Develop Bugs

[Q] CWM 6; how to mount the internal SD-card trying to restore my note II

I ended in a semi-brick problem :crying:, starting my n7100 Note 2 after flashing the ALJ1 stock Firmware with Odin.
A. How did I configured Odin before flashing:
- PDA with stock firm N7100XXALJ1_N7100PHNALJ1_N7100XXALIH_HOME.tar,
- Auto reboot and Rest time checked but ....
- I fear the Nand erase also was checked
B. What was the result ????
- Note 2 Starts up but doesn't passes the SAMSUNG logo (hangs).
C. What can I still do now?
1. I do have a CWM backup on the externa SD
2. I still can open in the download mode and use Odin
3. I still can open up in CWM 6 recovery mode and manage it
D. What did I already tried to do?
a. I tried restoring from the external SD but cannot pass the mounting of the internat SD (have to wait 20 sec for SDcard to mount but without succes witch results i also can't store rhe data
b.I tried repartioning with the "pit 7100", witch also fails
c. I searched for more than 6 hours for a solution, specified for the note 2, but don't find a shure solution; f.e. [HOW-TO] Unbrick your soft bricked Galaxy S III - xda-developers_php;
articles about mount SD using Heidmat, All in one]Stock ROM N7100 +How to Root N7100 & Reset counter , CWM Recovery 6.0.1.5 for N7100, and so on, and so on ...
d. Finally bag for help and most and of all
specially call for a solution on the xda-expert-developers, Cardiologists for Android patients :angel:
Thanks in advance,
El

I searched yesterday, half a day on this exellent site but did not found, or did not dare to try some adequate applications
So, I bag in the present case to make an appointment with Dr. Ketan, Cardiologists for Android patients :angel:

elner0 said:
I ended in a semi-brick problem :crying:, starting my n7100 Note 2 after flashing the ALJ1 stock Firmware with Odin.
A. How did I configured Odin before flashing:
- PDA with stock firm N7100XXALJ1_N7100PHNALJ1_N7100XXALIH_HOME.tar,
- Auto reboot and Rest time checked but ....
- I fear the Nand erase also was checked
B. What was the result ????
- Note 2 Starts up but doesn't passes the SAMSUNG logo (hangs).
C. What can I still do now?
1. I do have a CWM backup on the externa SD
2. I still can open in the download mode and use Odin
3. I still can open up in CWM 6 recovery mode and manage it
D. What did I already tried to do?
a. I tried restoring from the external SD but cannot pass the mounting of the internat SD (have to wait 20 sec for SDcard to mount but without succes witch results i also can't store rhe data
b.I tried repartioning with the "pit 7100", witch also fails
c. I searched for more than 6 hours for a solution, specified for the note 2, but don't find a shure solution; f.e. [HOW-TO] Unbrick your soft bricked Galaxy S III - xda-developers_php;
articles about mount SD using Heidmat, All in one]Stock ROM N7100 +How to Root N7100 & Reset counter , CWM Recovery 6.0.1.5 for N7100, and so on, and so on ...
d. Finally bag for help and most and of all
specially call for a solution on the xda-expert-developers, Cardiologists for Android patients :angel:
Thanks in advance,
El
Click to expand...
Click to collapse
after installing from new firmware from odin make wipe cache partition ! it worked with my galaxy ace also

[Q] Softbrick Samsung Gio

Hello there,
I have a problem with my samsung gio device. I decided to update the unofficial cyanogenmod, but the install interrupts and aborted.
Now I can boot until the Samsung logo came. An other Forum gave me the hint, that the devica has a softbrick.
They gave me also the hint to the following manual.
http://forum.xda-developers.com/showthread.php?t=1573628
I tried to do this manual, but I dont undersstand what to do in Point 3.
Could anyone help me and try out a step by step manual for me, that I can unbrick my Samsung mobile?
Thanks a lot! :fingers-crossed:

just flash a cwm 5.0.2.8 or a newer one because you use cyanomod rom use ext4 only
download one,put your phone in download mode power menu and volume down togetter.
connect phone with computer
start odin see that phone is recognised
insert the cwm clicking one package and put the package in odin(see odin how to)
flash...

devrieshh said:
just flash a cwm 5.0.2.8 or a newer one because you use cyanomod rom use ext4 only
download one,put your phone in download mode power menu and volume down togetter.
connect phone with computer
start odin see that phone is recognised
insert the cwm clicking one package and put the package in odin(see odin how to)
flash...
Click to expand...
Click to collapse
Hello,
I got the error, you could see on the attached picture.
Do you know why?
EDIT:
I tried rhe following instruction and it works until the reboot. The gio interrupt the rebbot. There is only the samsung logo shown.

see this link,you should insert the cwm as one package
also dont forget to insert the gio_v1.0. ops file(not cooper ofcourse )see example this file is in the odin 4. version if not in odin3
http://androidworld.nl/forum/samsun...to-one-package-firmware-flashen-via-odin.html

can u give downloaded cyogenmod package full name?
if cy7.x flash this cwm: px-cwm
if cy9.x flash this cwm: cwm6 itisichan
if cy10.x flash this cwm: ma6kernel cm10.1
and if not unbreak wipe data + format system + format dalvik
and flash another rom...

[Q] my note 2 is dead, i need help

i have a galaxy note 2 N7100
stock rom, not rooted and no custom recovery
i wanted to format it, so i opened the stock recovery and i did:
wipe data factory reset
then
wipe cache partition
then restarted the phone, but it was not restarting, just showing the Samsung galaxy note 2 logo
so i tried to go on to the download mode, and using odin i tried to install custom recovery but it is failed, then i tried to install stock rom again using odin also but it is failed
then i opened the stock recovery again, and i received so many red color message all starting with :
can't mount / cache
can't mount / ......
as seen in the picture
what can i do ??

anasdera said:
i have a galaxy note 2 N7100
stock rom, not rooted and no custom recovery
i wanted to format it, so i opened the stock recovery and i did:
wipe data factory reset
then
wipe cache partition
then restarted the phone, but it was not restarting, just showing the Samsung galaxy note 2 logo
so i tried to go on to the download mode, and using odin i tried to install custom recovery but it is failed, then i tried to install stock rom again using odin also but it is failed
then i opened the stock recovery again, and i received so many red color message all starting with :
can't mount / cache
can't mount / ......
as seen in the picture
what can i do ??
Click to expand...
Click to collapse
How much is your phone's internel partition?
Flash .pit file if you've 16GiB Note 2: http://d-h.st/Dlv
Reboot your phone in download mode by pressing and holding vol. down + menu key and then power key.
Select above pit file from PC Odin under PIT tab and start flashing.

also what rom were you using? sotck 4.3?
Sent from my GT-N7100 using Tapatalk

restore note 2
anasdera said:
i have a galaxy note 2 N7100
stock rom, not rooted and no custom recovery
i wanted to format it, so i opened the stock recovery and i did:
wipe data factory reset
then
wipe cache partition
then restarted the phone, but it was not restarting, just showing the Samsung galaxy note 2 logo
so i tried to go on to the download mode, and using odin i tried to install custom recovery but it is failed, then i tried to install stock rom again using odin also but it is failed
then i opened the stock recovery again, and i received so many red color message all starting with :
can't mount / cache
can't mount / ......
as seen in the picture
what can i do ??
Click to expand...
Click to collapse
I advice you to restore your phone this way:
Go to sammobile download the latest 4.3 rom from your country.(1+ gb file)
download odin 3.09
flash it with ONLY autoreboot and reset time marked.
DON''T! INTERUPT THE FLASHING OR YOU HAVE A DEAD PHONE.
and use an original cable with about 80% battery.
After the flashing process you see this:
A flashing blue light with the samsung logo.
Short time later the light goes out and you can enter your phone to configurate your settings.
In the worst case if the phone hangs at the samsung logo
go into recovery
Wipe data / factory reset
Wipe cache partition
and reboot
Let me know if your interested you can root the phone further (safe).

note 2
m.b.jikre said:
How much is your phone's internel partition?
Flash .pit file if you've 16GiB Note 2:
Reboot your phone in download mode by pressing and holding vol. down + menu key and then power key.
Select above pit file from PC Odin under PIT tab and start flashing.
Click to expand...
Click to collapse
thanks, my phone is 16 GB
i tried this way, but failed also
odin said there is no PIT partition
what can i do ?

anasdera said:
thanks, my phone is 16 GB
i tried this way, but failed also
odin said there is no PIT partition
what can i do ?
Click to expand...
Click to collapse
First check if you can claim the warrenty at service centre. Post your current os version, and country.

anasdera said:
i have a galaxy note 2 N7100
stock rom, not rooted and no custom recovery
i wanted to format it, so i opened the stock recovery and i did:
wipe data factory reset
then
wipe cache partition
then restarted the phone, but it was not restarting, just showing the Samsung galaxy note 2 logo
so i tried to go on to the download mode, and using odin i tried to install custom recovery but it is failed, then i tried to install stock rom again using odin also but it is failed
then i opened the stock recovery again, and i received so many red color message all starting with :
can't mount / cache
can't mount / ......
as seen in the picture
what can i do ??
Click to expand...
Click to collapse
You can using odin and install the latest rom in your phone

anasdera said:
i have a galaxy note 2 N7100
stock rom, not rooted and no custom recovery
i wanted to format it, so i opened the stock recovery and i did:
wipe data factory reset
then
wipe cache partition
then restarted the phone, but it was not restarting, just showing the Samsung galaxy note 2 logo
so i tried to go on to the download mode, and using odin i tried to install custom recovery but it is failed, then i tried to install stock rom again using odin also but it is failed
then i opened the stock recovery again, and i received so many red color message all starting with :
can't mount / cache
can't mount / ......
as seen in the picture
what can i do ??
Click to expand...
Click to collapse
Here's the detailed steps to install the Stock Firmware for your device:
1. Head to the download page, this is the UNmodified firmware provided ‘as is’ from Samsung/carrier servers.
2. After download is complete, extract the downloaded file and you should get a MD5 file.
3. Enter the download mode form your device [normally by holding the volume up button + home button + power button]
4. Connect your device to your PC.
5. Start Odin.
6. Odin should recognize your device, and you can tell so by seeing that the first slot from the upper left is taken, if not then you need to install a driver for your device. [I personally just download Kies and it automatically download the proper driver for your device]
7. Click on PDA from Odin and browse to the extracted MD5 file.
8. Press Start.
9. Do not unplug your device until the process is fully completed.
10. The phone will reboot and you should see a Pass! on Odin, which means the process was successfully accomplished.
Don't proceed with any step of the past steps unless you fully understand every single one of them, if you have any difficulties understanding anything feel free to ask!

[Q] Help needed for a HARD bricked Galaxy sIII I747

Plz help. Here is what happened. I messed up my device so bad it won't turn on or do ANYTHING. I was thinking about getting a jig( if those even work in my case) or having it J-Tagged, but those are MY LAST OPTIONS! I need help really bad and I know I messed up but if anyone knows how to fix it, any help will be gratefully accepted. Thanks.

Beau Billings said:
Plz help. Here is what happened. I messed up my device so bad it won't turn on or do ANYTHING. I was thinking about getting a jig( if those even work in my case) or having it J-Tagged, but those are MY LAST OPTIONS! I need help really bad and I know I messed up but if anyone knows how to fix it, any help will be gratefully accepted. Thanks.
Click to expand...
Click to collapse
Welcome to the forum! You need to provide more information than you have for anyone to be able to help. What device model and carrier is it? How did you get to the bricked state? Were you flashing any firmware? If so, what? What's the firmware history - Android version etc? Recovering from a brick isn't always a hard thing and we do it all the time. We would, however, need to know more.

Model #
Larry2999 said:
Welcome to the forum! You need to provide more information than you have for anyone to be able to help. What device model and carrier is it? How did you get to the bricked state? Were you flashing any firmware? If so, what? What's the firmware history - Android version etc? Recovering from a brick isn't always a hard thing and we do it all the time. We would, however, need to know more.
Click to expand...
Click to collapse
Hello, the model is the Samsung Galaxy SIII SGH-I747 and the carrier is AT&T. Well I tried rooting it with Team epic root, it didn't work then I tried to flash the stock rom and that didn't work either. It then was hard bricked.

Look up debrick method =) you'll need a SD card
Sent from my SAMSUNG-SGH-I747 using Tapatalk

pcshano said:
Look up debrick method =) you'll need a SD card
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Thanks, could you provide a link please. I only have a 8gb microsd will that mess it up?

Beau Billings said:
Thanks, could you provide a link please. I only have a 8gb microsd will that mess it up?
Click to expand...
Click to collapse
Please go to the thread below. All the instructions and files you need can be found on the first page. You will need a micro SD card with, at least, 16Gb capacity. Won't work with an 8Gb card.
http://forum.xda-developers.com/showthread.php?t=2549068

Larry2999 said:
Please go to the thread below. All the instructions and files you need can be found on the first page. You will need a micro SD card with, at least, 16Gb capacity. Won't work with an 8Gb card.
http://forum.xda-developers.com/showthread.php?t=2549068
Click to expand...
Click to collapse
Hey, so i got the sd card and did the write of the image to it but, the phone turns on but when i try to send it to download mode it lingers there then flashes to samsung then thats it. So wtf?

Beau Billings said:
Hey, so i got the sd card and did the write of the image to it but, the phone turns on but when i try to send it to download mode it lingers there then flashes to samsung then thats it. So wtf?
Click to expand...
Click to collapse
The debrick card lets the phone boot by simulating the internal workings of the device. To get the phone to start working normally, you would have to work your way up the food chain to a full 4.3 stock firmware restore. It won't work any other way. Normally, you should be able to boot into download/recovery modes as well as system with the debrick card. If it won't boot to download mode, you may need to get a USB jig. Here's what we need to do then ....
1) Download the 4.3 stock restore image from the thread below ...
http://forum.xda-developers.com/showthread.php?t=2658486
2) Boot to system with the debrick card and copy the stock restore zip above to your phone's internal storage
3) Power off your phone. Boot into download mode - either with the Volume Down/Power/Home button combo or with a USB jig.
4) Flash custom recovery -TWRP or CWM- via Odin. You can download the Odin flashable *.Tar file for TWRP from the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
5) After successfully flashing custom recovery, remove the battery to avoid rebooting to system, replace the battery and reboot to (custom) recovery with Volume Up/Power/Home buttons
6) Select install and navigate to the stock restore zip you saved earlier. Select this file and swipe to confirm installation. Wait for firmware installation to complete
7) Clear cache/dalvik and reboot to system
Hope this works for you. Good luck!

Larry2999 said:
The debrick card lets the phone boot by simulating the internal workings of the device. To get the phone to start working normally, you would have to work your way up the food chain to a full 4.3 stock firmware restore. It won't work any other way. Normally, you should be able to boot into download/recovery modes as well as system with the debrick card. If it won't boot to download mode, you may need to get a USB jig. Here's what we need to do then ....
1) Download the 4.3 stock restore image from the thread below ...
http://forum.xda-developers.com/showthread.php?t=2658486
2) Boot to system with the debrick card and copy the stock restore zip above to your phone's internal storage
3) Power off your phone. Boot into download mode - either with the Volume Down/Power/Home button combo or with a USB jig.
4) Flash custom recovery -TWRP or CWM- via Odin. You can download the Odin flashable *.Tar file for TWRP from the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
5) After successfully flashing custom recovery, remove the battery to avoid rebooting to system, replace the battery and reboot to (custom) recovery with Volume Up/Power/Home buttons
6) Select install and navigate to the stock restore zip you saved earlier. Select this file and swipe to confirm installation. Wait for firmware installation to complete
7) Clear cache/dalvik and reboot to system
Hope this works for you. Good luck!
Click to expand...
Click to collapse
Many thanks. I am trying this process as I type. And how do I copy to internal if the computer doesn't recognize it?

Thanks so much!!!!!
beau billings said:
many thanks. I am trying this process as i type. And how do i copy to internal if the computer doesn't recognize it?
Click to expand...
Click to collapse
i got my baby back! Thank you so much! Everybody that helped i am so grateful for in this process!

Beau Billings said:
i got my baby back! Thank you so much! Everybody that helped i am so grateful for in this process!
Click to expand...
Click to collapse
Glad to know it worked for you!

Larry2999 said:
The debrick card lets the phone boot by simulating the internal workings of the device. To get the phone to start working normally, you would have to work your way up the food chain to a full 4.3 stock firmware restore. It won't work any other way. Normally, you should be able to boot into download/recovery modes as well as system with the debrick card. If it won't boot to download mode, you may need to get a USB jig. Here's what we need to do then ....
1) Download the 4.3 stock restore image from the thread below ...
http://forum.xda-developers.com/showthread.php?t=2658486
2) Boot to system with the debrick card and copy the stock restore zip above to your phone's internal storage
3) Power off your phone. Boot into download mode - either with the Volume Down/Power/Home button combo or with a USB jig.
4) Flash custom recovery -TWRP or CWM- via Odin. You can download the Odin flashable *.Tar file for TWRP from the link below ...
http://techerrata.com/file/twrp2/d2att/openrecovery-twrp-2.6.3.1-d2att.tar
5) After successfully flashing custom recovery, remove the battery to avoid rebooting to system, replace the battery and reboot to (custom) recovery with Volume Up/Power/Home buttons
6) Select install and navigate to the stock restore zip you saved earlier. Select this file and swipe to confirm installation. Wait for firmware installation to complete
7) Clear cache/dalvik and reboot to system
Hope this works for you. Good luck!
Click to expand...
Click to collapse
Hi
I have SGH-i747 it was Bricked before but i solute this problem by Debrick Micro SD card ( 16G class10)
then i Flash it by Odin with this ROM( I747UCUEMJB 4.3 ) and its ok
but the problem is the device not booting normally or its not booting up ( system , download mode and recovery ) without Debrick SD card !!!!!!???????
i have installed custom recovery philz_touch_6.07.9 and making wipe data , cache and Dalvik and stay no booting up without Debrick SD card
pleas any one help me

[Q] Failed to flash ROM, SGW doesn't boot

Hi everybody,
sorry for bothering you, but I think I might need some help.
I tried to flash ParanoidAndroid (first try ever to flash a smartphone) but failed 'somehow'.
Initial steps to create the problem
Initial Status: Gingerbread on a Galaxy W; Pretty old and pretty messed up
Download the update.zip to root the smartphone => Becoming root worked!
Download ParanoidAndroid
Download Clockwork Recovery
Created backups using Titanium Backup as root.
Copied ParanoidAndroid to the GalaxyWs internal sd card (yes, this was my mistake)
Wipe cach partition => It said, it worked, I don't know if it did
Rebooted phone => all fine
Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Status of the problem
Bootup shows Samsung Logo
Bootup than shows GalaxyW-Screen Logo
Bootup than shows the android recovery symbol OR directly reboots
When trying to open the recovery menu, every second time I get the message "Updating (...) Installing MultiCSC... Can't access /system/csc/DBT/system"
If opening recovery menu works, I can only acces the internal storage of the galaxy to install an update (tried the paranoidandroid several times, it doesn't work)
When plugging in the galaxy w to my USB port, I don't get an USB storage shown on my 2 laptops (1 "Windows 7", 1 "Ubuntu 14.0?" )
neither odin (4.43) nor Heimdall are able to flash any files.
So, simple question, what can I do next?
-I cannot copy clockworkmod to my smartphone
-I don't know if I can easily overwrite the kernel or the bootloader.
I searched the forum but didn't find a clear solution, so sorry if this special configuration was already asked.
Thanks for your help and best regards
FrankyDroid

FrankyDroid said:
[*]Rebooted into recovery mode applied update from SD-Card=> Selected ParanoidAndroid.zip => ErrorMessage (I think it was something like file corrupt, sorry I'm not sure about the specific words, but it sounded like this is no updatefile or this file is not a valid zip file.
Click to expand...
Click to collapse
Your ROM's download has been cut either by a connection issue or by you, That is why I always have a backup rom in my SD Card. Also For kitkat, make sure you got CWM 6.0.4.5 or higher. Personally i use PhilZ Touch Recovery. It is simple enough for me. And odin recognizes your phone only in download mode. So make sure you go to download mode then plug the phone in. And also make sure while working with odin, unplug all USBs and other phones

Hey MayB4ck,
thank you for the tips, I finally got it running Using Philz Touch Recovery. Works like hell
Best regards
FrankyDroid