how it performs. using it with petes 2.3.7 now. want to try it with your rom but want to keep google wallet running on a 2.3.7 rom lol! awesome work again!
I've only recently switched to the Nexus and have been getting dismal battery life (literally, 6 hours or so with light usage.)
Anyway, I will certainly be trying this out! Thanks for all your hard work!
Only got bootlooping
Sent from my Nexus S 4G using Tapatalk
anderson620 said:
I've only recently switched to the Nexus and have been getting dismal battery life (literally, 6 hours or so with light usage.)
Anyway, I will certainly be trying this out! Thanks for all your hard work!
Click to expand...
Click to collapse
I had same issue when I first got my ns4g, but after settling in on a rom and conditioning my battery, I'm consistantly getting about 18 hours of usable time. And I consider myself a fairly heavy user.....streaming Pandora and MLB, lots of browsing, texts, twitter etc..... and averaging about 4 hours of screen on time.
Cm nightlies
Matr1x 8.0 cfs
Clocked @ 1000 & 200 smartass v2
ahhhhh...........gone todash..............
enik_fox said:
Only got bootlooping
Sent from my Nexus S 4G using Tapatalk
Click to expand...
Click to collapse
Sounds like a bad download. Try redownloadingbit again see if that works.
Sent from my Nexus S 4G using xda premium
flashed this morning just fine, everything else seems aok. great addition to the nexus legacy.
thanks
Just flashed awhile ago and so far so good. I like the additional governors
First boot takes a while people so be patient.
Running CM7-Stable.
Is this a CM 2.6.35.14 based kernel?
Anyone got a working link? Thanks in advance.
Sent from my Nexus S 4G using xda premium
Comment:
Running this on CM7 Stable RC 7.1.0 and using the stock setting of SmartAssv2 governor I had to bump the bottom Mhz from 100 to 200 to stop lockups on my device....
Of course we know kernels can vary from device to device but it seems like it didn't like having to wake from 100 Mhz.
Looks interesting!
Question: How does the touch-wake feature impact the battery life? Anybody notice a significant difference?
zackandethan said:
Anyone got a working link? Thanks in advance.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Nevermind I got it finally
Sent from my Nexus S 4G using xda premium
so far so good i roasted it on top of kushdeck's 1.3e rom.
Edit: 200-800 MHz smart ass v2
Sent from my Nexus S 4G using xda premium
Works just as well as matrix does, great job!
derekwilkinson said:
Works just as well as matrix does, great job!
Click to expand...
Click to collapse
Lol
Sent from my HTC Sensation 4G using XDA App
mathkid95 said:
Lol
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
derekwilkinson said:
Works just as well as matrix does, great job!
Click to expand...
Click to collapse
you could almost say they are practically the same kernel
chalan30 said:
you could almost say they are practically the same kernel
Click to expand...
Click to collapse
Hmmmmmm lol
Sent from my Nexus S 4G
chalan30 said:
you could almost say they are practically the same kernel
Click to expand...
Click to collapse
They aren't.
Sent from my Nexus S using Tapatalk
Galaxy Nexus uses a UNIFIED kernel architecture. To reduce duplication, check here for ALL Galaxy Nexus kernel information:
http://forum.xda-developers.com/showthread.php?p=20756209
History:
http://forum.xda-developers.com/showpost.php?p=20756222&postcount=2
reserved 2
This is working spectacularly friend! Thank you kindly for sharing your optimized kernel with our new and growing Sprint community. I can safely say, that this is personally, the best kernel I've used so far on my Galaxy Nexus. If you need any sort of help with menial tasks, I'd be willing to donate my time. I have basic experience(compiling stock AOSP-without tweaks),so I can't do anything you don't know how to do already..however I can assist in any way I'd be useful.*If you don't need help with anything(which is understandable) I'd appreciate any tips or suggestions. This is a great project. Looking forward to seeing what else you'll be doing with the Linux kernel. Anyone who hasn't tried this--you should give it a chance. It might surprise you.
Open Beta may not be stable and may cause issues with your phone!
By loading open beta you have agreed to:
1. To report all random reboots with associated /proc/last_kmsg
2. To provide feedback on errors or bugs with detail phone information such as ROM, kernel version, and apps
3. Participate in Forum discussions for the beta software with others without FLAMING each other or post useless information such as:
a) Phone doesn't boot (without providing any additional information, ROM versions etc)
B) phone is too hot (without providing any additional information, ie OC freq, UV etc)
The Open Beta system is designed to have the community help each other and the developers. This way, all potential bugs are flushed out so the final released version will be stable and error free. The more actively you participate in Beta Testing the better the final product will be (you are really helping yourself to create a better community software).
If you do NOT agree with the statements above, DO NOT load my Open Beta software.
Kernel 017 Open Beta 4 is out!
https://twitter.com/#!/faux123/status/197752449950433280
[ build 4 ] (back to ultimate again)
back ported Android LMK and RAMConsole from Mainline Linux 3.4+ to 3.0
forward ported OMAP4 DSS Gamma control settings from Panda Board Linux 2.6.32 kernel
http://en.wikipedia.org/wiki/Gamma_correction (this gamma correction is done in the framebuffer, so it is a SOFTWARE correction, different from the Gamma Hacks by supercurio which is more of a Hardware gamma correction and are totally independent from each other. My own recommendation is value of 6)
there are 10 preset gamma tables.
0 ==> disable gamma correction
1~10 ==> selects the gamma tables
5 ==> gamma of 1.0
to change:
Code:
su
echo 5 > /sys/devices/platform/omapdss/manager0/gamma
[ build 3 ] (back to ultimate again)
Added Scheduler Load balancing patches
Added Coupled CPU Idle engine (WIP)
[ build 2 ] (back to ultimate again)
Patched to Linux 3.0.30
Added latest Google Interactive Gov patches
Added ARM VFP patches
Added TI TWL Codec patches
Added my own SmartReflex Bypass capability! 1.42/1.48 GHz are stable again (this would allow unofficial OPPs to run with SmartReflex without causing crashes due to aggressive UV)
[ build 1 ] (Mainline version, No GPU OC, No ZRAM, No CleanCache)
Disabled Pre-UV
Disabled Custom Voltage Control
Enabled TI SmartReflex 1.5
Updated to latest Google Interactive governor
Patched Audio Codec from TI
Faux123, did you do any kernel work with the Evo? May not have been but seems like I remember you and the kernels you did kicked ass! Will be downloading this when I get home.
pastert33 said:
Faux123, did you do any kernel work with the Evo? May not have been but seems like I remember you and the kernels you did kicked ass! Will be downloading this when I get home.
Click to expand...
Click to collapse
Not directly. There were many people who forked my kernels and adapted them for the EVO and several other devices. So it was indirect. I mainly work on the phones I own. I occasionally build kernels for the phones very similar to the ones I own but not very often.
Just wondering, how's the battery life with this kernel? I'm looking for the most battery efficient kernel out there.
Sent from my Galaxy Nexus using Tapatalk 2
Downloading now
Sent from my Galaxy Nexus using xda premium
This is a great kernel. Very fast & smooth.
Sent from my Sprint Galaxy Nexus CDMA using xda premium
How do I fix the purple tint on the screen from flashing this kernel I using V.017b. Great kernel tho besides the purple tint
Sent from my Galaxy Nexus using xda premium
snoopy1e11 said:
How do I fix the purple tint on the screen from flashing this kernel I using V.017b. Great kernel tho besides the purple tint
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Older 016 kernel has the pre-sets at 60, 60, 60. The 017 kernel has 0,0,0 so you will need to re-adjust your color/gamma settings.
What app works best at changing color/gamma settings or should I say which do you use
Sent from my Galaxy Nexus using xda premium
snoopy1e11 said:
What app works best at changing color/gamma settings or should I say which do you use
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Everyone's screen is different. AOKP and CM9 both have color/gamma controls built-in... Not sure about others, I only use AOKP myself.
I'm using stock rom ics 4.04. I notice in your orignal post it only works for up to 4.03. Anything coming out for 4.04 or will one of the linked kernels work. Really looking to improve battery life.
Thanks!
bankO_mAn said:
I'm using stock rom ics 4.04. I notice in your orignal post it only works for up to 4.03. Anything coming out for 4.04 or will one of the linked kernels work. Really looking to improve battery life.
Thanks!
Click to expand...
Click to collapse
016m and 016u both work with 4.0.4...the original post says 4.0.3/4.0.4. So far this kernel has gotten me the best battery life out of all of the kernels posted in this section.
kernel 017 is official!
faux123 said:
kernel 017 is official!
Click to expand...
Click to collapse
Sweet thanks!
faux123 said:
kernel 017 is official!
Click to expand...
Click to collapse
Faux123 which version do you recommend for heavy users so basically which version of 17 has best battery life 17m?
Sent from my Sprint Galaxy Nexus CDMA using xda premium
I'd go for 17m if you want the longest life.
I would like to thank for all help and support
morfic, interloper, chris41g and talustus
Now to the kernel.
This kernel is for TW (stock based) JB roms only.
It will not work/boot with any of AOSP/AOKP/CM roms.
Current version is 0.4.3
This kernel is based on Samsung latest MA06 JB source
I'll be adding more features to and and will update thread as I go.
Flashed it on my phone. So far everything working.(2 hrs and counting).
- Upgraded to Linux version 3.0.71
- Available Schedulers
NOOP, CFQ, NOOP, DEADLINE, ROW, SIO - init.d support
- custom bootanimation support
- WiFi confirmed working.
- Added AGAT initlogo.lre
- Added Hotplug support. CPU1 is offline when is not needed.
- Available governors.
Adaptive, Lagfree, Ondemand, Performance, Hotplug, Userspace, Knoonservative - 64 GB SD Card support (don't have card to test it tho). Hope you guys can confirm it's working.
- OC'd to 1.97 GHz
- May be something else I can't recall.
Link:
v0.4.3
http://d-h.st/Wqb
Updated to Linux version 3.0.71. Fixed bootanimation support. It's working now.
v0.4.1 (MA06 source)
AGAT_JB_v0.4.1.zip
Added ROW and SIO I/O schedulers. Hotplug governor. Some source clean up.
Upgrade to Linux version 3.0.68
Edits for better deep sleep.
v0.4.0 (MA06 source)
AGAT_JB_v0.4.0.zip
v0.3.2
Small edits, clean up. Added SIO and VR schedulers
AGAT_JB_v0.3.2.zip
v0.3.1
added UC/UV/UC support.
AGAT_JB_v0.3.1.zip
v0.3.0
Updated to Linux version 3.0.48
AGAT_JB_v0.3.0.zip
v0.2.0
Added hotplug support and few governors. Updated to Linux 3.0.35
AGAT_JB_v0.2.0.zip
v0.1.0
AGAT_JB_v0.1.0.zip
If anyone wanna try to compile here link to my github:
https://github.com/agat63/AGAT_JB_kernel
I'll try to keep it up to date as I add features to it.
Enjoy.
reserved just in case I need it.
Thanks AGAT, can't wait to see this thing oc'd:beer: i'm hoping for 2.1GHz fingers crossed...
Can't wait. Your kernel kept me from jumping to the JB leaks until clark44 just released his rom.
Sent from my SPH-L710 using xda premium
Will this work on at&t running dragon Rom base on sprint leak jb?
Sent from my htc_jewel using xda premium
sgs2_1.6 said:
Will this work on at&t running dragon Rom base on sprint leak jb?
Sent from my htc_jewel using xda premium
Click to expand...
Click to collapse
I don't know.
If sprint's rom/kernels running on it this might run as well
But try it at your own risk.
Already yes
tmcwilliam01 said:
Can't wait. Your kernel kept me from jumping to the JB leaks until clark44 just released his rom.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Same here, I was really just waiting for source so I knew a custom kernel was close behind the roms
Version 0.2.0 is up and running,
Added few governors, hotplug support, Updated to linux 3.0.35.
Enjoy.
Does this support custom voltages? If so, what would be the recommended app for adjusting them
Sent from my SPH-L710 using xda app-developers app
JBakey said:
Does this support custom voltages? If so, what would be the recommended app for adjusting them
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
+1?
Sent from my SPH-L710 using Tapatalk 2
I tried ktoonservative and deadline and was getting some weird "hot restarts". Not sure how to explain it.
Compusmurf said:
I tried ktoonservative and deadline and was getting some weird "hot restarts". Not sure how to explain it.
Click to expand...
Click to collapse
Did you clear cache/Dalvik after flashing and then fixing permissions?
Ramondel said:
Did you clear cache/Dalvik after flashing and then fixing permissions?
Click to expand...
Click to collapse
Hey there Ramon... And thanks Agat!
Sent from my SPH-L710 using Tapatalk 2
OC UV Support?
Agat, will you be updating this so that we can OC and UV in the future, I know that this is just the second version on JB but I loved what you did with the ICS version. Thanks in Advanced TIA.
Ramon
Ramondel said:
Did you clear cache/Dalvik after flashing and then fixing permissions?
Click to expand...
Click to collapse
Of course and that's the only governor that exhibits it so far in my testing.
So does this give better battery?
Samsung Galaxy S III
Compusmurf said:
Of course and that's the only governor that exhibits it so far in my testing.
Click to expand...
Click to collapse
Have you tried Ktoonservative and Noop? This is what I am using and it is working fine. I am currently running a stress test using SetCPU and after 126891ms there were no errors from the CPU.
Ramon
Upstreammiami said:
So does this give better battery?
Samsung Galaxy S III
Click to expand...
Click to collapse
Supposed to, please try and report, the more the merrier... Thanks
Sent from my SPH-L710 using Tapatalk 2
Upstreammiami said:
So does this give better battery?
Samsung Galaxy S III
Click to expand...
Click to collapse
It should because if you use the correct governor it will ensure that the second CPU is in sleep mode unless it is needed to process phone requests. I have used Agat's kernel with ICS Roms like FreeGS3 and it has run great.
Ramon
Hi all! On the behalf of Synergy Team & Ziggy!
Zigg471 Well known for his work! I'm part of his SynergyTeam! Last night he made me a kernel for d2att Galaxy S3 SGH-I747! Gave me perms to post it up! So Everything Goes to Ziggy! I tested it ! It works! So Huge thanks to him!
Initial Release :
Features :
FOR TW ROMS
Here's a down and dirty log
Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release
OC'd to 1.9GHz
Undervolted slightly
sysfs vdd interface
Lagfree and SmartAssv2, both with full sysfs interface
FastCharge, default is off
exFat /should/ work, worked on a 4GB card, 64GB is in route
Plenty of other tweaks in the config files, and more to come! etc etc
Other features..? Just let me know and we will work it out!
Download & Source Links at #2!
Kindly! If you wanna donate to Ziggy ! Here
Hit Thanks If You Like To!
Download & Source Links! Changelogs !
Project Page :- http://projects.ziggy471.com/projects/ziggy471-sgs3-jb
Source : http://projects.ziggy471.com/projects/ziggy471-sgs3-jb/repository
Download : http://projects.ziggy471.com/projects/ziggy471-sgs3-jb/files
Changelog :-
Cheers..!
Just in case!
Teaser : SynergyRom is on the way..
Me & Eschelon (SynergyRom for VZW GS3) are working on it..
first...
worth trying
Is this for ics, tw, jellybean 4.1.2, 4.2.1? Probably need to let people know.
Sent from my SGH-I747 using Tapatalk 2
Just tried it on cm10.1 and wouldn't boot up. Had to restore from recovery.
Sent from my SAMSUNG-SGH-I747
It's For TouchWiz Roms! I tested it on 4.1.1!
Can't wait to try this on my s3.I remember doggy kernels from the EVO 3d days
Sent from my HTC One XL using xda premium
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
Ziggy
Sent from my HTC One XL using xda premium
glad to see a variety of new devs for this device was getting kinda bored with the same old roms and shi, totally gonna tryout the kernel thanks!
Gordietm said:
Just tried it on cm10.1 and wouldn't boot up. Had to restore from recovery.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
From OP:
"Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release."
Thanks Eaglerazor! Nice to see Ziggys work again. He had the best kernel for the HTC TBOLT.
Is there way to enable FastCharging?
nklenchik said:
From OP:
"Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release."
Click to expand...
Click to collapse
That doesn't indicate if its CM or TW. CM kernels are based on source from Samsung same as TW. OP should be updated to indicate TW-based kernel which I see has been done.
eaglerazor123 said:
FOR TW ROMS
Click to expand...
Click to collapse
InstigatorX said:
That doesn't indicate if its CM or TW. CM kernels are based on source from Samsung same as TW. OP should be updated to indicate TW-based kernel.
Click to expand...
Click to collapse
For me that means TW only roms
CheateR92 said:
For me that means TW only roms
Click to expand...
Click to collapse
Agreed :good:
I just done some benchmark tests and they are pretty good in terms stock or ktoonsez kernel ( I've tried few configs about KT, but nothing like this one ) So the results are:
Quadrant: 6653
AnTuTu: 10469
Vellamo: Metal 627, HTML5 1889
20mins (on screen) doing benchmarks 5% battery
EDIT: @eaglerazor123 can you add date to the topic? It is easier to check for newer versions
And to ask again is it possible to ON the Fast Charging? In the very first post you say it is off by default so it means it can be enabled?
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Loved Synergy in the past. Can't wait to give it a shot on here.
dawen said:
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Voltage Control is a good one.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
dawen said:
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I found an app that I use with my nexus 7 called Trickster Mod.. you should check it out gives you a lot of extra options to control the kernel
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
-------------------------------------------------------------------------------------------
Files, app:
www . Der Kernel . com
Kernel Source: https://bitbucket.org/morfic/trinity_ten
http://goo.gl/tUkg9A Trinity 10 KitKat 4.4.3 kernel Build 1
-------------------------------------------------------------------------------------------
Featuring:
Build optimizations
Performance through research
Static UV
GPU OC to 600+ MHz
Removed wasteful debugging
VM, Governor tweaks
row, sio added
fsync control
2000MHz (Use an app that protects the sysfs files to not have OS meddle with freqs)
Bullshít Free (Not pushing buzzwords to drop them later like others)
Morfic! Awesome to see you here . loved your nexus s kernels !
Sent from my Nexus 4 using Tapatalk 2
great morfic! looking forward to rock the trinity kernels on my n10. i've been using your kernels since the nexus s days so welcome here :good:
lol. I have a purchased version of TKT. Just removed it yesterday from my Nexus 10. Today, I see there is support for Nexus 10 and have to install it again.
Best regards,
Finally, trinity for my nexus 10!
Sent from my Nexus 7 using xda app-developers app
Oh wow this is so awesome
We've been seeing a lot of development for nexus 10 this past week and now trinity is here.
Keep the development coming! Looking forward to this
King of Rapture™ said:
lol. I have a purchased version of TKT. Just removed it yesterday from my Nexus 10. Today, I see there is support for Nexus 10 and have to install it again.
Best regards,
Click to expand...
Click to collapse
FYI, Trickster also now works on the Nexus 10. Not sure if the Play Store has been updated yet for it but the latest Manta beta version supports everything that Trickster normally does
Looking forward to doing some testing with this kernel as well.
i am using LIQUIDSMOOTH rom and i flash this kernel and i get stock at boot
rubene66 said:
i am using LIQUIDSMOOTH rom and i flash this kernel and i get stock at boot
Click to expand...
Click to collapse
Not for cm
Sent from my Liquid ROM filled Nexus 10
Bataga said:
Not for cm
Sent from my Liquid ROM filled Nexus 10
Click to expand...
Click to collapse
Isn't liquid aosp based?
Sent from my Nexus 4 using xda premium
jarjar124 said:
Isn't liquid aosp based?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
It contains some CM tweaks if you read the Liquid ROM OP. Those CM tweaks are probably what's causing the bootloop. I'm assuming the ROM has to be pure AOSP based.
Pure Aosp based? That's a bit difficult. I'm also on Liquid smooth.
Sent from my Nexus 7 using xda premium
Lim Wee Huat said:
Pure Aosp based? That's a bit difficult. I'm also on Liquid smooth.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
This kernel works with MMuzzyROM and PA. I'm sure morfic (morfique?) will update it eventually to work on CM.
404 ERROR said:
This kernel works with MMuzzyROM and PA. I'm sure morfic (morfique?) will update it eventually to work on CM.
Click to expand...
Click to collapse
Should work on aokp too, right?
Sent from my Galaxy Nexus using Tapatalk 2
dreitzell78 said:
Should work on aokp too, right?
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I'm not a dev nor do I have any dev knowledge, so I don't know. It's not the fact that it has "CM" parts in it that doesn't make it work, but CM has a tweak in there that makes this kernel bootloop. If AOKP also has the tweak, then it's going to bootloop as well.
Just make a nandroid and try it.
Hey Morfic do you think we'll see a gamma and display calibration tool in the near future?
Fidelator said:
Hey Morfic do you think we'll see a gamma and display calibration tool in the near future?
Click to expand...
Click to collapse
ktoonz stated that samsung took something out for this so it will be very likely to do that.
jarjar124 said:
ktoonz stated that samsung took something out for this so it will be very likely to do that.
Click to expand...
Click to collapse
Someone found the drivers with mDNIe support for our screen (or at least they were named the same way as ours) on a Samsung's site.
Fidelator said:
Someone found the drivers with mDNIe support for our screen (or at least they were named the same way as ours) on a Samsung's site.
Click to expand...
Click to collapse
who is that someone and which is that samsung site?
each time i talk to supercurio about mDNIe, he ends up commenting how it's not "real mDNIe", if it was it would be nice (not implying i talked to him about N10)